LG LGUX265 User Manual

Important Safety Precautions
1
Important Safety Precautions
Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.
WARNING! Violation of the instructions may cause serious injury or death.
2. Never place your phone in a microwave oven as it will cause the battery to explode.
3. Never store your phone in temperatures less than
-4°F or greater than 122°F.
4. Do not dispose of your battery by fire or with hazardous or flammable materials.
5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.
6. Do not use a hand-held phone while driving.
7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 1
Important Safety Precautions
2
Important Safety Precautions
1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.
2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This could cause a fire.
3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.
4. Do not use your phone in high explosive areas as the phone may generate sparks.
5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.
6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.
7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.
8. Do not disassemble the phone.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 2
3
Important Safety Precautions
1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.
2. Do not hold or let the antenna come in contact with your body during a call.
3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.
4. Store the battery out of reach of children.
5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury or death.
6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.
8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.
9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 3
Table of Contents
4
Table of Contents
Important Safety Precautions 1
Table of Contents 4
Welcome 10
Technical Details 11
Important Information 11
FCC Part 15 Class B Compliance 11
Technical Details 11
FCC RF Exposure Information 13
Bodily Contact During Operation 13
Vehicle-Mounted the External Antenna 14
FCC Notice and Cautions 14
Part 15.105 statement 15
Phone Overview 16
Entering Text With the QWERTY Keyboard 18
Menus Overview 20
Getting Started with Your Phone 23
The Battery 23
Installing the Battery 23
Removing the Battery 23
Charging the Battery 23
Removing and Installing the Faceplate 24
How to Install Your microSD
Card 25
How to Remove Your microSD
Card 25
Battery Charge Level 26
Turning the Phone On and Off 26
Turning the Phone On 26
Turning the Phone Off 26
Signal Strength 26
Screen Icons 27
Making Calls 27
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 4
5
Table of Contents
Correcting Dialing Mistakes 27
Redialing Calls 28
Receiving Calls 28
Quick Access to Convenient Features 29
Lock Mode 29
Mute Function 29
Volume Quick Adjustment 29
Call Waiting 30
Caller ID 30
Speed Dialing 30
Entering and Editing Information 32
Text Input 32
Key Functions 32
Contacts in Your Phone’s Memory 33
The Basics of Storing Contacts Entries 33
Phone Numbers With Pauses 33
Searching Your Phone’s Memory 35
Making a Call From Your Phone’s Memory 36
Using Phone Menus 38
Contacts 38
1. New Contact 38
2. Contact List 39
3. Groups 39
4. Speed Dials 40
5. My Name Card 40
Messaging 41
1. New Text Message 41
2. New Picture Message 43
3. Inbox 45
4. Sent 46
5. Drafts 48
6. Voicemail 48
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 5
Table of Contents
6
Table of Contents
7. Templates 49
8. Settings 49
8.1 All Messages 50
8.2 Text Message 50
8.3 Picture Message 51
8.4 Edit Voicemail # 51
9. Delete All 51
Call History 52
1. Missed Calls 52
2. Received Calls 52
3. Dialed Calls 52
4. All Calls 53
5. Call Timer 53
6. Data Counter 53
Multimedia 54
1. Take Photo 54
2. Record Voice 55
3. Images 55
4. Audios 56
5. Shuffle 57
easyedge
SM
58
1. easyedge Apps 59
Music 59
1. All Songs 60
2. Playlists 60
3. Recently Played 60
4. Artists 61
5. Genres 61
6. Albums 61
Bluetooth
®
62
1. Paired Devices 62
2. Power 63
3. My Visibility 64
4. My Bluetooth Name 64
5. My Bluetooth Info 64
Tools 65
1. Voice Command 65
1.1 Start Command 65
1.1.1 Call <Name> or <Number> 65
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 6
7
Table of Contents
1.1.2 Voicemail 65
1.1.3 Missed Calls 66
1.1.4 Messages 66
1.1.5 Time & Date 66
