7
Water Pressure
8
8
8
9
9
10
11
11
11
11
12
12
How to Remove and Install the Pullout Drawer
13
Leveling and door alignment
15
16
16
17
17
18
19
19
20
20
20
Using the Sliding Out Shelves
21
21
Door-In-Door
22
22 Door-In-Door Case
23 Door-In-Door Door Bins
23 Door-In-Door Lower Bins
Crisper Humidity Control
24
Removing Crisper
24
GLIDE‘N’SERVE
24
25
Modular Door Bin
25
Dairy Bin
25
Freezer Section
25
Ice Bin
26
Durabase
26
Durabase Divider
26
Pull Out Drawer
Operation Instructions
27
28
28
28
General Cleaning Tips
28 Inside Walls
28 Door Liners and Gaskets
28 Plastic Parts
2829Condenser Coil Cover
29
TROUBLESHOOTING
30
A
B
L
K
M
N
H
C
I
D
J
E
F
G
Use this page to become more familiar with the parts and features.Page references are included for
your convenience.
NOTE: This guide covers several different models. The refrigerator you have purchased may
have some or all of the items listed below. The locations of the features shown below may not
match your model.
Digital Sensor Control
A
Door-In-Door Case
B
Shelves
C
Crisper
D
(Keeps fruits and vegetable fresh and crisper)
Glide’N’Serve
E
Automatic Icemaker
F
G
Ice Bin
Pull out Drawer
H
Durabase
I
Divider
J
Fixed Door Bins
K
M Mullion
L
Cheese & Butter Bin
M
Condiment Bin
N
IMPORTANT:
Before you begin, turn the refrigerator
OFF and unplug it.
Remove food and any bins from doors.
(2)
(1)
(4)
(5)
(6)
(7)
To remove the left refrigerator door:
1
(3)
• Open the door. Remove the top hinge cover screw (1).
• Use a flat blade screwdriver to lift the tabs on the front
underside of the cover(2). Lift up the cover.
• Disconnect all the wire harnesses (3).
• Remove the grounding screw(4).
• Rotate hinge lever (5) counterclockwise. Lift the top
hinge (6) free of the hinge lever latch (7).
IMPORTANT:
When lifting the hinge free of the latch,
be careful that the door does not fall
(1)
forward.
(2)
(3)
(4)
(5)
Lift the door from the middle hinge pin and remove the door.
•
•
Place the door, inside facing up, on a non-scratching surface.
2
To remove the right refrigerator door:
• Open the door. Remove the top hinge cover screw (1).
• Use a flat blade screwdriver to lift the tabs on the front
underside of the cover(2). Lift up the cover.
• Rotate hinge lever (3) clockwise.
Lift the top hinge (4) free of the hinge lever latch (5).
IMPORTANT:
When lifting the hinge free of the latch,
be careful that the door is heavy and may
fall forward.
• Lift the door from the middle hinge pin and remove the door.
• Place the door, inside facing up, on a non-scratching surfacE.