OWNER’S MANUAL
3D Blu-ray™ / DVD
Home Cinema
System
Please read this manual carefully before operating your set and retain it for future reference.
LHB645 (LHB645, S65T1-S, S65S1-S, S65T1-C, S65T1-W) LHA745 (LHA745, S65T1-S, S65S1-S, S65T1-C, S65T1-W)
1 GettingStarted
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.
|
Getting Started |
3 |
||
|
|
|
|
|
This device is equipped with a portable battery or |
Disposal of waste batteries/accumulators |
|
||
accumulator. |
|
|
|
|
|
|
|
|
Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent
contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do
not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery should not be exposed to excessive heat such as sunshine, fire or the like.
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3.The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human health.
4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
1.When this crossed-out wheeled bin symbol is attached to batteries/ accumulators of Your product
it means they are covered by European Directive 2006/66/EC.
2.This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005% of mercury,0.002% of cadmium or 0.004% of lead.
3.All batteries/accumulators should be disposed separately from
the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
4.The correct disposal of Your old batteries/accumulators will help to prevent potential negative
consequences for the environment, animal and human health.
5.For more detailed information about disposal of Your old batteries/ accumulators, please contact Your city office, waste disposal service or the shop where You purchased the product.
1 GettingStarted
1 GettingStarted
4 Getting Started
Declaration of Conformity
Hereby, LG Electronics European Shared Service Center B.V., declares that this 3D BLU-RAY HOME CINEMA is compliant with the essential requirements and other relevant provisions of Directive 1999/5/EC. The complete Declaration of Conformity may be requested through the following postal address:
LG Electronics European Shared Service Center B.V.
European Standard Team
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website: http://www.lg.com/global/support/cedoc/cedoc#
This device is a 2.4 GHz wideband transmission system, intended for use in all EU member states and EFTA countries.
Getting Started |
5 |
|
|
Notes on copyrights
yy Because AACS (Advanced Access Content
System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected content. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
yy Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected content. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact an authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.
yy This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability.
Important Notice for TV colour system
The colour system of this player differs according to currently playing discs.
For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.
Only the multi system colour TV can receive all signals output from the player.
yy If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC.
yy The multi system colour TV changes the colour system automatically according to input signals. In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen.
yy Even if the disc recorded in NTSC colour system are well displayed on your TV, these may not be recorded correctly on your recorder.
>>Caution
yy Watching a 3D content for a long period time may cause dizziness or tiredness.
yy It is not recommended to watch a movie in 3D mode for infirm, child and pregnant woman.
yy If you are experiencing headache, tiredness or dizziness while viewing content in 3D,
it is strongly recommended to stop the playback and rest until you feel normal.
1 GettingStarted
6 Table of Contents
Table of Contents |
|
4 |
Operating |
||
|
|
32 |
Home Menu Display |
||
|
|
32 |
– Using [HOME] menu |
||
1 |
Getting Started |
33 |
Playing the Linked Devices |
||
33 |
– Playing a disc |
||||
2 |
Safety Information |
33 |