1.1.6 Help 66
1.2 Command Mode 66
1.3 Announce Alert 67
1.4 Train Word 67
1.5 Best Match 67
2. My Menu 67
3. Calendar 68
4. Ez Tip Calc 68
5. Notepad 68
6. Calculator 69
7. World Clock 69
8. Stopwatch 70
9. Unit Converter 70
Settings 71
1. Sound 71
1.1 Ringers 71
1.2 Volume 71
1.3 Message Alerts 71
1.4 Alert Type 72
1.5 Service Alerts 72
1.6 Power On/Off Tone 72
1.7 Slide Tone 73
2. Display 73
2.1 Wallpaper 73
2.2 Banner 73
2.3 Backlight 74
2.4 Menu Style 74
2.5 Languages 74
2.6 Clocks & Calendar 74
2.7 Font Settings 75
2.8 Color Schemes 75
2.9 Word Prediction 75
2.0 Name Match for Dialing 76
3. Keyguard Timer 76
4. Security 76
4.1 Lock Phone 76
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 7
Table of Contents
8
Table of Contents
4.2 Restrictions 77
4.3 Emergency #s 77
4.4 Change Lock Code 78
4.5 Reset Default 78
5. Call Settings 79
5.1 Answer Options 79
5.2 Auto Retry 79
5.3 One-Touch Dial 79
5.4 Voice Privacy 80
5.5 Airplane Mode 80
5.6 TTY Mode 80
6. PC Connection 81
7. S y s tem 81
7.1 Network 81
7.2 Location 82
8. Memory 83
9. Phone Info 83
PAC-MAN 84
Alarm Clock 84
Your Navigator 84
Safety 85
TIA Safety Information 85
Exposure to Radio Frequency Signal 85
Antenna Care 85
Phone Operation 86
Tips on Efficient Operation 86
Driving 86
Electronic Devices 86
Pacemakers 86
Persons with Pacemakers: 87
Hearing Aids 87
Other Medical Devices 87
Health Care Facilities 87
Vehicles 88
Posted Facilities 88
Aircraft 88
Blasting Areas 88
Potentially Explosive Atmosphere 88
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 8
9
Table of Contents
For Vehicles Equipped with an Air Bag 89
Safety Information 89
Charger and Adapter Safety 89
Battery Information and Care 90
Explosion, Shock, and Fire Hazards 90
General Notice 91
Warning! Important safety information 92
Avoiding hearing damage 92
Using your phone safely 93
Avoiding hearing damage 93
Using headsets safely 94
FDA Consumer Update 94
10 Driver Safety Tips 104
Consumer Information on SAR 108
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices 111
Accessories 114
Limited Warranty Statement 115
Index 119
Some content in this user guide may differ from your phone depending on the phone software. Features and specifications are subject to change without prior notice.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 9
Welcome
10
Welcome
Thank you for choosing the
cellular phone, designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, this compact phone offers:
G
Significantly enhanced voice clarity
.
G
Slim and sleek design with internal antenna (Internal antenna described as antenna throughout this user guide).
G
Large, easy-to-read, 9-line backlit LCD with status icons.
G
Paging, messaging, voice mail, and caller ID.
G
23-Key external keypad and QWERTY internal keypad.
G
Speakerphone feature.
G
Menu-driven interface with prompts for easy operation and configuration.
G
Any key answer, auto answer, auto retry, one-touch and speed dialing with 99 memory locations.
G
Bilingual (English and Spanish) capabilities.
G
Bluetooth®wireless technology.
G
Music capability and microSD
card slot.
Note
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 10
Technical Details
11
Technical Details
Important Information
This user’s guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty.
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation.
Technical Details
The is a trimode phone that operates on both (Code Division Multiple Access CDMA) frequencies: cellular services at 800 MHz and (Personal Communication Services PCS) at 1.9 GHz.
CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard handoff, and dynamic RF power control technologies combine to reduce call interruptions.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 11
Technical Details
12
Technical Details
The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base
Station Controller), BTS (Base Station Transmission System), and MS (Mobile Station).
CDMA Standard
Basic Air Interface
TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000 ANSI TIA/EIA 553A
CDMA Dual Mode Air Interface
14.4kbps radio link protocol and inter­band operations IS-95 adapted for PCS frequency band cdma2000 1xRTT AirInterface
MAS-BS PCSC-RS Intersystem operations Non-signaling data comm.
