trademarks are the property of their respective owners.
Important Safety Precautions
Read these simple guidelines. Breaking the rules may be dangerous or illegal.
Further detailed information is given in this user guide.
Violation of the instructions may cause serious injury or death.
●
Never use an unapproved battery since this could damage the
phone and/or battery and could cause the battery to
explode.
●
Never place your phone in a microwave oven as it will cause
the battery to explode.
●
Never store your phone in temperatures less than
-4°F or greater than 122°F.
●
Do not dispose of your battery near fire or with hazardous or
flammable materials.
●
When riding in a car, do not leave your phone or set up the
hands-free kit near the air bag. If wireless equipment is
improperly installed and the air bag is deployed, you may be
seriously injured.
●
Do not use a hand-held phone while driving.
●
Do not use the phone in areas where its use is prohibited.
(For example: aircraft)
1
Important Safety Precautions
●
Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as a
bathroom.
●
Do not use harsh chemicals (such as alcohol, benzene,
thinners, etc.) or detergents to clean your phone. This could
cause a fire.
●
Do not drop, strike, or shake your phone severely. It may
harm the internal circuit boards of the phone.
●
Do not use your phone in high explosive areas as the phone
may generate sparks.
●
Do not damage the power cord by bending, twisting, pulling,
or heating. Do not use the plug if it is loose as it may cause
electric shock or fire.
●
Do not place any heavy items on the power cord. Do not
allow the power cord to be crimped as it may cause electric
shock or fire.
●
Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock or seriously damage
your phone.
●
Do not disassemble the phone.
2
●
Do not place or answer calls while charging the phone as it
may short-circuit the phone and/or cause electric shock or
fire.
●
Do not hold or let the antenna come in contact with your
body during a call.
●
Make sure that no sharp-edged items, such as animal’s teeth
or nails, come into contact with the battery. This could cause
a fire.
●
Store the battery out of reach of children.
●
Be careful that children do not swallow any parts (such as
earphone, connection parts of the phone, etc.) This could
cause asphyxiation or suffocation resulting in serious injury or
death.
●
Unplug the power cord and charger during lightning storms
to avoid electric shock or fire.
●
Only use the batteries and chargers provided by LG. The
warranty will not be applied to products provided by other
suppliers.
●
Only authorized personnel should service the phone and its
accessories. Faulty installation or service may result in
accidents and consequently invalidate the warranty.
●
Your service provider programs one or more emergency
phone numbers, such as 911, that you can call under any
circumstances, even when your phone is locked. Your phone’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be placed
due to network, environmental, or interference issues.
3
Table of Contents
Important Safety Precautions . . .1
Welcome . . . . . . . . . . . . . . . . . 8
Technical Details . . . . . . . . . . .9
Important Information . . . . . . . . . . . . . . . . .9
Phone Overview . . . . . . . . . . .12
Quick Glance of the Touch
Screen and How to Use It . .14
FCC Hearing-Aid Compatibility
(HAC) Regulations for
Wireless Devices . . . . . . . . . . . .146
Accessories . . . . . . . . . . . . .149
LIMITED WARRANTY
STATEMENT . . . . . . . . . . . .150
Glossary . . . . . . . . . . . . . . . .153
Terminology . . . . . . . . . . . . . .153
Acronyms and Abbreviations . .153
Index . . . . . . . . . . . . . . . . . . .155
7
Welcome
Thank you for choosing the
Chocolate®TOUCH
cellular phone
designed to operate with the latest
digital mobile communication
technology, Code Division Multiple
Access (CDMA). Along with the
many advanced features of the
CDMA system, such as greatly
enhanced voice clarity, this
compact phone offers:
●
V CAST Music with Rhapsody
●
V CAST Video
●
V CAST Song ID
●
Mobile IM
●
Bing Search
●
VZ Navigator
●
VZW Tones Deluxe
●
Mobile Web Email
●
Visual Voice Mail
●
Corporate Email
●
BackUp Assistant
●
City ID
●
Touch Screen and auto Touch
Screen lock.
●
Display themes and Wallpapers
for customization.
●
Built-in 3.2 Megapixel digital
camera (with video mode).
