LG LGAX300 User Manual

ENGLISH

AX300

Please read this manual carefully before operating your mobile phone. Retain it for future reference.

USER GUIDE

P/N : MMBB027230 1(1.0)

Copyright ©2008 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.

Important Safety Precautions

Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than

-4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

Important Safety Precautions

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This

Important Safety Precautions

could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

Important Safety Precautions

Table of Contents

Important Safety Precautions

Table of Contents 4

Welcome 9

Technical Details 10

Table of Contents

FCC RF Exposure Information 12

Bodily Contact During Operation 12

Vehicle-Mounted the External Antenna 13

FCC Notice and Cautions 13

Phone Overview 14

Menus Overview 16

Getting Started with Your Phone 18

The Battery 18

Installing the Battery 18

Removing the Battery 18

Charging the Battery 18

Battery Charge Level 19

Turning the Phone On and Off 19

Turning the Phone On 19

Turning the Phone Off 19

Signal Strength 19

Screen Icons 20

Making Calls 20

Correcting Dialing Mistakes 21

Redialing Calls 21

Receiving Calls 21

Lock Mode 22

Mute Function 22

Volume Quick Adjustment 22

Call Waiting 22

Caller ID 23

Speed Dialing 23

Entering and Editing Information 24

Text Input 24

Key Functions 24

Contacts in Your Phone’s Memory 25

The Basics of Storing Contact Entries 25

Phone Numbers With Pauses 25

Storing a Number with Pauses 26

Adding a Pause to an Existing Number 26

Searching Your Phone’s Memory 27

Scrolling Through Your Contacts 27

Making a Call From Your Phone’s Memory 28

Using Phone Menus 30

Messaging 30

1. New Text Message 30

2. New Picture Message 32

3. Inbox 34

4. Sent 36

5. Drafts 37

6. Voicemail 38

7. Templates 38

8. Settings 39

9. Delete All 41

Axcess Shop 41

1. Axcess Shop 42

2. Axcess Info 43

Axcess Web 44

1. Start Browser 44

2. Web Messages 46

3. Web Settings 46

Multimedia 47

1. Take Photo 47

2. Record Voice 48

3. Images 48

4. Audios 49

5. Shuffle 50

Contacts 51

Table of Contents

1. New Contact 51

2. Contact List 51

3. My Circle 52

4. Groups 53

5. Speed Dials 53

6. My Name Card 54

Recent Calls 54

1. All Calls 54

2. Missed Calls 55

Table of Contents

3. Received Calls 55

4. Dialed Calls 55

5. Call Timer 55

6. Data 56

7. Data Counter 56

Bluetooth

1. Paired Devices 57

2. Power 58

3. My Visibility 58

4. My Bluetooth Name 59

5. My Bluetooth Info 59

Tools 60

1. Voice Command 60

2. My Menu 60

3. Alarm Clock 61

4. Calendar 61

5. Ez Tip Calc 62

6. Notepad 62

7. Calculator 63

8. World Clock 63

9. Stopwatch 63

0. Unit Converter 64

Settings 64

1. Sound 64

1.1 Ringers 64

1.2 Volume 65

1.3 Message Alerts 65

1.4 Alert Type 65

1.5 Service Alerts 66

1.6 Power On/Off Tone 66

1.7 Flip Tone 66

2. Display 67

2.1 Wallpaper 67

2.2 Banner 67

2.3 Backlight 68

2.4 Menu Style 68

2.5 Languages 68

2.6 Clocks & Calendar 68

2.7 Font Settings 69

3. Security 69

3.1 Lock Phone 69

3.2 Restrictions 70

3.3 Emergency #s 70

3.4 Change Lock Code 71

3.5 Reset Default 71

4. Call Settings 72

4.1 Answer Options 72

4.2 Auto Retry 72

4.3 One-Touch Dial 72

4.4 Voice Privacy 73

4.5 Auto Volume 73

4.6 Airplane Mode 73

4.7 TTY Mode 74

5. PC Connection 74

6. System 74

6.1 Network 74

6.2 Location 75

7. Memory 76

8. Software Update 76

9. Phone Info 76

Safety 77

TIA Safety Information 77

Exposure to Radio Frequency Signal 77

Antenna Care 77

Phone Operation 78

Tips on Efficient Operation 78

Driving 78

Electronic Devices 78

Pacemakers 78

Persons with pacemakers: 79

Hearing Aids 79

Other Medical Devices 79

Table of Contents

Health Care Facilities 79

Vehicles 80

Posted Facilities 80

Aircraft 80

Blasting Areas 80

Potentially Explosive Atmosphere 80

For Vehicles Equipped with an Air Bag 81

Safety Information 81

Table of Contents

Charger and Adapter Safety 81

Battery Information and Care 82

Explosion, Shock, and Fire Hazards 82

General Notice 83

Warning! Important safety information 84

Avoiding hearing damage 84

Using your phone safely 85

