How it Works
LG
Loading...
LSP2000A
Users manual
40 pgs561.79 Kb0

LG LSP2000A Users manual

Download
ATTACHMENT M – USER’S MANUAL
© 2001 PCTEST Lab
CDMA Fixed Wireless Telephone
User Guide
Model: LSP-2000A
WARNING! Read this information before use
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.
To comply with FCC RF exposure requirements, a minimum separation distance of
2.5cm (1 inch) must be maintained between the user/bystander and the back of the unit, including the antenna.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
i
LGE CDMA Fixed Wireless Telephone
3
LSP-2000A
REVISED HISTORY
DATE ISSUE CONTENTS OF CHANGES REMARK
2001/01/04 ISSUE
0.1
Initial Release
LGE CDMA Fixed Wireless Telephone
4
LSP-2000A
CONTENTS
Highlights
1. Important Information
1.1 Safety Information ....................................................................................................8
1.2 Optimal Phone Performance ....................................................................................8
1.3 Care and Service................................................................ ...................................... 9
2. Introduction
2.1 Front View of the Telephone...................................................................................10
2.2 LCD Display............................................................................................................11
2.3 Installation ..............................................................................................................12
2.4 Installation Steps.................................................................................................... 14
3. Basic Operation
3.1 Making a Call..........................................................................................................15
3.2 Redialing Last Outgoing Number............................................................................15
3.3 Receiving a Call .....................................................................................................16
3.4 Signal Strength.......................................................................................................16
3.5 Missed Call Message .............................................................................................16
4. List of Menu State
4.1 Select Volume ........................................................................................................17
4.2 Ring Type Selection ...............................................................................................18
4.3 Wake-up Time........................................................................................................19
4.4 Security ................................................................................................................... 19
4.5 Convenient Features..............................................................................................21
4.6 Additional Feature ..................................................................................................22
................................................................................................................................7
..................................................................................................8
.................................................................................................................10
..........................................................................................................15
......................................................................................................17
4.1.1 Ring Volume
4.1.2 Key Volume
4.1.3 Ear Volume
4.4.1 Lock Mode Set ...............................................................................................19
4.4.2 Clear Calls ..................................................................................................... 20
4.4.3 Clear Memory.........................................................................................................20
4.4.4 Emergency Call ...................................................................................................... 20
4.4.5 Changing Lock Code..............................................................................................20
4.5.1 Hot Line..................................................................................................................
4.5.2 Hot Line Time.........................................................................................................21
4.5.3 Speed Dial(enable/disable)....................................................................................21
4.6.1 Key-tone Length.....................................................................................................22
4.6.2 Auto Time-out.........................................................................................................22
4.6.3 3 Minute Alert.........................................................................................................22
...................................................................................................17
....................................................................................................18
....................................................................................................18
21
LGE CDMA Fixed Wireless Telephone
5
LSP-2000A
4.6.4 DS Mode Set..........................................................................................................22
5. Features while in a Call
.............................................................................................23
5.1 Ear Volume............................................................................................................. 23
5.2 MIC Volume............................................................................................................23
5.3 Mute........................................................................................................................ 23
5.4 Memo................................ ...................................................................................... 24
5.5 Transmitting your own number................................................................................24
6. Searching, Editing & Dialing...............................................................................25
6.1 Retrieving Last Call History.................................................................................... 25
6.2 Retrieving Phone Number by Address...................................................................26
6.3 Retrieving Phone Number by Name.......................................................................27
7. SMS(Short Message Service)
...................................................................................28
7.1 Check & Deleting Received Message....................................................................28
7.1.1 Text Message..................................................................................................28
7.1.2 Voice Message................................................................................................ 29
7.2 Erasing Message....................................................................................................29
8. Beside Functions
........................................................................................................30
8.1 Redial .....................................................................................................................30
8.2 Viewing your own number ....................................................................................... 30
9. Storing Phone Number........................................................................................31
9.1 Storing / Editing Phone Numbers........................................................................... 31
9.1.1 Storing Phone Numbers .................................................................................. 31
9.1.2 Erasing Stored Phone Numbers.......................................................................32
9.2 Finding Stored Phone Numbers
10. General Information
....................................................................................................36
....................................................................................33
LGE CDMA Fixed Wireless Telephone
6
LSP-2000A
Highlights
Congratulations on your purchase of the LSP-2000A Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features.
The telephone provides:
l 3-line LCD Display with status indicator l A choice of 10 ring sounds l A menu driven interface with prompts for easy operation l Last Number Redial l Speed Dialing with a 99-number memory l Dial tone l ROH (Receiver Off-Hook) tone l Adjustable Ring Volume l Internal Back-up Battery Pack l AC Power Supply
l
Dipole Antenna
l DB9 Data Port for service and repair
LGE CDMA Fixed Wireless Telephone
7
ipment into an outlet on a circuit different from that to which the
LSP-2000A
1. Important Information
1.1 Safety Information
Warning
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water.