●
Large, easy-to-read, backlit LCD
with status icons.
●
Messaging Voicemail, and caller
ID.
●
HTML Browser.
●
Media Center
●
Dolby®Mobile
●
FM Radio
●
Long battery standby and talk
time.
●
Easy operation; use Touch
Screen to choose menus and
answer prompts.
●
Any Key answer, Auto-answer
with Handsfree, auto retry, One
Touch and Speed Dialing (with
999 memory locations).
●
Bilingual (English and Spanish)
capability.
●
Bluetooth®wireless technology.
●
1GB of internal memory for
music
NOTE
The Bluetooth®word mark and
logos are owned by the
Bluetooth SIG, Inc. and any use
of such marks by LG Electronics
is under license. Other
trademarks and trade names are
those of their respective owners.
8
Technical Details
Important Information
This user’s guide provides important
information on the use and operation
of your phone. Please read this guide
carefully prior to using the phone to
be able to use your phone to its
greatest advantage and to prevent
any accidental damage or misuse. Any
unapproved changes or modifications
will void your warranty.
Technical Details
The
Chocolate®TOUCH
digital phone that operates on
both Code Division Multiple
Access (CDMA) frequencies:
cellular services at 800 MHz and
Personal Communication Services
(PCS) at 1.9 GHz.
CDMA technology uses a feature
called DSSS (Direct Sequence
Spread Spectrum) that enables the
phone to keep communication
from being crossed and to use one
frequency channel by multiple
users in the same specific area.
This results in a 10-fold capacity
increase when compared with
analog mode. In addition, features
such as soft/ softer handoff, hard
handoff, and dynamic RF power
control technologies combine to
reduce call interruptions.
The Cellular and PCS CDMA
networks consist of MSO (Mobile
Switching Office), BSC (Base
Station Controller), BTS (Base
Station Transmission System), and
is an all
MS (Mobile Station).
1xRTT system receives twice as
many subscribers in the wireless
section as IS-95. Its battery life is
twice as long as IS-95. High-speed
data transmission is also possible.
EV-DO system is optimized for
data service and is much faster
than 1xRTT system in applicable
area.
The table on the following page
lists some major CDMA standards.
FCC RF Exposure Information
WARNING! Read this information
before operating the phone.
In August 1996, the Federal
Communications Commission (FCC)
of the United States, with its action
in Report and Order FCC 96-326,
adopted an updated safety standard
for human exposure to Radio
Frequency (RF) electromagnetic
energy emitted by FCC regulated
transmitters. Those guidelines are
consistent with the safety standard
previously set by both U.S. and
international standards bodies. The
design of this phone complies with
the FCC guidelines and these
international standards.
Bodily Contact During Operation
This device was tested for typical
use with the back of the phone
kept 0.79 inches (2.0 cm) from
the body. To comply with FCC RF
exposure requirements, a minimum
separation distance of 0.79 inches
14.4kbps radio link protocol and
inter-band operations
IS-95 adapted for PCS frequency band CDMA2000
1xRTT Air Interface
MAS-BS
PCSC-RS
Intersystem operations
Non-signaling data comm.
Speech CODEC
Short Message Service
Packet Data
Position Determination Service (gpsOne)
High Speed Packet Data
CDMA2000 High Rate Packet Data Air Interface
1xEV-DO Inter-Operability Specification for HRPD
Access Network Interfaces
Recommended Minimum Performance Standards for
HRPD High Rate Packet Data Access Terminal
Test Application Specification(TAS) for High Rate
Packet Data Air Interface
(2.0 cm) must be maintained
between the user’s body and the
back of the phone, including the
antenna, whether extended or
retracted. Third-party belt-clips,
holsters, and similar accessories
containing metallic components
should not be used. Avoid the use
of accessories that cannot maintain
0.79 inches (2.0 cm) distance
between the user’s body and the
back of the phone and have not
been tested for compliance with
FCC RF exposure limits.
Vehicle-Mounted External
Antenna
(Optional, if available.)
To satisfy FCC RF exposure
requirements, keep 8 inches (20
cm) between the user / bystander
and vehicle-mounted the external
antenna. For more information
about RF exposure, visit the FCC
website at www.fcc.gov.