Avoiding hearing damage 85

Using headsets safely 86

FDA Consumer Update 86

10 Driver Safety Tips 96

Consumer Information on SAR 100

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices 103

Accessories 106

Limited Warranty Statement

10 7

Index 111

Some content in this user guide may differ from your phone depending on the phone software. Features and specifications are subject to change without prior notice.

Welcome

Thank you for choosing the AX300 cellular phone designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, this compact phone offers:



Celltop capability.



Slim and sleek design with internal antenna (Internal antenna described as antenna throughout this user guide).



Large, easy-to-read, 9-line backlit LCD with status icons.



Paging, messaging, voice mail, and caller ID.



23-key keypad.



Speakerphone feature.



Menu-driven interface with prompts for easy operation and configuration.



Any key answer, auto answer,

auto retry, one-touch and speed dialing with 99 memory locations.



Bilingual (English and Spanish) capabilities.



Bluetooth®wireless technology.

Note

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.

Important Information

This user’s guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty.

Welcome

Technical Details

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference

Technical Details

received, including interference that causes undesired operation.

Technical Details

The AX300 is a trimode phone that operates on both (Code Division Multiple Access CDMA) frequencies: cellular services at 800 MHz and (Personal Communication Services PCS) at

1.9 GHz.

CDMA technology uses a feature called DSSS (Direct Sequence

Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), and MS (Mobile Station).

* TSB-74: Protocol between an

IS-95A system and ANSI JSTD-008

1xRTT system receives twice as many subscribers in the wireless

section as IS-95. Its battery life is twice as long as IS-95. High-

speed data transmission is also possible.

CDMA Standard

Basic Air Interface

Network

Service

Performance

Designator

TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000 ANSI TIA/EIA 553A

TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124

TIA/EIA/IS-96-B TIA/EIA/IS-99 TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 TIA/EIA/IS-707-A

TIA/EIA/IS-97 TIA/EIA/IS-98 ANSI J-STD-018 ANSI J-STD-019 TIA/EIA/IS-125

Description

CDMA Dual Mode Air Interface

14.4kbps radio link protocol and interband operations IS-95 adapted for PCS frequency band cdma2000 1xRTT AirInterface

MAS-BS PCSC-RS Intersystem operations Non-signaling data comm.

Speech CODEC Async Data and Fax Short message service Packet Data Position Determination Service (gpsOne) High Speed Packet Data

Cellular base station Cellular mobile station PCS personal station PCS base station Speech CODEC

Technical Details

The following table lists some major CDMA standards.

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications Commission (FCC) of the United States, with

Technical Details

its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

Bodily Contact During Operation

This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Thirdparty belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain

0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.

Vehicle-Mounted the External Antenna

(Optional, if available.)

To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted the external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.

FCC Notice and Cautions

Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.

Don't use the phone with a damaged antenna. A damaged antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.

Technical Details

Phone Overview

1. Earpiece Lets you hear the caller.

2. LCD Screen Displays messages and indicator icons.

When the phone is turned on, Power Save mode automatically dims the screen and then darkens it if no keys are pressed.

3. Left Soft Key Use to access Celltop from standby

mode.

4. Speakerphone Key Use to turn Speakerphone

mode On or Off.

5. TALK Key Use to place or answer calls.

6. Alphanumeric Keypad Use to enter numbers and

characters and select menu items.