IMPORTANT
Before installing or operating this product read this information.
1.2 Optimal Phone Performance
l Do not operate your product when holding the antenna, or when someone is within four
inches (ten centimeters) of the antenna. Holding the antenna affects call quality and may cause the telephone to operate at a higher power level than needed.
l For the best call quality, keep the antenna free from obstructions and point the antenna
straight up.
l
Do not use the unit with a damaged antenna. Have your antenna replaced by a qualified technician immediately. Use only a manufacturer-approved antenna. Non-approved antennas, modifications, or attachments could impair call quality, damage the phone.
l RF energy may affect improperly installed or inadequately shielded personal medical
devices such as pace markers, hospital monitor. Consult the manufacturer of any personal medical devices to determine if they are adequately shielded from external RF energy. Turn your terminal OFF in health care facilities when any regulations posted in the areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
l
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the distance between the radio or television and the telephone.
- Connect the equ
terminal is connected.
- Consult you Authorized LGIC Dealer of an experienced radio/TV technician for help.
l Use only the battery, antenna and AC power supply provided by LGE. Using any other
type will invalidate the warranty.
l Only authorized personnel should service the phone and its accessories. Faulty
installation or service any be dangerous and may invalidate the warranty.
l Do not use the unit in designated “no cellular phone use” area. l Avoid exposure to high temperature or humidity. l Avoid wetting the unit with any liquids. If the unit gets wet, turn the power off
immediately and remove the backup battery and AC power supply. If the unit is inoperable, then return to the service agent for service.
l Avoid shock or impact. l We recommend you to charge the backup battery before initial use. Backup battery may
LGE CDMA Fixed Wireless Telephone
8
LSP-2000A
be discharged during delivery.
1.3 Care and Service
l Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna
cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
l If the unit fails for any reason, do not attempt to disassemble; contact the telephone
service provider for assistance.
l If any of the following conditions exist; unplug the unit at the wall plug, remove battery,
and call the service provider.
- The power supply cord is damaged or frayed.
- Liquid has been spilled into the unit.
- The unit has been exposed to rain or water.
- The unit has been dropped or damaged.
- The unit does not work normally by following the operating instructions.
LGE CDMA Fixed Wireless Telephone
9
2 4 5 6 7
LSP-2000A
2. Introduction
2.1 Front View of the Telephone
1
3
Hook Switch
Base Handset
DB-9 Port
Used for data communication or service personnel.
Soft Key 1
Displays main menu features and also used as soft key while setting menu items in sub-field.
Message Button
Press to view text or voice message.
End Button
11
Soft Key 2
Displays recall menu feature and also used as soft key while setting menu
items in sub-field. Volume Up/Down Button
Used for volume control and scroll
through menu.
Clear Button
Press to erase displayed letters, numbers
or returns to the previous menu option. Redial Button
Press to dial the last dialed number or
display its own number.
10
12
8 9
LGE CDMA Fixed Wireless Telephone LSP-2000A
Exit all the way out of a menu back to the phone's standby display without changing any setting.
Speaker Button : Speaker Phone
Dipole Antenna
2.2 LCD Display
The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode.
1) RSSI indicator : Indicates the signal strength in the service area.
2) No service : The phone is not receiving system signal.
3) In use : Displayed when call is in progress or the phone is in off-hook and dial tone heard.
: No service : In use
4) Text message : Displayed when a text message is received.
5) Voice message : Displayed when a voice message is received.
6) Alarm : Displayed when wake up alarm time was setting.
7) Caller ID : Displayed when caller ID is received.
8) OUT : Going out.
10
LGE CDMA Fixed Wireless Telephone LSP-2000A
9) Battery charge level : Indicates charged battery level.
11
LGE CDMA Fixed Wireless Telephone LSP-2000A
2.3 Installation
You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone.
STEP I. Check Components
l Fixed Wireless Terminal is supplied with the following standard unit and accessories;
1. LSP-2000A Main Unit with Handset -1EA-
2. Dipole Antenna -1EA-
3. Backup Battery -1EA-
4. User Guide . -1EA-
5. AC/DC Power Adapter -1EA-
6. Power Cord(Only SMPS Adapter) -1EA-
l Please make sure that these components are present before you begin the unit
installation. And then compare the following figures and components. If components are missing or damage is found, contact the store where you purchased the unit immediately.
STEP II. Place the Terminal
l Place the terminal on the stable flat secure surface area (desk, table, etc.). Serious
damage may result if the unit falls. Do not place the unit on, or within 1 meter of heaters or radiators. This unit is designed for desktop usage. Avoid direct exposure to the sun lights and damp area.
l Read the SAFETY INFORMATION located at the first part of this document before
you place the terminal
STEP III. Connect Components (See the figures in “Installation Steps”.)
l Connect the antenna to the TNC antenna connector located at the top side of the
terminal. If you placed the terminal on the flat surface, bend the antenna up right.
l Connect curl cord of handset assembly to the RJ-11C port located at the left side of
the terminal.
l Open the battery case, securely connect the battery cord, place the backup battery
pack and close the case.
l
Connect the AC/DC Adapter cable to the DC input port located at the topside of the terminal.