10
FCC Notice and Cautions
This device and its accessories
comply with part 15 of FCC rules.
Operation is subject to the following
two conditions: (1) This device and
its accessories may not cause
harmful interference, and (2) this
device and its accessories must
accept any interference received,
including interference that causes
undesired operation. Any changes or
modifications not expressly approved
in this user guide could void your
warranty for this equipment. Use
only the supplied antenna. Use of
unauthorized antennas (or
modifications to the antenna) could
impair call quality, damage the
phone, void your warranty and/or
violate FCC regulations. Don't use
the phone with a damaged antenna.
A damaged antenna could cause a
minor skin burn. Contact your local
dealer for a replacement antenna.
Part 15.21 statement
Changes or modifications that are
not expressly approved by the
manufacturer could void the user's
authority to operate the equipment.
Part 15.19 statement
This device and its accessories
comply with part15 of FCC rules.
Operation is subject to the following
two conditions:
(1) This device & its accessories
may not cause harmful
interference.
(2) This device & its accessories
must accept any interference
received, including interference
that may cause undesired
operation.
Part 15.105 statement
This equipment has been tested
and found to comply with the
limits for a class B digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates uses and can
radiate radio frequency energy and,
if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to television reception,
which can be determined by
turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between
the equipment and receiver.
- Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
- Consult the dealer or an
experienced radio/TV technician
for help.
11
Phone Overview
1. Earpiece
2. Touch Soft Keys
5. 3.5mm Headset Jack
6. Proximity Sensor
7. Light Sensor
8. Touch Screen
9. Shortcut Menu Touch Key
10. My Music Touch Key
3. SEND Key
4. Clear Key / Voice Command Key
NOTE
SEND Key, CLR / Voice Commands Key, and PWR / END Key are not illuminated when the display
is off. Press the Unlock Key, or any other exterior key, to illuminate the display and keys. To unlock the screen
and keys, lightly press and slide the icon upwards to reveal the Standby mode Touch Screen and Touch
Soft Keys.
1. Earpiece
2. Touch Soft Keys
3. SEND Key
4. Clear Key / Voice Command Key
5. 3.5mm Headset Jack
Lets you hear the caller.
provide easy access to Messages, the phone
Dialpad, the Main Menu, the Contact List, and
Favorites which easily activate with the touch of
your fingertip.
place calls from the Dialpad. From Standby
mode, pressing this key will open the All Calls
list.
single spaces or characters. Also backs out of
menus, one level at a time. While in Standby
mode, use for quick access to Voice Command
or press and hold to access Voice Recorder.
Touch Keys on this Touchpad
Use to answer incoming calls and to
Deletes
Allows you to plug in an
11. PWR/END Key
optional wired headset for convenient, handsfree conversations.
to connect headphones normally used with other
mp3 players.
6. Proximity Sensor
screen during a call if an object (like your head)
comes within close proximity, to prevent
accidental keypresses. Please note that some
phone cases may engage the sensor. The sensor
is disabled when using the Speakerphone, a
Bluetooth headset or the headset jack.
7. Light Sensor
brightness of the LCD. This conserves power and
extends battery life.
8. Touch Screen
messages and indicator icons as well as a wide
variety of content you select to view.
The 3.5mm jack also allows you
This sensor locks the Touch
Detects the amount of light, adjusts
Displays incoming calls,
12
12. Camera Lens
9. Shortcut Menu Touch Key
to a customizable Shortcut Menu.
10 . My Music Touch Key
the My Music application.
11. PWR/END Key
and to end a call. Also returns to Standby mode.
12. Camera Lens
recording video. Keep it clean for optimal
photo quality.
13. Accessory Charger Port
to the battery charger, or other compatible
accessories.
14. Side Volume Keys
Volume in Standby mode* and the Earpiece
Volume during a call.
Allows quick access
This shortcut key opens
Use to turn the power on/off
Used for taking pictures and
Connects the phone
Use to adjust the Master
13. Accessory/
Charger Port
14. Side Volume
Keys
15. Speakerphone
Key
15. Speakerphone Keys
deactivate the Speakephone function.
