LG LGSBW41 Users manual

User Manual

PRODUCT NAME : WiFi / BT Combo Module

MODEL NAME : LGSBW41

The information contained herein is the exclusive property of LG Innotek

and shall not be distributed, reproduced or disclosed in whole or no in part

without prior written permission of LG Innotek.

(00)-0073

REG. DATE : 2013.09.24

MODEL NAME : LGSBW41

REV. DATE : 2013.09.24

User Manual

REV.NO : 1.0

PAGE :

Index

No Description Page

1 Features 2

2 Module Photo 2

3 Install Guide 3

4 Block Diagram 4

5 Absolute Maximum Ratings 4

6 Operating Conditions 5

7 Standard Test Conditions 5

8 Pin Description 6

1 / 10

9 Outline Drawing 7

10 Packing Information 8

REG. DATE : 2013.09.24



Security

WAPI, WEP, WPA, WPA2, WMM, AES, WEP, TKIP, CKP

MODEL NAME : LGSBW41

REV. DATE : 2013.09.24

User Manual

REV.NO : 1.0

PAGE :

2 / 10

1. Features

is the small size and low power module for IEEE 802.11a/b/g/n wireless LAN & BT4.0 +

HS. is based on Broadcom BCM43242 solution.

 IEEE 802.11 a/b/g/n Dual Band WLAN infrastructure

 Bluetooth 4.0 + HS ( Supports Low Energy(LE) )

 Size : 54.0mm x 34.0mm x 4.95mm

 Two stream spatial multiplexing up to 300Mbps

 Single-and dual-antenna Support

- Single antenna with shared LNA

- Simultaneous BT/WLAN receive with single antenna

 Use on-chip OTP (One-Time Programmable)

 Host Interface : USB (WiFi & BT)

 Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB

2. Module Photo

REG. DATE : 2013.09.24

MODEL NAME : LGSBW41

REV. DATE : 2013.09.24

User Manual

3. Install Guide

Cable is connected to the TV then inserted into the module.

Not an escape module, as shown below is mounted on the TV.

TV Rear Panel

REV.NO : 1.0

PAGE :

3 / 10

installed position

Cable

REG. DATE : 2013.09.24

Caution

: The specifications in Table 1 define levels at which permanent damage to the

REV. DATE : 2013.09.24

4. Block Diagram

User Manual

MODEL NAME : LGSBW41

REV.NO : 1.0

PAGE :

4 / 10

5. Absolute Maximum Ratings

device can occur. Function operation is not guaranteed under these conditions.

Operating at absolute maximum conditions for extend periods can adversely affect the

long-term reliability of the device.

Parameter Min Max Unit

Storage Temperature -10 +80

Storage Humidity (40℃)

. Other conditions

1) Do not use or store modules in the corrosive atmosphere, especially where chloride

gas, sulfide gas, acid, alkali, salt or the like are contained.

Also, avoid exposure to moisture.

2) Store the modules where the temperature

and relative humidity do not exceed 5 to 40℃ and 20 to 60%.

- 90 %

℃

3) Assemble the modules within 6 months.

Check the soldering ability in case of 6 months over.

+ 9 hidden pages