is a trademark of Verizon
Wireless. All other trademarks are the property of their
respective owners.
Important Safety Precautions
Read these instructions. Breaking the rules may be dangerous or illegal.
Further detailed information is given in this user guide.
Violation of the instructions may cause serious injury or death.
●
Never use an unapproved battery since this could damage
the phone and/or the battery and could cause the
battery to explode.
●
Never place your phone in a microwave oven as it will
cause the battery to explode.
●
Never store your phone in temperatures lower than
-4°F or higher than 122°F.
●
Do not dispose of your battery near fire or with
hazardous or flammable materials.
●
When riding in a car, do not leave your phone or set up
the hands-free kit near the air bag. If wireless equipment
is improperly installed and the air bag is deployed, you
may be seriously injured.
●
Do not use a hand-held phone while driving.
●
Do not use the phone in areas where its use is prohibited.
(For example: aircraft)
1
Important Safety Precautions
●
Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as a
bathroom.
●
Do not use harsh chemicals (such as alcohol, benzene,
thinner, etc.) or detergent to clean your phone. This could
cause a fire.
●
Do not drop, strike, or shake your phone severely. It may
harm the internal circuit boards of the phone.
●
Do not use your phone in highly explosive areas as the
phone may generate sparks.
●
Do not damage the power cord by bending, twisting,
pulling, or heating. Do not use the plug if it is loose as it
may cause electric shock or fire.
●
Do not place any heavy items on the power cord. Do not
allow the power cord to be crimped as it may cause
electric shock or fire.
●
Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock or seriously
damage your phone.
●
Do not disassemble the phone.
2
●
Do not place or answer calls while charging the phone as
it may short-circuit the phone and/or cause electric shock
or fire.
●
Make sure that no sharp-edged items, such as animal’s
teeth or nails, come into contact with the battery. This
could cause a fire.
●
Store the battery out of reach of children.
●
Be careful that children do not swallow any parts (such as
earphone, connection parts of the phone, etc). This could
cause asphyxiation or suffocation resulting in serious
injury or death.
●
Unplug the power cord and charger during lightning
storms to avoid electric shock or fire.
●
Only use the batteries and chargers provided by LG. The
warranty will not be applied to products provided by
other suppliers.
●
Only authorized personnel should service the phone and
its accessories. Faulty installation or service may result in
accidents and consequently invalidate the warranty.
●
Your service provider programs one or more emergency
phone numbers, such as 911, that you can call under any
circumstance, even when your phone is locked. Your
phone’s preprogrammed emergency number(s) may not
work in all locations, and sometimes an emergency call
cannot be placed due to network, environmental, or
interference issues.
FCC Hearing-Aid Compatibility
(HAC) Regulations for
Wireless Devices . . . . . . . . . . . .142
Accessories . . . . . . . . . . . . .145
LIMITED WARRANTY
STATEMENT . . . . . . . . . . . .146
Glossary . . . . . . . . . . . . . . . .149
Terminology . . . . . . . . . . . . . .149
Acronyms and Abbreviations .149
Index . . . . . . . . . . . . . . . . . . .151
8
Welcome
Thank you for choosing the
enV®3
cellular phone designed to operate
with the latest digital mobile
communication technology, Code
Division Multiple Access (CDMA).
Along with the many advanced
features of the CDMA system, such
as greatly enhanced voice clarity,
this compact phone offers:
●
V CAST Music with Rhapsody
●
V CAST Video
●
Mobile IM.
●
VZ Navigator.
●
Mobile Email.
●
54-key internal keypad.
●
21-key external keypad and
screen with auto screen lock.
●
Customizable display themes
and screensavers.
●
Built-in 3.0 Megapixel digital
camera.
●
External easy-to-read 5-line LCD
screen with status icons.
●
Internal, easy-to-read, 8-line
backlit LCD with status icons.
●
Paging, messaging, voicemail,
and caller ID.
●
Dashboard with Mobile Web.
●
HTML Web Browser
●
Media Center.
●
Long battery standby and talk
time.
●
Any key answer, auto answer
with hands-free accessories,
auto retry, one-touch and speed
dialing with 999 memory
locations.
●
Bilingual (English and Spanish)
capability.
●
Bluetooth®wireless technology.