Lock Mode Key

standby mode press and hold for about 3 seconds).

8. Navigation Key Use for quick access to Contact List,

Ringers, Browser and Axcess Shop.

9. Right Soft Key Use to access Messaging from

standby mode.

10 .

Menu/OK Key

the bottom of the LCD between the Left and Right Soft Key functions.

11. BACK Key Deletes single spaces or characters with

a quick press, but press and hold to delete entire words. Will also back you out of menus, one level at a time.

12. PWR/END Key Use to turn the power on/off and

to end a call. Also returns to the main menu display screen.

13 .

Axcess Search Key

(from Standby Mode press and hold for about 3 seconds).

Use to lock the phone (from

Selects the function displayed at

Use to access Axcess Search

1. Earphone Jack Allows the use of a headset to hear

caller's voice.

2. Side Keys Use to adjust the ringer volume in

standby mode and the earpiece volume during a call.

3. Side Camera Key Use for quick access to Camera

function.

4. Charger Port Connects the phone to the battery

charger or other available accessories.

Charging with PC USB

You can use your computer to charge your phone. Connect one end of a USB cable to the charging accessory port on your phone and the other end to a highpower USB port on your PC (commonly located on the front panel of the computer). When charging with Hub, charge the phone with Hub Power.

Note

To charge the phone with PC USB, USB driver should be installed in advance. LG USB Driver supports Windows98SE, ME, 2000, XP and Vista. Driver may be downloadable from your service provider's website.

5. Camera Lens Use to take photos. Keep it clean for

optimal photo quality.

6. Speaker Allows you to hear voice through speaker.

Phone Overview

Menus Overview

Messaging

1. New Text Message

2. New Picture

3. Inbox

4. Sent

5. Drafts

6. Voicemail

7. Templates

8. Settings

Menus Overview

9. Delete All

Axcess Shop

1. Axcess Shop

2. Axcess Info

Message

1. All Messages

2. Text Message

3. Picture Message

4. Edit Voicemail#

1. Delete Inbox

2. Delete Sent

3. Delete Drafts

4. Delete All Messages

Axcess Web

1. Start Browser

2. Web Messages

3. Web Settings

Multimedia

1. Take Photo

2. Record Voice

3. Images

4. Audios

5. Shuffle

Contacts

1. New Contact

2. Contact List

3. My Circle

4. Groups

5. Speed Dials

6. My Name Card

Recent Calls

1. All Calls

2. Missed Calls

3. Received Calls

4. Dialed Calls

5. Call Timer

1. Last Call

2. Home Calls

3. Roam Calls

4. All Calls

6. Data

7. Data Counter

1. Received Data

2. Sent Data

3. All Data

Bluetooth

1. Paired Devices

2. Power

3. My Visibility

4. My Bluetooth Name

5. My Bluetooth Info

Tools

1. Voice Command

2. My Menu

3. Alarm Clock

4. Calendar

5. Ez Tip Calc

6. Notepad

7. Calculator

8. World Clock

9. Stopwatch

0. Unit Converter

Settings

1. Sound

1. Ringers

2. Volume

3. Message Alerts

4. Alert Type

5. Service Alerts

6. Power On/Off Tone

7. Flip Tone

2. Display

1. Wallpaper

2. Banner

3. Backlight

4. Menu Style

5. Languages

6. Clocks & Calendar

7. Font Settings

3. Security

1. Lock Phone

2. Restrictions

3. Emergency #s

4. Change Lock Code

5. Reset Default

4. Call Settings

1. Answer Options

2. Auto Retry

3. One-Touch Dial

4. Voice Privacy

5. Auto Volume

6. Airplane Mode

7. TTY Mode

5. PC Connection

6. System

7. Memory

1. Reserved Memory

2. Multimedia

8. Software Update

9. Phone Info

Menu Access

Press Menu from standby mode to access nine phone menus. There are two methods of accessing menus and submenus:



Use the navigation key to highlight and select, or



Press the number key that corresponds with the menu (or submenu).

Menus Overview

Getting Started with Your Phone

The Battery

Note

It is important to fully charge the battery before initial use of the phone.

