How it Works
LG
Loading...
LHB326
User Manual
64 pgs5.93 Mb0
Specification
2 pgs156.59 Kb0

LG LHB326 User Manual

OWNER’S MANUAL
Network Blu-ray™ Home Theater
Please read this manual carefully before operating your set and retain it for future reference.
LHB326
P/NO : MFL67084769
www.lg.com
Safety Information
Getting Started 3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous
enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built­in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
voltage within the product’s
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specied herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
1
Getting Started
Getting Started4
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the equipment: Remove the
1
old battery or battery pack, follow the steps
Getting Started
in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, shall be placed on the apparatus.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment
and receiver.
yConnect the equipment into an outlet on a
circuit dierent from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Getting Started 5
Notes on Copyrights
yBecause AACS (Advanced Access Content
System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
yFurthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems for BD format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact an authorized Customer Service Center.
yMany BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.
yThis product incorporates copyright protection
technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi. Reverse engineering or disassembly is prohibited.
yUnder the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip­over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power­supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
1
Getting Started
Table of Contents6
Table of Contents
1 Getting Started
3 Safety Information 8 Introduction 8 – Playable Discs and symbols used in
this manual
9 – About the “7” Symbol Display 9 – Supplied Accessorries 10 – File compatibility 11 – AVCHD (Advanced Video Codec High
Definition) 12 – Certain System Requirements 12 – Regional Code 12 – Compatibility Notes 13 Remote control 14 Front panel 14 Rear panel
2 Connecting
15 Positioning the system 16 Speaker Connection 16 – Attaching the speakers to the player 17 Connecting to Your TV 17 – HDMI Connection 18 – What is SIMPLINK? 19 – Component Video Connection 19 – Video Connection 20 – Resolution Setting 20 Antenna connection 21 Connections with external device 21 – AUX Connection 21 – PORT. IN connection 22 – OPTICAL IN connection 22 – HDMI IN connection 23 Connecting to your Home Network 23 – Wired network connection 24 – Wired Network Setup 25 – Wireless Network Connection 26 – Wireless Network Setup 28 USB device connection 28 – Playback content in the USB device
3 System Setting
29 Settings 29 – Adjust the Setup Settings 29 – [DISPLAY] Menu 31 – [LANGUAGE] Menu 31 – [AUDIO] Menu 32 – [LOCK] Menu 33 – [NETWORK] Menu 34 – [OTHERS] Menu 35 Sound Effect
4 Operating
36 General Playback 36 – Using [HOME] menu 36 – Playing a Disc 36 – Playing a file on a disc/USB device 37 – Enjoying BD-Live 38 – Basic operations for video and audio
content 38 – Basic operations for photo content 38 – Using the disc menu 39 – Resume playback 39 Advanced Playback 39 – Repeat Playback 40 – Repeating a specific portion 40 – Marker Search 41 – Using the search menu 41 – Changing content list view 42 – Viewing content information 42 – Selecting a subtitle file 42 – Last Scene Memory 43 – Options while viewing a photo 43 – Listening to music while slide show 44 On-Screen display 44 – Displaying content information on-
screen 45 – Playing from selected time 45 – Listening to a different audio track 45 – Selecting a subtitle language 45 – Watching from a different angle 46 – Changing TV Aspect Ratio 46 – Changing subtitle code page 46 – Changing Picture Mode 47 Audio CD to USB Recording 48 Radio Operations
TM
48 – Presetting the Radio Stations 48 – Deleting a saved station 48 – Deleting all the saved stations 48 – Improving poor FM reception 49 Enjoying the NetCast™ Entertainment
Access
5 Troubleshooting
50 Troubleshooting 50 – General 50 – Network 51 – Picture 51 – Sound 51 – Customer Support 51 – Open source software notice
Table of Contents 7
1
2
3
6 Appendix
52 Controlling a TV with the Supplied
Remote Control
52 – Setting up the remote to control your
TV 53 Network Software Update 53 – Network update notification 53 – Software Update 55 Area Code List 56 Language code List 57 Trademarks and Licenses 58 Video Output Resolution 59 Specifications 61 Maintenance 61 – Handling the Unit 61 – Notes on Discs 62 Important Information Relating to
Network Services
7 Warranty
63 Limited Warranty
4
5
6
7
Getting Started8
Introduction
1
Playable Discs and symbols used in this manual
Getting Started
Media/Term Logo Symbol Description
yDiscs such as movies that can be purchased or
rented.
