OWNER’S MANUAL
Mouse Scanner
LSM300
(Windows version)
Please read this manual carefully before operating your set and retain it for future reference.
The S/W included with the product may be updated or changed to improve performance without notice.
Getting Started |
3 |
Safety Information
There are two types of precautions: “Warning” and “Caution”.
>Warning : Failure to observe these instructions may result in serious injury or death.
>Caution : Failure to observe these instructions may result in minor injury or damage to the product.
, Note : Following the tips can prevent malfunction or damage to the product.
7 : This symbol indicates a prohibited use of the product.
-After reading this manual, make sure to keep it in a place where you can easily access while using the product.
-The following safety information is intended to guide you to the safe and correct use of the product and prevent unwanted accident or damage.
> Warning
Do not use or store the product in direct sunlight or near a hot object (e.g., a heater or replace).
y Otherwise, this may result in fire due to excessive heat.
Do not direct the laser beam towards your eyes.
y Otherwise, this may cause damage to your eyesight or a loss of vision.
If the product is emitting smoke, unusual odors or sounds, stop using the product immediately and disconnect it
from the computer.
y Otherwise, this may cause fire or electric shock.
Do not place a container filled with liquid such as vase, flowerpot, cup, cosmetics/ toiletry or chemicals/medicine near the product.
y Otherwise, this may result in personal injury or death due to fire or electric shock.
Do not use the product if liquid such as water, chemicals or oil is spilled on the product.
y Otherwise, this may cause fire or electric shock.
1 GettingStarted
1 GettingStarted
4Getting Started
> Caution
Do not install the product in an extremely hot (over 35 °C) or cold (under 5 °C) area, or with high temperature variation.
y Otherwise, this may cause malfunction or damage to the product.
Do not install the product in a humid or dusty area.
y Otherwise, this may cause malfunction or damage to the product.
Be careful not to spill liquid such as water, chemicals or oil on the product.
y Otherwise, this may cause malfunction or damage to the product.
Do not apply excessive bending or shock to the cable.
y Otherwise, this may cause malfunction or damage to the product.
Always read and follow the user manual when using or removing the product.
y Improper use may cause malfunction or damage to the product.
Do not install the device in an area prone to static electricity or excessive heat.
y Otherwise, this may cause malfunction or damage to the product.
Do not disassemble, modify or repair the product.
y Otherwise, this may cause the product to break down, increase the safety risk, and voids the warranty of the product.
Do not apply excessive shock to the product.
y Otherwise, this may cause malfunction or damage to the product.
Be careful not to drop the product or apply excessive shock to the scan window on the bottom of the product.
y Otherwise, this may cause malfunction or damage to the product.
|
Getting Started 5 |
||
FCC ID : SSNLSM300R, SSNLSM3001306 |
CAUTION: Any changes or modifications not |
|
|
FCC Compliance Statement |
expressly approved by the party responsible for |
||
compliance could void the user’s authority to |
|||
This device complies with part 15 of the FCC |
|||
operate this equipment. |
|||
rules. Operation is subject to the following two |
|||
FCC RF Radiation Exposure Statement : This |
|||
conditions: |
|||
equipment complies with FCC radiation exposure |
|||
(1) This device may not cause harmful interference, |
|||
limits set forth for an uncontrolled environment. |
|||
and |
|||
This equipment should be installed and operated |
|||
(2) This device must accept any interference |
|||
with minimum distance 20 cm between the |
|||
received, including interference that may cause |
|||
radiator and your body. End users must follow the |
|||
undesired operation. |
|||
specific operating instructions for satisfying RF |
|||
NOTE: This equipment has been tested and found |
|||
exposure compliance. This transmitter must not be |
|||
to comply with the limits for a Class B digital device, |
co-located or operating in conjunction with any |
||
pursuant to Part 15 of the FCC Rules. These limits are |
other antenna or transmitter. |
||
designed to provide reasonable protection against |
FCC Radio Frequency Interference |
||
harmful interference in a residential installation. This |
|||
Requirements |
|||
equipment generates, uses, and can radiate radio |