16. Lock/ Unlock Key
Touch Screen and keys.
17. My Music Key
music. Download, store and listen to music right
from your phone.
18. Camera Key
function. Press and hold the Camera Key to record
Video.
* Standby mode is when the phone is waiting for
input from you. No menu is displayed and the
phone isn’t performing any action. It’s the
starting point for all of the instruction steps.
16. Lock/ Unlock Key
17. My Music Key
18. Camera Key
Press to activate or
Press to lock or unlock the
Use for quick access to your
Use for quick access to Camera
13
Quick Glance of the Touch Screen and How to Use It
Touch Sensitive Soft Keys
(,,,,)
1. Make sure your hands are clean
and dry. Remove moisture from
the surface of your hands. Don't
use the touch keys in a humid
environment.
2. Touch screen is sensitive to your
light touch. You don't need to
press it forcefully to use it.
Protect your phone from severe
impact because touch screen
sensors may become damaged
from harsh use.
3. Use the tip of your finger to
touch the center of a touch key.
If you touch off-center it may
activate the nearby function
instead.
4. The touch feedback level can be
adjusted to your preference.
5. When both the LCD screen and
backlight are off, all keys are
deactivated. Press the Unlock
Key ( ) twice to turn on and
unlock the Touch Screen.
6. The Proximity Sensor protects
against accidental key presses
during phone calls by locking the
screen.
7. Keep metal and other conductive
material away from the surface of
touch screen because contact
may cause electronic interference.
How to Unlock
Touch the
icon and slide up
to unlock the
screen.
Press the
Unlock Key on
OR
the side of
your phone.
Press twice if
the backlight is
off.
14
Calibrating the Touch Screen
Calibration allows the phone to
recognize the accuracy of your
touch.
1. Unlock the Touch Screen by
sliding the Slide icon up or
press the Unlock Key ( ) on
the right side of your phone.
Then, touch the Menu Touch
Soft Key .
Settings
2. Touch the
3. Touch
Touch Settings
icon .
.
4. Place your finger on the Touch
Screen and apply gentle upward
pressure to scroll the list up, then
touch
Calibration
.
5. Touch the target each time it
appears.
6. After setting calibration, touch
Check calibration
without check
●
If you touch
or
Save
.
Check calibration
touch each target as it appears
again. The screen will display a
purple dot to indicate the
location of your touch. If you are
satisfied with your accuracy,
Ye s
touch
to save, or touch
No
to try again.
●
Touch
Save without check
to
save without viewing your touch
accuracy.
,
15
Shortcut Menu
Touch Screen Shortcut Menu
The Touch Screen Shortcut Menu allows instant access to menus and phone
features with the quick touch of your fingertip. To use the Shortcut Menu:
1. Unlock the Touch Screen by sliding the Slide icon up or press the
Unlock Key ( ) on the right side of your phone.
2. Touch the Shortcut Menu icon .
3. Touch the My Media tab to access, and/or manage, shortcuts to your
favorite Media files (including pictures, videos, and music).
4. To close the Shortcut Menu, press the Clear or PWR/END Key.
Touch Soft Keys
Messages: Displays
the Messages menu.
Menu: Displays the Main Menu.
Phone: Displays the Dialpad Touch
Keys so you can make a call. Dial
manually using the numeric keys or
easily from your Recent Calls,
Contacts, or Voice Dial.
16
Contacts:
Displays your
Contact List.
Favorites: Displays
your favorite
contacts.
When you touch the Phone Touch Soft Key the following Dialpad is
displayed:
Touch and hold this
Touch Key to call your
voice mail box.
Touch this Touch Key to
dial using Voice
Command.
Touch this Touch Key to view
the recent call history.
Touch this Touch Key to display your
Contact List to view or call a Contact.
Touch and hold this
Touch Key to toggle
your phone between
Vibrate Mode and
Normal Mode.
Touch this Touch Key
to delete digits
entered one by one.
Hold down to delete
the entire entry.
17
Entering and Editing Information
Text Input
You can enter information using the
Touch Screen keypad. There are
special key functions to help you
with text entry.