-. If it is good, beep tone is heard.
-. If it is not good(Booting is fail or beep tone is not heard), you have to connect the adapter or backup battery, again.
l Please follow the below to get better voice quality;
1. Keep away from electrical appliances such as TV, computer, radio and so on.
2. Keep terminal in a high and central location with no obstructions, such as metal walls.
3. Raise the integral antenna of terminal to get maximum strength of receive signal
as shown figure at the next page.
12
LGE CDMA Fixed Wireless Telephone LSP-2000A
Antenna TNC Connector
Handset Connector
AC Power Supply Connector
STEP IV. Check the LCD Display
l After you follow the installation instruction step I to step III, please check the LCD for
normal operation.
l If you may not see status of service, please repeat the 5
th
instruction of step III. And conform Fixed Wireless Telephone to get the proper signal strength from service operator system.

The adapter type(with power cord) may be different by country adaptation.
13
LGE CDMA Fixed Wireless Telephone
112
3
4
6
LSP-2000A
2.4 Installation Steps
Please follow the below procedure to install the unit properly.
3
55
Connect Base­handset to the handset connector.
Bend the antenna up right.
Insert back-up battery in the bottom of the unit. (give care to polarity)
2
4
6
Connect the antenna to the TNC connector (Turn right).
Open the battery cover at the bottom of the unit.
Connect the AC power supply.
14
LGE CDMA Fixed Wireless Telephone
of a call, pressing the hook switch for less than 1 second will be
LSP-2000A
Basic Operation
3.1 Making a Call
1. Pick up the handset or press button.
2. Listen for dial tone
3. Enter the phone number with area code if needed.
4. Wait for the Auto Time-out.
Calling...
1234567
1234567
5. The call is connected and you can start conversation.
6. To disconnect the call, replace the handset or press button.
3.2 Redialing Last Outgoing Number
1. Pick up the handset or press button.
2. Listen for dial tone.
3. Press
l Correcting dialing mistakes
l If the phone is locked, enter the Lock Code l If the call did not go through, press the hook switch and dial again. l Flashing / Hook Switch
l Battery icon is displayed only when the terminal is operating by battery without AC power.
Redial
1. Press Clear button shortly to erase the most recent digit.
2. Press and hold Clear button for at least one second.
1. While in the middle treated as a flash. After 1 second, the call will be terminated.
2. Very briefly pressing the hook switch will be ignored.
button. The last number that you called will be re-dialed.
15
LGE CDMA Fixed Wireless Telephone LSP-2000A
3.3 Receiving a Call
1. When bell rings, pick up the handset.
Incoming Call!
2. Start conversation.
3. To disconnect the call, replace the handset.
3.4 Signal Strength
The quality of calls depends on the signal strength in your area. The stronger the signal, the better the call quality. The signal strength icon indicates the current strength as a number of bars. You can see the antenna and bars according to the strength of received signal in the upper-left part.
3.5 Missed Call Message
If a call is received and not answered for user’s absence, You are informed that you have missed a call. The latest missed call time and number of missed call is displayed.
Press
[ok]
to erase “Missed call” message.
Time: 0:23
menu
08 May, Sat
10:23 AM
menu recall
Missed 1 call
10:51 AM
ok
16
LGE CDMA Fixed Wireless Telephone LSP-2000A
List of Menu State
Main Menu Sub-Menu Setting Value Default
1. Select Volume
2. Ring Select - 10 types
3. Wake-up Time - 12 hour (AM/PM)
4. Security
1. Ring Volume 3 steps
2. Key Volume 3 steps +silent
3. Ear Volume 3 steps
1. Lock Mode Set Off/Always/Power On
2. Clear Calls
3. Clear Memory
4. Emergency Call
5. Lock Code
10 ea. 99ea
Local (3 ea.) 4 digit
5.Convenient
6. Additional
1. Hot Line Enable/Disable
2. Hot Line Time
3. Speed Dial
1. Key Tone Length Short/Long
2. Auto Time-out 2-9 Sec.
3. 3 Min. Alert Enable/Disable
4. DS Mode Set PC FAX/Voice/Async
4.1 Select Volume
This menu allows you to adjust the various different volumes.
4.1.1 Ring Volume
The received tone when you receive a call can be adjusted.
l From the MENU
1. Press in on-hook state.
[menu]
+ 1(Select Volume)+ 1(Ring Volume)
2-9 Sec. Enable/Disable
MAIN MENU
1:Select Volume 2:Select Ring
2. Press
3. Press
l By the
1. Press
Volume [ok]
Volume
Volume
hook state
button or
button
button to adjust ring volume in on-
[next]
to adjust ring volume.
