LG LP-141XB-B1 Service manual
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
LP141XB
Liquid Crystal Display
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ♦♦♦♦ ) Final Specification
Title 14.1” XGA TFT LCD
BUYER SUPPLIER LG.Philips LCD Co., Ltd.
MODEL
SUFFIX B1
please use the above model name without suffix.
Please return 1 copy for your confirmation
with your signature and comments.
www.jxlcd.com
www.jxlcd.com
SIGNATURE
/
/
/
DATE
****MODEL
* When you obtain standard approval ,
APPROVED BY
S.C.Yun / Manager
REVIEWED BY
J.C.Hong / Manager
B.H.Koo / Manager
PREPARED BY
M.J.Lee / Engineer
H.J.Kim / Engineer
Product Engineering Dept.
LG.Philips LCD Co., Ltd.
LP141XB
DATE
Ver 0.5 Apr 19, 2001 Page 1/24
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
LP141XB
Liquid Crystal Display
CONTENTS
NO. ITEM Page
- COVER 1
- CONTENTS 2
- RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUT E MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTIONS 7
3-3 SIGNAL TIMING SPECIFICATIONS 9
3-4 SIGNAL TIMING WAVEFORMS 10
3-5 COLOR INPUT DATA REFERENCE 11
3-6 POWER SEQUENCE 12
4 OPTICAL SPECIFICATIONS 13
5 MECHANICAL CHARACTERISTICS 14
6 RELIABILITY 18
7 INTERNATIONAL STANDARDS 19
7-1 SAFETY 19
7-2 EMC 19
8 PACKING 20
8-1 DESIGNATION OF LOT MARK 20
8-2 PACKING FORM 20
9 PRECAUTIONS 21
APPENDIX
A-1 OPTICAL CHARACTERISTIC MEASUREMENT EQUIPMENT AND METHOD 23
A-2 LUMINANCE 23
www.jxlcd.com
www.jxlcd.com
A-3 RESPONSE TIME 23
A-4 VIEWING ANGLE 24
Ver 0.5 Apr 19, 2001 Page 2/24
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
LP141XB
Liquid Crystal Display
RECORDS OF REVISIONS
Version No Date Page DESCRIPTION
0.0
0.1
0.2
0.3
0.4
NOV 22, 2000
DEC 21, 2000
DEC 27,2000
JAN 19,2001
MAR 22,2001
www.jxlcd.com
www.jxlcd.com
4,6
6,7
12
14,15
18
14,15
15
4,13
6
7
18
First Draft
Change Module Power consumption from 1.06W to
1.1W(Typ) by changing Liquid crys tal for Image
sticking improvement.
Add Note 3,10.
Change the Power sequence specification.
Add the depth of User Connector area : max 6.1mm.
Change the Shock and Vibration test conditions.
Change the depth of User Connector area
from max 6.1mm to max 6.2mm.
Add Note 3.
Final Specification
Change the luminance specification.
Define the measurement condition about the specifi
-cated rush current and duration of rush current.
Correct the backlight wire color.
Correct the environment test condition(Altitude).
0.5
APR 19,2001
20
12
Add the box size.
Change the power sequence specification
T4( From min 50ms to min 15ms)
Ver 0.5 Apr 19, 2001 Page 3/24
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
LP141XB
Liquid Crystal Display
1. General Description
The LP141XB is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) back light system. The m atrix employs a-Si Thin Film Transistor as the active elem ent. It is a
transmissive type display operating in the normally white mode. This TFT-LCD has a 14.1 inc hes diagonally
measured active display area with XGA resolution(768 vertical by 1024 horizontal pixel array). Each pixel is
divided into Red, Green and Blue sub-pixels or dots which ar e arranged in vertical str ipes. Gray scale or the
brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, pres enting a
palette of more than 262,144 colors.
The LP141XB has been designed to apply the interface method that enables low power, high speed, low EMI.
Flat Link must be used as a LVDS(Low Voltage Differential Signaling) chip.
The LP141XB is intended to support applications where thin thickness, low power are critical factors and
graphic displays are important. In com bination with the vertical arrangement of the sub-pix els, the LP141XB
characteristics provide an excellent flat panel display for office automation products such as Notebook PC.