Getting Started with Your Phone

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

Remove the battery cover by sliding it downward followed by the arrow indicator. Align the battery with the terminals near the top of the phone. Align the battery cover then slide it to the right side until it clicks into place.

Removing the Battery

Turn the phone off. Slide the battery cover to left side and remove it. Use the opening near the top of the battery to lift the battery out.

Charging the Battery

To use the charger provided with your phone:

Warning! Use only the charger provided with the phone. Using any charger other than the one included with the AX300 may damage your phone or battery.

Notice

Please make sure that the LG logo faces down before inserting a charger, data cable, etc into the charger port of your phone.

1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet.

2. The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and

displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external power source.

2. Press for about 3 seconds until the LCD screen lights up.

Turning the Phone Off

1. Press and hold until the display turns off.

Signal Strength

Call quality depends on the signal strength in your area. The

Getting Started with Your Phone

signal strength is indicated on the screen as the number of bars next to the signal strength icon

-- the more bars, the better the signal strength. If the signal quality is poor, move to an open

Getting Started with Your Phone

area. If you are in a building, the reception may be better near a window.

Note

The call quality is also affected by your location, and weather conditions that cause RF emission changes.

Screen Icons

To see the icon glossary, go to

Settings

Icon Glossary

Making Calls

1. Make sure the phone is

turned on. If not, press for about 3 seconds.

Phone Info

on your phone.

2. Enter the phone number (include the area code if needed).

3. Press .

lf the phone is locked, enter the lock code (the last 4 digits of your phone number by default and it's changeable in Settings menu).

Note

If the phone is restricted, you can

only dial phone numbers saved in

the Emergency Numbers or your

Contact List. To turn off this

function:

Settings

Security

Lock Code Restrictions

4. Press to end the call.

None

Calls

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press once to erase the last digit entered, or hold down for at least 2 seconds to return to standby mode.

Redialing Calls

1. Press twice to redial the last number you dialed. The last 120 numbers (missed, received, dialed) are stored in the call history list and you can also select any of these to redial.

Receiving Calls

1. When the phone rings or vibrates, press to answer.

Tip

To choose answer options:

Settings

Answer Options

following options:

Flip Open/ Any Key/ Send Key Only/ Auto Answer

Note

If you press or (the side keys), while the phone is ringing, the ringing or vibration is muted for that call.

Call

. Choose from the

2. Press twice to end the call.

Getting Started with Your Phone

Quick Access to Convenient Features

Lock Mode

Sets your phone to require a 4digit password in order to use the phone.

Quick Access to Convenient Features

Note

Until you change it, the default lock code/password is the last 4 digits of your phone number.

To quickly lock your phone press

for three seconds. To

cancel, press Left Soft Key Unlock, enter the password and press .

Mute Function

The Mute Function is used during a phone call. To quickly activate Mute press Left Soft Key Mute, then to cancel press Left Soft Key Unmute.

Volume Quick Adjustment

Use the side keys to adjust the ringer volume while in standby mode, and the earpiece volume during a phone call. The upper key increases the volume and the lower key decreases the volume.

Note

Keypad Volume is adjusted through the Sound Volume menu:

Menu Sound Keypad

Settings -

Volume -

> >

Call Waiting

Your cellular service may offer call waiting. While a call is in progress, two beeps indicate another incoming call. When call waiting is enabled, you may put the active call on hold while you answer the other incoming call. Check with your cellular service provider for information about

this function.

1. Press to receive a waiting call.

2. Press again to switch between calls.

Caller ID

Caller ID displays the phone number or name of the incoming call. If the caller’s identity is stored in Contacts, the name will appear along with the phone number. Check with your service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you to make phone calls quickly. A number key can be assigned to a specific phone number. By pressing and holding down a number key, your phone will recall the phone number associated from the

Contact List and display it briefly while simultaneously dialing that phone number for you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable.

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number.

Enter the Speed Dial number and press .

Dialing Double Digit Speed Dials (from 10 to 99)

Press the first digit and then press and hold the key of the second digit.

Enter the first and second

Quick Access to Convenient Features

Entering and Editing Information

digits and press .

Text Input

You can enter text into and edit your Banner, Calendar, Contacts,

Entering and Editing Information

Alarm Clock, Notepad, and Messages.