NOTE
The Bluetooth®word mark and
logos are owned by the
Bluetooth SIG, Inc. and any use
of such marks by LG Electronics
is under license. Other
trademarks and trade names are
those of their respective owners.
TIP
Find the interactive user guide on the
web for your convenience where you
can freely surf and interactively learn
how to use your phone step-by-step.
1. Go to
http://www.verizonwireless.com
2. Hover over the Support tab, click on
Phones & Devices.
3. Select LG from the Phone/Device
brand drop- down menu.
4. Click on the Link for this model.
5. Click on Equipment Guide to start
the interactive Guide.
9
Technical Details
Important Information
This user’s guide provides
important information on the use
and operation of your phone.
Please read this guide carefully
prior to using the phone to be
able to use your phone to its
greatest advantage and to prevent
any accidental damage or misuse.
Any unapproved changes or
modifications will void your
warranty.
Technical Details
The
enV®3
is an all digital phone
that operates on both Code
Division Multiple Access (CDMA)
frequencies: cellular services at
800 MHz and Personal
Communication Services (PCS) at
1.9 GHz.
CDMA technology uses a feature
called DSSS (Direct Sequence
Spread Spectrum) that enables the
phone to keep communication
from being crossed and to use one
frequency channel by multiple
users in the same specific area.
This results in a 10-fold capacity
increase when compared with
analog mode. In addition, features
such as soft/softer handoff, hard
handoff, and dynamic RF power
control technologies combine to
reduce call interruptions.
The Cellular and PCS CDMA
networks consist of MSO (Mobile
Switching Office), BSC (Base
Station Controller), BTS (Base
Station Transmission System), and
MS (Mobile Station).
1xRTT system receives twice as
many subscribers in the wireless
section as IS-95. Its battery life is
twice as long as IS-95. High-speed
data transmission is also possible.
EV-DO system is optimized for
data service and is much faster
than 1xRTT system in applicable
area.
The table on the following page
lists some major CDMA standards.
FCC RF Exposure Information
WARNING! Read this information
before operating the phone.
In August 1996, the Federal
Communications Commission (FCC)
of the United States, with its action
in Report and Order FCC 96-326,
adopted an updated safety standard
for human exposure to Radio
Frequency (RF) electromagnetic
energy emitted by FCC regulated
transmitters. Those guidelines are
consistent with the safety standard
previously set by both U.S. and
international standards bodies. The
design of this phone complies with
the FCC guidelines and these
international standards.
CDMA Dual-Mode Air Interface
14.4kbps Radio Link Protocol and
Inter-Band Operations
IS-95 Adapted for PCS Frequency Band
CDMA2000 1xRTT Air Interface
MAS-BS
PCSC-RS
Intersystem Operations
Non-Signaling Data Communications.
Speech CODEC
Short Message Service
Packet Data
Position Determination Service (gpsOne)
High Speed Packet Data
CDMA2000 High Rate Packet Data Air Interface
1x EV-DO Inter-Operability Specification for HRPD
Access Network Interfaces
Recommended Minimum Performance Standards for
HRPD High Rate Packet Data Access Terminal
Test Application Specification (TAS) for High Rate
Packet Data Air Interface
Bodily Contact During Operation
This device was tested for typical
use with the back of the phone
kept 0.79 inches (2.0 cm) from
the body. To comply with FCC RF
exposure requirements, a minimum
separation distance of 0.79 inches
(2.0 cm) must be maintained
between the user’s body and the
back of the phone, including the
antenna, whether extended or
11
Technical Details
retracted. Third-party belt-clips,
holsters, and similar accessories
containing metallic components
should not be used. Avoid the use
of accessories that cannot maintain
0.79 inches (2.0 cm) distance
between the user’s body and the
back of the phone and have not
been tested for compliance with
FCC RF exposure limits.
Vehicle-Mounted External
Antenna
(Optional, if available.)
To satisfy FCC RF exposure
requirements, keep 8 inches (20
cm) between the user / bystander
and vehicle-mounted external
antenna. For more information
about RF exposure, visit the FCC
website at www.fcc.gov.
FCC Notice and Cautions
This device and its accessories
comply with part 15 of FCC rules.
Operation is subject to the
following two conditions: (1) This
device and its accessories may not
cause harmful interference, and (2)
this device and its accessories must
accept any interference received,
including interference that causes
undesired operation.