Text Input While Composing a
TXT Message
1. Unlock the Touch Screen by
sliding the Slide icon up or
press the Unlock Key ( ) on
the right side of your phone.
2. Touch the Message Touch Soft Key
.
3. Touch .
4. Select
TXT Message
.
5. Touch the Text Field to begin
entering text. A touch keypad will
popup.
6. To access Text Input options, press
the Text Options Touch Key .
The options are:
Insert Quick Text/ Save As
Draft/ Add/ Format Text/
Priority Level/ Callback#/ Save
Quick Text/ Cancel Message
Text Entry Options.
Insert Quick Text/ Save As Draft/
Add/ Format Text/ Priority Level/
Callback#/ Save Quick Text/
Cancel Message
Touch to exit text input mode.
Touch to change text input modes.
Handwriting/Keypad Toggle Key.
18
When entering text, besides
"typing" the text with Touch Keys,
you also have the option to write
with your fingertip. The Touch
Screen interprets your movements
into characters.
1. Touch a text field, then touch the
manual writing icon on the
right side of the display.
2. Use your fingertip to write each
character you want. You must write
in the box that appears in the lower
half of the screen. If the Touch
Screen does not display the
character you intended, press the
Clear/Voice Commands Key
to delete characters, and try again.
For instructions on how to better
use the handwriting function, see
the next page.
TIP
When you "write" on the Touch Screen,
the interpreted movements will be
displayed. Gaps in lines may indicate that
you need to press slightly harder for more
constant contact with the Touch Screen.
NOTE
The handwriting option may not
be available for all text entry
fields.
Handwriting
Recognition Field
Changing Input Method
To change from "writing" to
"typing":
In the hand-writing screen, touch
the Keypad icon on the righthand side.
After creating a
message, touch
to send the message.
SEND
19
Entering and Editing Information
The following tables may help in understanding how the Touch Screen
interprets movements into characters.
Writing in Upper-Case
Writing in Lower-Case
Note that you must touch the All Caps Touch
Key to write in upper-case letters.
Note that you must touch the Numbers
Touch Key to write in numbers.
20
Note that you must touch the Symbols
Touch Key to write in symbols.
Menu Tree
My V
erizon
My V
erizon
ssaging
MeMessaging
1. New Message
1. TXT Message
2. Picture Message
3. Video Message
4. Voice Message
2. Messages*
3. Drafts
4. Voicemail
5. Visual Voice Mail
6. Mobile IM
7. Email
8. Chat
9. Social Network
Message
10. Settings
1. Messages View
2. Entry Mode
3. Text Entry Settings
4. Auto Save Sent
5. Auto Erase Inbox
6. Message Font Size
7. TXT Auto View
8. TXT Auto Scroll
9. Multimedia Auto
Receive
10. Quick Text
11. Voicemail#
12. Callback#
13. Signature
14. Delivery Receipt
11. Erase Options
ont
actss
CCont
act
1. New Contact
2. Contact List
3. Backup Assistant
4. Favorites
5. Groups
6. Speed Dials
7. In Case of Emergency
8. My Name Card
ecent Calls
RRecent Calls
1. Missed
2. Received
3. Dialed
4. All
5. View Timers
Media C
enterer
Media C
ent
1. Music & Tones
1. V CAST Music |
Rhapsody
2. Get New
Ringtones
3. My Ringtones
4. My Music
5. My FM Radio
6. My Sounds
7. Sync Music
2. Picture & Video
1. V CAST Videos
2. Get New Pictures
3. My Pictures
4. My Videos
5. Take Picture
6. Record Video
7. Online Album
3. Games
1. Get New
Applications
2. Rock Band
3. The Sims 3
4. Browser
5. Browse & Download
* The submenu options Messages vary and depend on the Message View settings.
