LG LRSPC2051ST, LRSPC2051AB Owner’s Manual
WARNINGS AND PRECAUTIONS FOR SAFETY
Please observe the following safety precautions in order to
use safely and correctly the refrigeretor and to prevent
accident and danger dunng repair.
1. Be care of an electric shock. Disconnect power cord
from wall outlet and wait for more than three minutes
before replacing PWI_ parts. Shut off the power
whenever replacing and repairing electric components.
2. When connecting power cord, please wait for more than
five minutes after power cord was disconnected from the
wall outlet.
3. Please check if the power plug is pressed down by the
refrigerator against the wall. If the power plug was
damaged, it may cause fire or electdc shock.
4. If the wall outlet is over loaded, it may cause fire. Please
use its own individual electrical outlet for the refrigerator.
5. Please make sure the outlet is properly earthed,
particularly in wet or damp area.
6. Use standard electrical components when replacing
them.
7. Make sure the hook is correctly engaged.
Remove dust and foreign materials from the housing
and connecting parts.
8 Do net fray. damage, machine, heavily bond, pull out,
or twist the power cord.
9. Please check the evidence of moisture intrusion in the
electrical components. Replace the parts or mask it
with insulation tapes if moisture intrusion was
confirmed.
10. Do not touch the icemaker with hands or tools to
confirm the operation of geared motor.
11. Do not let the customers repair, disassemble, and
reconstruct the refrigerator for themselves. It may
cause accident, electric shock, or fire.
12. Do not store flammable materials such as ether.
benzene, alcohol, chemicals, gas, or medicine in the
refrigerator.
13. Do not put flower vase, cup, cosmetics, chemicals,
etc., or container with full of water on the top of the
refrigerato_
14. Do not put glass bottles with full of water into the
freezer. The contents shall freeze and break the glass
bottles.
15. When you scrap the refrigerator, please disconnect the
door gasket first and scrap it where children are not
accessible.
-3-
I
2002.08.24 245114,3
CIRCUIT DIAGRAM
BASIC DELUXE
"_'_ PWBASSEMBLY,MAIN "":'_" PWBASSEMBLY,MAIN
:1:
_ W,4LL0_L_T
= m,u_11_ AISItW
m
!
|!
::5--c5-
PARTS IDENTIFICATION
4. Ref No. : GR-L247, GR-L207
Cover Hinge
Compartme_ Compartm_t
Cover PWB
\\
t-t t'_
Freezer Refrige_r
Shelf.=
(Steel,
T/Glass)
Drawer -
or Shelf
(optional)
Drawe
Door rack
Conversion Switch
(Meats/Vegetables)
Shelf
(optional)
Box
Shelf
drawer/Meat drawer
Humidity Switch
-15-
MICOM FUNCTION
1. Monitor Panel
1-t. GR-P247, GR-P207, GR-L247, GR-L207
Loc for freezer compartment. Lock button. --
Temperature adjustment button
for freezer compartment,
2. Description of Function
2-1-1. Funnction of Temperature Selection
Division Power Initially On 1st Press 2st Press 3th Press
O
Setting
]temperature
1-22"i
,1.......... ,
O
O
1-2. GR-C247, GR-C207, GR-B247, GR-B207
%.
- Temperatureadjustment button
for refrigerator compartment. Superfreezer.-
-- Temperature adjustment button
Q
1-23"i
Q O
4th Press
Q
Temperature Medium Medium Max Max Min Medium Min
Control
Freezer Control -19 °C -22 °C -23 °C -15 °C -17 °C
Refrigeration 3 °C 2 °C 0°C 6 °C 4 °C
Control
,t _ o
The ICmpcralurecan _y :..3 C dependingon the load condition.
.P.Whenever pressing button, setting is repeated in the order of (Medium) ---*(Medium Max) --, (Max) --, (Min) -,
(Medium Min).
• The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target
temperature, not actual temperature within refrigerator.
• Refrigeration function is weak in the initial time. Please adjust temperature as above after using refrigerator for minimum
2-3 days.
- 25-
MICOM FUNCTION
2-1-2. LCD Back Light Control
1. in order to easily view display status on the LCD, LCD Back Light is turned on for a minute in application of initial power,
for a minute in button manipulation and for a minute after closing time from opening time of door.
2. If pressing any display button once with the backlight turned off, buzzer rings and button function is not performed but
only backlight is turned on (If pressing the first button with the back light turned off, only back light ON function is
performed).
3. If pressing the special freezing button and the freezing temperature adjustment button for more than a second, the back
light is turned on and all the graphics of LCD are turned on. If releasing the button, the LCD graphic is displayed in the
previous status and the back light is turned off (check LCD graphic and back light ONIOFF status).