Any changes or modifications not
expressly approved in this user
guide could void your warranty for
this equipment. Use only the
supplied antenna. Use of
unauthorized antennas (or
modifications to the antenna) could
impair call quality, damage the
phone, void your warranty and/or
violate FCC regulations.
Don't use the phone with a
damaged antenna. A damaged
antenna could cause a minor skin
burn. Contact your local dealer for a
replacement antenna.
12
Part 15.105 statement
This equipment has been tested
and found to comply with the
limits for a class B digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and,
if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
interference will not occur in a
particular installation. if this
equipment does cause harmful
interference or television reception,
which can be determined by
turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between
the equipment and receiver.
- Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
- Consult the dealer or an
experienced radio/TV technician
for help.
13
Phone Overview
1. Earpiece
2. CONTACTS Key
15 . Ca m e ra L en s
14 . E x te rna l LC D
Screen
13. Headset Jack
3. Camera Key
4. Volume Keys
5. SEND Key
6. Accessory/ Charger Port
1. Earpiece Lets you hear the caller.
2. CONTACTS Key Use to access the Contact List.
3. Camera Key Use for quick access to Camera
function.
4. Vol ume Keys Use to adjust the Master Volume in
standby mode* and the Earpiece Volume during a
call.
5. SEND Key Use to make and answer calls.
6. Accessory/ Charger Port Connects the phone to
the battery charger, or other compatible accessory.
7. Alphanumeric keypad Use to enter numbers and
characters and select menu items
8. Vibrate Mode Key From standby mode*, press and
hold for about 3 seconds to activate Vibrate Mode.
™
9. microSD
Slot Accommodates an optional
™
microSD
card.
10. OK Key/ Directional Keys
screen, access the Menu, and accept entered or
highlighted information. Use for quick, convenient
navigation. From standby mode, access My Music
(by pressing Up), My Pictures (Left), Messaging
(Down), and the Bluetooth Menu (Right). You can
view more information on page 27. When navigating
menus, use the Directional Keys to scroll to choices
and settings.
Use to unlock the
12 . C L R K ey / Vo i ce
Commands Key
11. PWR/END Key
10. OK Key/ Directional Keys
™
Slot
9. microSD
8. Vibrate Mode Key
7. Alphanumeric keypad
11. PWR/END Key Use to turn the power on/off and
to end a call. Also returns to standby mode.*
12. CLR Key / Voice Commands Key Deletes single
spaces or characters with a quick touch, but press
and hold to delete entire words. Also backs out of
menus, one level at a time. In standby mode*,
simply press the key to start Voice Commands or
press and hold to start recording a new sound.
13. Headset Jack Allows you to plug in an optional
headset for convenient, hands-free conversations.
Plug headset into the 2.5mm jack located at the
top right corner of the device.
14. External LCD Screen Allows you to view incoming
calls, messages and icons indicators as well as a
wide variety of content you select for viewing.
15. Camera Lens Used for taking pictures and
recording video. Keep it clean for optimal photo
quality.
* Standby mode is when the phone is waiting for input from you. No
menu is displayed and the phone isn’t performing any action. It’s the
starting point for all of the instruction steps.
Note: This User Manual gives navigation instructions according to the
default "Grid" Menu Layout in the Display Settings menu. If other
themes or menus are set, navigating the phone's menus may be
different.
14
19 . S pe a ke rs
1. Left Soft Key
2. FAVORITES Key
3. Message Key
4. Shift Key
5. Sym Key
6. Game Directional
Keys
1. Left Soft Key
2. FAVO RITES Key Add up to 10 favorite contacts or
3. Message Key Use for quick access to New TXT
4. Shift Key Use to change letter case when typing.
5. Sym Key Use to insert symbols (displayed at the
6. Game Directional Keys Use for game navigation.
7. Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
8. Space/ Voice Commands Key Use to enter a
9. Return Key Moves cursor to the next line.
10. CLR Key Press to delete a single space or
Use to access Message menu when in
Standby mode, or other function displayed at the
bottom left of the LCD.
groups as Favorites, so you can easily make calls,
send messages, and review messages.
Message.
top of designated keys) into your text.
space while editing. TTS (Text to Speech) function
is available with in Messaging Inbox, and
Notepad. Use to activate Voice Commands in
standby mode.
character, or press and hold to delete a specific
word plus its space. Press once in a menu to go
back one level.