Key Functions

Left Soft Key: Press to scroll through the following text input modes: T9Word

(T9WORD/T9Word/ T9word) -> Abc (ABC/Abc/abc) -> 123 -> Symbols

Shift: Press to change

capitalization.

T9 text : T9Word -> T9WORD -> T9word Abc text : Abc -> ABC -> abc

Next: In T9 mode, press

to display other matching words.

Space: Press to complete a word and insert a space.

Clear: Press to delete a single space or character. Hold to delete the whole message.

Punctuation: In T9 mode, press to insert punctuation in a word and complete a sentence.

Contacts in Your Phone’s Memory

The Basics of Storing Contact Entries

1. From standby mode enter the phone number you want to save (up to 32 digits).

2. Press Left Soft Key Save.

3. Select either Save New or Update Existing.

4. Use to highlight a Label and press .

Mobile 1/ Home/ Work Mobile 2/ Fax

Note

Use

Update Existing

another phone number to a contact already stored in memory.

5. Enter a name for the phone number (up to 22 characters) and press . A confirmation message is displayed briefly.

to add

Phone Numbers With Pauses

When you call automated systems, such as voice mail or credit billing numbers, you often have to enter a series of numbers to navigate through the system. Instead of entering these numbers by hand, you can store the numbers in your Contacts separated by special pause characters (W, P). There are two different types of pauses you can use when storing a number:

Wait (W)

The phone stops dialing until you press Left Soft Key

Release

to advance to the next

number.

Pause (P)

The phone waits 2 seconds before sending the next string of digits.

Contacts in Your Phone’s Memory

Storing a Number with Pauses

1. Press

2. Press

3. Press

Contacts in Your Phone’s Memory

4. Enter a name (up to 22 characters) and enter a number.

5. Press Right Soft Key

Contacts

New Contact

Options.

6. Press

Pause

7. Enter additional number(s) then press .

Wa it

Adding a Pause to an Existing

Number

1. Press display your Contacts

alphabetically.

2. Use to highlight the Contact entry to edit, then press .

3. Press Left Soft Key

4. Use to highlight the number.

5. Press Right Soft Key

Options

6. Press

Pause

7. Enter additional number(s), then press .

Contact List

Wa it

Edit

Searching Your Phone’s Memory

The AX300 phone is able to perform a dynamic search of the contents in your phone’s memory. A dynamic search compares entered letters or numbers against the entries in your Contacts. A matching list is displayed in descending order. You can then select a number from the list to call or edit.

Scrolling Through Your Contacts

1. Press display your Contacts alphabetically.

2. Use to scroll through the list.

Contact List

Searching by Letter

1. Press display your Contacts alphabetically.

2. Press (or press repeatedly) the key on the keypad that corresponds with the search letter.

Accessing Options

1. Press

2. Use to highlight a Contact entry and press Right Soft Key

3. Select the option you want to access (use then press , or press the corresponding number on the keypad):

Contact List

Options

Send Message

Text Message or Picture Message to the selected contact.

: Send a

Contacts in Your Phone’s Memory

Delete

: Delete the selected

entry from your Contacts.

Edit

: Edit the selected

contact information.

Delete Multiple

Selective/ All

from

: Choose

to delete multiple entries at one time.

Send via Bluetooth

a contact(vCard) via

Bluetooth Bluetooth

on, a notice pops up to

Bluetooth

turn

: Send

. In case

power is not

on.

Set Speed Dial/ Remove Speed Dial

: Set a speed dial or remove the speed dial.

Set As My Circle/ Remove My Circle

: Add the selected number to My Circle, or remove from My Circle.

Making a Call From Your Phone’s Memory

Once you have stored phone numbers in your Contacts, you can place calls to those numbers quickly and easily.



By pressing Send Key after searching for a phone number in Contacts or Recent Calls and highlighting it.



By using Speed Dialing.

From Contacts

1. Press display your Contacts.

2. Use to highlight the Contact entry, then press .

3. Use to highlight the phone number.

4. Press to place the call.

Contact List

+ 85 hidden pages

LG LGAX300 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual