LG LHB535 Owner’s Manual

i _iiixila

iiii i

i i

Life's Good

x iiii

OWNER'S

WiFi Network Blu-ray Disc TM

Home Theater System

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL
LHB535

P/NO : MFL62863598

HB905SB-AD.BUSALL_OM.indd 1 2010-01-08 4,_,_,Li11:47:49

www.lgusa.com

2 Safety Information

1

t0

,<

Safety Information

F

CAUTION

o

CAUTION: TOREDUCETHERISKOFELECTRIC

SHOCKDO NOTREMOVECOVER(ORBACK)NO

USER-SERVICEABLEPARTSINSIDEREFERSERVICING

TOQUALIFIEDSERVICEPERSONNEL.

This lightning flash with arrowhead
symbol within an equilateral

triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the

product's enclosure that may be of
sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an
equilateral triangle is intended

to alert the user to the presence
of important operating and

maintenance (servicing)
instructions in the literature

accompanying the product.

Cautions and Warnings

WARNING: TO PREVENT FIREOR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSETHIS PRODUCTTO RAIN

OR MOISTURE.
WARNING: Do not install this equipment in a

confined space such as a book case or similar unit.

CLASS1 LASERP_ODUCr
K_SSS1 LASS_PRO_UKI

LUOKAN1 LASERLAIRS
K_SS 1 _SS_ APPARA_

CLASSSl_£OaUlr LASER

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer's

instructions.
Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the
product and to protect it from over heating.The

openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar

surface.This product shall not be placed in a built-
in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer's
instruction has been adhered to.

CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read

this owner's manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.

Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try
to open the enclosure.Visible laser radiation when

open. DO NOT STARE INTO BEAM.

HB905SB-AD.BUSALL_OM.indd 2 2010-01-08 &#,#,O11:48:1;

Safety Information 3

CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a

dedicated circuit;
That is, a single outlet circuit which powers only

that appliance and has no additional outlets or
branch circuits. Check the specification page of this

owner's manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your

appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the cord
exits the appliance.To disconnect power from the
mains, pull out the mains cord plug.When installing

the product, ensure that the plug is easily accessible.
CAUTION:The apparatus shall not be exposed to

water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.

This device is equipped with a portable battery or
accumulator.

Safety way to remove the battery or the battery
from the equipment: Remove the old battery

or battery pack, follow the steps in reverse order
than the assembly.To prevent contamination of
the environment and bring on possible threat

to human and animal health, the old battery or
the battery put it in the appropriate container at

designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, flee

reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat

such as sunshine, fire or the ]fie.

FCC Compliance Statement

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

NOTE:This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.This

equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation.
If this equipment does cause harmful interference

to radio or television reception, which can be
determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment
and receiver.

• Connect the equipment into an outlet on a
circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV
technician for help.

CAUTION :Any changes or modifications not
expressly approved by the party responsible for

compliance could void the user's authority to
operate this equipment.

th

o

HB905SB-AD.BUSALL_OM.indd 3 2010-01-08 6,_,,_,_11:48:1_

4 Safety Information

FCC RF Radiation Exposure Statement :This

equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

This equipment should be installed and operated
with minimum distance 20 cm (7.9 inch) between

the radiator and your body. End users must follow

co

the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be

,<

coqocated or operating in conjunction with any
other antenna or transmitter.

CAUTION: Regulations of the FCC and FAA prohibit

_4

airborne operation of radio-frequency wireless

o

devices because their signals could interfere with
critical aircraft instruments.

Responsible Party :

LG Electronics USA, Inc.

1000 Sylvan Avenue
Englewood Cliffs, NJ 07632

TEL. :+ 1-800-243-0000

Notes on Copyrights

• Because AACS (Advanced Access Content System)
is approved as content protection system for BD

format, similar to use of CSS (Content Scramble

System) for DVD format, certain restrictions are
imposed on playback, analog signal output, etc.,

of AACS protected contents. The operation of this

product and restrictions on this product may vary

depending on your time of purchase as those

restrictions may be adopted and/or changed by

AACS after the production of this product.

• Furthermore, BD-ROM Markand BD+ are

additionally used as content protection systems
for BD format, which imposes certain restrictions

including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain

additional information on AACS, BD-ROM Mark,

BD+, or this product, please contact an authorized

Customer Service Center.