7. Alphanumeric
Keyp ad
18. Light Sensor
17. LCD Screen
16. Right Soft Key
15 . SE N D Ke y
14. PWR/END Key
13. OK Key
12. Directional Keys
11. Speakerphone Key
10 . C LR Ke y
8. Space/ Voice
Commands Key
11. Speakerphone Key Use to activate Speakerphone
Mode.
12. Directional Keys Use for quick, convenient
navigation. From standby mode, access Mobile
Web, My Account, Calendar, and My Shortcuts
(you can change any of these to other menus in
the Settings menu). In menus use to scroll to
choices and settings.
13. OK Key Use to activate a selected screen item.
14. PWR/END Key Use to turn the power on/off and
to end a call. Use to return to standby mode.
15. SEND Key Use to make or answer calls.
16. Right Soft Key Use to access the Contact List
when in Standby mode, or select the option
displayed at the bottom right of the LCD.
17. LCD Screen Displays incoming calls, messages and
indicator icons as well as a wide variety of content
you select to view.
18. Light Sensor Automatically adjusts the brightness
of the main LCD to disable this sensor and set the
brightness to a fixed level, use the Brightness
submenu in the Display menu.
19. Speakers Lets you hear the caller's voice, music
and video in speakerphone mode.
9. Return Key
15
Entering and Editing Information
From the Internal Qwerty Keypad
When creating a Text, Picture or Video message using the inside LCD, use
the Qwerty keypad.
Press this key to access your Favorite
contacts list. From here you can
easily make calls, send and view
messages.
Use to enter
letters.
Press this key first and then any
key with a symbol on it to
insert that symbol in your
message.
Use to insert a
space between a
letter, words and
sentences.
16
Use the arrow keys to go to next field
such as recipient address, text, picture
and video depending on the message
types. Use the Key to send a
message when finished.
Use to enter numbers.
Use to go to next
line editing your
message.
Use to delete a letter,
words or sentences. Also
use it to exit the menu and
go back to standby mode.
My Ringt
My Ringt
MeMessaging
oness
one
ssaging
1. New Message
1. TXT message
2. Picture
Message
3. Video message
4. Voice message
2. Messages
3. Drafts
4. Voicemail
5. Visual Voice Mail
6. Mobile IM
7. Email
8. Chat
9. Blogs
Menu Tree on the Internal Screen
4. My Music
5. My Sounds
ecent Calls
RRecent Calls
1. Missed
2. Received
3. Dialed
4. All
5. View Timers
ont
actss
CCont
act
1. New Contact
2. Contact List
3. Backup Assistant
4. Favorites
5. Groups
6. Speed Dials
7. In Case of
Emergency
8. My Name Card
6. Sync Music
2. Picture & Video
1. V CAST Videos
2. Get New
Pictures
3. My Pictures
4. My Videos
5. Take Picture
6. Record Video
7. Online Album
3. Games
1. Get New
Applications
4. Dashboard /
Mobile Web
5. Browse &
Download
6. Extras
Email
Email
Media C
Media C
enterer
ent
1. Music & Tones
1. V CAST Music |
Rhapsody
2. Get New
Ringtones
3. My Ringtones
VZ Na
VZ Na
vigattoror
viga
17
Menu Tree on the Internal Screen
Caller ID
3.
Announcement
Mobile IM
Mobile IM
tings & T
SeSetttings & T
1. My Verizon
2. Tools
1. Voice
Commands
2. Calculator
3. Ez Tip
Calculator
4. Calendar
5. Alarm Clock
6. Stopwatch
7. World Clock
8. Notepad
9. USB Mass
Storage
3. Bluetooth Menu
1. Add New
Device
4. Sounds Settings
1. Easy Set-up
2. Master Volume
3. Call Sounds
1.Call
Ringtone
2.Call Vibrate
ools
ools
4. Alert Sounds
1.TXT
Message
2.Multimedia
Message
3.Voicemail
4.Emergency
Tone
5.Missed Call
5. Keypad Volume
6. Digit Dial
Readout
7. Service Alerts
1.ERI
2.Minute Beep
3.Call Connect
4.Charge
Complete
8. Power On/Off
1.Power On
2.Power Off
9. Voice Clarity
5. Display Settings
1. Easy Set-up
2. Banner
1.Personal
Banner
2.ERI Banner
3. Backlight
1.Internal
Backlight
2.External
Backlight
3.Keypad
Backlight
4. Brightness
1.Auto
Brightness
2.Brightness
Level
5. Wallpaper
1.Internal
Wallpaper
2.External
Wallpaper
6. Charging
Screen
7. Display
Themes
1.Internal
Themes
2.External
Themes
8. Main Menu
Settings
1.Menu Layout
2.Replace
Menu Items
3.Position
Menu Items
4.Reset Menu
Settings
9. Font Size
Menu Font Type
10 .