17
Ring Level
ok next
Ring Level
LGE CDMA Fixed Wireless Telephone LSP-2000A
4.1.2 Key Volume
The tone when you press a key can be adjusted.
1. Press
2. Press Volume button or [next] to adjust key volume.
3. Press
4.1.3 Ear Volume
The voice of the other party can be adjusted in on-hook state.
1. Press
[menu]
on-hook state.
[ok]
[menu]
on-hook state.
+ 1(Select Volume) + 2(Key Volume) in
+ 1(Select Volume) + 3(Ear Volume) in
Key Level
Ear Level
nextok
nextok
2. Press Volume button or [next] to adjust ear piece volume
3. Press [ok]
ü Press
Volume
button to adjust volume during conversation
4.2 Ring Type Selection
You can select the various ring types
1. Press
2. Select a desired ring type with
ü There are 10 different ring types. ü Those are General, Chime, Cord, Escalate, Jewel, Pathetique, Bolero,
3. Press
[menu]
[next]
.
Edelweiss, Csikos Post, Sweet Home.
[ok]
+ 2(Select Ring) in on-hook state.
Volume
to save and exit.
button or
Select Ring
General
next ok
18
LGE CDMA Fixed Wireless Telephone LSP-2000A
4.3 Wake-up Time
This function allows you to adjust Wake-up Time.
1. Press
2. Select
3. Press
[menu]
Always, Once or Off
[edit]
+ 3(Wake-up Time)
and set the time.
by
[next]
and press
[ok]
MAIN MENU
3:Wake-up Time 4:Security
.
Alarm Time
Always
nextok
4. Select A.M. or P.M. by
[AM/PM]
.
Wake-up Time
_1:23 AM
5. If you want to modify the wrong time, press and set again.
6. Press
[ok]
to save and exit
Clear
button
4.4 Security
4.4.1 Lock Mode Set
This function prevents your phone from being used without permission. Typical default value is 0000. Possible settings are Off, Power On and Always. The Off means that the phone is not locked. turned on.
1. Press
Always
[menu] + 4
sets the phone locked immediately.
(Security)
Power On
locks the phone when the phone is
Enter
2. Enter your own 4 digit lock code
3. Press 1(Lock Mode Set)
4. Select
Volume button.
5. Press
Off, Power On
[ok]
to save and exit.
or
Always
by
19
[next]
or
Lock Code!
SECURITY
1:Lock Mode Set
2:Clear Calls
Auto Lock
okAM/PM
Off
nextok
LGE CDMA Fixed Wireless Telephone LSP-2000A
4.4.2 Clear Calls
When a previous outgoing or incoming call history is stored in a memory location, you can erase the all call history.
1. Do the above 1 and 2 steps of 4.4.1.
2. Press 2(Clear Calls)
3. Press
4.4.3 Clear Memory
When you want to delete phonebook memory, you can erase all phonebook memory.
1. Do the above step1 and 2 of 4.4.1.
2. Press 3(Clear Memory).
3. Press
4.4.4 Emergency Call
Even if your phone is locked you can make calls to 3 emergency numbers.
1. Do the above step1 and 2 of 4.4.1.
2. Press 4(Emergency Call)
[yes]
to erase all call history
[yes]
to erase all phone memory.
Clear Calls?
Clear Memory?
Emergency 1
3. Press
4. Press [edit].
5. Enter the emergency phone number
[next]
from 1 to 3
or
Volume
button to choose the number
edit
noyes
noyes
Empty!
next
6. Press
7. Press
4.4.5 Changing Lock Code
You can change a new lock code(4digits).
1. Do the above step1 and 2 of 4.4.1.
2. Press 5.(Lock Code)
[ok]
to save the number
[next]
to edit others or Press
119
ok
End
button to exit emergency call process
New Code
ok
20
quit
quit
LGE CDMA Fixed Wireless Telephone LSP-2000A
3. Enter new lock code and press
[ok]
to save.
4. Enter new lock code again to confirm and press
[ok]
to save.
4.5 Convenient Features
While the Hot line function is enabled, the programmed number will be automatically dialed when you pick up the handset and wait for the programmed hot line time (2~9 sec) without any key press.
4.5.1 Hot Line
[ok]
to select.
[menu] + 5
[edit]
(Convenient)
off
to input Hot Line phone number.
by
[next]
Volume
or
CONVENIENT
1:Hot Line 2:Hot Line Time
button and press
Hot Line
1. Press
2. Press 1(Hot Line)
3. Select on or
4. Press
5. Enter the Hot Line phone number
On
nextok
6. Press
4.5.2 Hot Line Time
1. Press
2. Press 2(Hot Line Time).
3. Select hot line connection time(2~9 sec.) by
4. Press
4.5.3 Speed Dial (enable / disable)
1. Press
2. Press 3(Speed Dial)
3. Select
[ok]
to save and exit.
