Lg LS35, LS34, CS46 User Manual [el]

OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
LS35** LS34** CS46**
P/NO : MFL67409503(1202-REV01) Printed in Korea
www.lg.com
TABLE OF CONTENTS
A-2
TABLE OF CONTENTS
A-3 SETTING UP THE TV
A-3 Attaching the stand A-5 Tidying cables A-6 Not using the Desk-Type Stand
LANGUAGE LIST
English Deutsch Français Italiano Español Português Nederlands Ελληνικά
B-1 MAKING CONNECTIONS
B-1 Antenna connection B-2 Satellite dish connection B-3 Adapter connection B-5 HDMI connection B-7 Component connection B-9 Composite connection B-10 USB connection B-11 CI module connection B-12 Euro Scart connection
B-19 SPECIFICATIONS
COMMON
LANGUAGE
COMMON
SETTING UP THE TV
Screw(Stand+Head) M4 x 14
Attaching the stand
SETTING UP THE TV
A-3
Image shown may differ from your TV. 19/22/26LS35**
Stand Body
1
2
Stand Base
32LS35**
1
2
Stand Base
Stand Body
4EA
P4 x 16
3
Model 19/22LS35** 26LS35**
Standard screw P4 x 20 M4 x 14
Number of screw 2EA 2EA
3
4EA
M4 x 14
SETTING UP THE TV
A-4
26CS46**
1
2
Stand Base
4EA
M4 x 20
Stand Body
32/42CS46**, 32/42LS34**
1
4EA
M4 x 20
Stand Body
Stand Base
2
3
4EA
M4 x 20
3
4EA
M4 x 20
SETTING UP THE TV
A-5
CAUTION
yWhen attaching the stand to the TV
set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
yTighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
NOTE
yRemove the stand before installing the TV
on a wall mount by performing the stand attachment in reverse.
Tidying cables
Gather and bind the cables with the cable holder. (Only 19LS35**)
Cable Holder
(Only 22/26LS35**)
Cable Holder
(Only 32LS35**)
Cable Holder
CAUTION
yDo not move the TV by holding the cable
holder, as the cable holders may break, and injuries and damage to the TV may occur.
SETTING UP THE TV
A-6
(Only 26/32/42CS46**, 32/42LS34**)
1 Gather and bind the cables with the cable
management.
2 Fix the cable management rmly to the TV.
Cable Management
CAUTION
yDo not move the TV by holding the cable
management, as the cable management may break, and injure and damage to the TV may occur.
Not using the Desk-Type Stand
(Only 26/32/42CS46**, 32/42LS34**)
When installing the wall mounting bracket,
use the Protection cover. This will protect the opening from accumulating dust and dirt.
Push the supplied protection cover into the opening at the bottom of the TV until it locks in place.
Protection cover
OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
www.lg.com
TABLE OF CONTENTS
2
ENGLISH
ENG
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE NOTICE
4 SAFETY INSTRUCTIONS
10 INSTALLATION PROCEDURE
10 ASSEMBLING AND PREPARING
10 Unpacking 14 Parts and buttons 15 Lifting and moving the TV 16 Mounting on a table 18 Mounting on a wall
19 REMOTE CONTROL
20 USING THE USER GUIDE
21 MAINTENANCE
21 Cleaning your TV 21 - Screen, frame, cabinet and stand 21 - Power cord
21 TROUBLESHOOTING
WARNING
yIf you ignore the warning message, you
may be seriously injured or there is a possibility of accident or death.
CAUTION
yIf you ignore the caution message, you may
be slightly injured or the product may be damaged.
NOTE
yThe note helps you understand and use
the product safely. Please read the note carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
les into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.
ENGENGLISH
“DivX Certied® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com . In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
SAFETY INSTRUCTIONS
4
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and remote control in the following environments:
y
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other devices that produce heat
- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
y
This may cause a fire hazard.
Mains plug is the disconnecting device. The plug must remain readily operable.
y
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
y
covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture.
Make sure to connect the power cable to the grounded current. (Except for devices
y
which are not grounded.) You may be electrocuted or injured.
Fix the power cable completely.
y
If the power cable is not fixed completely, a fire can break out.
Ensure the power cord does not come into contact with hot objects such as a
y
heater. This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
y
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
y
flowing in. This may cause water damaged inside the Product and could give an electric shock.
When mounting a TV it on the wall, make sure not to install TV by hanging power
y
and signal cables on the back of the TV. It may cause fire, electric shock.
Desiccant
SAFETY INSTRUCTIONS
Do not plug too many electrical devices into a single multiple electrical outlet.
y
Otherwise, this may result in fire due to over-heating.
Do not drop the product or let it fall over when connecting external devices.
y
Otherwise, this may result in injury or damage to the product.
