LG LSHD3680ST Specs
HOME APPLIANCES
LG STUDIO
LSHD3089BD / LSHD3689BD
LSHD3080ST/ LSHD3680ST
30"/36" Wall Mount Range Hood
Fingerprint & Smudge Resistant
Available in 30” & 36” Widths
5" Low-Prole Body
22 1/16" Depth
KE Y FEAT UR ESPRODUCT FEATURES
Accomodates Ceilings up to 9'6"
5-Speed IR Touch Controls
Dual Level LED Lighting
Decorative Mesh Filters (2)
wi- Capabilities
RoHS Compliant
FE ATU RES
Controls IR Touch
Auto Delay-Off Yes
Lighting 9W LED Light Strip
Dual-Level Lighting Yes
Filters
wi-fi Capabilities Yes (On/Off, Control CFM, Lights, St atus)
RoHS Compliant Yes
BLOWER
Speed Levels 5
CFM (min-max) 200-600
Sones (min-max) 1-6
DUCTING
Vertical Internal Blower 6” Rou nd
MATERIALS/FINISHES
Available Colors Black Stainless Steel (BD)
Fingerprint & Smudge Resis tant Yes
POWER/RATINGS
UL Listed Yes
Ratings/Requirements/Type 120V, 4 Amps ,60Hz
Circuit Breaker Size 15 A mp s
Decorative Mesh (2)
Dishwasher-Safe
MOUNTING HEIGHT
Distance Over Co oking Surface 26”- 34”
30" DIMENSIONS/WEIGHT
Product Dimensions (WxHxD) 29 15/16" x 27" to 48 1/2" x 22 1/16"
Carton Dimensions (WxHxD) 34 1/4" x 27 3/8" x 26 5/8"
Weight (Product/Shipping) 35 / 52 lbs
36" DIMENSIONS/WEIGHT
Product Dimensions (WxHxD) 35 7/16" x 27" to 48 1/2" x 22 1/16"
Carton Dimensions (WxHxD) 39 1/2" x 27 3/8" x 26 5/8"
Weight (Product/Shipping) 37 / 55 lbs
LIMITED WARRANTY
Limited Warranty
UPC CODES
LSHD3089BD (30" Black Stainless Steel) 04 82313 389 81
LSHD3689BD (36" Black Stainless Steel) 04 82313 389 98
LSHD3080S T (30" Stainless Steel) 04 82313 398 41
LSHD3680S T (36" Stainless Steel) 04 82313 398 58
2 years parts and labor
© 2018 LG Electron ics USA, Inc . All rights r eserved . "LG Life’s Good" is a r egistered t rademark o f LG Corp. All oth er product an d brand name s are tradema rks or regis tered trade marks of the ir respect ive owners . Design, fea tures and spe cificatio ns are subjec t to
change w ithout not ice. Non-met ric weights a nd measurem ents are app roximate. So me features m ay require Int ernet access . Content and s ervices ma y vary by prod uct and are su bject to chan ge without n otice. 7/17/18
HOME APPLIANCES
10
5/8″
min. ducted - 27″
10
3/8
″
1
3/16
″
29 15/16″, 35 7/16″
10
5/8″
22
1/16
″
5
5/16
″
4"
1"
1"
6
"
STANDARD
min. ducted - 27″
min. recirc. - 31″
max. - 48″
18 7/16″
Minimum Cabinet Width
Standard
Duct Cover
Hood
Heights
minimum ducted (A)27"
minimum recirculating (B)31"
maximum (C) 48-1/2"
Ceiling
Heights
minimum ducted (D)89" (7' 5")
minimum recirculating (E)93" (7' 9")
maximum (F) 118" (9' 10")
Minimum Cabinet Width
)2
)4
)1
side wall cap
w/ gravity damper
(blower
housing)
side wall cap
w/ gravity damper
(blower
housing)
LG DISHWASHERS
LG STUDIO
LSHD3089BD / LSHD3689BD
LSHD3080ST/ LSHD3680ST
30"/36" Wall Mount Range Hood
QUICK INSTALL & CLEARANCES
For full installation directions/clearances please refer to
the corresponding User Manual and Installation Guide.
IMPORTANT
30” DIMENSIONS
A Width 29 15/16 "
B Height 4 8 1/2”
C Depth 22 1/16”
36” DIMENSIONS
A Width 35 7/16”
B Height 4 8 1/2”
C Depth 22 1/16”
POWER RATINGS
AC Power 120V, 4 Amps ,60Hz
DIMENSIONS
• Tolerances: +1/16",
-0 (1.6 mm, -0),
unless otherwise stated.
15/16
29
B
3/8
10
″, 35
A
″
7/16
″
6
"
18 7/16″
″
3/16
1
C
STANDARD
min. recirc. - 31″
″
max. - 48″
5/16
5
22
1/16″
4"
1"
! WARNING
▲
• Observe all governing codes and ordinances during planning and installation.
Contact your local building department for further information.
• Use only duct work deemed acceptable by state, municipal and local codes.
minimum ducted (D)
minimum recirculating (E)
maximum (F)
NOTE
minimum ducted (A)
minimum recirculating (B)
maximum (C)
26″ min.
34
″
36
max.
″
! WARNING
▲
• To reduce the risk of
personal injury caused
Minimum Cabinet Width:
by reaching over a hot
appliance, cabinet storage
space located directly above
the range should be avoided
minimum ducted (A
Hood
minimum recirculating (B)31"
Heights
maximum (C
minimum ducted (D)89" (7' 5")
Ceiling
minimum recirculating (E)93" (7' 9")
Heights
maximum (F
Standard
Duct Cover
7"
8-1/2"
18" (9' 10")
• The exhaust duct(s) and electrical wiring
can be connected from either the top or the back of the hood.
DUCTING OPTIONSCABINET LAYOUT
• A minimum of 6” round duct must be
used to maintain maximum air ow
efciency.
• Always use rigid metal ducts only.
Flexible ducts could restrict air ow by
up to 50%.
• ALWAYS, when possible, reduce the
number of transitions and turns. If long
duct run is required, increase duct size
from 6” to 7” or 8”.
• If turns or transitions are required, install
as far away from hood duct output and
as far apart as possible.
• Minimum mount height between range
top to hood bottom should be no less
than 26”.
• Maximum mount height should be no higher than 34”.
• It is important to install the hood at the proper mounting height. Mounting the
hood too low could result in heat damage and re hazard. Mounting the hood too
high will make it hard to reach and reduce its performance and efciency.
• If available, also refer to the range manufacturer’s height clearance requirements
and recommended hood mounting height above range.
! WARNING Fire Hazard
▲
• NEVER exhaust air or terminate duct work into spaces between walls, crawl
spaces, ceiling, attics or garages.
• All exhaust must be ducted to the outside.
• Use metal ductwork only.
• Fasten all connections with sheet metal screws and tape all joints with certied
(blower
housing)
(blower
housing)
ductless
recirculating
1"
Roof Pitch w/
Flashing & Cap
side wall cap
w/ gravity damper
(blower
housing)
side wall cap
w/ gravity damper
(blower
housing)
Silver Tape or Duct Tape.
© 2018 LG Electron ics USA, Inc . All rights r eserved . "LG Life’s Good" is a r egistered t rademark o f LG Corp. All oth er product an d brand name s are tradema rks or regis tered trade marks of the ir respect ive owners . Design, fea tures and spe cificatio ns are subjec t to
change w ithout not ice. Non-met ric weights a nd measurem ents are app roximate. So me features m ay require Int ernet access . Content and s ervices ma y vary by prod uct and are su bject to chan ge without n otice. 7/17/18
Loading...