LG LH-W777HTS User manual

Model: LH-W777HTS, W93-T/R

Unique Features

Full HD up-scaling
(1080p)

View Full HD picture quality
with simple setup.

Go to page 9

Portable In

Listen to music from your
portable device (MP3,
Notebook, etc).

Go to page 18

P/NO : MFL57006576

HT762TZV-A0_DIRNDLK_ENG_6576 7/14/08 6:26 PM Page 1

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE

COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to consti­tute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the man­ufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings should be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.

CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dan­gerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or deteri­oration, unplug it, discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized service center.

Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.

This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.

European representative :

LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : [phone])

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

HT762TZV-A0_DIRNDLK_ENG_6576 7/14/08 6:26 PM Page 2

3

Contents

Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

LED indicator of Wireless Transmitter . . . . . . . . . . . . .7

LED indicator of Wireless Receiver . . . . . . . . . . . . . .7

Setting an ID of Wireless Transmitter . . . . . . . . . . . . .7

Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . .8-9

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . .12-13

Setting the sound mode . . . . . . . . . . . . . . . . . . . . . .13

Displaying Disc Information . . . . . . . . . . . . . . . . . . .14

Playing a disc or file . . . . . . . . . . . . . . . . . . . . . .14-15

Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . .17

Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . .17

Listening to music from your USB device . . . . . . . . .18

Listening to music from your portable player . . . . . . .18

Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . .21

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

What is SIMPLINK?

Some functions of this unit are controlled by TV’s remote control when this unit and
LG TV with SIMPLINK are connected through HDMI connection.

• Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,
Power Off, etc.

• Refer to the TV owner’s manual for the details of SIMPLINK function.

• LG TV with SIMPLINK function has the logo as shown above.

• Use a higher version cable than 1.2A HDMI cable.

Welcome to your new DVD Receiver

HT762TZV-A0_DIRNDLK_ENG_6576 7/14/08 6:26 PM Page 3

4

Setting up

Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).

cc

Connect the wires to the speakers.

Connect the other end of each wire to the correct speaker according to
the color coding

:

To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.

Attaching the speakers to the DVD receiver

aa

You will have received 4 speaker cables.

Each one is color-coded by a band near each end and connects one of
the 4 speakers to the DVD receiver.

bb

Connect the wires to the DVD receiver.

Match each wire’s colored band to the same colored connection terminal
on the rear of the DVD receiver. To connect the cable to the DVD receiv­er, press each plastic finger pad to open the connection terminal. Insert
the wire and release the finger pad.

Green

Orange

Red

White

Center

Sub Woofer

Front

Front

Above screen, directly in front of you.

In front of you, to the right of the
screen.

In front of you, to the left of the
screen.

POSITION

SPEAKER

COLOR

1 Fix the post to the base by rotating the post. And Draw the

speaker cord through the hole on the base.

2 Draw the speaker cord through the hole on the speaker.

3 Fix the speaker to the stand by rotating the speaker. Connect the

speaker cord to the appropriate terminals on the speaker.

The speakers are detached from the speaker stands.

Assembling to the Speakers

HT762TZV-A0_DIRNDLK_ENG_6576 7/14/08 6:26 PM Page 4

5

Attaching the
Wireless Transmitter
to the DVD receiver

aa

Connect the DC power
cable to the unit and trans­mitter.

bb

Connect the SOUND SIG­NAL connector of the
Wireless Transmitter and
rear (right, left) speaker of
the main set with the
sound signal cable.

Attaching the speakers to the Wireless Receiver

aa

Connect the power cord of the Wireless Receiver to the outlet.

bb

Connect the wires to the Wireless Receiver.

Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cable.

aa

bb

aa

aa

bb

bb

Setting up

HT762TZV-A0_DIRNDLK_ENG_6576 7/14/08 6:26 PM Page 5

6

Be careful of the following

• Be careful to make sure children do not put their hands or any objects into
the *speaker duct.

*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).

• Set the distance between this unit and Wireless Receiver within 10m.

• Optimum performance can be implemented only when the Wireless
Transmitter and the Wireless Receiver within distance of 2m to 10m is used
since communication failure may occur if longer distance is used.

• Be sure to match the speaker cable to the appropriate terminal on the com­ponents: + to + and – to –. If the cables are reversed, the sound will be dis­torted and will lack bass.

•

It takes a few seconds (and may take longer) for the

Wireless Transmitter

and

Wireless Receiver

to communicate with each other.

• When the unit is turned off, the Wireless Transmitter is in standby mode (off)
automatically after about 10 seconds.

• If the Wireless Transmitter is turned off, the Wireless Receiver will not func­tion.

About Ferrite Core - optional

Be sure to attach the ferrite core to the speaker cable (for connecting to
this unit and wireless receiver).

This ferrite core can reduce noises.

How to attach the ferrite core - optional

1 Press the stopper [a] of the ferrite core to open.
2 Wind the speaker cables once on the ferrite core. (Refer to the fig.3 and

comment.).

3 Close the ferrite core until it clicks.

The
length
here is as
short as
possible.

(fig.3)

HT762TZV-A0_DIRNDLK_ENG_6576 7/14/08 6:26 PM Page 6

7

Be careful of the following

If there is a strong electromagnetic wave product nearby, interference may
occur. Put the unit (Wireless Receiver and main unit) away from there.(Ex:
Microwave oven)
If there is no audio signal for longer than 10 minutes, the Wireless Receiver
and Wireless Transmitter will automatically switch to standby mode. In power
saving mode, both LEDs will turn red. LEDs will turn blue when there is any
audio signal back.
If you operate main unit then wireless speakers (rear speakers) sound within a
few seconds in standby mode.

LED indicator of Wireless
Transmitter

BLUE The main set is turned on, everything is connected

and transmitting.

RED The wireless transmitter is in standby mode.

OFF (No display) The DC cable is disconnected to the unit.

LED color

Operation

LED indicator of Wireless
Receiver

BLUE

The

Wireless Receiver is receiving the signal of

the

Wireless transmitter

.

RED The Wireless Receiver is in standby mode.

OFF (No display) The Wireless Receiver is turned off.

LED color

Operation

Setting an ID of Wireless
Transmitter

1 Connect the SOUND SIGNAL connector of

the transmitter and the rear (right, left) speaker
terminals of main unit with the SOUND
SIGNAL cable.:-

2 Connect the DC cable to the unit

and transmitter.:-

3Turn off the Wireless Receiver: POWER Switch

4 Press the ID. for more than 3 seconds:

The Blue LED indicator will quickly flicker ID.

5Turn on the Wireless Receiver: POWER Switch

When the unit is manufactured, the ID is already set. If an interference
occurs or you use a new Wireless Receiver, an ID is set again.

ON Wireless Kit

HT762TZV-A0_DIRNDLK_ENG_6576 7/14/08 6:26 PM Page 7