[menu] + 5
Volume
[ok]
button.
[ok]
to select.
[menu] + 5
Yes
or No by
to save and exit.
(Convenient)
(Convenient)
[next]
or
Volume
[next]
or
button and press
119
ok
Hot Line Time
Speed Dial
quit
5 sec
nextok
Yes
nextok
21
LGE CDMA Fixed Wireless Telephone LSP-2000A
This function can be used when the Speed Dial is set to Yes.
l Speed Dial Function
1. You can store phone numbers in memory locations (1~99) and place a call.
2. Press the memory number (1 through 99) corresponding to the appropriate memory
location, and hold for a few seconds.
4.6 Additional feature
4.6.1 Key-tone Length
Setting key beep playback length. Possible settings are
Short
1. Press
2. Press 1(KeyTone Length).
[menu] + 6
(Additional).
ADDITIONAL 1:KeyTone Length 2:Auto Time-out
3. Select press
Short
[ok]
Long
or
to select.
by
[next]
or
Volume
button and
KeyTone Length
4.6.2 Auto Time-out
Setting the length of time the phone waits before automatically dialing a number. You can select this time between 2 and 9 second.
1. Press
[menu]
+ 6(Additional).
and
Long
.
Short
nextok
2. Press 2(Auto Time-out).
3. Select Auto time-out second between 2 and 9 by
[next]
4. Press
Volume
or
[ok]
to select.
button.
4.6.3 3 Minute Alert
Alerts you every 3 minutes during a call.
1. Press
[menu]
+ 6(Additional)
2. Press 3(3 Min Alert)
3. Select On or Off by [next] or Volume button.
4. Press
[ok]
to save and exit
22
Auto Time-out
5 sec
nextok
3 Minute Alert
On
nextok
LGE CDMA Fixed Wireless Telephone LSP-2000A
4.6.4 DS Mode Set
In Data Service mode, You can select the terminal receive type among PC FAX,
Voice and Async.
5. Press
[menu]
+ 6(Additional)
6. Press 4(DS Mode Set)
7. Select the desired type by
8. Press
4.6.5 24 / 12 hours
You can select time display type(24/12 hours)
1. Press
2. Press 5(24/12 hours)
3. Select
4. Select
[ok]
to save and exit
[menu]
[24hours] [12hours]
+ 6(Additional)
to display 24hours(00~24) to display (AM / PM)
[next]
or
Volume
Functions while in a call
5.1 Ear Volume
You may adjust ear volume while you are in a call.
Volume
The used to adjust ear volume.
5.2 MIC Volume
button on the right side of the phone can be
button.
DS Mode Set
24 / 12 hours
ok
Time: 0:23
menu
Ear Level
Voice
nextok
24 hours
next
1234567
Adjusting MIC volume while in a call.
1. Press
2. Select
[menu]
Low or High by [next]
and 2(MIC Level) while in a call.
or
Volume
IN-CALL MENU
1:Memo 2:MIC Level
button.
MIC Level
23
High
LGE CDMA Fixed Wireless Telephone LSP-2000A
3. Press
[ok]
to save and exit.
5.3 Mute
This function prevents your voice from being transmitted but you can still hear other side.
1. Press
End
button while in a call.
2. You could see “Mute” message blinking on the right
side of the LCD.
3. To release Mute, Press
End
button again.
5.4 Memo
You can save numbers while in a call.
1. Press
2. Enter a number using key pad.
3. Press [add] to save and exit. Or press [quit] to exit.
[menu]
and 1(Memo) while in a call.
5.5 Transmitting your own number
Time: 0:23 Mute
1234567
menu
IN-CALL MENU
1:Memo 2:MIC Level
114
add
quit
Number Stored
in Call List
This function is a convenient feature which enables you to transmit your own phone number while in a call through press one key. (For example, Sending your phone number when you pages.)
ü Press
[menu]
and 3(Send Owner #)
IN-CALL MENU
3:Send Owner #
24
LGE CDMA Fixed Wireless Telephone LSP-2000A
Searching, Editing & Dialing
6.1 Retrieving Last Call History
1. Press
-
2. Select a number or a name in the last call list by
3. To see more information press
[recall]
[next]
and press
to save a number in the memory. ü Pick up the handset or Press button to make
a call with the displayed number.
l By pressing ü Press
l To save a number ü Press
and 1(Last Calls)
[view]
.
[time]
[ok]
to exit
[save]
in step3
[time]
and press
[save]
RECALL MENU
1:Last Calls 2:Memories
1234567 028507618
Call to
save time
Call Made:
05/12 4:34 PM
ok
viewnext
028507618
ü Enter the name in text mode and press
save. Press case character.
[A / a]
to change upper or lower
[ok]
to
028507618
ok A/a
[ok]
25
[ok]
.
.
ABC auto=01 ??
ok
next
Make it Secret? No
ok
next
- To store without name, just press
- Refer to “To enter a character”.
