LG LS-H096QLA1 Owner's Manual
Room Air Conditioner
(Split Type)
OWNER'S MANUAL
SPLIT TYPE ROOM AIR CONDITIONER
•Please read carefully and thoroughly this manual before operating this unit.
•Contact the authorized SVC man for repair or maintenance of this unit.
•Contact the installer for installation of this unit.
•The appliance is not intended for use by young children or infirm persons without supervision.
•Young children should be supervised to ensure that they do not play with the appliance.
<![endif]>ESPAÑOL ENGLISH
Aire Acondicionado
(Tipo Split)
MANUAL DEL USUARIO
Antes de usar su aire acondionado, lea este manual cuidadosamente y manténgalo para futura referencia.
Safety Precautions Room Air Conditioner Owner’s Manual
TABLE OF CONTENTS
Safety Precautions................. |
3 |
Prior to Operation .................. |
6 |
Operating Instructions........... |
7 |
Remote Controller .............. |
7 |
Remote Control Operation.8 |
|
Additional features............... |
17 |
Maintenance and Service .... |
20 |
Indoor unit......................... |
20 |
Outdoor unit...................... |
21 |
Operation Tips .................. |
22 |
Troubleshooting .............. |
23 |
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
■Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.
You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for service at all.
PRECAUTION
•Contact the authorized service technician for repair or maintenance of this unit.
•Contact the installer for installation of this unit.
•The air conditioner is not intended for use by young children or invalids without supervision.
•Young children should be supervised to ensure that they do not play with the air conditioner.
•When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.
•Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only.
2 Room Air Conditioner
Safety Precautions
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed.
■Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.
WARNING This symbol indicates the possibility of death or serious injury.
CAUTION |
This symbol indicates the possibility of injury or damage to properties only. |
|
■ Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
<![endif]>ENGLISH
WARNING
■ Installation
Plug in the power plug properly.
•Otherwise, it will cause electric shock or fire due to heat generation or electric shock.
Do not modify power cord length or share the outlet with other appliances.
• It will cause electric shock or fire due to heat
Always install air leakage breaker and a dedicated switching board.
Do not damage or use an unspecified power cord.
•It will cause electric shock or fire.
•In the supply cord is damaged, it mut be replaced by the manufacturer or its service agent or a similarly quallfied person in order to avoid a hazard. (Y
Attachment)
Always perform grounding work.
• No grounding may cause electric shock.
Do not use the socket if it is loose or damaged.
• No installation may cause fire and electric shock |
• It may cause fire and electric shock. |
Keep firearms away.
• It may cause fire.
Owner’s Manual 3
Safety Precautions
■ Operation
Do not operate or stop the unit by inserting or pulling out the power plug.
Do not allow water to run into electric parts.
• It will cause electric shock or fire due to heat
Unplug the unit if strange sounds, smell, or smoke comes from it.
• It may cause fire and electric shock accident.
Do not use the power cord close to the heating tools.
• It may cause fire and electric shock.
Ventilate before operating air conditioner when gas goes out.
• It may cause explosion, fire and, burn.
•It may cause failure of machine or electric shock.
Do not direct airflow at room occupants only.
•This could damage your health.
Do not open the entrance during operation.
• It may cause electric shock.
Do not use the power cord near flammable gas or combustibles, such as gasoline, benzene, thinner, etc.
• It may cause an explosion or fire.
Do not disassemble or modify products randomly.
• It may cause failure and electric shock.
CAUTION
|
|
|
|
|
|
Ensure that an installation console |
unpacking and installing. |
|
outdoor appliance is not damaged |
cause injury. |
|
use for a long time. |
|
|
•If leaving appliance damaged, there damage due to the falling of product
4 Room Air Conditioner
Safety Precautions
■ Operation
Never touch the metal parts of the unit when removing the filter.
• They are sharp and may cause injury.
Ventilate well when used together with a stove, etc.
• An oxygen shortage may occur.
Do not put a pet or house plant where it will be exposed to direct air flow.
• This could injure the pet or plant.
Do not clean the air conditioner with water.
•Water may enter the unit and degrade the insulation. It may cause an electric shock.
When cleaning the unit, first make sure the power and breaker are turned off.
•Since the fan rotates at high speed during operation, it may cause injury.
Do not use appliance for special purpose such as animals or vegetables, precision machine, or conservation of art articles.
•It may cause damage of animals or vegetables or loss of property.
Stop operation and close the window in storm |
Hold the plug by the head of the power plug |
or hurricane. |
when taking it out. |
• Operation with windows opened may cause wetting of |
• It may cause electric shock and damage. |
Turn off the main power switch when not using it for a long time.
• It may cause failure of product or fire.