• Many BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only
connect your player directly to your TV, not to a

VCR. Connecting to a VCR results in a distorted

picture from copy-protected discs.

• This product incorporates copyright protection

technology that is protected by U.S. patents
and other intellectual property rights. Use of

this copyright protection technology must be
authorized by Macrovision, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.

• Under the U.S. Copyright Jaws and Copyright
Jaws of other countries, unauthorized recording,

use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs

and other materials may subject you to civil and/
or criminal liability.

HB905SB-AD.BUSALL_OM.indd 4 2010-01-08 4,_,_,L111:48:1;

Safety Information 5

IMPORTANT SAFETY
INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Followall instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A

grounding type plug has two blades and a third
grounding prong.The wide blade or the third

prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an

electrician Forreplacement of the obsolete outlet.

10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience

receptacles, and the point where they exit from
the apparatus.

11. Only use attachments/accessories specified by
the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with

the apparatus.When a cart is used, use caution
when moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or
when unused for long periods of time.

14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has

been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

to

,<

F

o

HB905SB-AD.BUSALL_OM.indd 5 2010-01-08 &,&,,&,Q11:48:18

Contents

1

Safety Information

2 Cautions and Warnings

Preparation

8 Introduction
8 About the "_)" Symbol

Display

S Symbols Used in this

Manual

9 Supplied Accessories
9 Playable Discs

11 File compatibility

12 Regional Code
12 AVCHD (Advanced Video

Codec High Definition)

12 Certain System

Requirements
12 Compatibility Notes
13 Remote control

14 Front panel

15 Rear panel

16 Speaker Connection
16 Attaching the speakers to

the player
17 Positioning the system
18 Connecting to Your TV

18 HDMI Connection
19 What is SIMPLINK?

20 Component Video

Connection

20 Video Connection
21 Resolution Setting

21 Connections with external device
21 Antenna connection

22 AUX Connection
22 PORT. IN connection

23 OPTICAL IN 1/2 connection
23 HDMI IN 1/2 connection
24 Connecting to your Home Network

24 Wired network connection
25 Wired Network Setup

26 Wireless Network

Connection

27 Wireless Network Setup
30 USB device connection

32 Settings
32 Adjust the Setup Settings

32 [DISPLAY] Menu
34 [LANGUAGE] Menu

34 [AUDIO] Menu
35 [LOCK] Menu

37 [NETWORK] Menu
38 [OTHERS] Menu

39 Sound Effect

HB905SB-AD.BUSALL OM.indd 6 2010-01-08 6,_,,_,Q11:48:18

6

Troubleshoofing

40 General Playback
42 Advanced Playback

45 On-Screen display
48 Enjoying BD-LIVE

49 Playing a movie file and VR disc
51 Viewing a photo

53 Listening to music
56 Playing the iPod
58 Radio Operations

59 Playing content via your home

network

64 Using NetCast TM Entertainment

Access

64 Using Netflix
67 VUDU
70 CinemaNow

74 YouTube TM

77 Enjoying Pandora internet

radio

80 Picasa TM Web Albums

$3 Using the AccuWeather

85 Notes on Discs
85 Handling the Unit

86 General
87 Picture
87 Sound

88 Network

7

Appendix

89 Controlling a TV with the supplied

remote control

89 Setting up the remote to

control your TV

90 Area Code List

91 Language code List
92 Network Software Update

92 Network update notification
92 Software Update
94 Available resolution according to

the resolution setting

95 Trademarks and Licenses

97 Specifications
99 Important Information Relating to

Network Services

100 Open source software notice
101 Gracenofe ® End User License

Agreement

8

Warranty

102 Warranty

HB905SB-AD.BUSALL_OM.indd 7 2010-01-08 $_,_,1_11:48:1_

8 Preparation

2

Preparation

Introduction

About the "®" Symbol Display

"®"may appear on yourTV display during

operation and indicates that the function
explained in this owner's manual is not

available on that specific media.

Symbols Used in this Manual

NOTE

Indicates specialnotes and operating features.

CAUTION

Indicates cautions for preventing possible

damages from abuse.

A section whose title hasone of tile following
symbols areapplicable only to the disc

represented bythe symbol.