ü Enter a desired memory location (01~99: 2
digits) or press memory location and press [ok].
- The phone number is stored in the displayed memory location.
ü The phone will display a message asking to
keep your number as secret or not. Select “No” or “Yes” using
[next]
[next]
to choose a desired
. Then press
LGE CDMA Fixed Wireless Telephone LSP-2000A
- You can see a confirming message.
- Also you can see a condition of used memory.
ABC
was stored
in #01
Memory... Used : 01
Unused : 99
6.2 Retrieving Phone Number by Address
1. Press
2. Enter a memory address to retrieve phone number.
3. Pick up the handset or press button to call to
[recall]
(ex: If you enter a memory address, 01.) ü If there is no stored phone number in the memory
location, “Empty address” is displayed.
displayed number, press information or press information.
l Edit process
ü Modify the phone number by
keypad. And Press
1) Delete the phone number by
2) Enter the modified phone number.
3) Press
4) To move cursor, use Volume button or *, #.
5) Enter the name.
6) Press
and 2(Memories)
[edit]
[erase]
[ok]
to edit a related name.
[ok]
.
[ok]
.
to edit stored
to delete displayed
Clear
button and
Clear
button.
Recall Address? ??
quitname
01:ADG 028503619
eraseedit
ADG 028503619
ok
DG 028503333
ok A/a
ü
Enter a new memory address to store a new information or choose the new memory address
[next]
by
ü Press [ok] to no secret.
and press
[ok]
.
26
CBH org=01 ??
ok
next
LGE CDMA Fixed Wireless Telephone LSP-2000A
l Erasing process ü You might press
ü
Press
[ok]
[erase]
to complete erasing process.
at the above step 3.
Erase #01? 028503619
ok
- erased! -
6.3 Retrieving Phone Number by Name
1. Press
2. Press
3. Enter the name that you want to look for and press
[find]
ü At least two letters are recommended for quick
ü Press
4. Press ü Pick up handset to make a call.
[recall] [name]
.
search.
the list of matches.
[view]
and 2(Memories)
to retrieve phone number by name.
[next]
to see information in that location.
or
Volume
Recall Address? ??
Search for
button to scroll through
01:ADG 02:ABC
next view
01:ADG 028503619
quit
quitname
find
eraseedit
SMS (Short Message Service)
Messaging, Paging, and Voice mail features are available when your phone is turned on. Using screen or to send a message. While viewing a message, you can call back to the
Message
button allows you to access messages for viewing on the LCD
27
LGE CDMA Fixed Wireless Telephone LSP-2000A
number displayed in the message by picking up handset. Check with your WLL service provider regarding the availability of this feature. The
information in a message depends on the mode the WLL is operating in and the service’s capabilities.
7.1 Checking & Deleting Received Message
7.1.1 Text Message
SMS MENU
1:Received MSG
2:Set Alert
RECEIVED MSG
1:Message 2:Voice Mail
!01.Hello!
02.Good Morning
5/21 2:20 PM
< Message >
erase
Message
button and 1(Received MSG)
1. Press
2. Press 1(Message) to see a received text message list.
.
ü Locate to the desired message in the list. ü Mark “!” means a new message. ü Mark “∨ “means already a checked message.
3. Press [view] to see the content of desired message. ü You can see the message with received time and
viewnext
ok
4
caller’s phone number.
ü Use the
4. Press
Volume
[erase]
button to read all message.
to erase a message.
28
< Mesage >
Hello!
erase
< Called By >
1234567
erase
Erase Message?
yes no
ok
ok
LGE CDMA Fixed Wireless Telephone LSP-2000A
ü Press
7.1.2 Voice Message
Voice mail notifications indicate the number of new voice mail message in your mail box. Only the most recent voice mail notification will be stored in the WLL phone; previous messages will be overwritten. When a voice mail messages left for you, the WLL phone will alert and display “ -Voice Mail -“. You must call your voice mail service to retrieve these messages.
1. Press state.
[yes]
Message
to complete erasing process.
button and 1(Received MSG) in idle
-Voice Mail­ 5/21 2:32 PM
1 New Msg
5/21 2:32 PM
2. Press 2(Voice Mail) to check the voice message. ü If there is no voice message, “No New Voice Mail”
is displayed.
ü Press
3. Pick up the phone to make a call to call back your voice mail box if the number of the voice mail box is provided by system.
[erase]
to delete the voice message.
< Voice Mail >
erase ok
7.1.3 Erasing all Received Message
1. Press
2. Press 3(Clear All).
3. Press
Message
[yes]
to delete.
button and 1(Received MSG).
7.2 Setting alert tone count.
1. Press
2. Select
[next]
3. Press
Message
no, 2 beeps, 4 beeps or Factory
.