Cellular base station Cellular mobile station PCS personal station PCS base station Speech CODEC
TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124
TIA/EIA/IS-97 TIA/EIA/IS-98 ANSI J-STD-018 ANSI J-STD-019 TIA/EIA/IS-125
TIA/EIA/IS-96-B TIA/EIA/IS-99 TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 TIA/EIA/IS-707-A
Speech CODEC Sync Data and Fax Short message service Packet Data Position Determination Service (gpsOne) High Speed Packet Data
Network
Service
Performance
Designator
Description
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 12
13
Technical Details
* TSB-74: Protocol between an
IS-95A system and ANSI J­STD-008
1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. High­speed data transmission is also possible.
The table (on the previous page) lists some major CDMA standards.
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for
human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.
Bodily Contact During Operation
This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of
0.79 inches (2.0 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 13
Technical Details
14
Technical Details
extended or retracted. Third­party belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain
0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.
Vehicle-Mounted the External Antenna
(Optional, if available.)
To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted the external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.
FCC Notice and Cautions
This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation.
Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 14
15
Technical Details
Don't use the phone with a damaged antenna. A damaged antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment
does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 15
Phone Overview
16
Phone Overview
1. Earpiece Lets you hear the caller.
2. LCD Screen
Displays messages and indicator icons. When the phone is turned on, power save mode automatically dims the screen and then darkens it if no keys are pressed.
3. Left Soft Key Use to access Messaging when in
Standby Mode. Performs the functions indicated by the text on the display immediately above it.
4. Speakerphone Key Use to turn Speaker On or Off.
5. TALK Key Use to place or answer calls.
6. Alphanumeric Keypad Use to enter numbers,
characters and to select menu items.
7.
Vibrate Mode Key
Use to set Vibrate mode(from
standby mode press and hold for about 3 seconds).
8. Navigation Key Use for quick access to Calendar,
Bluetooth
®
, My Menu and easyedge.
9. Right Soft Key Use to access the Contact List when in
Standby Mode. Performs the functions indicated by the text on the display immediately above it.
10 . BAC K Key
Deletes single spaces or characters with a
quick press, but press and hold to delete entire words. Will also back you out of menus, one level at a time.
11.
Menu/OK Key
Selects the function displayed at the bottom of the LCD between the Left and Right Soft Key functions.
12 . PWR/END Key
Use to turn the power on/off and to end a call. Also returns to the Standby Mode display screen.
13 .
Lock Mode Key
Use to lock the phone (from standby
mode press and hold for about 1.5 seconds).
14 . Charger Port Connects the phone to the battery
charger or other available accessories.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 16
17
Phone Overview
15 .
Camera Lens
Use to take photos.
Keep it clean for optimal photo quality.
16 . Side Keys Use to adjust the ringer volume in standby
mode and the earpiece volume during a call.
17. Side Camera Key
Use for quick access to Camera functions.
18 . Earphone Jack Allows the use of a headset to hear
caller's voice.
19 . microSD
TM
card slot Insert microSD™card for external
memory. Use LG approved microSD
card.
Navigation Shortcut Keys
Bluetooth Key Use to access Bluetooth®.
My Menu Key Use to access My Menu.
Calendar Key Use to access Calendar.
eeaassyy
edge Key Use to access easyedge.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 17
Phone Overview
18
Phone Overview
Entering Text With the QWERTY Keyboard
Your phone features a slide-out QWERTY keyboard, specifically designed for easy and comfortable text entry. The QWERTY keyboard uses the same layout and works just like the keyboard on your computer. The easiest way to enter text is using your thumbs to type on the QWERTY keyboard.
SHIFT Key
BACK Key
Soft Keys
Perform the functions indicated by the text on the display immediately above them.
OK Key
Function Key
SYM Key
Function Key:
Press one time (while entering text):
is displayed on the bottom-left of the screen. Corresponding special characters on the QWERTY keypad can be entered, one at a time.
Press two times (while entering text):
is displayed at the bottom-left of the screen. Corresponding special characters on the QWERTY keypad will be entered at every key press, until the Function Key is pressed again.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 18
19
Phone Overview
To enter text with the QWERTY keyboard:
1. In any text entry screen, slide open the QWERTY keyboard. (The display automatically adjusts to landscape mode.)
2. Use your thumbs to enter text.
To change capitalization, press .
To enter alternate characters on a key, press and then press the key. To lock the function key (as when entering a series of numbers), press twice.
To enter symbols, press the , then press select a symbol.