21
Menu Tree
1. Get New
Applications
2. City ID
3. Bing
4. VZ Navigator
5. Visual Voice Mail
6. Mobile Email
7. Corporate Email
8. Backup Assistant
6. Extras
1. Get New
Applications
7. Info
1. Memory
2. Music Memory
3. View Log
4. Help
5. About
My Music
My Music
1. Play All
2. Shop
3. Sync
4. FM Radio
5. All Songs
6. Playlists
7. Artists
8. Genres
9. Albums
10. Manage My Music
11. Music Settings
12. Music Alerts
ser
BrBroowwser
Searchch
Sear
Email
Email
1. Mobile Email
2. Corporate Email
3. Mobile Web Mail
VZ Na
vigattoror
VZ Na
viga
ools
TTools
1. Voice Commands
2. Calculator
3. Ez Tip Calculator
4. Calendar
5. Alarm Clock
6. Stopwatch
7. World Clock
8. Notepad
9. Drawing Pad
10. USB Mass Storage
tings
SeSetttings
1. My Verizon
2. Bluetooth Menu
3. Sounds Settings
1. Easy Set-up
2. Master Volume
3. Call Sounds
1. Call Ringtone
2. Call Vibrate
3. Caller ID
Readout
4. Alert Sounds
1. TXT Message
2. Multimedia
Message
3. Voicemail
4. Emergency
Tone
5. Missed Call
5. Button Sounds
6. Digit Dial Readout
7. Service Alerts
1. ERI
2. Minute Beep
3. Call Connect
4. Charge
Complete
22
8. Power On/Off
1. Power On
Sound
2. Power On
Vibrate
3. Power Off
Sound
4. Power Off
Vibrate
4. Display Settings
1. Easy Set-up
2. Banner
1. Personal
Banner
2. ERI Banner
3. Backlight
4. Wallpaper
1. My Pictures
2. My Videos
3. Fun Animations
5. Charging Screen
6. Display Themes
7. Fonts
8. Dial Fonts
9. Clock Format
10. Shortcut Bin
11. Music Handle
5. Touch Settings
1. Auto Lock
2. Vibrate Type
3. Vibrate Level
4. Vibrate Effect
5. Sound
6. Calibration
6. Phone Settings
1. Airplane Mode
2. Voice Commands
1. Confirm
Choices
2. Sensitivity
3. Adapt Voice
4. Prompt Mode
5. Audio Playback
6. Prompt
Timeout
7. CLR Key
Activation
8. Info
3. Language
4. Location
5. Current Country
6. Security
1. Edit Codes
2. Restrictions
3. Phone Lock
4. Lock Phone
Now
5. Reset Default
6. Restore Phone
7. System Select
8. NAM Select
7. Call Settings
1. Answer Options
2. Show Dialpad
3. Auto Retry
4. TTY Mode
5. One Touch Dial
6. Voice Privacy
7. DTMF Tones
8. Assisted Dialing
8. USB Auto Detection
9. Memory
1. Save Options
2. Phone Memory
3. Card Memory
10. Phone Info
1. My Number
2. SW/HW Version
3. Icon Glossary
4. Software Update
11. Set-up Wizard
23
Getting Started with Your Phone
The Battery
NOTE
It is important to fully charge the
battery before initial use of the
phone.
The phone comes with a
rechargeable battery. The battery
charge level is shown at the top of
the LCD screen.
Installing the Battery
To install the battery, insert the edge
with the battery contacts into the
opening on the back of the phone.
Push the battery down until it clicks into
place, then attach the back cover.
Removing the Battery
Turn power off and slide the back
cover down to remove it. Use the
fingertip cutout at the edge of the
battery to lift the edge of the
battery to remove it.
Removing & Installing the battery
cover
You need to remove the back cover
before you can install the battery
and micro SD card on your phone.
Also, make sure to always turn off
the power before installing or
replacing a battery.
To remove the back cover
1. Hold the phone securely with
both hands (as demonstrated).
2. Push the back cover up with
your thumb until it disengages
from the phone and then slide it
up to remove.
24
To install the back cover
Slots
1. Align the battery cover slightly
lower than the top edge of the
phone. Make sure that the hooks
on the battery cover are placed
in the phone's slots.
2. Hold the phone securely with
both hands (as demonstrated).
3. Slide the battery cover upward
with your thumbs until it clicks
into place.