I:]D]

I ID_V4D]

I r:\V['lll,]

I r:T,ID]

JLv_[,lvlI=1

_Lv_Ll_'J[,I
i',,1:[,)I[,]

BD-ROMdisc
DVD-Video,DVD±R/RWin

Video mode or VRmode
and finalized

DVD±R/RWin AVCHD
format

Audio CDs
Movie files
Music files

Photo files

HB905SB-AD.BUSALL_OM.indd 8 2010-01-08 &,_,,_,O11:48:18

Preparation 9

Supplied Accessories

Videocable (1)

Color<oded Speaker
Cables(S)

[

Remote control (1)

FManterma (1)

Nero MediaHome 4
Essentials software

CD-ROM (1)

Batteries(2)

AM anterma (1)

Playable Discs

8/,.r_yo,-sc - Discssuch asmovies that carl

..... 8/ 12cm (3.2/4.7 inches) disc

DVD_R aJSO

.............. 8 / 12cm (3.2/4.7 inches) disc

Blu-rayDisc

be purchased or rented.

BD-R/REdiscs that contain,

Movie, Musicor Photo files.

DVD-VIDEO
Discssuch asmovies that carl be

purchasedor rented.
DVD±R

8/ 12cm (32/4.7 inches) disc

Video mode and finalized only

Supports the dual layer disc

FinalizedAVCHDformat

DVD±Rdiscsthat contain

Movie, Musicor Photo files

DVD-RW

RW

8/ 12cm (3.2/4.7 inches) disc

VRmode,Video mode and

finalizedonly

FinalizedAVCHDformat

DVD-RWdiscsthat contain

Movie, Musicor Photo files.

DVD+RW

Video mode and finalized only

AVCHDformat

FinalizedAVCHDformat

DVD+RWdiscs that contain

Movie, Musicor Photo files.

6"

............ 8 / 12cm (3.2/4.7 inches) disc

DiGiTAL AUDIO

HB905SB-AD.BUSALL_OM.indd 9 2010-01-08 4,_,_,L111:48:1;

Audio :D

Audio CDsor CD-Rs/CD-RWs

in audio CDformat

CD-R/RW
8/ 12cm (S.2/4.7 inches) disc

CD-R/RWdiscsthat contain

audio titles, Movie, Musicor

Photo files.

10 Preparation

qJ

HB905SB-AD.BUSALL_OM.indd 10 2010-01-08 &,_,,_,Q11:48:20

File compatibility

Overall

Available Fileextensions:
"jpg","j peg",%png",%avi",%divx",%rnpg",%mpeg","

.mkv",'tm p4",'tmp3",'twma",'twav"

Available file extensions differ depending
on the DLNA servers.

Some"wav"files are not supported on this

player.

The file name is limited to 180 characters.

Depending on tile sizeand number of tile

files,it maytake severalminutes to readthe
contents on the media.

Maximum Files/Folder: Lessthan 2000(total
number of files and folders)
CD-R/RW, DVD_+R/RW,BD-R/REFormat:
ISO9660+JOLIET,UDFand UDFBridgeformat

Video files
Available resolution size:

1920x 1080(Wx H)pixels

Playable subtitle: SubRip(.srt/.txt), SAMI
(.smi),SubStation Alpha (.ssa/.txt),MicroDVD

(.sub/.txt),VobSub (.sub),SubViewer 1.0(.sub),
SubViewer2.0 (.sub/.txt),TMPlayer(.txt), DVD
Subtitle System(.txt)

VobSub (.sub)is not available in tile

[Home Link] feature.

Playable Codec format: "DIVX3.xx","DIVX4.
xx","DIVXS.xx","XVID", "DIVX6.xx"(Standard

playback only), H.264/MPEG4 AVC,MPEG1SS,
MPEG2PS,MPEG2TS

Playable Audio format: "Dolby Digital","DTS",
"MP3","WMA","AAC","AC3"

Not alltile WMA and AACAudio format is

compatible with this unit

Sampling frequency:
within 32 kHzto 48 kHz(WMA),
within 16 kHzto 48 kHz(MP3)

Bit rate:
within 20 kbpsto 320 kbps(WMA),

within 32 kbpsto 320 kbps(MP3)

Preparation 11

6"

Audio files

Sampling frequency:

within 8 kHzto 48 KHz(WMA),
within 11kHzto48 kHz(MP3)

Bit rate:

within 8 kbps to 320 kbps (WMA, MP3)

Photo files
Recommended size:

Lessthan 4,000x 3,000x 24 bit/pixel
Lessthan 3,000x 3,000x 32 bit/pixel

Progressiveand Iosslesscompression photo
image files are not supported.

