LG
Floor Standing-Type
Air Conditioner
OWNER'S MANUAL
LG
IMPORTANT
• Please read this owner's manual carefully and thoroughly
before installing and operating your air conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
website http://www.lgservice.com
ITALIANO ESPAÑOL FRANÇAIS DEUTSCH
ENGLISH FRANÇAIS ESPAÑOL
2 Floor Standing-Type Air Conditioner
Floor Standing- Type Air Conditioner Owner’s Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
■
Staple your receipt to this page in the event you need it
to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for
service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
• Installation work must be performed in accordance
with the National Electric Code by qualified and
authorized personnel only.
Safety Precautions.................3
Operating Instructions...........9
Care and Maintenance .........24
Before you call
for service .............................26
Celsius(°C) ↔ Fahrenheit (°F)
Convert Table .......................27
Safety Precautions
Owner's Manual 3
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
■ Meanings of symbols used in this manual are as shown below.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
Be sure not to do.
Be sure to follow the instruction.
WARNING
■ Installation
Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.
• There is risk of fire or electric
shock.
For electrical work, contact
the dealer, seller, a qualified
electrician, or an Authorized
Service Center.
• Do not disassemble or repair the
product. There is risk of fire or
electric shock.
Always ground the product.
• There is risk of fire or electric
shock.
Install the panel and the
cover of control box
securely.
• There is risk of fire or electric
shock.
Always install a dedicated
circuit and breaker.
• Improper wiring or installation
may cause fire or electric shock
Use the correctly rated
breaker or fuse.
• There is risk of fire or electric
shock.
WARNING
CAUTION
Safety Precautions
4 Floor Standing-Type Air Conditioner
■ Operation
Do not modify or extend the
power cable.
• There is risk of fire or electric
shock.
Do not install, remove, or reinstall the unit by yourself
(customer).
• There is risk of fire, electric
shock, explosion, or injury.
Be cautious when unpacking
and installing the product.
• Sharp edges could cause injury.
Be especially careful of the case
edges and the fins on the
condenser and evaporator.
For installation, always contact the
dealer or an Authorized Service Center.
• There is risk of fire, electric
shock, explosion, or injury.
Do not install the product on a
defective installation stand.
• It may cause injury, accident, or
damage to the product.
Be sure the installation area
does not deteriorate with age.
• If the base collapses, the air
conditioner could fall with it,
causing property damage,
product failure, and personal
injury.
Do not plug or unplug the
power supply plug during
operation.
• There is risk of fire or electric
shock.
Do not touch(operate) the
product with wet hands.
• There is risk of fire or electrical
shock.
Do not place a heater or
other appliances near the
power cable.
• There is risk of fire and electric
shock.
Do not let the air conditioner run for a
long time when the humidity is very high
and a door or a window is left open
.
• Moisture may condense and wet
or damage furniture.
Take care to ensure that power
cable could not be pulled out or
damaged during operation.
• There is risk of fire or electric
shock.
Do not place anything on the
power cable.
• There is risk of fire or electric
shock.
Safety Precautions
Owner's Manual 5
Do not allow water to run
into electric parts.
• It may cause There is risk of fire,
failure of the product, or electric
shock.
Do not store or use flammable
gas or combustibles near the
product.
• There is risk of fire or failure of
product.
Do not use the product in a
tightly closed space for a
long time.
• Oxygen deficiency could occur.
When flammable gas leaks,
turn off the gas and open a
window for ventilation
before turn the product on.
• Do not use the telephone or turn
switches on or off.
There is risk of explosion or fire
If strange sounds, or small or
smoke comes from product. Turn
the breaker off or disconnect the
power supply cable.
• There is risk of electric shock or
fire.
Stop operation and close the window
in storm or hurricane. If possible,
remove the product from the window
before the hurricane arrives.
• There is risk of property damage,
failure of product, or electric shock.
Do not open the inlet grill of the
product during operation.
(Do not touch the electrostatic
filter, if the unit is so equipped.)
• There is risk of physical injury,
electric shock, or product failure.
When the product is soaked
(flooded or submerged),
contact an Authorized
Service Center.
• There is risk of fire or electric
shock.
Be cautious that water could
not enter the product.
• There is risk of fire, electric shock,
or product damage.
Ventilate the product from time to time when
operating it together with a stove, etc.
• There is risk of fire or electric shock.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of electric shock.
Gasolin
Safety Precautions
6 Floor Standing-Type Air Conditioner
■ Installation
CAUTION
■ Operation
Always check for gas
(refrigerant) leakage after
installation or repair of product.