11. Clock Format
18
6. Phone Settings
1. Airplane Mode
2. Set Shortcuts
1.Set my
Shortcuts
2.Set
Directional
Keys
3.Set Qwerty
Shortcut
3. Voice
Commands
1.Confirm
Choices
2.Sensitivity
3.Adapt Voice
4.Prompts
5.CLR Key
Activation
4. Language
5. Location
6. Current
Country
7. Security
1.Edit Codes
2.Restrictions
3.Phone Lock
4.Lock Phone
Now
5.Reset Default
6.Restore
Phone
8. System Select
9. NAM Select
7. Call Settings
1. Answer
Options
2. End Call
Options
3. Auto Retry
4. TTY Mode
5. One Touch Dial
6. Voice Privacy
7. DTMF Tones
8. Assisted Dialing
8. USB Mode
9. Memory
1. Save Options
2. Phone Memory
3. Card Memory
10. Phone Info
1. My Number
2. SW/HW
Version
3. Icon Glossary
4. Software
Update
11. Set-up Wizard
NOTE
Keyguard Settings
is available on the
External display.
1. Press to unlock
2. Press MENU
3. Scroll to KEYGUARD and press
4. Select Keyguard Timer:
Always Off/ 7 Seconds/
15 Seconds/ 30 Seconds
or Unlock Options:
Press Once/ Press Twice
19
Getting Started with Your Phone
The Battery
NOTE
It is important to fully charge the
battery before initial use of the phone.
The phone comes with a
rechargeable battery. Keep the
battery charged while not in use in
order to maximize talk and standby
time. The battery charge level is
shown at the top of the LCD
screen.
Installing the Battery
To install the battery, insert the top
edge (opposite the battery
terminals) of the battery into the
opening on the back of the phone.
Push the battery down until it clicks
into place.
Removing the Battery
Turn power off. Slide the battery
release latch away from the edge of
the battery, then lift the edge of
the battery to remove it.
Charging the Battery
Your enV®3 device comes with a
cableless travel adapter and a USB
data cable which are connected
together to charge your phone. To
charge your phone:
NOTICE
Please use only an approved charging
accessory to charge your LG phone.
Improper handling of the charging port, as
well as the use of an incompatible charger,
may cause damage to your phone and
void the warranty.
20
1. Connect the cableless wall
adapter and USB data cable.
When connecting as shown
below, the LG logo on the USB
cable should face toward you.
2. Gently uncover the accessory
charging port, then plug the end
of the AC adapter into the
phone’s charger port and the
other end into an electrical
outlet.
NOTICE
Please make sure that the
'B' Side faces up before
inserting a charger or data cable into
the charger port of your phone.
3. The charge time varies
depending upon the battery
level.
Charging with USB
You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
need to have the necessary USB
drivers installed on your PC first.
Connect one end of the USB cable
to the charging accessory port on
your phone and the other end to a
highpower USB port on your PC
(commonly located on the front
panel of the computer). It is best to
use the rear USB port when
connecting to a desktop PC. A USB
Hub should be powered by an
external power source (see Note
below).
●
NOTE
Low-power USB ports are not
supported, such as the USB
port on your keyboard or buspowered USB hub.
●
LG USB Driver is downloadable
from the following site:
http://www.lgmobilephones.com
> Click SUPPORT > Select a
Carrier(Verizon) > Select a
Model > Click USB Cable Driver
to download.
21
Getting Started with Your Phone
How to Install Your microSD
™
Card
1. Locate the microSD™slot on the
right side of the phone and
gently uncover the slot opening
™
(microSD
attached to the phone so you
don't lose it).
2. Insert the microSD
up and push until it clicks into
the slot. If you insert the card in
the wrong direction, it may
damage your phone or your
card.
slot cover stays
™
card facing
How to Remove Your
microSD™Card
1. Push the card in to release the
exposed edge of the microSD
card to eject it.