– Playing Blu-ray 3D disc |
||
34 |
– Playing a file on disc/USB device |
||||
8 |
Introduction |
||||
35 |
– Playing a file on android device |
||||
8 |
– Playable discs and symbols used in |
||||
36 |
– Playing a file on a network server |
||||
|
this manual |
||||
|
36 |
Using Home Network Server for PC |
|||
9 |
– About the “7” symbol display |
||||
36 |
– About SmartShare PC Software |
||||
9 |
– Regional code |
||||
36 |
– Downloading SmartShare PC |
||||
9 |
– System Select |
||||
|
|
Software |
|||
10 |
Remote Control |
|
|
||
36 |
– Installing SmartShare PC Software |
||||
11 |
Front Panel |
||||
37 |
– Sharing files and folders |
||||
11 |
Rear Panel |
||||
37 |
– System requirements |
||||
|
|
||||
2 |
Connecting |
38 |
General Playback |
||
38 |
– Basic operations for video and audio |
||||
|
|
|
|
content |
|
12 |
Positioning the System |
|
|
||
38 |
– Basic operations for photo content |
||||
13 |
Speaker Connection |
||||
38 |
– Using the disc menu |
||||
13 |
– Attaching the speakers to the player |
||||
39 |
– Resume playback |
||||
14 Connecting to Your TV |
|||||
39 |
– Last scene memory |
||||
15 |
– What is SIMPLINK? |
||||
40 |
On-Screen Display |
||||
15 |
– ARC (Audio Return Channel) function |
||||
40 |
– To control video playback |
||||
16 |
– Resolution setting |
||||
41 |
– To control photo view |
||||
17 |
Antenna Connection |
||||
42 |
Advanced Playback |
||||
17 Connections with External Device |
|||||
42 |
– Repeat playback |
||||
17 |
– AUX connection |
||||
42 |
– Repeating a specific portion |
||||
18 |
– OPTICAL IN connection |
||||
42 |
– Playing from selected time |
||||
19 Connecting to Your Home Network |
|||||
43 |
– Selecting a subtitle language |
||||
19 |
– Wired network connection |
||||
43 |
– Hearing a different audio |
||||
20 – Wired network setup |
|||||
43 |
– Watching from a different angle |
||||
|
|
||||
3 |
System Setting |
43 |
– Changing the TV Aspect Ratio |
||
44 |
– Changing Subtitle Code Page |
||||
|
|
44 |
– Changing the Picture Mode |
||
22 |
Initial Setup |
||||
45 |
– Viewing content information |
||||
23 |
Settings |
||||
45 |
– Changing content list view |
||||
23 |
– Adjust the setup settings |
||||
45 |
– Selecting a subtitle file |
||||
24 |
– [NETWORK] menu |
||||
46 |
– Listening to music during slide show |
||||
25 |
– [DISPLAY] menu |
||||
46 |
– Playing file encoded in 3D |
||||
26 |
– [LANGUAGE] menu |
||||
47 |
Advanced Features |
||||
27 |
– [AUDIO] menu |
||||
47 |
– Enjoying BD-Live™ |
||||
28 |
– [LOCK] menu |
||||
47 |
– LG AV Remote |
||||
29 |
– [OTHERS] menu |
||||
47 |
– Private Sound Mode |
||||
31 |
Sound Effect |
||||
48 |
Radio Operations |
||||
|
|
|
|
|
Table of Contents 7 |
|
|
|
|
|
|
48 |
– Listening to the radio |
64 |
Area Code List |
|
48 |
– Presetting the radio stations |
65 |
Language Code List |
|
48 |
– Deleting a saved station |
66 |
Trademarks and Licenses |
|
48 |
– Deleting all the saved stations |
68 |
Specifications |
|
48 |
– Improving poor FM reception |
70 |
Maintenance |
|
48 |
– See information about a radio station |
70 |
– Handling the unit |
|
49 |
Using BLUETOOTH® technology |
70 |
– Notes on discs |
|
49 |
– Listening to music stored on the |
71 |
Important Information relating to Network |
|
|
BLUETOOTH devices |
|
Services |
51LG Sound Sync
52Using the Premium
53Enjoying with LG Multi-room Audio (LG Music Flow)
5 Troubleshooting
54Troubleshooting
54– General
55– Network
56– Picture
56 – Sound
56 – Customer Support
56 – OPEN SOURCE SOFTWARE NOTICE
6 Appendix
57Controlling a TV with the Supplied Remote Control
57– Setting up the remote to control your TV
58Network Software Update
58 – Network update notification
58 – Software update
60Additional Information
60– File requirement
61– AVCHD (Advanced Video Codec High Definition)
62– About DLNA
62– Certain system requirements
62– Compatibility notes
63Audio Output Specifications
Some of the content in this manual may differ from your player depending on the software of the player or your service provider.