• Low refrigerant levels may cause
failure of product.
Install the drain hose to
ensure that water is drained
away properly.
• A bad connection may cause
water leakage.
Keep level even when
installing the product.
• To avoid vibration or water
leakage.
Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.
• It may cause a problem for your
neighbors.
Use two or more people to
lift and transport the
product.
• Avoid personal injury.
Do not install the product where
it will be exposed to sea wind
(salt spray) directly.
• It may cause corrosion on the
product. Corrosion, particularly on
the condenser and evaporator fins,
could cause product malfunction or
inefficient operation.
When the product is not be used for a long
time, disconnect the power supply plug or
turn off the breaker.
• There is risk of product damage or failure, or
unintended operation.
Take care to ensure that nobody could step
on or fall onto the outdoor unit.
• This could result in personal injury and product
damage.
Do not expose the skin directly to cool air for
long periods of time.
(Don't sit in the draft.)
• This could harm to your health.
Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system.
• There is risk of
damage or
loss of property.
90˚
Safety Precautions
Owner's Manual 7
ENGLISH
Do not block the inlet or
outlet of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
• There is risk of fire, electric shock,
or damage to the plastic parts of
the product.
Do not touch the metal parts of
the product when removing the
air filter. They are very sharp!
• There is risk of personal injury.
Do not step on or put
anyting on the product.
(outdoor units)
• There is risk of personal injury
and failure of product.
Always insert the filter securely.
Clean the filter every two weeks
or more often if necessary.
• A dirty filter reduces the efficiency
of the air conditioner and could
cause product malfunction or
damage.
Do not insert hands or other
objects through the air inlet or
outlet while the product is operated.
• There are sharp and moving parts
that could cause personal injury.
Do not drink the water
drained from the product.
• It is not sanitary and could cause
serious health issues.
Use a firm stool or ladder
when cleaning or
maintaining the product.
• Be careful and avoid personal
injury.
Replace the all batteries in the
remote control with new ones of
the same type. Do not mix old
and new batteries or different
types of batteries.
• There is risk of fire or explosion
Do not recharge or
disassemble the batteries.
Do not dispose of batteries
in a fire.
• They may burn or explode.
If the liquid from the batteries gets
onto your skin or clothes, wash it
well with clean water. Do not use the
remote if the batteries have leaked.
•
The chemicals in batteries could
cause burns or other health hazards.
If you eat the liquid from the
batteries, brush your teeth and
see doctor. Do not use the remote
if the batteries have leaked.
•
The chemicals in batteries could
cause burns or other health hazards.
Thinner
Wax
Prior to Operation
8 Floor Standing-Type Air Conditioner
Prior to Operation
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/unplugging the power cord.
6. If the cord/plug is damaged, replace it with only an authorized replacement part.
1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose
occupants, pets, or plants to direct airflow for a long time.
2. Due to the possibility of oxygen deficiency, ventilate the room when using the appliance together with
stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purpose (e.g. preserving precision devices,
food, pets, plants, or art objects). Such use may damage your properties.
1. Do not touch the metal parts of the unit when removing the filter. Injury can occur.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
leading to electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a
very high speed during operation. There is a possibility of injury if the unit’s power is triggered while
cleaning inner parts of the unit.
For repair and maintenance, contact your authorized service dealer.
Preparing for Operation
Usage
Cleaning and Maintenance
Service
Introduction
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the
air conditioner.
This symbol indicates special notes.
NOTICE
Symbols used in this Manual
Owner's Manual 9
ENGLISH
Operating Instructions
Operating Instructions
Features and Specifications
Air Intake Vent
(Rear)
Air Outlet
Vent
Piping
Air Outlet Vent
Remote Signal
Receptor
Air Intake Vent
1. Design for cooling
2. Super energy efficiency
3. Micom control
4. Whisper quiet operation
5. Wireless remote control
6. 3 cooling speeds
7. Removable air filter
8. Anti-Bacteria filter
9. 3 minutes delay circuit
10 Floor Standing-Type Air Conditioner
56 12
411
7 9
108
3
Operating Instructions
Indoor Unit Controls and Indicators
1. START/STOP BUTTON
Operation starts when this button is pressed
and stops when the button is pressed again.
2. OPERATION MODE SELECTION
BUTTON
Used to select the operation Mode.
3. ROOM TEMPERATURE SETTING
BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTION
Used to select fan speed in three steps-low,
High, Super High.
