LG LM-W315 User Manual

LM-W315

QUICK START GUIDE

ENGLISH

MBM00000000 (1.0)

www.lg.comPrinted in XXXXX

ENGLISH

Visit www.lg.com to view the user guide and more information.

• Some contents and illustrations may differ from your device depending on the region, service provider, software version, or OS version, and are subject to change without prior notice.

• Always use genuine LG accessories. The supplied items are designed only for this device and may not be compatible with other devices.

• Available accessories may vary depending on your region, country or service provider.

Watch layout

Warning Do not close or push the hole located at the bottom of the device with a sharp object. Doing so may cause your device to

Power Key

work improperly.

Charging the watch

Before using your watch for the ﬁ rst time, you should charge the battery.

• Use the charging cradle provided with the your watch to charge its battery.

• Connect the charging cradle to a power outlet and place the watch on it. The watch will turn on

Charging Terminals

automatically.

• To maximize battery life, make sure that the battery is fully charged before you use it for the first time.

Charging the watch

Cautions to be taken regarding the corrosion of charging terminals

Exposing to sweat or other foreign material during the use of the product may cause corrosion at the terminals while charging it. To prevent this, wipe the product with a cloth before charging.

Cautions before wearing the leather strap

• The LG Watch Urbane’s stitched leather strap is thick enough to meet high quality standard. Before wearing the leather strap, please bend it back and forth a few times. This will help you feel more comfortable when wearing it.

• Depending on the user's skin condition, the watch may cause unintended allergic reactions on the skin it's in contact with.

Turning on the watch Turning off the watch

To turn on the watch, press and hold the Power Key (on the right hand side of the watch) for a few seconds.

Power Key

Press and hold the Power Key

until the apps list appears. Tap Settings > Power off. When prompted with the

message Power off: Are you

sure?, tap

Before Pairing

Before pairing, please do the following on the phone or tablet.

Make sure that the Android version on your phone or tablet is Android

4.3 or higher and supports Bluetooth®.

• To find out whether your phone or tablet supports Android Wear, visit http://g.co/WearCheck from your phone or tablet.

• If your phone or tablet is not Android 4.3, or later, please check with your manufacturer for a possible software update.

Make sure your phone or tablet is next to your watch. On your phone or tablet, download the Android Wear app from the

Play Store is installed and updated to the latest version on your phone or tablet.

app and install it. Check that the Android Wear app

Before Pairing

Make sure your phone or tablet is connected to mobile data or Wi-Fi.

You need a data connection to set up your watch for the ﬁ rst time.

Keep the watch connected to power during setup.

NOTES:

• Depending on the software installed on your watch, your watch may automatically download and install an update.

• Depending on the network condition, the setup process might take over 20 minutes.

How to pair your watch

Turn on the watch and swipe the welcome screen left to begin.

Tap a language.

Connect your watch to a power source and swipe left to continue.

Tip: If the battery is less than 20%, your watch may not move to the

next step.

Swipe left following the onscreen instruction until the watch code is

displayed.

How to pair your watch

Open the Android Wear app on your phone or tablet. Turn

Bluetooth on during setup, if it isn’t already on.

On your phone or tablet, you’ll see a list of nearby devices. Tap your

watch’s code.

You’ll see a pairing code on your phone or tablet and watch. Check that

the codes match.

Tap Pair on your phone or tablet to start pairing.

You’ll see a conﬁ rmation message on your watch once it is paired. This

can take a few minutes, so please wait a while.

Follow the onscreen instructions to complete the initial setup.

Heart Rate Sensor

Wear your watch on your wrist correctly before measuring the heart rate.

Heart Rate Sensor

NOTES:

• Loose fitting or too much movement may cause inaccurate measurements.

• Never look directly at the heart rate sensor light as this may damage your eyesight.

• When heart rate readings are inaccurate, retake your heart rate measurements by putting your watch on the inside of one of your wrists.

Connecting to another mobile device

If you want to connect your watch to another device, you must reset your watch.

Reset your watch

This setting resets your watch’s settings to their factory default values and deletes all of your data.

Press and hold the Power Key until the apps list appears. Tap Settings > Factory reset. You are prompted to conﬁ rm. Tap .

• Your watch connects to one mobile device at a time.

• Factory reset erases all data from your watch's memory. After completion, it is ready to connect to another mobile device.

Safety information

Before turning on your product, review the basic safety information provided here.

General safety & handling

While using your product, be aware of the following common-sense guidelines.

Your environment

• Safe operating temperatures. Use and store your product in temperatures between 0°C/32°F and 35°C/95°F. Exposing your product to extremely low or high temperatures may result in damage, malfunction, or even explosion.

• While driving. When driving a car, driving is your first responsibility. Using a mobile device or accessory for a call or other application while driving may cause distraction. Keep your eyes on the road.

• Around explosives. Do not use in areas where sparks from the product

might cause a fire or explosion.

• On airplanes. Observe all rules and instructions for use of electronic devices. Most airlines allow electronic use only between and not during takeoffs and landings. There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can pass your product through airport X-ray machines. But do not send it through airport magnetic detectors or expose it to magnetic wands.

• Always follow any special regulations in a given area. Turn your device off in areas where use is forbidden or when it may cause interference or danger.

• Changing the wrist straps to metal straps might cause Bluetooth/Wi-Fi connectivity problem.

+ 35 hidden pages