LG LG840 User Manual [en, es]

Spyder II

Guárdelo para consultarlo en el futuro. Lea este manual cuidadosamente antes de utilizar su teléfono.

ENGLISH

MANUAL DEL USUARIO

ESPAÑOL

Spyder II

USER GUIDE

Spyder II

Please read this manual carefully before operating your mobile phone. Retain it for future reference.

USER GUIDE

P/N : MMBB0343601(1.1) LG840

Printed in Korea

Copyright ©2010 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.

Important Safety Precautions

Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than

-4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

Important Safety Precautions

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This

Important Safety Precautions

could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

Important Safety Precautions

Important Safety Precautions 1

Table of Contents 4

Welcome 9

Technical Details 10

FCC RF Exposure Information 12

Bodily Contact During Operation 12

Vehicle-Mounted the External

Table of Contents

Antenna 13

FCC Notice and Cautions 13

Caution 14

Part 15.19 statement 14

Part 15.21 statement 14

Part 15.105 statement 15

Phone Overview 16

Menus Overview 21

Getting Started with Your Phone 25

The Battery 25

Charging the Battery 25

Battery Charge Level 26

Turning the Phone On and Off 26

Signal Strength 27

Screen Icons 27

Making Calls 27

Correcting Dialing Mistakes 28

Redialing Calls 28

Receiving Calls 28

Quick Access to Convenient Features 29

Lock Mode 29

Speaker Phone Function 29

Volume Quick Adjustment 29

Call Waiting 29

Caller ID 30

Speed Dialing 30

Entering and Editing Information 31

Contacts in Your Phone’s Memory 32

The Basics of Storing Contacts Entries 32

Phone Numbers With Pauses 32

Searching Your Phone’s Memory 34

Accessing Options 34

Making a Call From Your Phone’s Memory 35

Using Phone Menus 36

Contacts 36

1. New Contact 36

2. Contact List 37

3. Speed Dials 37

4. Groups 38

5. My Name Card 38

Recent Calls 39

1. Missed Calls 39

2. Received Calls 40

3. Dialed Calls 40

4. All Calls 40

5. Call Timer 40

6. Data 41

7. Data Counter 41

Messaging 41

1. New Text Message 41

2. New Media Message 43

3. Inbox 45

4. Outbox 46

5. Drafts 47

6. Voicemail 48

7. Templates 48

8. Delete All 48

Speed Dials 49

New Text Message 49

New Media Message 49

BREW 49

1. BREW Apps 50

Web 51

Start Browser 51

Take Photo 59

Record Video 60

Record Voice 62

Music 62

Table of Contents

1. Now Playing/ Recently Played 63

2. All Songs 63

3. Artists 64

4. Albums 64

5. Genres 64

6. My Playlists 64

7. Settings 65

7. 1 Repeat 65

7. 2 Shuffle 65

Table of Contents

7. 3 Background Music 65

My Playlists 65

My Stuff 66

1.3 Missed Calls 68

1.4 Messages 68

1.5 Time & Date 68

1.6 Help 68

2. Command Mode 69

3. Announce Alert 69

4. Train Word 69

5. Best Match 70

Alarm Clock 70

Organizer 71

1. Calendar 71

2. Date Finder 71

World Clock 71

Documents66

Tools 72

Games66

Voice Command 67

1. Start Command 67

1.1 Call <Name> or <Number> 67

1.2 Voicemail 67

1. Calculator 72

2. Ez Tip Calculator 73

3. Unit Converter 74

Stopwatch 74

Drawing Panel 75

Notepad 75

Sound 76

1. Ringers 76

2. Volume 77

3. Message Alerts 77

4. Alert Type 77

5. Service Alerts 78

6. Power On/Off Tones 78

7. Slide Tone 79

Display 79

1. Wallpaper 79

1.1 Screen 79

1.2 Shuffle 80

2. Banner 80

3. Backlight 80

4. Brightness 81

5. Menu Style 81

6. Languages 81

7. Clock & Calendar 82

8. Font Settings 82

9. Name Match for Dialing 83

Touch 83

1. Touchscreen Calibration 83

2. Touchscreen Effect 83

3. Thumbpad Effect 84

Bluetooth

1. Power 85

2. Add New 86

3. Paired Devices 87

4. Settings 87

4.1 My Visibility 87

4.2 Device Name 87

4.3 My Bluetooth Info 88

Table of Contents

System 88

1. Network 88

1.1 System Select 88

1.2 Set NAM 88

1.3 Auto NAM 89

1.4 Serving System 89

2. Location 89

Phone Settings 90

1. Power Save 90

2. Auto Lock 90

3. Security90

Table of Contents

3.1 Lock Phone 90

3.2 Restrictions 91

3.3 Emergency Numbers 92

3.4 Change Lock Code 92

4. Memory 92

5. USB Connection Mode 93

6. Phone Info 93

6.1 My Number 94

6.2 ESN/MEID 94

6.3 Icon Glossary 94

Table of Contents

6.4 Version 94

7. BREW & Web 95

7. 1 BREW Access Prompt 95

7.2. Web Settings 95

8. Reset Settings 96

Call Settings 96

1. Answer Options 96

2. Auto Retry 97

3. One-Touch Dial 97

4. Voice Privacy 98

5. Auto Volume 98

6. Airplane Mode 99

7. TTY Mode 99

Message Settings 100

1. All Messages 100

2. Text Messages 101

3. Media Messages 101

4. Voicemail Number 101

Safety 102

TIA Safety Information 102 Safety Information 106 Warning! Important safety