HB905SB-AD.BUSALL_OM.indd 11 2010-01-08 &AALi 11:48:2,

12 Preparation

Regional Code

This unit hasa regional code printed on the

rearof the unit. This unit carl play only BD-ROM

or DVDdiscs labeled sameas tile rearof the

unit or "ALL't

AVCHD (Advanced Video Codec
High Definition)

q]

This player carl playbackAVCHDformat

discs.Thesediscsare normally recordedand
usedin camcorders.

The AVCHDformat isa high definition

digital video cameraformat.

The MPEG4 AVC/H.264format iscapable

of compressing images at higher eMciency
than that of the conventional image
compressing format.

SomeAVCHDdiscs use the"x.v.Color"
format.

This player carl playbackAVCHDdiscs using

"x.v.Color"format.
SomeAVCHDformat discsmay not play,

depending on the recording condition.
AVCHDformat discsneed to befinalized.

"x.v.Color"offersawider color range than
normal DVDcamcorder discs.

Certain System Requirements

Forhigh definition video playback:

High definition display that has

COMPONENTor HDMIinput jacks.

BD-ROMdiscwith high definition content.
HDMIor HDCPcapable DVIinput on your

display device is required for some content

(asspecified bydisc authors).
Forup-conversion of standard definition

DVD,a HDMIor HDCPcapable DVIinput

on your display device isrequired for copy

protected content.

Compatibility Notes

BecauseBD-ROMisa new format,

certain disc, digital connection and other
compatibility issuesare possible. If you

experience compatibility problems, please
contact an authorized Customer Service

Center.
Viewing high-definition content and up-

converting standard DVDcontent may

require a HDMl<apable input or HDCP-

capable DVIinput on your display device.

Some BD-ROMand DVDdiscs may restrict
the useof some operation commands or
features.

You carl usea USBdevice that isused
to store some disc related information,

including downloaded omline content. The
disc you are using will control how long this

information isretained.

HB905SB-AD.BUSALL_OM.indd 12 2010-01-08 _,,g,,g,O11:48:20

Remote control

s"

H

s"

E!

El

i"

=]

Remove the battery cover
on the rear o[ the Remote

Control, and insert two R03
(size AAA) batteries with 0
and O matched correctly.

• • • • • • n• • • • • •

(POWER):Switches the

playerON or OFR

OPEN/CLOSE:Opensand

closestile disc tray.
RADIO&INPUT: Changesinput

mode.
0-9 numerical buttons:

Selectsnumbered options in a
menu.

CLEAR:Removesa mark on
tile searchmenu ora number

when setting the password.
REPEAT:Repeatsa desired

section or sequence.

• • • • • • []• • • • • •

_1_1/1_1_SCAN:Searches
backward or forward.

I_1_111_1_1SKIP:Goesto the
next or previous chapter / track

/file.

• (STOP): Stops playback.

• (PLAY): Starts playback.
II (PAUSE): Pauses playback

SPEAKER LEVEL: Sets the
sound level of desired speaker.

SOUND EFFECT: Selects a
sound effect mode.

VOL +/- : Adjusts speaker

volume.
OPTICAL:Changesinput

mode to optical directly.
MUTE: Mute the unit.

Preparation 13

HOME: Displaysor exits the

[Home Menu].
MUSICID: When connected

to the network, carl provide
information about tile current

songwhile movie playback.

0 INFOIDISPLAY:Displaysor

exitsOn-Screen Display.
Direction buttons: Selectsan

option in the menu.

_) ENTER:Acknowledges

menu selection.
8% RETURN:Exitsthe menu

or resumes playback.

TITLE/POP-UP: Displaystile

DVDtitle menu or BD-ROM's
pop-up menu, if available.

DISCMENU: Accessesmenu
on a disc.

Colored (R, G,Y, B) buttons:
Useto navigate on menus.

Bbutton: Selectsmono/stereo
in FM mode.

MARKER:Marks any point
during playback.

SEARCH:Displaysor exits the
searchmenu.

SLEEP:Setsa certain period of
time after which the unit will

switch to off.

• REC:Recordsan audio CD.