yBD-R/RE discs that are recorded in BDAV format.
yBD-R/RE discs that contain Video, Audio or
Photo les.
yISO 9660+JOLIET, UDF and UDF Bridge format
yDiscs such as movies that can be purchased or
rented.
yVideo mode and nalized only
ySupports the dual layer disc also
Finalized AVCHD format
yDVD±R/RW discs that contain Video, Audio or
Photo les.
yISO 9660+JOLIET, UDF and UDF Bridge format
Blu-Ray
DVD-ROM
DVD-R
DVD-RW
DVD+R
DVD+RW
(8 cm /
12 cm)
e
y u i
r
o
y u i
DVD-RW
(VR) (8 cm / 12 cm)
Audio CD
(8 cm / 12 cm)
CD-R/RW
(8 cm / 12 cm)
Note –
Caution –
r
t
y u i
,
>
VR mode and nalized only
Audio CD
yCD-R/RW discs that contain Video, Audio or
Photo les.
yISO 9660+JOLIET, UDF and UDF Bridge format
Indicates special notes and operating features.
Indicates cautions for preventing possible damages from abuse.
Note
,
yDepending on the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
yDepending on the recording software & the
nalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.
yBD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
yIf you record a disc using a personal
computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)
yThis player requires discs and recordings to
meet certain technical standards in order to achieve optimal playback quality.
yPre-recorded DVDs are automatically set to
these standards. There are many dierent types of recordable disc formats (including CD-R containing MP3 or WMA les) and these require certain pre-existing conditions to ensure compatible playback.
yCustomers should note that permission
is required in order to download MP3 / WMA les and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
yYou have to set the disc format option
to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)
Getting Started 9
About the “7” Symbol Display
“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specic media.
Supplied Accessorries
Video cable (1) Speaker cables (5)
Remote control (1) Battery (1)
FM antenna (1) AM antenna (1)
Wireless LAN Adapter (USB Type) (1)
1
Getting Started
Getting Started10
File compatibility
Video files
1
Getting Started
File
Location
Disc,
USB
Audio files
File
Extension
“.avi”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free)
Codec Format Audio Format Subtitle
XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS
Dolby Digital, DTS, MP3, WMA, AAC, AC3
SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)
File
Location
Disc,
USB
Photo files
File
Location
Disc,
USB
File
Extension
“mp3”, “.wma”, “.wav”, “.m4a” (DRM free)
File
Extension
“.jpg”, “.jpeg”, “.png”, "gif"
Sampling Frequency Bitrate Note
within 32 - 48 kHz (WMA), within 11 - 48 kHz (MP3)
Recommanded
Size
Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel
within 32 - 192 kbps (WMA), within 8 - 320 kbps (MP3)
Progressive and lossless compression photo image les are not supported.
Some wav les are not supported on this player.
Note
Note
,
yThe le name is limited to 180 characters.
yA “avi “le which is encoded “WMV 9 codec”
is not supported.
yDepending on the size and number of the
les, it may take several minutes to read the contents on the media.
yThis unit cannot support the ID3 Tag
embedded MP3 le.
yThe total playback time of music le
indicated on the screen may not correct for VBR les.
yHD video les contained on the CD or USB
1.0/1.1 may not played properly. Blu-ray disc, DVD or USB 2.0 are recommended to play back HD video les.
yThis player supports H.264/MPEG-4 AVC
prole Main, High at Level 4.1. For a le with higher level, the warning message will appear on the screen.
yThis player does not support les that are
recorded with GMC
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
yThis player supports UTF-8 les even it
contains Unicode subtitle contents. This player can not support the pure Unicode subtitle les.
yDepending on the types of le or ways of
recording, it may not play back.
yA disc which was recorded by multi-session
on normal PC is not supported on this player.
yTo be playback a movie le, movie le name
and Subtitle le name must be the same.
yIf video codec is MPEG2 TS or MPEG2 PS,
subtitle does not play back.
1
or Qpel
*
2
.
*
Getting Started 11
AVCHD (Advanced Video Codec High Definition)
yThis player can playback AVCHD format discs.