Keep the packing anti-moisture material or vinyl packing out of the reach of
y
children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
y
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them.
y
In case that it eats them, take it to see a doctor immediately.
Do not insert a conductor (like a metal chopstick) into one end of the power cable
y
while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted.(Depending on model)
Do not put or store inflammable substances near the product.
y
There is a danger of explosion or fire due careless handling of the inflammable substances.
5
ENGENGLISH
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
y
product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
y
or benzene). Fire or electric shock accident can occur.
Do not allow a impact shock or any objects to fall into the product, and do not drop
y
onto the screen with something. You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
y
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
y
ventilate. It may cause a fire or a burn by a spark.
SAFETY INSTRUCTIONS
6
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion.
y
Fire or electric shock accident can occur. Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
y
service centre.
- The product has been impacted by shock
- The product has been damaged
- Foreign objects have entered the product
- The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
y
the product. Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
y
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
5~7 times
7
CAUTION
Install the product where no radio wave occurs.
y
There should be enough distance between an outside antenna and power lines to
y
keep the former from touching the latter even when the antenna falls. This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
y
Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
If you install the TV on a stand, you need to take actions to prevent the product
y
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
y
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
y
When installing the antenna, consult a qualified service man.
y
This may create a fire hazard or an electric shock hazard.
ENGENGLISH
We recommend that you maintain a distance of at least 5 to 7 times the diagonal
y
screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
y
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
y
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
y
Signal from the remote control may be disturbed by sun light or other strong light.
y
In this case, darken the room.
When connecting external devices such as video game consoles, make sure the
y
connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.
SAFETY INSTRUCTIONS
8
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
y
wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
y
overheating.
- The distance between the product and the wall should be more than 10 cm.
- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
- Do not install the product on a carpet or cushion.
- Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
y
periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
y
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
y
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
y
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
y
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of
y
time. Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
y
with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
y
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it.
y
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
y
power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
SAFETY INSTRUCTIONS
When moving or unpacking the product, work in pairs because the product is
y
heavy. Otherwise, this may result in injury.
Contact the service center once a year to clean the internal parts of the product.
y
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
y
apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
y
on. This is normal, there is nothing wrong with product.
The panel is a high technology product with resolution of two million to six million
y
pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.
You may find different brightness and color of the panel depending on your viewing
y
position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
9
ENGENGLISH
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
y
game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
y
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product. This generated sound does not affect the performance and reliability of the product.
ENGLISH
<
<
ENG
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
10
NOTE
yImage shown may differ from your TV. yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yThe available menus and options may differ from the input source or product model that you are
using. yNew features may be added to this TV in the future. yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption. yThe energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span. yAny damages or injuries by using unapproved items are not covered by the warranty. ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model. yProduct specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions. yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
A
B
*A
10 mm
=
*B
18 mm
A
=
ASSEMBLING AND PREPARING
Remote control and batteries (AAA) (See p. 19) Owner’s manual
Polishing cloth
Cable holder
(Depending on model) (See p. A-5)
Adapter
(Only 19/22/26LS35**) (See p. B-3)
Stand Screw
2EA, M4 x 14 (Only 26LS35**) (See p. A-3)
(Depending on model) Use this to remove dust from the cabinet.
Stand Screw
2EA, P4 x 20 (Only 19/22LS35**) (See p. A-3)
Stand Screw
4EA, P4 x 16 4EA, M4 x 14 (Only 32LS35**) (See p. A-3)
11
ENGENGLISH
or
Stand Screw
8EA, M4 x 20 (Only 26/32/42CS46**, 32/42LS34**) (See p. A-4)
Protection cover
(Only 26CS46**) (See p. A-6)
Protection cover
(Only 42CS46**, 42LS34**) (See p. A-6)
Isolator
(Depending on model) (See p. 13)
Desk-mount screw
(Only 32LS35**, 26/32/42CS46**, 32/42LS34**) (See p. 16)
Protection cover
(Only 32CS46**, 32LS34**) (See p. A-6)
Power Cord
ENGLISH
ENG
ASSEMBLING AND PREPARING
12
Stand Body / Stand Base
(Only 19/22/26LS35**) (See p. A-3)
Stand Body / Stand Base
(Only 32LS35**) (See p. A-3)
Stand Body / Stand Base
(Only 26CS46**) (See p. A-4)
Stand Body / Stand Base
(Only 32/42CS46**, 32/42LS34**) (See p. A-4)
ASSEMBLING AND PREPARING
13
NOTE
yAntenna Isolator Installation Guide
- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.
» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
- Before starting, be sure that the TV antenna is connected.