Charging the Battery
Your
Chocolate®TOUCH
comes with a cableless wall adapter
and a USB data cable which
connect together to charge your
phone. To charge your phone:
NOTICE
Please use only an approved charging
accessory to charge your LG phone. Improper
handling of the charging port, as well as the
use of an incompatible charger, may cause
damage to your phone and void the warranty.
1. Connect the USB data cable into
the cableless wall adapter, as
shown below.
Gently uncover the phone's
2.
accessory/ charging port. Then
plug the USB data cable (as
shown in the next image) into the
accessory/ charger port and the
other end into an electrical outlet.
device
Cableless Wall Adapter
25
Getting Started with Your Phone
How to Install a microSDTMCard
NOTICE
Please make sure that the
'B' side is facing up before
inserting a charger or data
cable into the charger port
of your phone.
3. The charge time varies
depending upon the battery
level.
Charging with USB
You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
may need to have the necessary
USB Driver installed on your PC
first. Connect one end of the USB
cable to the charging accessory
port on your phone and the other
end to a bus-powered USB port on
your PC.
NOTE
Low-powered USB ports are not
supported, such as the USB port
on your keyboard or buspowered USB hub.
microSDTMslot
1. Remove the back cover and
locate the microSD
TM
slot on
the left side.
TM
2. Insert the microSD
card
(purchased separately) with
the logos facing up. Push in
until it clicks into the slot.
Please note that if you insert
the card in the wrong
direction, it may damage your
phone or your card.
26
How to Remove a microSD
TM
Card
1. Gently push the card in, this will
release the exposed edge of the
TM
microSD
2. Remove the microSD
the slot and replace the cover.
NOTE
• Do not attempt to remove the
microSD
to the card.
• Users wishing to transfer or download music
onto a MicroSD
phone (through either MTP Sync or Over the
Air) should format the MicroSD
handset before using it through (Menu ->
Settings -> Memory -> Card Memory ->
Format). Warning: Formatting the MicroSD
card will erase all contents on the card. In the
event the MicroSD
phone without first formatting it, the phone
will display “License acquisition failed” during
OTA downloading or MTP Sync. Song files
downloaded or otherwise purchased from
third party providers and stored on a
MicroSD
be protected or encrypted by such provider
and cannot be played on this device.
card to eject it.
TM
card from
TM
card while reading or writing
TM
card inserted into this
TM
card on this
TM
card is used on this
TM
card inserted into this device may
TM
Battery Temperature
Protection
Though extremely rare, if the
battery becomes overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.
Battery Charge Level
You can find the battery charge level
at the top right of the LCD screen.
When the charge level becomes low,
the battery sensor sounds a warning
tone, blinks the battery icon, and
displays a warning message. As the
charge level approaches empty, the
phone automatically switches off
without saving.
27
Getting Started with Your Phone
Turning the Phone On and
Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an
external power source.
2. Press the PWR/ENDKey
for a few seconds until the
Touch Screen lights up.
Turning the Phone Off
1. Unlock the Touch Screen by sliding
the Slide icon up to unlock or
press the Unlock Key ( ) on the
right side of your phone.
2.
Press and hold the PWR/END
Key until the display turns
off.
Signal Strength
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon: the more bars,
the stronger the signal. If you’re
having problems with signal quality,
move to an open area or, when
inside a building, try moving near a
window.
Screen Icons
When the phone is on, the top line
of the LCD screen displays phone
status icons. To view what they mean:
1. Unlock the Touch Screen by sliding
the Slide icon up to unlock or
press the Unlock Key ( ) on the
right side of your phone and touch
the Menu Touch Soft Key .
2. Touch the Settings icon .
3. Scroll the list up, then touch
Phone Info
4. Touch
.
Icon Glossary
.
Making Calls
1. Unlock the Touch Screen by sliding
the Slide icon up to unlock or
press the Unlock Key ( ) on the
right side of your phone.
2. Touch the Phone Touch Soft Key
, to display the dialpad you
can use to dial. Enter the phone
number you want to call.
NOTE
You can search your Contact List
CONTACTS
() or Recent Calls
() and select a number to
RECENT
call instead of manually dialing.
3. Press the SENDKey or
touch the Call touch key
to place the call.
CALL
28
Loading...
+ 132 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.