LG LP0910WNR User Manual [en, es]
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE:PORTABLE AIR CONDITIONER
MODEL: LP0910WNR
www.lgappliances.com
Style Windows
62
17
KEY PARTS AND COMPONENTS
1
AIR DISCHARGE
The direction of air can be controlled wherever you want to cool
by adjusting the horizontal louver.
Adjusting the horizontal louver up and down will change
vertial airflow.
2
CONTROL PANEL AND DISPLAY
Easy-to-read digital display shows the set temperature and
indicator lights show the operating mode. Simple push buttons
make changing settings quick and easy.
3
SWIVELING CASTERS
Swiveling casters allow you to move the air conditioner easily
on most floor surfaces.
4
INTEGRATED HANDLES
Integrated handles provide a convenient grip when lifting the
air conditione
5
INFRARED REMOTE CONTROLLER
The remote controller allows you to adjust the temperature
and operate most functions of the air conditioner
from across the room.
2
4
3
5
Dry
9
1
6
EXHAUST AIR OUTLET VENT
Insert the large adapter at end of the hose into the hole on the
back of the air conditioner.Align the pins on the connector with
the slots in the hole. Twist slightly clockwise until it locks into place.
7
BOTTOM DRAIN PORT
Used when water tank is full or free of using long time.
Before moving the unit, drain the internal water collection
tank completely by using bottom drain port.
8
AIR FILTER
9
HOSE
Use the di
Use the diffuser and hose to connect the air conditioner to the
window installation kit to vent exhaust air outside.
AND DIFFUSER
Check all the accessories included in the package and
please refer to the installation instructions for their usage.
6
6
8
7
PART AND FEATURES
CONTROL PANEL AND REMOTE
6
Dry
4 3
5
2
1
Operation of functions is the same when using the remote or the control panel,
unless otherwise stated.
For detailed instructions on each function,see the following pages.
1
POWER
Operation begins when this button is pressed and stops
when you press the button again.
MODE
2
Press this button to select COOL,FAN,DRY mode.
FAN SPEED
3
Adjusts the circulation fan speed between HIGH,
LOW fan speed.
4
TIMER
Press this button to set TIMER ON, TIMER OFF
or NO TIME
5
UP & DOWN
3
9
7
4
Press these buttons to set room temperature
or time when in Time On/Off mode.
6
LED Display
Display different signals accordingly.
sh
li
Eng
5
Dry
2
8
8
1
1
7
SLEEP MODE
Setting sleeping mode, the temperature will rise
1 °C after 2 hours, and another 2 hours later, rise 1 °C
8
CELSIUS AND FAHRENHEIT EXCHANGE BUTTON
9
CONTINUOUS
After setting mightiness, the unit will keep running no matter
what temperature it sets, and E4
E1 E2 protection works.
NOTE
To vary from Fahrenheit to Celsius, press both UP and DOWN button
other
batteries:
USING THE CONTROLS
Control panel buttons shown. Operation using the remote control is the same, unless
specifically noted.
1. COOLING MODE
· Press MODE button to choose Cool
mode, the Cool mode indicator will flash.
·
Press UP or DOWN button to set room
temperature between
·
Press FAN button (or High/Low button)
to select high, low fan speed.
62 F to 86 F
.
2. FAN MODE
· Press MODE button (or Fan button) to
choose Fan mode, the Fan mode indicator
will flash.
Select the fan speed by press FAN button
or press High / Low button directly.
· The temperature can not be set.
3. TIMER MODE
· When the appliance is switch off, press
TIMER button to set timer-on.
Press Up or Down button to adjust time
·
from 1 hour to 24 hours. The Time
on indicator will flash.
When the appliance is running, press
·
TIMER button to set timer-off.
Press Up or Down button to adjust time
·
from 30 minutes to 24 hours. The Time
off indicator will flash.
4. SLEEP MODE
Setting sleep mode, the temperature
·
will rise 1
hours later, rise 1
· Then it will keep steady and low fan blow.
after 2 hours, and another 2
5. CONTINUOUS
After setting continuous，the unit will keep
·
running no matter what temperature it sets,
and E4,E1,E2 protection works.
·
High fan blows.
6. DRY MODE
Press MODE button to choose Dry mode,
·
the Dry mode indicator will flash.
·
Under Dry mode, don’t install exhaust hose,
take out the drain plug, and lead the condensing
water to the container through water pipe.
· When first enter the Dry mode, if Ta≥59℉，
the compressor starts; if Ta≤55℉, the
compressor stops; for other conditions, it keeps
the state as before.
·
Under Dry mode, fan motor acquiesces in
low speed. The fan speed cannot be changed;
·
Under Dry mode, the setting temperature is
invalid, and it indicates the ambient
temperature(50℉~95℉).
10
NOTE
Always point the remote at the sensor. The remote may not work if the
sensor is in bright light or if there is not a clear path between the remote
and the sensor.
INSTALLATION INSTRUCTIONS
ATTACHING THE HOSE AND DIFFUSER
NOTE: The air conditioner is shipped with the hose installed. The hose may be removed for cleaning
and storage, if necessary. Simply reverse the steps below to remove.
UNLOCK
LOCK
Insert the large adapter end of the hose into
the hole on the back of the air conditioner.
12
Loading...