11. General Information....................................................................................................... 42
6
LGE CDMA Fixed Wireless Telephone
LSP-340
Highlights
Congratulations on your purchase of the LSP-340 Fixed Wireless Telephone. This
telephone has been designed to operate on the latest digital mobile communications
technology. This technology has greatly enhanced voice clarity and can provide various
advanced features.
The telephone provides:
z 3-line LCD Display with status indicator
z A choice of 10 ring sounds
z A menu driven interface with prompts for easy operation
z Last Number Redial
z Speed Dialing with a 99-number memory
z Dial tone
z ROH (Receiver Off-Hook) tone
z Adjustable Ring Volume
z Internal Back-up Battery Pack
z AC Power Supply
z Dipole Antenna
z DB9 Data Port for service and repair
z Speaker phone
7
LGE CDMA Fixed Wireless Telephone
LSP-340
1. Important Information
1.1 Safety Information
Warning
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Do not use this product near swimming pools or other bodies of water.
IMPORTANT
Before installing or operating this product read this information.
1.2 Optimal Phone Performance
z Do not operate your product when holding the antenna, or when someone is within four
inches (ten centimeters) of the antenna. Holding the antenna affects call quality and may
cause the telephone to operate at a higher power level than needed.
z For the best call quality, keep the antenna free from obstructions and point the antenna
straight up.
z Do not use the unit with a damaged antenna. Have your antenna replaced by a qualified
technician immediately. Use only a manufacturer-approved antenna. Non-approved
antennas, modifications, or attachments could impair call quality, damage the phone.
z RF energy may affect improperly installed or inadequately shielded personal medical
devices such as pace markers, hospital monitor. Consult the manufacturer of any
personal medical devices to determine if they are adequately shielded from external RF
energy. Turn your terminal OFF in health care facilities when any regulations posted in
the areas instruct you to do so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
z If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the distance between the radio or television and the telephone.
- Connect the equipment into an outlet on a circuit different from that to which the
terminal is connected.
- Consult you Authorized LGE Dealer of an experienced radio/TV technician for help.
z Use only the battery, antenna and AC power supply provided by LGE. Using any other
type will invalidate the warranty.
z Only authorized personnel should service the phone and its accessories. Faulty
installation or service any be dangerous and may invalidate the warranty.
z Do not use the unit in designated “no cellular phone use” area.
z Avoid exposure to high temperature or humidity.
z Avoid wetting the unit with any liquids. If the unit gets wet, turn the power off immediately
and remove the backup battery and AC power supply. If the unit is inoperable, then return
to the service agent for service.
z Avoid shock or impact.
8
LGE CDMA Fixed Wireless Telephone
LSP-340
z We recommend you to charge the backup battery before initial use. Backup battery may
be discharged during delivery.
1.3 Care and Service
z Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna
cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
z If the unit fails for any reason, do not attempt to disassemble; contact the telephone
service provider for assistance.
z If any of the following conditions exist; unplug the unit at the wall plug, remove battery,
and call the service provider.
- The power supply cord is damaged or frayed.
- Liquid has been spilled into the unit.
- The unit has been exposed to rain or water.
- The unit has been dropped or damaged.
- The unit does not work normally by following the operating instructions.
9
LGE CDMA Fixed Wireless Telephone
LSP-340
2. Introduction
2.1 Front View of the Telephone
1) Menu / Softkey 1: Activate MENU state (also MENU state in the call state)
2) Message : Activate SMS state
3) End : Deactivate a state – No store a value
4) Recall / Softkey 2 : Activate RECALL state / Choose next state
5) Clear(Cancel) : Delete the last digit/dial number(also exit without storing in the MENU state)
6) Redial /Flash : Flash function in the call state / Dial the last dialed number
7) Volume Left (◀): Volume-(also function as a cursor in the edit state)
8) Volume Right (▶): Volume+(also function as a cursor in the edit state)
9) Speaker phone
10
LGE CDMA Fixed Wireless Telephone
LSP-340
2.2 LCD Display
The LCD shows icons on the top of the LCD screen.
Different indicator appears based on the phone's operating mode.
1) RSSI indicator : Indicates the signal strength in the service area.
2) No service : The phone is not receiving system signal.
3) In use : Displayed when call is in progress or the phone is in off-hook and dial tone
heard.
: No service : In use
4) Text message : Displayed when a text message is received.
5) Voice message : Displayed when a voice message is received.
6) Alarm : Displayed when wake up alarm time was setting.
7) Caller ID : Displayed when caller ID is received.
You should follow each step carefully as shown below in order to guarantee proper
operation of CDMA Fixed Wireless Telephone.
STEP I. Check Components
z Fixed Wireless Terminal is supplied with the following standard unit and accessories;
1. LSP-340 Main Unit with Handset -1EA-
2. Dipole Antenna-1EA-
3. Backup Battery-1EA-
4. User Guide-1EA-
5. AC/DC Power Adapter-1EA-
6. Power Cord(Only SMPS Adapter)-1EA-
z Please make sure that these components are present before you begin the unit
installation. And then compare the following figures and components. If components
are missing or damage is found, contact the store where you purchased the unit
immediately.
STEP II. Place the Terminal
z Place the terminal on the stable flat secure surface area (desk, table, etc.). Serious
damage may result if the unit falls. Do not place the unit on, or within 1 meter of
heaters or radiators. This unit is designed for desktop usage. Avoid direct exposure to
the sun lights and damp area.
z Read the SAFETY INFORMATION located at the first part of this document before you
place the terminal.
STEP III. Connect Components (See the figures in “Installation Steps”.)
z Connect the antenna to the TNC antenna connector located at the top side of the
terminal. If you placed the terminal on the flat surface, bend the antenna up right.
z Connect curl cord of handset assembly to the RJ-11C port located at the left side of
the terminal.
z Open the battery case, securely connect the battery cord, place the backup battery
pack and close the case.
z Connect the AC/DC Adapter cable to the DC input port located at the topside of the
terminal.
-. If it is good, beep tone is heard.
-. If it is not good(Booting is fail or beep tone is not heard), you have to connect the
adapter or backup battery, again.
z Please follow the below to get better voice quality;
1. Keep away from electrical appliances such as TV, computer, radio and so on.
2. Keep terminal in a high and central location with no obstructions, such as metal
walls.
3. Raise the integral antenna of terminal to get maximum strength of receive signal
as shown figure at the next page.
12
LGE CDMA Fixed Wireless Telephone
LSP-340
STEP IV. Check the LCD Display
z After you follow the installation instruction step I to step III, please check the LCD for
normal operation.
z
If you may not see status of service, please repeat the 5th instruction of step III. And
conform Fixed Wireless Telephone to get the proper signal strength from service
operator system.
※
The adapter type(with power cord) may be different by country adaptation.
13
LGE CDMA Fixed Wireless Telephone
LSP-340
2.4 Installation Steps
Please follow the below procedure to install the unit properly.
Connect Basehandset to the
handset connector.
Bend the antenna
up right.
Insert back-up
battery in the
bottom of the unit.
(give care to
polarity)
When you use
terminal first, please
Turn “on” the battery
switch.
Connect the
antenna to the
TNC connector
(Turn right).
Open the
battery cover
at the bottom
of the unit.
Replace the
Battery cover.
Connect the AC
power supply.
Notice
Before using the terminal, please check battery switch is on.
After switching on it, use the phone.
14
Loading...
+ 29 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.