™
2. Remove the microSD
the slot and replace the cover.
G
NOTE
Do not attempt to remove the
™
microSD
writing to the card.
G
Users wishing to transfer or
download music onto a
™
MicroSD
phone (through either MTP Sync
or Over the Air) should format
the MicroSD
handset before using it
through(Menu -> Settings &
Tools -> Memory -> Card
Memory -> Options -> Format).
Warning: Formatting the
™
MicroSD
contents on the card. In the
event the MicroSD
on this phone without first
formatting it, the phone will
display a “License acquisition
failed” during OTA downloading
or MTP Sync. Song files
downloaded or otherwise
purchased from third party
providers and stored on a
™
MicroSD
device may be protected or
encrypted by such provider and
cannot be played on this device.
card from
card while reading or
card inserted into this
™
card on this
card will erase all
™
card is used
card inserted into this
™
22
Battery Temperature
Protection
Though extremely rare, if the
battery becomes overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.
Battery Charge Level
You can find the battery charge
level at the top right of the LCD
screen. When the charge level
becomes low, the battery sensor
sounds a warning tone, blinks the
battery icon, and displays a warning
message. As the charge level
approaches empty, the phone
automatically switches off without
saving.
Turning the Phone On and
Off
Turning the Phone On
Using the Internal Keypad
1. Install a charged battery or
connect the phone to external
power source.
2. Open the flip and press
for a few seconds until the LCD
screen lights up.
Using the External Power Key
1. Install a charged battery or
connect the phone to external
power source.
2. Press for a few seconds
until the LCD screen lights up.
Turning the Phone Off
Using the Internal Keypad
1. Press and hold until the
display turns off.
Using the External Power Key
1. Unlock the screen by pressing
once or twice.
2.
Press and hold until the
display turns off.
23
Getting Started with Your Phone
Signal Strength
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon: the more bars,
the stronger the signal. If you’re
having problems with signal quality,
move to an open area or, when
inside a building, try moving
towards a nearby window.
Screen Icons
When the phone is on, the top line
of the LCD screen displays phone
status icons.
Using the Internal Keypad
To see the icon glossary, go to
MENUSettings & Tools
Phone InfoIcon Glossary
your phone.
on
Making Calls
Make sure the phone is turned on.
If necessary, enter the lock code.
NOTE
To activate the speakerphone
during a call, simply open the flip.
Using the External Keypad
1. Unlock the screen by pressing
once or twice.
2. Enter the phone number (include
the area code, if needed).
3. Press the key.
4. Press the key to end the
call.
Using the Internal Keypad
1. Open the flip and enter the
phone number (include the area
code, if needed).
2. Press the key.
Press the key to end the call.
3.
Correcting Dialing Mistakes
If you make a mistake while dialing
a number, press once to erase
the last digit entered, or hold down
for at least 2 seconds to
delete all digits. When using
external keypad, use
.
24
Redialing Calls
[Q uiet]
[I gnore]
Press and hold the external
key or the internal key to
redial the last number you dialed,
received or missed in call history.
The last 270 numbers are stored in
the call history list and you can
select any of these to redial.
Receiving Calls
Using the External Keypad
1. When the phone rings or vibrates,
press the key.
Press the key to end the call.
2.
NOTE
Simply press the key to
immediately silence the ringtone
or vibration for that call. Or, you
can press the key twice, then
select Quiet. (1 = Unlock, 2 =
Options, and 3 = Quiet).
NOTE
To ignore the incoming call, press
the key twice to
immediately end the call. Or, you
can press the key twice, then
select Ignore.
Using the Internal Keypad
1. There are several ways of
answering a call, depending on
your selected Answer Options
(for instructions on how to set
your preferences, see page 110):
●
Flip Open
●
Any Key
: Open the flip.
: Press the
with the phone unlocked, press
any other key except the
key
.
●
Auto with Handsfree
: The call
automatically connects when
connected to a handsfree
device.
●
SEND Key only
: If none of the
Answer Option boxes are
checked, only the SEND Key will
answer a call.
NOTE
If you press the Left Soft Key
while the phone is ringing
and the flip is open, the ringing or
vibration is muted for that call.
NOTE
If you press the Right Soft Key
while the phone is ringing
and the flip is open, the call will end
or go to voicemail.