information 110 FDA Consumer Update 112 10 Driver Safety Tips 122 Consumer Information on

SAR 126 FCC Hearing-Aid Compatibility

(HAC) Regulations for Wireless Devices 129

Accessories 132

Limited Warranty Statement 133

Index 137

Thank you for choosing the

Spyder II

cellular phone designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this compact phone offers:

Music capability and microSD

™

card slot.

Significantly enhanced voice

clarity

Slim and sleek design with internal antenna (Internal antenna described as antenna throughout this user guide).

Large, easy-to-read, 9-line backlit LCD with status icons.

Paging, messaging, voice mail, and caller ID.

8 physical keys, a Touch Screen and a full QWERTY keypad.

Welcome

Speakerphone feature.

3.0 Mega pixels camera

Menu-driven interface with prompts for easy operation and configuration.

Any key answer, auto answer, auto retry, one-touch and speed dialing with 99 memory locations.

Bilingual (English and Spanish) capabilities.

Bluetooth®wireless technology.

Note

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.

Welcome

Technical Details

Important Information

This user’s guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty.

Technical Details

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation.

Technical Details

The

Spyder II

phone that operates on both Code Division Multiple Access (CDMA) frequencies: Cellular services at 800 MHz and Personal Communication Services (PCS) at

1.9 GHz.

CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), and MS (Mobile Station).

is an all digital

* TSB-74: Protocol between an IS-

95A system and ANSI J-STD008

Its battery life is twice as long as IS-95. High-speed data

transmission is also possible. The following tab lists some

major CDMA standards.

CDMA Standard

Basic Air Interface

Network

Service

1x EV-DO

Related interface

Designator

TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000

TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124

TIA/EIA/IS-96-B TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 TIA/EIA/IS-707-A

TIA/EIA/IS-856 TIA/EIA/IS-878

TIA/EIA/IS-866

TIA/EIA/IS-890

Description

CDMA Dual-Mode Air Interface

14.4kbps radio link protocol and interband operations IS-95 adapted for PCS frequency band CDMA2000 1xRTT Air Interface

MAS-BS PCSC-RS Intersystem operations Non-signaling data comm.

Speech CODEC Short Message Service Packet Data Position Determination Service (gpsOne) High Speed Packet Data

CDMA2000 High Rate Packet Data Air Interface

1xEV-DO Inter-Operability Specification for CDMA2000 Access Network Interfaces

Recommended Minimum Performance Standards for CDMA2000 High Rate Packet Data Access Terminal Test Application Specification (TAS) for High Rate Packet Data Air Interface

Technical Details

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for

Technical Details

human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

Bodily Contact During Operation

This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Thirdparty belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain

0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.

Vehicle-Mounted the External Antenna

(Optional, if available.)

To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted the external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.

FCC Notice and Cautions

Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.

Don't use the phone with a damaged antenna. A damaged antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.

Technical Details

Welcome

Caution

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin a minor burn may result. Contact your local dealer for a replacement antenna.

Welcome

Part 15.19 statement

This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:

(1) This device & its accessories

may not cause harmful interference.

(2) This device & its accessories

must accept any interference received, including interference that may cause undesired operation.

Part 15.21 statement

Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Welcome

Phone Overview

1.Earphone Jack Allows the use of a headset to

hear caller's voice.

2.Proximity Sensor

to this sensor during a call, LCD turns off allowing you to only adjust volume or end the call so that you don't inadvertently activate a feature.

3 Earpiece Lets you hear the caller.

4. Slide Slide open to access the Alphanumeric

keyboard (QWERTY).

5.LCD Screen Displays incoming calls, messages

and indicator icons as well as viewing a wide variety of content you select to view.