TV Control Buttons: See page

8g.

-e

6"

HB905SB-AD.BUSALL_OM.indd 13 2010-01-08 _,,a,,a,011:48:2

14 Preparation

Front panel

[] [] [] [] [] []

__ []

[] (b/I (POWER)Button
[] DiscTray

[] iPod Dock
] Remote sensor

[] Displaywindow
[] Volume control
[] PORT.IN

[] USBPort

[] Operation buttons

-_ (OPEN/CLOSE)
I_/11(PLAY/PAUSE)

• (STOP)
I_/I_1 (SKIP)

F(Function)

Changes the input source or function.

HB905SB-AD.BUSALL_OM.indd 14 2010-01-08 _,,&,,&,O11:48:2

Rear panel

H n D DD

Preparation 15

mind D _m 6"

[] AC Powercord

Pluginto the power source.

[] Speakersconnectors
[] Cooling Fan

[] Ar_ter_naConnector
[] VIDEOOUT

[] AUX (L/R)INPUT

[] COMPONENTVIDEO(Y PBPR)

OUTPUT(PROGRESSIVESCAN)
[] OPTICALIN I(TV)/2
[] HDMI IN(type A,Version 1.3)1/2

[] HDMI OUT(type A, Version 1.3)

Connect to TV with HDMI inputs.
[] LANport

HB905SB-AD.BUSALL_OM.indd 15 2010-01-08 6,g,,g,O11:48:2 _-

16 installation

3

Installation

Speaker Connection

Attaching the speakers to the
player

I.Connect speakerwires to the main unit.

F

o

Eachspeakerwire is color<oded. Use
matching color wires for corresponding
speakers.

Color Speaker Position
Grey Rear Rearright

Blue Rear Rearleft

Green Center Center
Orange Sub Any front position

woofer

2. Connect tile speakerwire to tile terminal
on the speaker.

Makesure the wire marked black goes in

to the terminal marked"-"(minus) and the
other wire goes in to tile terminal marked

"+"(plus).

fui! 88

k:

Red Front Front right

White Front Front left

HB905SB-AD.BUSALL_OM.indd 16 2010-01-08 &AAO 11:48:2_

installation 17

Positioning the system

Thefollowing illustration shows an example
of positioning the system. Note that the

illustrations in theseinstructions differ from tile
actual unit for explanation purposes.

Forthe best possible surround sound, all tile
speakersother than the subwoofer should be
placed at tile samedistance from tile listening

position (@).

_) Front left speaker (L)/

® Front right speaker (R):

Place the front speakers to the sides of the
monitor or screen and as flush with the screen

surface as possible.

© Center speaker:
Placethe center speakerabove or below the

monitor or screen.
© Surround left speaker (L)/

Surround right speaker (R):
Placethese speakers behind your listening
position, facing slightly inwards.

® Subwoofer:

The position of the subwoofer isnot so
critical, because low basssounds arenot

highly directional. But it is better to place

the subwoofer near the front speakers.Turn

it slightly toward the center of tile room to
reduce tile wall reflections.

@ Unit

7

o

HB905SB-AD.BUSALL_OM.indd 17 2010-01-08 _,_,_,0 11:48:22

18 Installation

Connecting to Your TV

Makeone of tile following cormections,
depending on the capabilities of your existing
equipment

HDMIcormection (pages 18-19)
Component Video connection (page 20)

Video connection (page 20)

g

o

HDMI Connection

Ifyou [lave a HDMITVor monitor, you

carl connect it to this player using a HDMI
cable(TypeA, Version 1.3).Connect tile HDMI

OUTjack on tile playerto the HDMI INjack on
a HDMIcompatible TVor monitor.

Player

TV

Setthe TV'ssource to HDMI(referto TV's
Owner's manual).

HB905SB-AD.BUSALL_OM.indd 18 2010-01-08 &,&,,&,Q11:48:23

installation 19

What is SIMPLINK?

IITIPLInK

Some functions of this unit are controlled by

the TV's remote control when this unit and LG
TV's with SIMPLINK are connected through

HDMI connection.

Controllable functions by LGTV's remote
control; Play, Pause, Scan, Skip, Stop, Power Off,

etc.

Refer to tile TV owner's manual for tile details

of SIMPLINK function.

LGTV's with SIMPLINK function has tile logo as
shown above.