|||
This device is restricted to indoor use due to its |
|||
frequency energy and, if not installed and used |
|||
operation in the 5.15 to 5.25 GHz frequency range. |
|||
in accordance with the instructions, may cause |
|||
FCC requires this product to be used indoors for |
|||
harmful interference to radio communications. |
|||
the frequency range 5.15 to 5.25 GHz to reduce the |
|||
However, there is no guarantee that interference |
|||
potential for harmful interference to co-channel |
|||
will not occur in a particular installation. |
|||
Mobile Satellite systems. High power radars are |
|||
If this equipment does cause harmful interference |
|||
allocated as primary users of the 5.25 to 5.35 GHz |
|||
to radio or television reception, which can be |
|||
and 5.65 to 5.85 GHz bands. These radar stations |
|||
determined by turning the equipment off and |
|||
can cause interference with and/or damage this |
|||
on, the user is encouraged to try to correct the |
|||
device. This device cannot be co-located with any |
|||
interference by one or more of the following |
|||
other transmitter. |
|||
measures: |
|||
CAUTION: Regulations of the FCC and FAA prohibit |
|||
y Reorient or relocate the receiving antenna. |
|||
airborne operation of radio-frequency wireless |
|||
y Increase the separation between the equipment |
|||
devices because their signals could interfere with |
|||
and receiver. |
|||
critical aircraft instruments. |
|||
y Connect the equipment into an outlet on a |
|||
Responsible Party : |
|||
circuit different from that to which the receiver is |
|||
LG Electronics USA, Inc.1000 Sylvan Avenue |
|||
connected. |
|||
Englewood Cliffs, NJ 07632 |
|||
y Consult the dealer or an experienced radio/TV |
|||
TEL. : +1-800-243-0000 |
|||
technician for help. |
|||
WARNING: This product contains chemicals known |
|||
|
|||
|
to the State of California to cause cancer and birth |
||
|
defects or other reproductive harm. Wash hands |
||
|
after handling. |
1 GettingStarted
1 GettingStarted
6Getting Started
CAUTION
yUsing the mouse scanner for a prolonged time can cause serious injuries or disorders, and excessive computer work can cause fatigue to your body, including hands, feet, shoulder and neck. If such pains continue, this can lead to muscles and musculoskeletal disorders such as Carpal Tunnel Syndrome (CTS). If you experience fatigue or discomfort, please consult your local doctor.
The following measures are recommended to reduce the risk of injury.
-Take a rest at regular intervals.
-Stretch your arm and shoulder muscles regularly.
-Place the mouse scanner in a convenient position.
yDisassembling the mouse scanner may cause malfunction of the product. Do not
disassemble the mouse scanner. LG Electronics is not responsible for problems caused by disassembling the product by users or nonauthorized personnel.
Handling the Unit
yWhile on the move, always put the mouse scanner in the pouch to protect the scan window from scratch and shock.
yThe scan window may be broken if mouse scanner is dropped especially on a hard surface. It can cause harm to a persons body.
yTouch the scan window with sharp objects or using the scanner on a rough surface may cause damage to the scan window. If the scan window is scratched, the quality of the scanned image may deteriorate.
yWhen removing fingerprints or dusts off the scan window, always use the soft composite fiber cloth.
Table of Contents |
7 |
Table of Contents
1Getting Started
3 Safety Information
8Main Features
8– About the mouse scanner
8In the Box
9Product Overview
2Mouse Operation
10Using an Wireless Mouse
10– Battery installation
11– Connecting the mouse scanner
12Using an Wired Mouse
12 – Connecting the mouse scanner
3Scanner Operation
13Installing the LG Smart Scan Software
13– About LG Smart Scan Software
13– System requirements
14– How to install
14– How to quit
15Using the LG Smart Scan Software
15– Main menu display
16Scanning
20 Editing
20– Edit menu display
20– Control panel
20– Editing the scanned image
21Pasting
22Exporting
22– Drag & Drop feature
22– Double Click feature
23Sharing
23– Using [Share] menu
24– Using [Apps] menu
25– Managing [Share] and [Apps] menu
26Settings
26– General
26– Save
26– Updates
27– Text Recognition
27– Proxy Settings
27– Advanced
4Troubleshooting
28Troubleshooting
29Customer Support
5Appendix
30 Specifications
1
2
3
4
5
1 GettingStarted
8Getting Started
Main Features
About the mouse scanner
This product combines the features of a scanner and a mouse to enhance the mobility and convenience. It can be used either as a scanner or a mouse.