6.TALK Key Use to place or answer calls. You can

also press to access your most Recent Calls.

7. BACK Key

with a quick press, but press and hold to delete entire words. Will also back you out of menus, one level at a time.

8.Thumbpad Use as a mouse when browsing the

internet, or use to scroll through menu options.

9.PWR/END Key Use to turn the power on/off

and to end a call. Also returns to standby mode.

10.

Microphone

11. Alphanumeric Keypad Use to enter numbers

and characters and select menu items.

12.

Camera Lens

video. Keep it clean for optimal photo quality.

13.

Speaker

music and video in speakerphone mode.

When close (within 2-3 cm)

Deletes single spaces or characters

Lets callers hear you.

Used to take photos and record

Lets you hear the caller's voice,

microSD™card slot

(accommodates optional

™

microSD

card up to

Insert microSD

™

card. To access

™

card slot

™

16GB.)

card for external memory. Use LG-approved microSD the microSD you must remove the side cover located on the side of your phone.

1.Side Camera Key Use for quick

access to Camera and Video functions.

2.Side Volume Keys Use to adjust the

ringer volume in standby mode and the earpiece volume during a call.

3.HOLD Key Use to lock your phone

when the slide is closed. To unlock, press

()or open the slide.

4.Charger Port Connects the phone

to the battery charger or other available accessories.

Touch Sensitive Soft Keys

( , , , )

1. Make sure your hands are clean and dry. Remove moisture from the surface of your hands. Don't use the touch keys in a humid environment.

2. Touch key sensors are sensitive to your light touch. You don't need to press them forcefully to use them. Protect

your phone from severe impact because touch key sensors may become damaged from harsh use.

3. Use the tip of your finger to touch the center of a touch key. If you touch off-center it may activate the nearby function instead.

4. The touch sensor level can be adjusted to your preference.

Phone Overview

5. When the LCD screen is off, touch keys are deactivated. Press the Unlock Key ( ) to turn on the Touch Screen and touch key.

6. The Screen Lock feature protects against accidental key presses during phone calls with the flip closed.

7. Keep metal and other

Phone Overview

conductive material away from the surface of touch keys because contact may cause electronic interference.

WARNING

Do not put heavy objects on the Touch Screen.

Do not sit on your phone because it may damage the Touch Screen.

Do not drag or scratch your phone with any sharp materials.

Do not keep your phone in extreme conditions (places that are too humid, hot, or cold).

Keep chemicals away from your phone because they may change the cosmetic or functional features of your phone.

The Touch Screen is a great way to interact with the

Spyder II

’s software. Take a little time to become accustomed to using it. If it doesn’t react as you expect, adjust the Touch Screen calibration.

TIP

Keep in mind that the smaller the text appears on the screen, the smaller the area of touch activation. Try zooming the screen in, if available, to increase the touch area.

Standby Mode Home Screens

Customize your Touch Screen to have instant access to features you want to keep as close as a single finger touch.

The

Spyder II

has four Standby Mode Home Screens for quick, direct

access to several frequently used device features.

Main:

Displays your Clock and/or Calendar. Customize your

preferences through the Display Settings menu.

Widget:

Customize for quick access to Widgets, My Menu items, and

Bookmarks.

Contacts:

Displays favorite Contacts. Touch the contact and add a

photo, make call, send message, view contact or to delete it.

Multimedia:

Displays favorite images, music and videos so you can

show them off at a moment’s notice without having to search.

Phone Overview

Set the features and items you want on each home screen and even display different backgrounds for each one.

Main MultimediaWidget

Phone Overview

1.Message Displays the Messaging Menu.

2.Call Displays the Dialing Touchpad.

3.Menu Displays the Main Menu.

4.Contacts Displays your Contact List.