These discs are normally recorded and used in camcorders.
yThe AVCHD format is a high denition digital
video camera format.
yThe MPEG-4 AVC/H.264 format is capable of
compressing images at higher eciency than that of the conventional image compressing format.
yThis player can playback AVCHD discs using
“x.v.Color” format.
ySome AVCHD format discs may not play
depending on the recording condition.
yAVCHD format discs need to be nalized.
y“x.v.Color” oers a wider color range than normal
DVD camcorder discs.
1
Getting Started
Getting Started12
Certain System Requirements
For high denition video playback:
yHigh denition display that has COMPONENT or
1
Getting Started
HDMI input jacks.
yBD-ROM disc with high denition content.
yHDMI or HDCP capable DVI input on your display
device is required for some content (as specied by disc authors).
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.
Compatibility Notes
yBecause BD-ROM is a new format, certain disc,
digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center.
yThis unit allows you to enjoy functions such
as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Prole 1 version
1.1/ Final Standard Prole). Secondary video and audio can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions in the disc.
yViewing high-denition content and up-
converting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device.
ySome BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yDolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 5.1 channels if you use HDMI connection for the audio output of the unit.
yYou can use a USB device to store some disc
related information, including downloaded on­line content. The disc you are using will control how long this information is retained.
STOP PLAY
PAUSE/STEP
Remote control
Getting Started 13
Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert a R03 (size AAA) battery with 4 and 5 matched correctly.
• • • • • • a • • • • • •
RADIO&INPUT (P): Changes input mode.
MARKER: Marks any point during playback.
(POWER): Switches the player
1
ON or OFF.
(OPEN/CLOSE): Opens and
B
closes the disc tray.
SEARCH: Displays or exits the search menu.
INFO/DISPLAY (m): Displays or exits On-Screen Display.
HOME (n): Displays or exits the [Home Menu].
DISC MENU: Accesses menu on a disc.
• • • • • • b • • • • •
PRESET(-/+): Selects programme of Radio.
TUNING (-/+) : Tunes in the desired radio station.
W/S/A/D
right): Used to navigate on-screen displays.
ENTER (b): Acknowledges menu selection.
BACK (x): Exits the menu or resumes playback.
TITLE/POPUP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.
(STOP): Stops playback.
Z
(PLAY): Starts playback.
z
PAUSE/STEP: Pauses playback
M c/v
backward or forward.
C/V
next or previous chapter / track / le.
(up/ down/ left/
(SCAN): Searches
(SKIP): Goes to the
• • • • • • c • • • • •
SPEAKER LEVEL: Sets the sound level of desired speaker.
SOUND EFFECT: Selects a sound eect mode.
VOL +/- : Adjusts speaker volume.
OPTICAL: Changes input mode to
optical directly.
MUTE(@): Mute the unit.
Coloured (R, G, Y, B) buttons:
Use to navigate on menus.
MONO/STEREO: Selects mono/ stereo in FM mode.
SLEEP: Sets a certain period of time after which the unit will switch to o.
REC: Records an audio CD.
X
0-9 numerical buttons: Selects numbered options in a menu or inputs letters in the keypad menu.
CLEAR: Removes a mark on the search menu or a number when setting the password.
REPEAT (h): Repeats a desired section or sequence.
: Marked button is not available.
?
• • • • • • d • • • • •
TV Control Buttons: See page 52.
1
Getting Started
Getting Started14
Front panel
1
Getting Started
(POWER) Button
a 1/!
Disc Tray
b
Remote Sensor
c
Display Window
d
Volume Control
e
Rear panel
AC power cord
a
Speakers connectors
b
Cooling Fan
c
Antenna Connector
d
VIDEO OUT
e
COMPONENT VIDEO (Y PB PR)
f
OUTPUT (PROGRESSIVE SCAN)
PORT. IN
f
USB Port
g
Operation buttons
h
(OPEN/CLOSE)
B
(PLAY / PAUSE)
d/M
(STOP)
Z C/V
F (Function)
Changes the input source or function.
OPTICAL IN (TV)
g
HDMI IN
h
HDMI OUT
i
LAN port
j
AUX (L/R) INPUT
k
(SKIP)
Positioning the system
B
DEE
F
A
A
G
C
ABA
A
B
D
E
F
A
A
A
A
A
G
C
DEE
F
A
G
C
B
A
DEE
F
A
G
C
B
DEE
F
A
G
C
DEE
F
A
G
E
EFG
E
F
G
G
The following illustration shows an example of positioning the system. Note that the illustrations in these instructions dier from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (
).