Real-time sharing
You can share the scanned image with others through the various SNS (Facebook, Twitter, Flickr) and e-mail.
OCR editing
Supports OCR, scanning content into editable office documents efficiently and easily without typing.
High Resolution
Up to 400 dpi scanning resolution for optimal scanning quality.
Excellent Mouse
1200 dpi mouse works on Windows XP, Vista, Windows 7 or Windows 8.
Free size scan
Scan different size, and select the different parts to be scanned, maximum scanning size is up to A3 paper size.
Easy to use
Drag & Drop and Double Click feature make scanning so simple and convenient that anyone can use it easily.
In the Box
- |
- |
|
|
+ |
+ |
|
|
|
Mouse Scanner (1) |
batteries (2) |
|
|
|
|
Micro USB Cable (1) |
Mini Business Card |
||
|
|
|
Holder (1) |
DVD including User
Manual & LG Smart
Scan Software (1)
, Note
y The components may look different from the images shown here. Some components are subjuct to change to improve the performance of the product.
y After purchasing the product, make sure that all of the above components are included in the package. If any components are missing or damaged, contact the
retail store you purchased the product immediately.
y If your computer is unable to read the CD, you can download the file at www.lg.com or www.lgservice.com.
Getting Started |
9 |
Product Overview
1 GettingStarted
aMicro USB port
bLeft button
cWheel
dRight button
eLED indicator
Scanning : Red LED blinks. Low battery : LED turns on Red.
fScan start/stop button
gScan window
Before using it, remove the film attached to the scan window.
hOn /Off switch
iNano receiver
Before using it, make sure that there is nano receiver on nano receiver’s holder.
jBattery cover
, Note
yTouching the scan window with sharp objects or using the mouse scanner on a rough surface may cause damage to the scan window. If the scan window is scratched, the quality of the scanned image may deteriorate.
yWhen removing fingerprints or dusts off the scan window, always use the soft composite fiber cloth.
yDo not direct the LED indicator your eyes. Otherwise, this may cause damage to your eyesight or a loss of vision.
2
Operation Mouse
10 Mouse Operation
Using an Wireless
Mouse
Battery installation
Insert the batteries to use the mouse scanner as an wireless mouse.
1.Remove the battery cover on the bottom of the mouse scanner.
2.Insert two R03 (size AAA) batteries with 4 and 5 matched correctly.
3.Close the mouse scanner with the battery cover.
Notes on battery
yThe provided battery will start slow discharge from the date of ex-factory. Besides, the service life of the battery is also affected by the use time and environment.
yThe service life of the battery may also be shortened if it is stored at the place with extremely low temperature.
yFor long time no use of the product, pleaes remove the battery for proper storage; otherwise, product fault may be caused by battery leakage.
yTo extend the service life of the battery, please turn off the power on the bottom of the mouse scanner for product movement or for long time no use of the product.
yNew and high quality battery is recommended. Besides, try to use two batteries taken from the same package as far as possible.
yThe mixed use of batteries with different trademarks, types or validity periods may shorten the service life of batteries.
yThe use of old or cheap battery or storage battery may also shorten the service life. (Battery with more than 3 years of service life is recommended.)
yThe battery service life may also vary from the mouse pad surface. Avoid using dim or rough pad surface.
yThe battery service life may vary largely from the number of hours using the mouse at home or in the company.
yFor direct and frequent mouse use, the battery service life may be shortened. (e.g. on-line search or playing games.)
> Caution
Keep batteries out of the reach of children.