Always insert the filters securely. Clean it once every two weeks.
• Operation without filters may cause failure.
Do not place obstacles around the absorption inlet or instead of blowing-out inlet.
• It may cause failure of appliance or accident.
Do not use strong detergent such as wax or thinner but use a soft cloth.
•Appearance may be deteriorated due to change of product color or scratching of its surface.
Do not place heavy object on the power cord and take care so that the cord should not be pressed.
• There is danger of fire or electric shock.
If water enters the product, turn the power switch of the main body of appliance off. After taking the power-plug out from the socket, contact with the service center.
Do not drink water drained from air conditioner.
• It contains contaminants and will make you sick.
<![endif]>ENGLISH
Owner’s Manual 5
Prior to operation
Prior to operation
Preparing
for
operation
1.Contact an installation specialist for installation.
2.Plug in the power plug properly.
3.Use a dedicated circuit.
4.Do not use an extension cord.
5.Do not start/stop operation by plugging/unplugging the power cord.
6.If the cord/plug is damaged, replace it with only an authorized replacement part.
Usage
1.Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2.Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices.
3.Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.
Cleaning
and
maintenance
1.Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.
2.Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.
3.When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
Symbols
Used
in
this
Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that could cause harm to the air conditioner.
NOTICE |
This symbol indicates special notes. |
6 Room Air Conditioner
Operating Instructions
Operating Instructions
Remote
Controller
Remove the battery cover by pulling it according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of battery are installed correctly.
Reattach the cover by sliding it back into position.
NOTICE : Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
Storage and Tips For Using the Remote Control
• The remote control may be stored by mounting it on a |
• To operate the room air conditioner, aim the remote |
||||
wall. |
control at the signal receptor. |
||||
|
|
|
|
|
|
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
Sleep Mode
Timer
Defrost Mode
OUT OUTDOOR UNIT DOOR OPERATION
Power Display (Inverter only)
:Lights up during the system operation.
:Lights up during Sleep Mode Auto operation.
:Lights up during Timer operation.
:Lights up during Defrost Mode or Hot Start operation (Heat pump model only)
:Lights up during outdoor unit operation. (Cooling model only)
:Indicates the setting temperature and the operating frequency of compressor.(5 steps)
Signal receptor
Operation indication lamps
Plasma |
: The function illustrates its dynamic mode by using a multiple lighting system. |
<![endif]>ENGLISH
Owner’s Manual 7
Operating Instructions
Remote
Control
Operation
The remote control transmits the signals to the system.
1
|
Signal transmitter |
|
||
|
|
|
2 |
|
|
|
|
3 |
|
|
|
|
4 |
|
5 |
|
1 |
5 |
|
|
|
|||
6 |
|
|
|
|
|
|
3 |
6 |
|
4 |
|
|
7 |
|
2 |
CANCEL |
10 |
||
|
|
|||
|
9 |
|
||
7 |
ON OFF SET |
8 |
||
11 |
12 |
|||
AUTO CLEAN |
||||
8 |
|
17 |
9 |
|
13 |
|
14 |
||
|
|
|||
15 |
|
16 |
|
|
|
|
|
10 |
|
|
Flip-up door |
11 |
||
|
|
|||
|
(opened) |
12 |
||
|
Operation Mode |
|
||
|
|
|
||
|
Cooling Operation |
|
13 |
|
|
Auto Operation or Auto Changeover |
|
14 |
|
Healthy Dehumidification Operation
15
Heating Operation
• Cooling Model(
), Heat Pump Model(
) 16
17
START/STOP BUTTON
Operation starts when this button is pressed and stops when the button is pressed again.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps low, medium, high and CHAOS.
JET COOL
Used to start or stop the speed cooling. (Speed cooling operates
super high fan speed in cooling mode.)
CHAOS SWING BUTTON
Used to stop or start louver movement and set the desired up/down airflow direction.
ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation. (See page 17)
TIME SETTING BUTTONS
Used to adjust the time. (See page 17)
TIMER SET/CANCEL BUTTON
Used to set the timer when the desired time is obtained and to cancel the Timer operation. (See page 17)
SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
(See page 17)
AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or heating. (See page 19)
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
PLASMA(OPTIONAL)
Used to start or stop the plasma-purification function. (See page 15)
HORIZONTAL AIRFLOW DIRECTION CONTROL BUTTON
(NOT ON ALL MODELS)
Used to set the desired horizontal airflow direction. (See page 18)
RESET BUTTON
Used prior to resetting time or after replacing batteries.
2nd F Button
Used prior to using modes printed in blue at the bottom of buttons. (See page 16)
AUTO CLEAN(OPTIONAL)
Used to set Auto Clean mode.
8 Room Air Conditioner
Loading...