1
2
3
4
5
6
1 GettingStarted
8 Getting Started
Media/Term |
Logo |
Symbol |
Description |
||
|
|
|
|
|
|
|
|
|
|
yy Discs such as movies that can be purchased or |
|
|
|
|
e |
rented. |
|
|
|
|
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. |
||
Blu-ray |
|
|
|
yy BD-R/RE discs that are recorded in BDAV format. |
|
|
|
|
|
||
|
|
y |
yy BD-R/RE discs that contain Video, Audio or |
||
|
|
|
|||
|
|
|
u |
Photo files. |
|
|
|
|
i |
yy ISO 9660+JOLIET, UDF and UDF Bridge format |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
yy Discs such as movies that can be purchased or |
|
|
|
|
r |
rented. |
|
|
|
|
yy Video mode and finalized only |
||
DVD-ROM |
|
|
|
yy Supports the dual layer disc also |
|
DVD-R |
|
|
|
|
|
|
|
o |
Finalized AVCHD format |
||
DVD-RW |
|
|
|||
DVD+R |
|
|
|
|
|
|
|
y |
yy DVD±R/RW discs that contain Video, Audio or |
||
DVD+RW |
|
|
|||
|
|
|
u |
Photo files. |
|
|
|
|
yy ISO 9660+JOLIET, UDF and UDF Bridge format |
||
|
|
|
i |
|
|
|
|
|
|
|
|
DVD-RW (VR) |
|
|
r |
VR mode and finalized only |
|
|
|
|
|
|
|
Audio CD |
|
|
t |
Audio CD |
|
|
|
|
|
|
|
|
|
|
y |
yy CD-R/RW discs that contain Video, Audio or |
|
CD-R/RW |
|
|
u |
Photo files. |
|
|
|
|
i |
yy ISO 9660+JOLIET, UDF and UDF Bridge format |
|
|
|
|
|
||
|
|
|
|
||
|
|
|
|
|
|
Note |
– |
, |
Indicates special notes and operating features. |
||
|
|||||
|
|
||||
|
|
|
|
|
|
Caution |
– |
> |
Indicates cautions for preventing possible damages |
||
from abuse. |
|||||
|
|
|
|||
|
|
|
|
|
Getting Started |
9 |
|
|
,,Note
yy Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
yy If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)
yy This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback.
yy Customers should note that permission is required in order to download MP3 / WMA files and audio from the Internet.
Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
yy You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting
the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)
“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.
This unit has a regional code printed on the unit. This unit can play only BD-ROM or DVD discs labeled same as the unit or “ALL”.
You must select the appropriate system mode for your TV system. Open the disc tray using the B (OPEN/CLOSE) button and then, press and hold M (PAUSE) for more than five seconds to be able to select a system (PAL, NTSC, AUTO)
1 GettingStarted
1 GettingStarted
10 Getting Started
F UNCTION
INFO/M ENU
Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 4and 5matched correctly.
• • • • • • A• • • |
• |
FUNCTION: Changes input mode.
SUBTITLE: Selects a subtitle language.
1(POWER): Switches the player ON or OFF.
B(OPEN/CLOSE): Ejects a disc.
SLEEP: Sets a certain period of time after which the unit will switch to off.
INFO/MENU (m): Displays or exits On-Screen Display.
HOME (): Displays or exits the [Home Menu].
DISC MENU: Accesses menu on a disc.
• • • • • • B• • • |
• |
Direction buttons (W/S/A/D):
Selects an option in the menu.
PRESET +/-: Selects programme of Radio.
TUNING +/-: Tunes in the desired radio station.
ENTER (b): Acknowledges menu selection.
BACK (): Exits the menu or returns to the previous screen.
TITLE/POPUP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.
Z(STOP): Stops playback. z(PLAY): Starts playback.
M(PAUSE/STEP): Pauses playback.
C/V(SKIP): Goes to the next or previous chapter / track / file.
c/v(SCAN): Searches backward or forward.
• • • • • • C• • • |
• |
SPEAKER LEVEL: Sets the sound level of desired speaker.
SOUND EFFECT: Selects a sound effect mode.
VOL +/-: Adjusts speaker volume.
OPTICAL/ TV SOUND : Changes input mode to optical directly.
MUTE: Mute the unit.
Colored (R, G, Y, B) buttons:
-Use to navigate BD-ROM menus. They are also used as shortcut buttons for specific menus.
-B button: Selects mono/ stereo in FM mode.
RDS: Radio Data System.
PTY: Views the programme type of the RDS.
PTY SEARCH:
Searches programme type.
0-9 numerical buttons: Selects numbered options in a menu.
CLEAR: Removes a mark on the search menu or a number when setting the password.
REPEAT (h): Repeats a desired section or sequence.
AUDIO: Selects an audio language or audio channel.
?: Marked button is not available.
• • • • • • D• • • |
• |
TV Control Buttons: See page 57.