Wall
ANTENNA/ CABLE IN
Cable / Antenna
or
Isolator
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
1. Connect to TV.
2. Connect to Set-Top box.
ENGENGLISH
“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system
using coaxial cable, may in some circumstances create a re hazard. Connection to a cable distribution
system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING
INPUT
OK
SETTINGS
14
ENGLISH
ENG
Parts and buttons
Screen
Speakers
Remote control and in­telligent1 sensors
Power indicator
Touch buttons
2
Touch Button Description
Scrolls through the saved programmes. Adjusts the volume level.
OK
Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT Changes the input source.
/ I
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING
15
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yAvoid touching the screen at all times, as
this may result in damage to the screen.
yIt is recommended to move the TV in the box
or packing material that the TV originally came in.
yBefore moving or lifting the TV, disconnect the
power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yWhen transporting a large TV, there should be
at least 2 people.
yWhen transporting the TV by hand, hold the TV
as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the left or right.
ENGENGLISH
yHold the top and bottom of the TV frame rmly.
Make sure not to hold the transparent part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
16
ENGLISH
ENG
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall for proper ventilation.
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yDo not place the TV near or on sources
of heat, as this may result in fire or other damage.
10 cm
10 cm
Securing the TV to a table
(Only 32LS35**, 26/32/42CS46**, 32/42LS34**) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand.
WARNING
yTo prevent TV from falling over, the TV
should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
Adjusting the angle of the TV to suit view
(Only 32/42CS46**, 32/42LS34**) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
2020
CAUTION
yWhen adjusting the angle of the product,
watch out for your fingers.
»
Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.
ASSEMBLING AND PREPARING
17
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope. Make sure to keep the rope horizontal with the
at surface.
Using the Kensington security system
(Depending on model)
The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit
http://www.kensington.com.
Connect the Kensington security system cable between the TV and a table.
ENGENGLISH
CAUTION
yMake sure that children do not climb on or
hang on the TV.
NOTE
yUse a platform or cabinet that is strong and
large enough to support the TV securely.
yBrackets, bolts and ropes are not provided.
You can obtain additional accessories from your local dealer.
ASSEMBLING AND PREPARING
18
ENGLISH
ENG
Mounting on a wall
Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the
oor. When you attach the TV to other building materials, please contact qualied personnel.
LG recommends that wall mounting be performed
by a qualied professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
Separate purchase(Wall Mounting Bracket)
Model
VESA (A x B) Standard screw
Number of screws
Wall mount bracket
19/22/26LS35** 32LS35**,
26/32CS46**,
100 x 100 200 x 100 M4 M4
4 4
LSW100B, LSW100BG
32LS34**
LSW100B, LSW100BG
A
B
CAUTION
yDisconnect the power first, and then move
or install the TV. Otherwise electric shock may occur.
yIf you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
yDo not over tighten the screws as this may
cause damage to the TV and void your warranty.
yUse the screws and wall mounts that meet
the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
NOTE
yUse the screws that are listed on the VESA
standard screw specifications.
yThe wall mount kit includes an installation
manual and necessary parts.
yThe wall mount bracket is not provied. You
can obtain additional accessories from your local dealer.
yThe length of screws may differ depending
on the wall mount. Make sure to use the proper length.
yFor more information, refer to the manual
supplied with the wall mount.
Model
VESA (A x B) Standard screw Number of
screws Wall mount
bracket
42CS46**, 42LS34**
200 x 200 M4 4
LSW200B(G), LSW200BX
REMOTE CONTROL
LIST
Q.VIEW
TV/RAD
ENERGY
SAVING
RATIO
SETTINGS
GUIDE
Q.MENU
INFO
FAV
MUTE
P A G E
LIST
Q.VIEW
TV/RAD
ENERGY
SAVING
RATIO
SETTINGS
GUIDE
Q.MENU
INFO
FAV
MUTE
P A G E
P
AD
P
EXIT
EXIT
19
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
CAUTION
yDo not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
Adjusts the brightness of the screen to reduce
energy consumption.
Selects Radio, TV and DTV programme.
Shows programme guide.
Views the information of the current programme
and screen. Resizes an image.
Accesses the saved programme list. Returns to the previously viewed programme. Accesses the main menus. Accesses the Quick menus. Scrolls through menus or options.
Moves to the previous or next screen. Returns to the previous level. Clears on-screen displays and return to TV viewing. Accesses your favourite programme list.
Moves to the previous or next screen. These access special functions in some menus. ( : Red, : Green, : Yellow, : Blue) Recalls your preferred subtitle in digital mode. Controls the MY MEDIA menus, or the SIMPLINK compatible devices (USB,SIMPLINK). These buttons are used for teletext.
1
Changes the input source; Turns the TV on.
Navigation buttons (up/down/left/right)
AD Switches the Audio Description on or off.