Connecting 15
Caution
>
yBe careful to make sure children not to put
their hands or any objects into the *speaker duct. *Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure).
yPlace the center speaker at a safe distance
from the child’s reach. Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.
yThe speakers contain magnetic parts, so
colour irregularity may occur on the CRT TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.
Note
,
[Rear speakers]
Speaker Deco : This part of
speaker makes a no sound.
2
Connecting
Front left speaker (L)/ Front right speaker (R):
Place the front speakers to the sides of the monitor or screen and as ush with the screen surface as possible.
Center speaker:
Place the center speaker above or below the monitor or screen.
Surround left speaker (L)/ Surround right speaker (R):
Place these speakers behind your listening position, facing slightly inwards.
Subwoofer:
The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reections.
Unit
Connecting16
Speaker Connection
Attaching the speakers to the player
1. Connect speaker wires to the player. Each speaker wire is color-coded. Use matching
2
Connecting
color wires for corresponding speakers.
Color Speaker Position
Grey Rear Rear right
Blue Rear Rear left
Green Center Center
Orange
Red Front Front right
White Front Front left
2. Connect the speaker wire to the terminal on the speaker.
Make sure the wire marked black goes in to the
terminal marked “–” (minus) and the other wire goes in to the terminal marked “+” (plus).
Sub woofer
Any front position
Connecting 17
Connecting to Your TV
Make one of the following connections, depending on the capabilities of your existing equipment.
yHDMI connection (page 17)
yComponent Video connection (page 19)
yVideo connection (page 19)
Note
,
yDepending on your TV and other
equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.
yPlease refer to the manuals of your TV,
stereo system or other devices as necessary to make the best connections.
yMake sure the player is connected directly
to the TV. Tune the TV to the correct video input channel.
yDo not connect your player via your VCR.
The image could be distorted by the copy protection system.
HDMI Connection
If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.
Rear of the unit
HDMI
cable
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Additional Information for HDMI
TV
2
Connecting
yWhen you connect a HDMI or DVI compatible
device make sure of the following:
-Try switching o the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
-The connected device’s video input is set correctly for this unit.
-The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.
yNot all HDCP-compatible HDMI or DVI devices
will work with this player.
-The picture will not be displayed properly with non-HDCP device.
-This player does not playback and TV screen is changed to black screen.
Connecting18
Note
,
yIf a connected HDMI device does not accept
the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
yWhen you use HDMI connection, you can
change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 20.)
ySelect the type of video output from the
2
Connecting
HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 30).
yChanging the resolution when the
connection has already been established may result in malfunctions. To solve the problem, turn o the player and then turn it on again.
yWhen the HDMI connection with HDCP
is not veried, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.
yIf there are noises or lines on the screen,
please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)).
What is SIMPLINK?
Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power O, etc.
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
Note
,
Depending on the disc type or playing status, some SIMPLINK operation may dier from your purpose or not work.
Connecting 19
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using component video cable. You can hear the sound the through the system’s speaker.
Rear of the unit
Component
video cable
Video Connection
Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.
Rear of the unit
2
Connecting
Video cable
TV
TV
Note
,
When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 20.)
Connecting20
Resolution Setting
The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.
1. Press HOME (n).
2
Connecting
2. Use (b). The [Setup] menu appears.
3. Use press D to move to the second level.
4. Use then press ENTER (b) to move to the third level.
5. Use press ENTER (b) to conrm your selection.
yIf your TV does not accept the resolution
ySince several factors aect the resolution of
yWhen you set the HDMI Resolution, over
to select the [Setup] and press ENTER
A/D
to select [DISPLAY] option then
W/S
to select the [Resolution] option
W/S
to select the desired resolution then
W/S
Note
,
you have set on the player, you can set resolution to 480p as follows:
1. Press B to open the disc tray.
2 Press Z (STOP) for more than 5 seconds.
video output, see “Video Output Resolution” on page 58.
720p is not outputted to Composit Video.
Antenna connection
Connect the supplied antenna for listening to the radio.
Rear of the unit
Note
,
yTo prevent noise pickup. keep the AM Loop
antenna away from the unit and other components.
yAfter connecting the FM wire antenna, keep
it as horizontal as possible. Be sure to fully extend the FM wire antenna.
Loading...
+ 44 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use