Getting Started 11
A |
B |
C |
1 |
|
|
|
|
D |
|
|
<![if ! IE]> <![endif]>Started Getting |
|
|
|
|
A Disc Tray |
D USB Port |
|
|
BDisplay Window
COperation buttons R(Open / Close) T(Play / Pause) I(Stop)
F (Function)
Changes the input source or function.
-/+ (Volume) 1/!(Power)
A B C D E F G H
A AC power cord |
F AUX (L/R) INPUT |
B Cooling Fan |
G OPTICAL IN |
C Speakers connectors |
H Antenna Connector |
D LAN port |
|
E HDMI OUT TO TV |
|
2
<![if ! IE]><![endif]>Connecting
The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes.
For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A).
B
C
A G
F
A A
A
A E
D A
AFront left speaker (L)/ BFront right speaker (R):
Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible.
CCenter:
Place the Center above or below the monitor or screen.
DSurround left speaker (L)/ ESurround right speaker (R):
Place these speakers behind your listening position, facing slightly inwards.
FSubwoofer:
The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections.
GUnit
>>Caution
yy Be careful to make sure children not to put their hands or any objects into the *speaker duct.
*Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure).
yy Place the Center at a safe distance from the child’s reach.
Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.
yy The speakers contain magnetic parts, so colour irregularity may occur on the CRT TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.
yy Before using the subwoofer, remove the protective vinyl.
yy Be careful not to make scratches on the surface of the Unit /Sub-Woofer when installing or moving them
Connecting 13
1.Connect the wires to the unit.
Match each wire’s colored band (or marking) to the same colored (or marked) connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad
to open the connection terminal. Insert the wire and release the finger pad.
Connect the black stripe of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus).
Connect a woofer cord to the player. When connecting a woofer cord to the player, insert the connector until it clicks.
2.In some cases, the wires need to be connected to the speakers.
Connect the other end of each wire to the correct speaker according to the color coding or marking:
Color |
Speaker |
Position |
|
|
|
|
|
Grey (R.R/L) |
Rear |
Rear right |
|
|
|
|
|
Blue (R.R/L) |
Rear |
Rear left |
|
|
|
|
|
Green (C) |
Center |
Center |
|
|
|
|
|
Orange |
Sub |
Any front position |
|
woofer |
|||
|
|
||
|
|
|
|
Red (F.R/L) |
Front |
Front right |
|
|
|
|
|
White (F.R/L) |
Front |
Front left |
|
|
|
|
To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on the base of each speaker. Insert the wire and release the finger pad.
>>Caution
yy Be careful to make sure children do not put their hands or any objects into the *speaker duct.
*Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).
yy The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor.
2
<![if ! IE]><![endif]>Connecting
2
<![if ! IE]><![endif]>Connecting
14 Connecting
If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.
Rear of the unit
HDMI cable
TV
,,Note
yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution setting” on page 16 )
yy Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Settings] menu (see page 26).
yy Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
yy When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)).
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible device make sure of the following:
-- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
-- The connected device’s video input is set correctly for this unit.
-- The connected device is compatible with 720 x 576p, 1280 x 720p, 1920 x 1080i or 1920 x 1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices will work with this player.
-- The picture will not be displayed properly with non-HDCP device.
Connecting 15
Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
,,Note
Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work.
The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of this player.
To use this function:
-- Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On.
-- The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, refer to your TV manual.
-- You must use the HDMI cable (Type A, High Speed HDMI™ cable with Ethernet).
-- You must connect with the HDMI IN that supports the ARC function using the HDMI OUT on this player.
-- You can connect only one Home Theater to TV compatible with ARC.
,,Note
To activate [SIMPLINK / ARC] function, set this option to [On]. (page 30)
2
<![if ! IE]><![endif]>Connecting
2
<![if ! IE]><![endif]>Connecting
16 Connecting
The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Settings] menu.
1.Press HOME ().
2.Use A/Dto select the [Settings] and press ENTER (b). The [Settings] menu appears.
3.Use W/Sto select [DISPLAY] option then press Dto move to the second level.
4.Use W/Sto select the [Resolution] option then press ENTER (b) to move to the third level.
5.Use W/Sto select the desired resolution then press ENTER (b) to confirm your selection.
