LG LSW350B User guide

Install Manual

Wall mounting bracket

Please read this manual carefully before operating your set and retain it for future reference.

LSW350B

P/NO: MFL63640564 (1410-REV00)

www.lg.com

COMPONENT

Wall mount anchor 6 units

Wall mount screw 6 units

Install manual

Safety clip 2 units

Guide spacer 4 units

Set protection cushion 4 units

Guide space screw 4 units (M6X43 mm)

IMPORTANT SAFETY INSTRUCTIONS

-If you are a professional installer, please read this manual carefully before installing the product.

-If you are a professional installer, please give this manual to the user after installing the product and ensure that the user also reads the manual carefully and retains it for future reference.

After reading the manual, please keep it handy for future reference.

Warning

The product should be installed by a qualified	The product should be installed where its weight
professional specified by the retail store.	can be fully supported.
Product installation by non-qualified personnel is very	If the product is installed on a weak surface, the
dangerous and may cause personal injury.	product may fall, causing injury.
When moving or replacing the product after	Do not hang on this product, protect the product
installation, contact a qualified installer specified	from severe impacts after the installation.
by the retail store.	The product may fall and cause injury.
Installation or movement of the product must be carried
out by a skilled professional. If an unqualified person
moves and installs the product, it may cause safety risks.
Be sure not to hang the power cable and signal
cable on the back of TV when installing the wall-
mounted TV.
Damaged cables may result in fire, electric shock, or
damage to the product.

2

Caution

Follow the instructions in this manual to product	To install or adjust the height of the product, two
properly.	or more people are needed.
If you do not follow these instructions, the product	If you try to install or move the product alone, it may
may be installed incorrectly and cause serious injury	fall and cause injury or the product may become
or the product may become damaged.	damaged.
When installing the product, first check that the	When drilling holes into the wall, make sure you
wall is strong enough. Use the anchors and	use a drill and drill bit with the specified diameter.
screws provided.	Ensure that you also follow the instructions
If you use anchors and screws that are not specified	regarding the depth of the holes.
by the manufacturer, they may not hold the weight of	Otherwise, the product may be installed incorrectly
the product, causing safety issues.	and cause safety issues.
Do not clean the product with a wet towel, and do	Keep this product away from sprinklers, sensors,
not place a heater, or humidifier beneath it.	high-tension wires and power sources. Do not
Moisture, steam or heat permeating into this product	install it in a location where vibrations or impacts
may result in fire, electric shock or product damage.	are likely to occur.
Make sure that the power cord is removed from	Wear safety gloves when installing the product.
the outlet before installing the product.	Do not use your bare hands.
Otherwise, it may cause an electric shock or fire.	Otherwise, it may cause personal injury.
Be sure to use the accessory cable provided.
Otherwise, friction between the product and the
wall may cause damage to the connector.

BEFORE INSTALLATION

*Do not use the product for purposes other than mounting a display on the wall.

*When installing/using the wall mount, be cautious of product damage and avoid accidents.

*Install the wall mount according to the installation manual.

*If you have not fully read and understood the installation manual, do not install the product and contact the dealer to have a specialized installer install the product for you.

*Even if you are not a specialized installer, it is advantageous to have experience in mechanical or construction field in completely understanding this manual and installing the product.

*Install the product only on a vertical wall.

The manufacturer is not responsible for issue from installing the product on an angled wall or on the ceiling.

*Check that the accessories provided with the product are all included before installing. LG Electronics is not liable for any damage or loss of accessories after the package has been opened.

*Keep the included accessories out of reach of babies or children as it can cause safety issues including suffocation from swallowing the parts.

*Make sure screws are tight against the wall, but do not overtighten.

Applying excessive force to screws may damage to the wall, affect the product performance, or cause the product to become damaged.

*Be careful not to install a TV that exceeds the weight restrictions of the wall mount.

*Be careful with the tools used during installation to prevent accidents or damage.

--Tools you will need - Phillips head + driver (manual or motorized) / 8 mm socket wrench / Level / Stud finder / Drill. You may also need an Ø 4 mm drill bit for wood (or steel) or an Ø 8 mm drill bit for concrete.

<![if ! IE]>

<![endif]>ENGLISH

3