Timing
Control
Block
CN1
www.jxlcd.com
www.jxlcd.com
CN2
FlatLink interface
Power
Block
Row Driver circuit
Column driver circuit
TFT-LCD
(1024×768)
Backlight Ass’y
General Features
Active screen size 14.1 inches(35.814cm) diagonal
Outline dimensions 298.5(H) × 227(V) × 5.5(D) mm (Typ.)
Pixel pitch 0.279 mm × 0.279 mm
Pixel format 1024 horiz. by 768 vert. pixels
RGB stripe arrangement
Color depth 6-bit, 262,144 colors
Luminance, White 160 cd/m
Power Consumption Total 4.73Watt(Typ.)
Weight 485g (Typ.)
Display operating mode Transmissive mode, normally white
Surface treatments Hard coating (3H),
Anti-glare treatment of the front polarizer
2
(Typ.)
Ver 0.5 Apr 19, 2001 Page 4/24
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
LP141XB
Liquid Crystal Display
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Table 1 ABSOLUTE MAXIMUM RATINGS
Parameter Symbol
Power Input Voltage
Operating Temperature
Storage Temperature
Operating Ambient Humidity
Storage Humidity
Note: 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39℃ Max, and no condensation of water.
V
CC
T
OP
T
ST
H
OP
H
ST
Values
Min. Max.
-0.3
0
-20
10
10
4.0
50
60
90
90
Units Notes
%RH
%RH
Vdc
℃
℃
at 25 ±5℃
1
1
1
1
Wet Bulb
Temperature [℃]
30
www.jxlcd.com
www.jxlcd.com
10
0
-20
10
Dry Bulb Temperature [℃]
20
20 30 40 50
40
50
60
60 70 80 0
95% 80%
60
40
20
10
%
%
%
Humidity [(%)RH]
%
Storage
Operation
Ver 0.5 Apr 19, 2001 Page 5/24
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
LP141XB
Liquid Crystal Display
3. Electrical Specifications
3-1. Electrical Characteristics
The LP141XB requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input which powers the CCFL, is typically generated by an inverter.
The inverter is an external unit to the LCD.
Table 2 ELECTRICAL CHARACTERISTICS:
Parameter Symbol Values Units Notes
Min. Typ. Max.
MODULE:
Power Supply Input Voltage
Power Supply Input Current
Differential Impedance
Power Consumption
Rush Current
Duration of rush current
LAMP
Operating Voltage
Operating Current
Established Starting Voltage
at 25℃
at 0℃
Operating Frequency
Discharge Stabilization Time
Power Consumption
Life Time
Note)The design of the inverter must have specifications for the lamp in LCD Assembly.
The performance of the Lamp in LCM, for example life time or brightness, is extremely influenced by the
characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully designed
so as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure unwanted lighting caused by the mismatch of
the lamp and the inverter(no lighting, flicker, etc) never occurs. When you confirm it, the LCD Assembly
should be operated in the same condition as installed in your instrument.
Notes: 1. The specified current and power consumption are under the Vcc = 3.3V , 25℃, fv = 60Hz condition
whereas full black pattern is displayed and fv is the frame frequency.
2. This impedance value is needed to proper display and measured from LVDS Tx to the mating
connector.
3. The specified rush current and duration of rush current are under the Vcc = 3.3V,
Current limit = 1.6A, 25℃, fv = 60Hz condition whereas full black pattern is displayed and fv is the
frame frequency. The duration of rush current is about 20ms.
4. The variance of the voltage is ±10%.
5. The voltage above V
6. The output of the inverter must have symmetrical(negative and positive) voltage waveform and
symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter
which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may
produce interference with horizontal synchronous frequency and as a result this may cause beat on
the display. Therefore lamp frequency shall be as away as possible from the horizontal synchronous
frequency and from its harmonics in order to prevent interference.
www.jxlcd.com
www.jxlcd.com
should be applied to the lamps for more than 1second for start-up.
s
Otherwise, the lamps may not be turned on.
V
I
Z
I
RUSH
T
RUSH
CC
CC
Pc
V
IL
V
F
T
PL
m
L
s
L
s
3.0
-
90
-
-
-
680(6mA)
3.0
-
-
45
-
10,000
3.3
0.335
100
1.1
1.0
-
725(5mA)
5.0
-
-
58
3.63
3.6
0.370
110
1.22
1.5
30
875(3mA)
6.0
1170
1450
80
3
4.08
-
Vdc
A
Ohm
W
A
ms
V
rms
MA
rms
V
rms
V
rms
kHz
Minutes
W
Hours
1
2
1
3
3
4
5
6
7
8
6mA
Ver 0.5 Apr 19, 2001 Page 6/24
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
7.Let’s define the brightness of the lamp after being lighted for 5 minutes as 100%.