PAGE
1
Coloured buttons
Control buttons
2
( )
2
TELETEXT
BUTTONS
ENGENGLISH
USING THE USER GUIDE
20
ENGLISH
ENG
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
User Guide
1 Press SETTINGS to access the main menus. 2 Press the RED button to access the Customer
Support menus.
3 Press the Navigation buttons to scroll to User
Guide and press OK.
PICTURE AUDIO SETUP TIME
MY MEDIAINPUTOPTIONLOCK
Press OK() to set programme settings.
Customer Support Exit
Software Update
Picture Test Sound Test
Signal Test Product/Service Info.
User Guide
Close
CHANNEL Setting
PICTURE, SOUND Setting
OPTION
Advabced Function
Information
SETTING OPTION Language You can select the language of the menu displayed on the screen and the digital sound broadcasting.
y
Menu Language : Selects a language for the display text.
y
Audio Language [In Digital Mode Only] : elect the desired language when
y
Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
Shows the description of the selected menu.
1
You can use ꕌ/ꕍto move between pages. Zooms in or out the screen.
2
1
OPTION > To set language
SETTING OPTION Language You can select the language of the menu displayed on the screen and the digital sound broadcasting.
y
Menu Language : Selects a language for the display text.
y
Audio Language [In Digital Mode Only] : Select the desired language
when watching digital broadcasting containg several
y
watching digital broadcasting containg several voice languages.
two or more subtitle languages are broadcast. ✎ If subtitle data in a selected language is not broad-
Zoom Out
2
voice languages.
Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
two or more subtitle languages are broadcast. ✎ If subtitle data in a selected language is not
broadcast, the default language subtitle will be displayed.
Zoom In
2
cast, the default language subtitle will be displayed.
Close
Close
User Guide
PROGRAMME Setting
PICTURE, SOUND Setting
OPTION
Advabced Function
Information
2
To use input device
To use Energy Saving feature
To set time options
To set TV lock options
To set language
Disabled Assistance
To set other options
3
1
Allows to select the category you want.
1
Allows to select the item you want.
2
You can use ꕌ/ꕍto move between pages. Allows to browse the description of the
3
function you want from the index.
MAINTENANCE / TROUBLESHOOTING
21
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yMake sure to turn the power off and disconnect the power cord and all other cables first. yWhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yTo remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. yTo remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yAvoid touching the screen at all times, as this may result in damage to the screen. yDo not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions. yDo not use any chemicals as this may damage the product. yDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
ENGENGLISH
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem Solution
Cannot control the TV with the remote control.
No image display and no sound is produced.
The TV turns off suddenly.
yCheck the remote control sensor on the product and try again. yCheck if there is any obstacle between the product and the remote control. yCheck if the batteries are still working and properly installed (
yCheck if the product is turned on. yCheck if the power cord is connected to a wall outlet. yCheck if there is a problem in the wall outlet by connecting other products.
yCheck the power control settings. The power supply may be interrupted. yCheck if the Auto sleep feature is activated in the Time settings. yIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
to , to ).
BENUTZERHANDBUCH
LED-LCD-TV / LCD-TV
Bitte lesen Sie dieses Handbuch aufmerksam durch, bevor Sie Ihr Gerät zum ersten Mal verwenden, und bewahren Sie es zur späteren Verwendung auf.
www.lg.com
INHALTSVERZEICHNIS
2
INHALTSVERZEICHNIS
DEUTSCH
DEU
3 LIZENZEN
3 ANMERKUNG ZU OPEN SOURCE-
4 SICHERHEITSHINWEISE
10 INSTALLATIONSVERFAHREN
10 MONTAGE UND VORBEREITUNG
10 Auspacken 13 Teile und Tasten 14 Anheben und Bewegen des TV-Gerätes 15 Montage auf einem Tisch 17 Wandmontage
18 FERNBEDIENUNG
19 DAS BENUTZERHANDBUCH
20 WARTUNG
20 Reinigung des TV-Gerätes 20 - Bildschirm, Rahmen, Gehäuse und
20 - Gehäuse und Standfuß
20 FEHLERBEHEBUNG
SOFTWARE
VERWENDEN
Standfuß
WARNUNG
yBei Nichtbeachtung drohen schwere
Verletzungen, Unfälle und Tod.
VORSICHT
yBei Nichtbeachtung drohen leichte
Verletzungen oder eine Beschädigung des Produkts.
HINWEIS
yDer Hinweis hilft Ihnen dabei, das Produkt
zu verstehen und sicher zu benutzen. Bevor Sie das Produkt zum ersten Mal verwenden, lesen Sie den Hinweis bitte aufmerksam durch.
Loading...
+ 166 hidden pages