2-I-3. Outside temperature display function
1. Outside temperature sensor at the left U of refrigerator senses ambient temperature and displays the outside temperature
in the left side of"Outside temperature" text on the LCD of the display part.
2. Ambient temperature is displayed up to -9°C ~ 49°C and displayed as "Lo" for less than -10°C and as "HI" for more than
50°C. If the ambient temperature sensor fails, it is displayed as "Er".
3. Since display temperature of outside temperature is temperature sensed by the ambient sensor in the hinge U of the
freezing room, it may differ from the outside temperature display of other household electrical appliances.
2-t-4. Lock function (display button lock)
1. In power application of refrigerator, the only "Release" text is turned on at the right side of lock graphic of LCD with the
lock release status.
2. If desiring to lock the display status and pressing the lock/release button once, "Release" text isturned off at the right side
of lock graphic of LCD and "Lock" text isturned on with lock status.
3. The only buzzer sound rings and function is not performed even if pressing display button other than lock/release key in
the lock status.
4. If desiring to release the lock status and pressing the lock/release button once, %ock" text is turned off at the right side of
lock graphic of LCD and =Release" text isturned on with lock release status.
2-2. Dispenser use selection
You can select water or ice.
Please select water, slice ice and square ice by pressing
button as you desire.
Please press the push button lightly by catching and pushing in cup.
• The border line isindicated for the selected function.
• "Tak!" sounds if 5 seconds pass after ice comes out.
It is sound that the outlet of ice is closed.
REFERENCE : Please wait for 2-3 seconds in order to take final ice
slices or drops of water when taking out cup from the
pressing switches after taking ice or water.
2-3. Automatic ice maker
• The automatic ice maker can automatically make 8 pieces of i(;e cube at a time, 80 pieces e day. But these quantities may
be varied according to various conditions including how many times the refrigerator door opens and closes.
• ice making stops when the ice storage bin is full.
• If you don't want to use automatic ice-maker, change the ice-maker switch to ON-OFF.
If you want to use automatic ice-maker again, change the switch to OFF-ON.
NOTE : It is normal that a noise is produced when ice made is dropped fete the ice storage bin.
- 26 -
MICOM FUNCTION
2-4. When ice maker does not operate smoothly
lee is lumped together
• When ice is lumped together, take the ice lumps out of the ice storage bin, break them into small pieces, and then place
them into the ice storage bin again.
• When the ice maker produces too small or lumped together ice, the amount of water supplied to the ice maker need to
adjusted. Contact the service center.
If ice is not used frequently, it may lump together.
Power failure
• Ice may drop into the freezer compartment. Take the ice storage bin out and discard all the ice then dry it and place it
back. After the machine is powered again, crushed ice will be automatically selected.
The unit is newly installed
• It takes about 12 hours for a newlyinstalledrefrigerator to make ice in the freezer compartment.
2-5. Super freezer
Please select this function for prompt freezer.
• "On" or "OfF is repeated whenever pressing _ button,
• The arrow mark graphic remains at the On status after flickering 4 times when
selecting Special Refrigeration °On".
• Super freezer function automatically turns off if a fixed time passes.
Ex) Inselecting Ex)Inselecting
"On" "Off"
2-6. Lock
This button stops operation of different button.
• Locking or Release is repeated whenever pressing the _).
- Pressing the other button when selecting 'LOCK', the button does not operate.
Ex) In selec_ng Ex) Inselecting
2-7. Special freezing "LOCK" "LOCK"again
1. Special freezing is function to improve cooling speed of the freezing room by consecutively operating compressors and
freezing room fan. If pressing the special freezing button, °Turn Off" text of the LCD panel is turned off and "Turn On" is
immediately turned on end "Arrow ( C )_graphic is turned on after flickedng once.
2. Special freezing is cycled in order of Selection/Release ("Turn On" / "Turn Oft") whenever pressing the selection button.
3. Special freezing is released if power failure occurs and then returns to the original status.
4. Temperature setting is not changed even if selecting the special freezing.
5. The change of temperature seWng at the freezing room or the cold storage room is allowed with special freezing selected
and processed.
6. The cold storage room operates the status currently set with special freezing selected end processed.
7. If selecting the special freezing, the special freezing function is released after continuously operating compressor and
freezing room fan.
8. If frost removal starting time is arrived during special freezing, special freezing operation is done only for the remaining
time after completion of frost removal when the special freezing operation time passes 90 minutes. If passing 90 minutes,
special freezing operation is done only for 2 hours after completion of frost removal.
9. If pressing special freezing button during frost removal, the special freezing LCD is turned on but if pressing the special
freezing, compressor operates after the remaining time has passed.
10. If selecting special freezing within 7 minutes (delay for 7 minutes of compressor) after the compressor stops,
compressor operates after the remaining time has passed.
11. The freezing room fan motor operates at the high speed of RPM during operation of special freezing.
- 27-
Loading...