[ok]
button and 2(Set Alert).
to save and exit.
by pressing
7.3 Message Sending
n 7.3.1 Sending a New Message
1. Press Message Button and 3(MSG Sending)
29
RECEIVED MSG
3:Clear All
Erase All?
yes no
Message Alert
< Called By >
1234567
2 beeps
ok
erase
ok
next
SMS MENU
1:Received MSG
2:Set Alert
LGE CDMA Fixed Wireless Telephone LSP-2000A
2. Press 1(New MSG) to send a new message
3. Enter the called number and press [OK]
SMS MENU
3:MSG Sending
MSG Sending
1:New MSG
2:Sent MSG
Called Number
ok
1234
4. Enter the call back number and press [OK]
5. Input a message and press Press [A / a] to change upper or lower case character
6. Select Yes/No to store the message. Press [OK] to send
[ok]
to send
n 7.3.2 Sending the sent Message or message
after editing the Sent Message
1. Press Message Button and 3(MSG Sending)
.
2. Press 2(Sent MSG) to see a received text message list.
Call back Number
5678
ok
<MSG INPUT>
028503333
abcde
ok A/a
ok A/a
Message Store?
Yes
nextok
MSG Sending
1:New MSG 2:Sent MSG
30
02.Good Morning
01.Hello!
LGE CDMA Fixed Wireless Telephone LSP-2000A
ü Locate to the desired message in the list. .
ü
If You want to select the next message, Press the next button
3. Press
5. Press [OK] Button.
6. Enter the called Number and press [OK]
7. Enter the call back Number and press [OK]
8. Select Yes/No to store Message. Press [OK] to send the
MSG
[edit]
to edit the content of the selected message.
ü You can see the selected sent message ü Edit the message. Press
or lower case character
[A / a]
to change upper
<MSG INPUT>
028503333
Hello!
ok A/a
ok A/a
<MSG INPUT>
028503333
Hello Guys!
ok A/a
ok A/a
Called Number
ok
Call back Number
ok
Message Store?
7.3.3 Erasing a Sent Message
1. Press Message Button and 3(MSG Sending)
MSG Sending
1:New MSG
2:Sent MSG
1234
5678
Yes
nextok
MSG Sending
3:Clear MSG
31
LGE CDMA Fixed Wireless Telephone LSP-2000A
2. Press 3(Clear MSG) to clear text message list.
ü Locate to the desired message in the list.
3. Press
ü
4. Press
ü Press
[view]
to see the content of desired message.
You can see the received message.
[erase]
to erase a message.
[yes]
to complete erasing process.
01.Hello!
02.Good Morning
< CONTENTS >
Hello!
erase
Erase Message?
yes no
Beside Functions
8.1 Redial
viewnext
cancel
Pick up the handset or press button and
number.
8.2 Viewing your own number
Press telephone number
Redial
button in on-hook state to see your own
32
Redial
button to redial last outgoing
WLL 012-345-6789
LGE CDMA Fixed Wireless Telephone LSP-2000A
9. Storing Phone Number
9.1 Storing/Editing Phone Numbers
9.1.1 Storing Phone Numbers
Frequently used phone numbers can be stored on the memory locations (01~99: 2 digits) and you can make a call by pressing memory location number in off-hook state.
1. Enter the area code and phone number in on-hook state. (Max. 32 digits)
2. Press
3. Enter the name in text mode and press
Press
4. Enter the desired memory location.
5. The phone will display a message asking to keep
[save].
characters.
ü
To store without name, just press
ü Refer to “To enter a character”.
ü The phone number is stored in the displayed
memory location.
your number as secret or not. Select “No” or “Yes”
[next]
using
ü You can see a confirming message.
ü Also you can see a condition of used memory.
[A /a]
. Then Press
[ok]
to save.
to change upper or lower case
[ok]
.
[ok]
.
021234567
save
find
021234567
ok A/a
ABC
auto=01 ??
ok
next
Make it Secret? No
ok
next
ABC was stored!
in #01
Memory... Used : 01
Unused : 99
33
LGE CDMA Fixed Wireless Telephone LSP-2000A
To enter a character.
l
You can enter English character in editing mode. You can enter English character as default, and press
Message
to select specific
character.
To enter English character.
l
Press once a keypad to enter the first letter labeled in the keypad, twice to enter the second letter and 3 times to enter the third letter.
EX) To enter “L”,
Press dial button 5 labeled “JKL” 3 times to enter “L”.
ü After 2 seconds entering a character, the cursor is moved to the next position
automatically.
ü Press Volume button to move the cursor. ü Press
Clear
button to erase or correct entered character.
l To enter specific character,
Press
Message
to view a desired character while you are entering names.
ü Special characters includes *, #, %, “, :, +, <, >, =, and more ü Press the number next to the character you want insert.
9.1.2 Erasing Stored Phone Numbers
When a phone number is stored in a memory location, you can erase the stored phone number.
1. Press
the desired memory location to erase.
[recall]
and 2(memories) and enter a number of
Recall Address? ??