NOTE
If you press while the phone is
ringing and the flip is already open,
the call will end and will be able to
select a Quick Text to send to the
caller.
key
or,
25
Quick Access to Convenient Features
Vibrate Mode
Sets the phone to vibrate instead
of ring (is displayed on the
Status bar). To set Vibrate Mode,
press and hold on the
internal keypad, or on the
external keypad (after unlocking
the phone if locked).
To return to Normal Mode, press
and hold again on the
internal keypad, or on the
external keypad.
Mute Function
The Mute Function prevents the
transmission of your voice to the
caller. To quickly activate Mute
using the internal keypad, press
the Left Soft Key
To unmute press the Left Soft Key
[Unmute]
When the flip is closed, press
[
OPTIONS
[
Mute
[
OPTIONS
[
Unmute
], then press
]. To unmute, press
], then press
].
again.
[Mute]
.
Volume Quick Adjustment
Quickly adjust ringer and earpiece
volumes by pressing the upper
volume key to increase and the
lower volume key to decrease.
NOTE
The earpiece volume can only be
adjusted during a call.
Call Waiting
During a call, one beep indicates
that you have another incoming call.
Ignoring a Call Waiting
If you don't want to answer the
incoming call, press the Right Soft
Key
is open. When the flip is closed,
you can ignore the call by pressing
Ignore.
Answering a Call Waiting
1. Press the internal key /
2. Press the internal key /
[Ignore] when the flip
[
OPTIONS] and selecting
the external key whether
the flip is open or closed to
automatically put the first call
on hold and answer the new call.
the external key again to
put the second call on hold and
return to the first call.
26
Shortcuts
Your
enV®3
device has shortcut
keys built in to allow quick and
convenient access to phone
features.
NOTE
The preset shortcuts for the
internal keypad can be changed
to suit your needs.
External Directional Keys
Shortcut Access
1. Unlock the screen by pressing
once or twice.
2. Press the Navigation Key:
●
Up Navigation Key
My Music
accesses
●
Down Navigation Key
Messaging
accesses
●
Left Navigation Key
My Pictures
accesses
●
Right Navigation Key
Bluetooth Menu
accesses
Internal Directional Keys
Shortcut Access
1. Open the flip.
2. Press the Navigation Key:
●
Up Navigation Key
Dashboard
accesses
●
Down Navigation Key
Calendar
accesses
●
Left Navigation Key
accesses
My Account
●
Right Navigation Key
My Shortcuts
accesses
Voice Commands
Voice Commands allow you to do
things by verbal command (e.g.,
make calls, confirm Voicemail,
etc.).
1. Access the Voice Commands
feature:
●
With the flip open, press .
●
With the flip closed and the
screen unlocked, give the
a quick press (an extended press
activates the Voice Recorder
feature instead).
2. Follow the prompts to use your
voice command(s).
NOTE
Voice Commands can also be
started with the designated key
on your Bluetooth
Please check the manual of the
Bluetooth
instructions.
®
device.
®
device for further
27
Contacts in Your Phone’s Memory
Storing Basics
Using the Internal Keypad
1. Open the flip.
2. Enter a number (max. 48 digits),
then press the Left Soft Key
[Save]
.
Use the Directional Key to
3.
Add New Contact/
scroll to
Update Existing
4. Use the Directional Key to
scroll to
Work/ Mobile 2/ Fax,
press .
5. Enter a name (max. 32
characters), then press to
save.
6. Press to exit, to call,
or the Right Soft Key
[Options] for other options.
Using the External Keypad
1. Unlock the screen by pressing
once or twice.
2. Enter a number (max. 48 digits),
then press
3. Press to
, then press .
Mobile 1/ Home/
then
[OPTIONS].
Save.
4. Use the Directional Key to
Mobile 1/ Home/
scroll to
Work/ Mobile 2/ Fax,
press .
Enter a name (max. 32
5.
characters), then press to
save.
then
Using the External Keypad with
the Contacts Menu
1. Unlock the screen by pressing
once or twice.
2. Press [
3. Use the Directional Key to
scroll to Contacts, then press
4. Press
5. Enter the name, then use the
Directional Key to scroll
down to the phone number
type you want to enter.
6. Enter the number, then press
.
save.
to
MENU].
New Contact.
28
Loading...
+ 287 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.