7

F

o

HB905SB-AD.BUSALL_OM.indd 19 2010-01-08 &AAQ 11:48:2

20 Installation

Component Video Connection

Connect the COMPONENTVIDEO OUTjacks on
the player to the corresponding input jacks on

the TV using Y Pb Prcables. You carl hear the

sound tile through tile system's speaker.

Player

o

TV

Green
Blue

Red

Video Connection

Connect theVIDEOOUTjackon the playerto
tile video injack on theTV using a video cable.

You carl hearthe sound through tile system's
speakers.

Player

=_]]]][]3:_DYellow

TV

HB905SB-AD.BUSALL_OM.indd 20 2010-01-08 &,_,,_,Q11:48:2

Installation 21

Resolution Setting

Tile player provides severaloutput resolutions
for HDMI OUTandCOMPONENTVIDEOOUT

jacks.You carl change the resolution using

[Setup] menu.

1, PressHOME.

2. Use </> to select tile [Setup] and press
ENTER.Tile [Setup] menu appears.

3. Use A/V to select [DISPLAY] option then
press > to move to the second level.

4. Use A/V to select tile [Resolution] option

then press ENTERor > to move to tile third

level.

Connections with
external device

Antenna connection

Connect the supplied anterma for listening to
the radio.

7

F

o

D

5. Use A/V to select tile desired resolution

then press ENTERto confirm your selection

HB905SB-AD.BUSALL_OM.indd 21 2010-01-08 &AA0 11:48:2_

22 Installation

AUX Connection

You carl enjoy the sound of your component
with the analog audio outputjacks from the

speakersof tile system.

Connecttile analogaudiooutputjacksof
yourcomponentintotheAUXL/R(INPUT)orl
this unit.Andthenselecttile [AUX]optionby

pressirlgRADIO&INPUTandENTER.

You carl alsouse Fbutton on the front panel to

selectthe input mode.

o

Player

Red

White

PORT. IN connection

You carl enjoy tile sound of your portable
audio playerfrom tile speakersof the system.

Connect the headphones (or line out )lack of
tile portable audio playerinto the PORT.IN

of this unit. And then selecttile [PORTABLE]
option by pressing RADIO&INPUTandENTER.

You carl alsouse Fbutton on tile front panel to
select the input mode.

MP3 player, etc..

To the audio output jacks
of your component

(TV, VCR, etc.)

HB905SB-AD.BUSALL_OM.indd 22 2010-01-08 &,a,,a,Q11:48:3(

Installation 23

OPTICAL IN 1/2

connection

You carl enjoy the sound of your component
with the digital optical corlrlection from the

speakersof the system.
Connect theoptical output jack of your

component into the OPTICALIN112jacks on
tile unit. And then selectthe [OPTICAL]option

by pressing RADIO&INPUTand ENTER.Or press
OPTICALto selectdirectly.

You carl also useF button on tile front panel to
select the input mode.

HDMI IN 1/2 connection

You carl enjoy the pictures and sound of your
component with this cor_r_ection.

Connect the HDMIOUTjack of your
component into the HDMI IN 1or 2jack on this

unit. And then select the [HDMI IN 1/2] option
by pressing RADIO&INPUTand ENTER.

You carl alsouse Fbutton on the front panel to

selectthe input mode.

7
F

o

To the HDMI OUT jack

of your component
(set-top box, digital
satellite receiver,

video game machine,
etc.)

Tothe digital
optical output jack
of your component

HB905SB-AD.BUSALL_OM.indd 23 2010-01-08 &,&,,&,O11:48:_

24 Installation

Connecting to your

Home Network

This player carl be connected to a local area

network (LAN) via tile LAN port on the rear
panel or tile internal wireless module.
By corlnecting tile unit to a broadband home
network, you have access to services such

as software updates, Home Link, BD-LIVE

interactivity and streaming services.

Wired network connection

F

Usinga wired network provides the best
performance, becausethe attached devices

o

connect directly to the network and are not

subject to radio frequency interference.
Pleasereferto the documentation for your

network device forfurther instructions.

Connect tile player'sLANport to the
corresponding port on your Modem or Router

using acommercially available LANor Ethernet

cable (CAT5or better with RJ45connector).

Inthe example configuration for wired

connection below, this player would be able to
accesscontent from either of tile PCs.