,,Note
yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows:
1. Press Bto open the disc tray.
2 Press Z(STOP) for more than 5 seconds.
yy If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].
yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change,
if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.
yy The 1080p video output frame rate may be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and
based on the native video frame rate of the content on the BD-ROM disc.
|
|
Connecting 17 |
|
|
|
|
|
Antenna Connection |
Connections with |
||
Connect the supplied antenna for listening to the |
External Device |
||
radio. |
|
|
|
|
|
AUX connection |
|
|
|
||
|
|
You can enjoy the sound from an external |
|
|
|
component through the speakers of this system. |
|
|
|
Connect the analog audio output jacks of your |
|
|
|
||
|
|
component into the AUX L/R (INPUT) on this unit. |
|
|
|
And then select the [AUX] option by pressing |
|
|
|
FUNCTION. |
|
|
|
You can also use the F (Function) button on the |
|
Rear of the unit |
front panel to select the input mode. |
||
|
|
Rear of the unit
,,Note
Be sure to fully extend the FM wire antenna.
Red
White
To the audio output jacks of your component (TV, VCR, etc.)
2
<![if ! IE]><![endif]>Connecting
18 Connecting
You can enjoy the sound from your component with a digital optical connection through the speakers of this system.
Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing FUNCTION. Or press OPTICAL / TV SOUND to select directly.
2You can also use the F (Function) button on the front panel to select the input mode.
<![endif]>Connecting
Rear of the unit
To the digital optical output jack of your component
Connecting 19
This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live interactivity and online content services.
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Please refer to the documentation for your network device for further instructions.
Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.
yy Do not connect a modular phone cable to the LAN port.
yy Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider.
yy If you want to access content from DLNAcompatible digital media servers, this player must be connected to the same local area network with them via a router.
yy To set your PC as a DLNA-compatible digital media server, install the SmartShare PC Software on your PC. (page 36)
Broadband service
Router 2
<![if ! IE]><![endif]>Connecting
DLNA certified servers
Rear of the unit
2
<![if ! IE]><![endif]>Connecting
20 Connecting
If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to connect the broadband internet to your home network.
1.Select [Connection Setting] option in the [Settings] menu then press ENTER (b).
2.Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
Network will automatically be connected to the unit.
Advanced Setting
If you want to set the network settings manually, use W/Sto select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
,,Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
2.Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
3.Press ENTER (b) while [OK] is highlighted to finish the wired network settings.
Connecting 21
Notes on network connection
yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home
network router or cable modem. Then power on and/or connect the power cable again.
yy Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.
yy Our company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.
yy The features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.
yy Some internet content may require a higher bandwidth connection.
yy Even if the player is properly connected and configured, some internet content may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.
yy Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.
yy Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)
2
<![if ! IE]><![endif]>Connecting
3
<![if ! IE]><![endif]>Setting System
Initial Setup |
4. |
Select [Next] and press ENTER (b). |
|
||
|
5. |
Press ENTER (b) to verify the test tone signals of |
the speakers.
When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language and network settings on the initial setup wizard.
1.Press 1(POWER).
The initial setup wizard appears on the screen.
2.Use W/S/A/Dto select a display language
and press ENTER (b). |
After verifying the test tone signals, press ENTER |
|
|
(b) while [Stop] is highlighted. |
|
|
Select [Next] and press ENTER (b). |
|
|
6. You can listen to TV sound through HTS Speaker |
|
|
automatically when TV is turned on. |
|
3. After checking the Terms of Service, select |
|
|
[Agree] to use the Premium Service and SW |
|
|
Updates. |
|
|
Read and prepare the preparations for the |
|
|
network settings and then press ENTER (b) |
Press Wto move and press A/Dto select [On] |
|
while [Start] is highlighted. |
||
or [Off ]. Select [Next] and press ENTER (b). |
||
|
||
|
7. Check all the settings that you have set in the |
|
|
previous steps. |
|
If wired network is connected, the network |
|
|
connection setting will automatically be |
|
|
finished. |
Press ENTER (b) while [Finish] is highlighted |
|
|
||
|
to finish the initial setup settings. If there is any |
|
|
settings to be changed, use W/S/A/Dto |
|
|
select 1and press ENTER (b). |
|
|
8. Displays private sound mode guide. Press ENTER |
|
|
(b). |