ü If there is no stored phone number in the memory
location, “Empty Address” is displayed.
Empty Address
ü If you do not remember the memory location to
erase, press
Volume
button or press
search phone number by name.
[name]
to
Search for
quitname
find
34
LGE CDMA Fixed Wireless Telephone LSP-2000A
2. Erasing process
01:ADG 028503619
ü Press
[erase]
to delete.
Erase #01? 028503619
ok
ü Press
[ok]
to complete erasing process.
- erased! -
9.2 Finding Stored Phone Numbers
eraseedit
quit
You can see all the list of stored phone numbers in memory list and if you forgot the memory location, can find it in sequence. And You can place a call with the phone number.
1. Press
[recall]
and 2(memories) in on-hook state.
Recall Address?
2. Press Volume button to find the desired phone
number.
ü
Locate in the desired name or address to find.
ü If not any entered name, phone number is
displayed.
3. Press [view] to see the stored number.
4. To make a call with the phone number in the state of
step 2 or step 3, pick up the handset or press button and wait for Auto Time-out.
??
01:ABC 02:1234567
next view
01:ABC 023456789
quitname
eraseedit
35
LGE CDMA Fixed Wireless Telephone
_----
LSP-2000A
10. Restriction Call Service
This function is a convenient feature which enables user to restrict using any phone number. To forbid using any phone number, user must set the number in deny edit. Can’t use any phone number(max 32digits) started with the number saved in deny edit. If user set the phone number in permit edit, can use any phone number (max 32digits) started with the number even if the phone number is set in deny edit.
Ex) example to restrict using the phone number started with “700” .
1. set “Restriction” in Restrict set menu (function 10.1)
2. set “700” in deny edit. (function 10.3)
3. set “700-1234” in permit edit.(function 10.2)
Result : user can use the phone number started with “700-1234”.
10.1 Restrict set No restriction
This is a general function which has no any restrictions
Restriction
This is a function that you can set permited phone number and denied phone number.
Emergency only
This is a function which enable you to call only emergency numbers.
.
1. Press
2. Enter a lock code using key pad.
3. Press 6(Restrict) and 1(Restrict Set).
4. Select “No Restriction” ,” Restriction” or “Emergency only ” using [next].
[menu]
and 4(Security) .
and press [ok]
MAIN MENU
3:Wake-up Time 4:Security
Enter Lock Code !
RESTRICT
1: Restrict Set 2: Permit Edit
Restrict Set Restriction
36
LGE CDMA Fixed Wireless Telephone
Permit 1
Restrict 1
LSP-2000A
next
ok
♦
Below 10.2 and 10.3 function can be used when the Restrict set is set to
“Restriction”.
10.2 Permit Edit
You can call it if the phone numbers saved in permit edit though they were saved in deny edit. You can save 10 permit phone numbers.
1. Do the above step 1~2 of 10.1
5. Press 6(Restrict) and 2(Permit Edit).
RESTRICT
1: Restrict Set 2: Permit Edit
3.Press [edit] to edit permit phone number.
4.Enter the permit phone number
5.Press [ok] to save and exit
700-1234
next edit
10.3 Deny Edit
You couldn’t call any phone numbers saved in deny edit.
You can save 10 deny phone numbers.
1. Do the above step 1~2 of 10.1
2. Press 6(Restrict) and 3(Deny Edit).
RESTRICT
3: Deny Edit
3.Press [edit] to edit deny number.
4.Enter the deny phone number
5.Press [ok] to save and exit
700
next edit
11. Speaker phone
This function is a convenient feature which enables you to call using speaker phone
button in on-hook state.
37
LGE CDMA Fixed Wireless Telephone LSP-2000A
12. Backlight
pressed any keys, LCD has a light during 7 seconds.
13. General Information
Main Unit
Item LSP-2000A
Tx Frequency Digital : 1850 ~ 1910 MHz Rx Frequency Digital : 1930 ~ 1990 MHz Channel Bandwidth 1.25 MHz Tx Power Digital : Max. 0.2W Rx Sensitivity -104 ~ -25dBm Size 183 X 229 X 88 (L X W X H)
Weight(g)
Operating Temperature
AC/DC Adapter
Below 1200(with battery, Ni-cd) Below 1120(with battery, Ni-MH) Below 920 (without battery)
0 ~ 50
Item SMPS Type Description
Input Voltage AC 100 ~ 250V / 0.3A, 15W Input Frequency 50 / 60Hz Output Voltage 9.6V(DC), 1A
Battery
Item Description
Capacity 6V Ni-cd 1700mAh / 6V Ni-MH 1700mAh Talk duration time 2 Hours Standby duration time 24 Hours Charging duration time Trickle, 24 Hours
38
LGE CDMA Fixed Wireless Telephone LSP-2000A
Licensed by QUALCOMM Incorporated under one or more of the following Patents: U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204
U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No. 5,107,225
39
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use