Router

_ pc

Player

HB905SB-AD.BUSALL_OM.indd 24 2010-01-08 &,&,,&,Q11:48:31

Installation 25

Wired Network Setup

Beforesetting the wired network, you need to
connect tile broadband intemet to your home

network.
Ifthere isa DHCPserveron tile local area

network (LAN)via wired connection, this player
will automatically be allocated an IPaddress.

After making tile physicalconnection, a small
number of home networks may require the
player'snetwork setting to be adjusted. Adjust
tile [NETWORK]setting asfollow.

1. Select[Corlrlection Setting] option in tile
[Setup] menu then pressENTER.

2. Tile [Connection Setting] menu appear on
the screen. UseA/V to select tile [Wired]

and pressENTER.

4. Use A/V/</> to select the IP mode

between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
addressautomatically.

5.Select [OK]and press ENTERto apply
network settings.

6. Tile playerwill askyou to test tile network
connection. Select [OK]and pressENTERto

cornplete tile network con nection.

7
F

o

D

3. Selects [Yes]and pressENTERto continue.
The new connection setting resetsthe
current network settings.

HB905SB-AD.BUSALL_OM.indd 25 2010-01-08 &AALi 11:48:_

26 installation

7. If you select [Test] and press ENTERat step
5 above, tile network corlrlection status is

displayed on the screen.
You carl also test it on the [Connectiorl

Status] in the [Setup] menu.

Wireless Network Connection

(h

F

Another corlrlection option is to usean Access

o

Point or awireless router. Inthe example

configuration for wirelessconnection below,
this playerwould be able to accesscontent
from either of the PCs.

Wireless

Communication

Broadband

Service

Tile network configuration and connection

method may vary depending on the
equipment in use and the network
environ ment.

This player is equipped with an IEEE802.11n

(2.4GHzband only) wireless module, which
also supports tile 802.11b/g standards.Fortile

best wireless performance, we recommend

using a IEEE802.1In certified Wi-Finetwork

(accesspoint or wirelessrouter).
AvailableWiFi standards:

802.11b/802.1 lg /

802.1In (single-band 2.4GHz)

Refer to tile setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.

@

HB905SB-AD.BUSALL_OM.indd 26 2010-01-08 &AAO 11:48:3

Installation 27

Wireless Network Setup

Beforesetting the wireless network, you need

to:

- connect tile broadband intemet to the
wireless home network.

- settile accesspoint orwireless router.

- note the SSIDand security code of the

network.

Forthe wireless network corlnection, the
player needsto be setup for network

communication. This adjustment carl be done
from tile [Setup] menu. Adjust the [NETWORK]

setting asfollow. Setting up tile accesspoint
or the wireless router is required before
connecting the player to tile network.

1. Select[Corlrlection Setting] option in tile
[Setup] menu then pressENTER.

2. Tile [Connection Setting] menu appear on
the screen. UseA/V to select [Wireless]and

pressENTER.

3. Selects[Yes]and pressENTERto continue.
The new conrlection setting resetsthe
current network settings.

.....

4. Tile playerscanstile allavailable access
points or wireless routerswithin range and

display them asa list.Use A/V to select an
accesspoint or wirelessrouter on tile list,
and then pressENTER.

If you have security on your access point
or wireless router, verify that the WEP or

WPA key that was entered into the player
matches the router's information exactly.
You need to input the security code as
necessary.

7

o

D

HB905SB-AD.BUSALL_OM.indd 27 2010-01-08 _,,A,,A,{)11:48:3z

28 Installation

[Manual] - Your access point may not be
broadcasting its access point name(SSID).
Check your router settings through your

computer and either set your router to
broadcast SSID,or manually enter the
access point name(SSID)in [Manual].

[Push Button] -If your access point or
wireless router that supports Push Button

Configuration method, select this option
and press tile Push Button or] your access
point or wireless router within 120 counts.
You do not need to know the access point

name (SSID)and security code of your
access point or wireless router.

S°

UseA/V/</> to select the IPmode
between [Dynamic] and [Static].

Normally, select [Dynamic] to allocatean IP
addressautomatically.

o

Notes on Network Connection:

Marly network corlnection problems during
setup carloften be fixed by re-setting the

router or modem. After connecting the
playerto tile home network, quickly power

off and/or disconnect tile power cable of
the home network router or cable modem.