T
8. The lamp power consumption shown above does not include loss of external inverter. The used
lamp current is the lamp typical current.
9. The life is determined as the time at which brightness of lamp is 50% compared to that of initial value
at the typical lamp current on condition of continuous operating at 25 ±2℃.
10. Do not attach a conducting tape to lamp connecting wire. If conducting tape is attached to lamp wire,
TFT-LCD Module can have low luminance and the inverter can have abnormal action because of
leakage current.
is the time required for the brightness of the center of the lamp to be not less than 95%.
s
LP141XB
Liquid Crystal Display
3-2. Interface Connections
This LCD employs two interface connections, a 20 pin connector is used f or the module electronics and the
other connector is used for the integral backlight system.
The electronics interface connector is a model GT122-20P-H13R manufactured by LG Cable. The pin
configuration for the connector is shown in the table below.
Pin Symbol Description Notes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
The backlight interfac e connector is a model BHSR-02VS-1, m anufactured by JST. The mating connec tor
part number is SM02B-BHSS-1 or equivalent. The pin conf iguration for the connector is shown in the table
below.
Table 4 BACKLIGHT CONNECTOR PIN CONFIGURATION
Notes: 1. The high voltage side terminal is colored pink. The low voltage side terminal is black.
Table 3 MODULE CONNECTOR PIN CONFIGURATION (LVDS) [CN1]
Vcc
Vcc
GND
GND
A0M
A0P
www.jxlcd.com
GND
www.jxlcd.com
A1M
A1P
GND
A2M
A2P
GND
CLKM
CLKP
GND
NC
NC
GND
GND
Pin Symbol Description Notes
1
2
Differential Signal
Differential Signal
Differential Signal
Differential Signal
Differential Signal
Differential Signal
Differential Signal
Differential Signal
No Connection
No Connection
Power (3.3V)
Power (3.3V)
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Ground
HV
LV
1. Interface chips
1.1 LCD : SN75LVDS88B (TI)
(SN75LVDS86 core + Timing Controller)
1.2 System : SN75LVDS84(TI)
* Pin to Pin compatible with TI LVDS
2. Connector
2.1 LCD : GT122-20P-H13 R (LG Cable)
2.2 Mating : FI-SE20M (JAE) or compatible
2.3 Connector pin arrangement
Viewing on Display side
Power supply for lamp
(High voltage side)
Power supply for lamp
(Low voltage side)
1 … 20
CN1
CN2
1
1
Ver 0.5 Apr 19, 2001 Page 7/24
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
Product Specification
Table 5 REQUIRED SIGNAL ASSIGNMENT FOR FlatLink Transmitter
Pin # Pin Name Require Signals Pin # Pin Name Require Signals
1 D4 R4 48 D3 R3
2 Vcc Vcc 47 D2 R2
3 D5 R5 46 GND GND
4 D6 G0 45 D1 R1
5 GND GND 44 D0 R0
6 D7 G1 43 NC NC
7 D8 G2 42 LVDS GND LVDS GND
8 Vcc Vcc 41 Y0M A0M
9 D9 G3 40 Y0P A0P
10 D10 G4 39 Y1M A1M
11 GND GND 38 Y1P A1P
12 D11 G5 37 LVDS Vcc LVDS Vcc
13 D12 B0 36 LVDS GND LVDS GND
14 NC NC 35 Y2M A2M
15 D13 B1 34 Y2P A2P
16 D14 B2 33 CLKOUTM CLKM
17 GND GND 32 CLKOUTP CLKP
18 D15 B3 31 LVDS GND LVDS GND
19 D16 B4 30 PLLGND PLL GND
20 D17 B5 29 PLLVcc PLL Vcc
21 Vcc Vcc 28 PLLGND PLL GND
22 D18 HSYNC 27 SHDN SHDN
23 D19 VSYNC 26 CLKIN Dclk
24 GND GND 25 D20 DE(Data Enable)
www.jxlcd.com
www.jxlcd.com
LP141XB
Liquid Crystal Display
Notes : Refer to LVDS Transmitter Data Sheet for detail descriptions.
Ver 0.5 Apr 19, 2001 Page 8/24
Loading...