For additional text entry mode options, including Symbols and 123, press the Left Soft Key and select an option.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 19
Menus Overview
20
Menus Overview
Contacts
1. New Contact
2. Contact List
3. Groups
4. Speed Dials
5. My Name Card
Messaging
1. New Text Message
2. New Picture Message
3. Inbox
4. Sent
5. Drafts
6. Voicemail
7. Templates
8. Settings
1. All Messages
2. Text Message
3. Picture Message
4. Edit Voicemail#
9. Delete All
1. Delete Inbox
2. Delete Sent
3. Delete Drafts
4. Delete All Messages
Call History
1. Missed Calls
2. Received Calls
3. Dialed Calls
4. All Calls
5. Call Timer
6. Data Counter
Multimedia
1. Take Photo
2. Record Voice
3. Images
1. My Images
2. Default
4. Audios
1. My Audios
2. Default
5. Shuffle
1. Ringtone List
2. Wallpaper List
easyedge
1. easyedge Apps
Music
1. All Songs
2. Playlists
3. Recently Played
4. Artists
5. Genres
6. Albums
Bluetooth
1. Paired Devices
2. Power
3. My Visibility
4. My Bluetooth Name
5. My Bluetooth Info
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 20
21
Menus Overview
Tools
1. Voice Command
1. Start Command
2. Command Mode
3. Announce Alert
4. Train Word
5. Best Match
2. My Menu
3. Calendar
4. Ez Tip Calc
5. Notepad 6 Calculator
7. World Clock
8. Stopwatch
9. Unit Converter
Settings
1. Sound
1. Ringers
2. Volume
3. Message Alerts
4. Alert Type
5. Service Alerts
6. Power On/Off Tone
7. Slide Tone
2. Display
1. Wallpaper
2. Banner
3. Backlight
4. Menu Style
5. Languages
6. Clocks & Calendar
7. Font Settings
8. Color Schemes
9. Word Prediction
0. Name Match for Dialing
3. Keyguard Timer
4. Security
1. Lock Phone
2. Restrictions
3. Emergency #s
4. Change Lock Code
5. Reset Default
5. Call Settings
1. Answer Options
2. Auto Retry
3. One-Touch Dial
4. Voice Privacy
5. Airplane Mode
6. TTY Mode
6. PC Connection
1. USB Modem
2. USB Mass Storage
3. Bluetooth
4. Setting Reminder
7. S y s t e m
1. Network
2. Location
8. Memory
1. Save Options
2. Phone Memory
3. Card Memory
9. Phone Info
1. My Number
2. ESN/MEID
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 21
Menus Overview
22
Menus Overview
3. Icon Glossary
4. Version
PAC-MAN
Alarm Clock
Your Navigator
Menu Access
Press Menu to access the twelve phone menus. There are two methods of accessing menus and submenus:
G
Use the navigation key to highlight and select, or
G
Press the number key that corresponds with the menu (or submenu).
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 22
Getting Started with Your Phone
23
Getting Started with Your Phone
Notice
Please make sure that the LG logo of the charger connector faces down before inserting a charger, data cable, etc into the charger port of your phone.
The Battery
The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.
Installing the Battery
Remove the battery cover by sliding it upward. Align the battery with the terminals near the bottom of the phone. Align the battery cover then slide it downward until it clicks into place.
Removing the Battery
1. Turn off the phone, then push the battery cover from down to up such as shown below.
2. While holding the battery cover, lift and remove the battery cover.
3. Lift the top of the battery out using the fingertip cutouts, then remove it.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the phone. Using any charger other than the one included with the may damage your phone or battery.
Note
It is important to fully charge the battery before initial use of the phone.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 23
1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet.
2. The charge time varies depending upon the battery level.
Removing and Installing the Faceplate
Removing the Faceplate
Do not use an object with a small point or card, such as a push pin or thumb tack.
Place the fingertip in the small space between the faceplate and the rest of the phone located above the charger port. Then gently pry the faceplate apart from the phone.
Installing the Faceplate
Align the two retaining notches on the top side of the phone with the top side of the faceplace.
Starting at the top, press down on the left and right sides of the faceplate and work your way down until you get to the bottom side of the phone.
Getting Started with Your Phone
24
Getting Started with Your Phone
*Bottom indicator
Retaining clips**
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 24
25
Getting Started with Your Phone
How to Install Your microSD™Card
1. Locate the microSD™slot on the right side of the phone and gently uncover the slot opening (microSD
slot cover stays attached to the phone so you don't lose it).