Contacts

New Contact Contact List Speed Dials Groups My Name Card

Recent Calls

Missed Calls Received Calls

Dialed Calls All Calls Call Timer Data Data Counter

Messaging

New Text Message New Media Message Inbox

Outbox Drafts Voicemail Templates Delete All

Delete Inbox Delete Outbox Delete Drafts Delete All

Messages

Speed Dials

New Text Message

New Media Message

BREW

Web

Menus Overview

Take Photo

Record Video

Record Voice

Music

Now Playing/ Recently Played

All Songs Artists Albums Genres My Playlists Settings

Repeat Shuffle Background Music

Menus Overview

My Playlists

My Stuff

Images Videos Audios Documents

Documents

Games

Voice Command

Start Command Command Mode Announce Alert Train Word Best Match

Alarm Clock

Organizer

Calendar Date Finder

World Clock

Tools

Calculator Ez Tip Calculator Unit Converter

Stopwatch

Drawing Panel

Notepad

Sound

Ringers

All Calls

Caller ID

No Caller ID

Restricted Calls

Shuffle

Volume

Master Volume

Keypad

Earpiece

Speaker

Message Alerts

Text Message

Media Message

Voicemail

All Messages

Message Reminder

Alert Type

Call Alert

Message Alert

Schedule Alert

Alarm Alert

Service Alerts

Minute Beep

Call Connect

Low Battery

Power On/Off Tones

Slide Tone

Display

Wallpaper

Screen

Main

Widget

Contacts

Multimedia

Lock Screen

Shuffle

Screen

Repeat

Banner

Backlight

Display

Keypad

Brightness

Auto Brightness

Brightness Level

Menu Style

Languages

Clock & Calendar

Font Settings

Font Type

Dial Font Size

Name Match for Dialing

Touch

Touchscreen Calibration

Touchscreen Effect

Thumbpad Effect

Thumbpad Calibration

Thumbpad Sensitivity

Bluetooth

System

Network Location

Phone Settings

Power Save Auto Lock Security

Lock Phone Restrictions Emergency

Numbers Change Lock Code

Memory

Handset Common Memory

Menus Overview

Handset Reserved Memory

External Memory Primary Storage

Setting

Images Videos Audios Documents

USB Connection Mode

Phone Info

My Number ESN/MEID Icon Glossary Version

BREW & Web

BREW Access Prompt

Web settings

Reset Settings

Call Settings

Answer Options

Auto Retry

One-Touch Dial

Voice Privacy

Auto Volume

Airplane Mode

TTY Mode

Menu Access

Touch the MENU Touch Key to have access to phone menus. To access the MENU, unlock first by pressing down the unlock key on the left side of your phone. To go back to standby mode, touch

or press at the bottom center of your phone.

Message Settings

All Messages

Auto Save Auto Delete Entry Mode Signature Speed Messaging

Text Messages

Auto View Auto Play Callback Number Delivery Receipt

Media messages

Auto Receive

Voicemail Number

Getting Started with Your Phone

The Battery

Note

It is important to fully charge the battery before initial use of the phone.

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

Insert the bottom of the battery into the opening on the back of the phone, then push the battery down until it snaps into place.

Removing the Battery

Turn power off. Slide the battery cover up, then pull the bottom side of the battery up to remove it.

Charging the Battery

Your

Spyder II

with a cableless travel adapter and a USB data cable which are connected together to charge your phone. To charge your phone:

Note

Please use only an approved charging accessory to charge your LG phone. Improper handling of the charging port, as well as the use of an incompatible charger, may cause damage to your phone and void the warranty.

Connect the cableless wall

1. adapter and USB data cable. When connecting as shown below, the LG logo on the USB cable should face toward you.

device comes

Getting Start ed with Your Phone

Getting Started with Your Phone

2. Gently uncover the accessory charging port, then plug the end of the AC adapter into the phone’s charger port and

Getting Start ed with Your Phone

the other end into an electrical outlet.

Notice

Please make sure that the 'B' Side faces up before inserting a charger or data cable into the charger port of your phone

3. The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge

level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external power source.

2. Press for about 3 seconds until the LCD screen lights up.

Turning the Phone Off

1. Press and hold until the display turns off.

Signal Strength

Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon

. The more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window.

Screen Icons

To see the icon glossary, touch

Settings

Phone Settings Icon Glossary

Phone Info ->

on your phone.

Making Calls

lf the phone is locked, press the Unlock Key on the left side of your phone.

1. Touch and touch the phone number (include the area code if needed).

2. Press or touch .

Note

If the phone is restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contact List. To turn off this function:

Menu -> Settings -> Phone Settings -> Security -> Restrictions -> Outgoing Calls -> Allow All.

3. Press to end the call.

Getting Start ed with Your Phone

Getting Started with Your Phone

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press or touch once to erase the last digit entered, or

Getting Start ed with Your Phone

hold down or touch and hold for at least 2 seconds to go to standby mode.

Redialing Calls

1. Press twice to redial the last number you dialed. The last 150 numbers (dialing, incoming, missed) are stored in the call history list and you can also select any of these to redial.

Receiving Calls

1. When the phone rings or vibrates, press to answer.

Tip

Call Settings Menu allows you to choose answer options:

Slide Open/ Any Key/ TALK Key Only/ Auto Answer

Note

If you press or (the side keys), while the phone is ringing, the ringing or vibration is muted for that call.

2. Press to end the call.

+ 263 hidden pages