Then power on and/or connect tile power
cable again.

Depending on tile internet service provider
(ISP),tile number of devices that carl

receiveinternet service may be limited by

the applicable terms of service. Fordetails,
contact your ISR

Our company isnot responsible for
any malfunction of tile player and/or

the internet connection feature due to
communication errors/malfunctions

associated with your broadband internet
connection, or other connected equipment.

The featuresof BD-ROMdiscsmade
available through tile Internet Connection

feature are not created or provided

byour company, and our company is
not responsible for their functionality

or continued availability. Some disc

related materialavailable by tile Internet

Connection may not be compatible with

6.

Select [OK]and pressENTERto apply
network settings.

7.

Tile player will askyou to test tile network

connection. Select[OK] and pressENTERto
complete the network connection.

8°

If you select [Test] at step 7 above, tile
network corlrlection status is displayed on

the screen.
You carl also test it on tile [Corlrlection
Status] in the [Setup] menu.

this player.Ifyou havequestions about such
content, pleasecontact the producer of the

disc.

Someintemet contents may require a
higher bandwidth corlrlection.

Evenifthe player isproperly connected and

configured, someinternet contents may

not operate properly because of intemet
congestion, tile quality or bandwidth of
your intemet service,or problems at tile

provider of tile content.

HB905SB-AD.BUSALL_OM.indd 28 2010-01-08 6,_,,_,_11:48:3z

Installation 29

Some intemet corlrlection operations may

not be possible due to certain restrictions

set by tile Intemet service provider (ISP)
supplying your broadband Intemet
corlrlection.

Any feescharged byan ISPincluding,
without limitation, connection charges are

your responsibility.
A 10 Base-Tor 100 Base-TXLAN port is

requiredfor wired connection to this player.

Ifyour internet service does not allow for
such a connection, you will not be able to
connect the player.

You must use a Routerto usexDSLservice.
A DSLmodem is required to use DSLservice

and a cable modem is required to usecable

modem service.Depending on the access

method of and subscriber agreement with
your ISP,you may not be able to usethe

internet connection feature contained in
this playeror you may be limited to tile

number of devices you carl connect at tile
sametime. (If your ISPlimits subscription
to one device,this player may not be

allowed to connect when a PCisalready
connetted.)

The useof a "Router"may not be allowed
or its usage may be limited depending on

the policies and restrictions of your ISRFor
details,contact your ISPdirectly.

The wirelessnetwork operate at 2.4GHz

radiofrequencies that are alsoused by
other household devices such ascordless

telephone, B/ue_oo_hc°devices, microwave
oven, and carl be affected by interference

from them.
Turnoffall unused network equipment in

your localhome network. Some devices

maygenerate network traffic.

Fortile purpose of tile better transmission,
placing tile playerfrom the accesspoint as
closeas possible.

In some instances,placing the accesspoint
or wireless router at least0.45m (1.5ft)
above the floor mayimprove tile reception.

Move closer to tile accesspoint if possible
or re-orient tile player sothere isnothing
between it andthe accesspoint.

The reception quality over wirelessdepends
on marly factors such astype of the access

point, distance between the player and
accesspoint, and the location of the player.

Setyour accesspoint or wireless router to
Infrastructure mode. Ad-hoc mode isnot

supported.

7
F

o

HB905SB-AD.BUSALL_OM.indd 29 2010-01-08 &AA0 11:48:34

30 installation

USB device

connection

This playercarl play movie, music and photo
files contained in the USBdevice.

1. Insert a USBdevice to the USBport until it
fits into place.

F

o

When you connect the USBdevice on
the HOMEmenu, the player playsa music

file contained in the USBstoragedevice
automatically. If tile USBstoragedevice is
containing various types of files,a menu for
the file type selection will appear.

2. Select [Movie], [Photo] or [Music] using
</>, and press ENTER.

3. Selectafile using AIV/</> and pressPLAY

or ENTERto play the file.
You carl check tile space of the USBdevice

on the screen.

4. Selecttile other mode. And withdraw the
USBdevicecarefully.

Fileloading maytakesfew minutes depending

on the number of content stored in tile USB

storagedevice. PressENTER((_))while [Cancel]
isselected to stop loading.

HB905SB-AD.BUSALL_OM.indd 30 2010-01-08 &AAO 11:48:3,