2. Insert the microSD
card facing up and push in until it clicks into the slot. If you insert the card in the wrong direction, it may damage your phone or your card.
How to Remove Your microSD™Card
1. Gently press and release the exposed edge of the microSD
card to eject it.
2. Remove the microSD
card from the slot and replace the cover.
Note
Do not attempt to remove the microSD
card while reading or
writing to the card.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 25
Battery Charge Level
The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or connect the phone to an external power source.
2. Press for about 3 seconds until the LCD screen lights up.
Turning the Phone Off
1. Press and hold until the display turns off.
Signal Strength
Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars on the signal strength icon . The more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window.
Note
The call quality is also affected by environmental factors such as weather conditions.
Getting Started with Your Phone
26
Getting Started with Your Phone
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 26
Screen Icons
To see the icon glossary, go to
Menu
-
>
Settings
-
>
Phone Info
-
>
Icon
Glossary
on your phone.
Making Calls
1. Make sure the phone is turned on. If not, press for about 3 seconds to turn it on.
2. Enter the phone number (include the area code if needed).
3. Press .
lf the phone is locked, enter the lock code (the last 4 digits of your phone number by default and it's changeable in Settings menu).
4. Press to end the call.
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press once to erase the last digit entered, or hold down for at least 2 seconds to go to the standby mode.
27
Getting Started with Your Phone
Note
If the phone is restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contact List. To turn off this function:
Menu -> Settings ->
Security -> Lock Code ->
->
Restrictions->Lock
Code->
-> Outgoing
Calls -> Allow All ->
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 27
Getting Started with Your Phone
28
Getting Started with Your Phone
Redialing Calls
1. Press twice to redial the last number you dialed. The last 120 numbers (40 missed, 40 received and 40 dialed) are stored in the call history list and you can also select any of these to redial.
Receiving Calls
1. When the phone rings or vibrates, press to answer.
2. Press to end the call.
Tip
To choose answer options:
Menu
->
Settings
->
Call Settings
->
Answer Options
. Choose
from the following options:
TALK Key Only/ Any Key/ Auto Answer
Note
If you press or (the side keys), while the phone is ringing, the ringing or vibration is muted for that call.
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 28
Quick Access to Convenient Features
29
Quick Access to Convenient Features
Lock Mode
Keyguard Mode Quick Activation
1. Press Menu when the slide is closed.
2. Press
Settings
.
3. Press
Keyguard Timer
.
4. Highlight a timer setting, then press to select it.
7 Seconds/ 15 Seconds/ 2 Minutes/ Always Off
Keyguard Mode Quick Cancellation
1. Once locked, to deactivate Keyguard, press Right Soft Key Unlock, then press
.
Mute Function
The Mute Function is used during a phone call. To quickly activate Mute press Left Soft Key Mute, then to cancel press Left Soft Key Unmute.
Volume Quick Adjustment
Use the side keys to adjust the ringer volume while in standby mode, and the earpiece volume during a phone call. The upper key increases the volume and the lower key decreases the volume.
Note
Keypad Volume is adjusted through the Sound Volume menu:
Menu
-
>
Settings
-
>
Sound
-
>
Volume
-
>
Keypad
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 29
Call Waiting
Your cellular service may offer call waiting. While a call is in progress one beep indicates an incoming call. When call waiting is enabled, you may put the active call on hold while you answer the other incoming call. Check with your cellular service provider for information about this function.
1. Press to receive a waiting call.
2. Press again to switch between calls.
Caller ID
Caller ID displays the phone number or name of the incoming call. If the caller’s identity is stored in Contacts, the name will appear along with the phone number. Check with your service provider to ensure they offer this feature.
Speed Dialing
Speed dialing is a convenient feature that allows you to make phone calls quickly. A number key can be assigned to a specific phone number. By pressing and holding down a number key, your phone will recall the phone number associated from the Contact List and display it briefly while simultaneously dialing that phone number for you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable.
Quick Access to Convenient Features
30
Quick Access to Convenient Features
UX265_Eng_Ver1.1_manual_090618.qxd 6/19/09 11:22 AM Page 30
Loading...
+ 94 hidden pages