5. FAN OPERATION LAMP
6. COOLING OPERATION LAMP
7. SOFT DRY OPERATION LAMP
8. OUTDOOR UNIT OPERATION LAMP
9. AUTO OPERATION LAMP
10. OFF TIMER OPERATION LAMP
11. TURBO-Z OPERATION LAMP
Owner's Manual 11
ENGLISH
Features of the Remote Control- Door Closed
Operating Instructions
Handling the remote control
• Aim at the signal receptor on the floor standing type air conditioner when operating.
• The remote control signal can be received at a distance of up to about 7meters.
• Be sure that there are no obstructions between the remote control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat
source.
Wireless Remote Control Puts all functions at your fingertips
START/STOP BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
ROOM TEMPERATURE
SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED
SELECTOR
Used to select fan speed in 3 steps low,
high, super high.
TURBO-Z
Used to start or stop the speed
cooling. (Speed cooling operates
super high fan speed in cooling mode.)
AUTO AIRFLOW
DIRECTION CONTROL
BUTTON
The horizontal louvers swing up and down.
1
2
3
4
5
Operation Mode
4
3
5
1
2
Flip-up door
(closed)
Cooling Operation
Auto Operation
Soft Dry Operation
Features of the Remote Control- Door Opened
Operating Instructions
12 Floor Standing-Type Air Conditioner
ON/OFF TIMER BUTTONS
Used to set the time of starting and
stopping operation.
TIME SETTING BUTTONS
Used to adjust the time.
TIMER SET/CANCEL BUTTONS
Used to set the timer when the desired
time is obtained and to cancel the Timer
operation.
SIMPLE OFF TIMER SET
BUTTON
Each time the button is pressed, the mode
is changed in the following process.
Time set (1, 2, 3, 4, 5, 6, 7 hurs)
If you select "0" the off Timer function will
be cancelled.
ENERGY SAVING OPERATION
BUTTON (Not Available)
˚C ↔ ˚F SWITCHING BUTTON
Used to switch temperature reading from
Centigrade to Fahrenheit and viceversa.
RESET BUTTON
Used prior to resetting time or after
replacing batteries.
INDOOR FAN OPERATION
BUTTON
Used to circulate the room air without
cooling
or heating (turns indoor fan on/off).
OPERATION MODE
SELECTION BUTTON
Used to select the operation mode.
AUTO AIRFLOW DIRECTION
CONTROL BUTTON
The vertical louvers swing right and left.
1
2
3
4
5
6
7
8
9
10
ON OFF
SET
CANCEL
2
3
9
10
1
ON OFF
SET
CANCEL
4
5
6
8
7
Owner's Manual 13
ENGLISH
Insert Pull
Operating Instructions
Remote Control Preparation
1. How to mount onto a wall
2. To insert the remote control to the holder.
How to insert batteries
1. Remove the cover from the back of the
remote controller.
• Slide the cover according to the arrow
direction.
2. Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
• Slide the cover into back position.
• Do not use rechargeable batteries
such batteries as different from
standard dry cells in shape,
dimensions, and performance.
• Change the batteries with a new
one if the remote control does not
work properly after using for an
extended length of time.
Use the screws to secure the holder to the wall or attach the holder side of indoor unit.
"FLIP TYPE" Remote controller which deliver along with the Set, Can’t adjust with space
provided inside the Inlet Grill.
NOTICE
14 Floor Standing-Type Air Conditioner
Cooling Operation
Auto Operation Soft Dry Operation
Low Super HighHigh
Cooling Auto Soft Dry
Fan speed is on Low. Fan speed is on High Fan speed is on Super High
Operating Instructions
How to use the Operation Mode Button
How to use the Fan speed Button
• Each time the Operation Mode Selection Button is pressed, the Operation Mode is shifted in the arrow direction.
• Each time the Fan speed Button is pressed, the Fan speed is shifted in the arrow direction.
Open the door on the remote control.
Each time the button is pressed, the operation mode is shifted in
the direction of the arrow.
Owner's Manual 15
ENGLISH
2
3
4
1
To raise the temperature
To lower the temperature
ON OFF
SET
CANCEL
Low Super HighHigh
Fan speed is on Low. Fan speed is on High Fan speed is on Super High
Operating Instructions
Cooling Operation Mode
Press the Start/Stop Button.
Press the Operation Mode Selection Button.
Press the Operation Mode Button on the remote controller.
Select Cooling Operation.
Set the temperature lower than the room temperature.
The temperature can be set within a range of 60°F~86°F by 1°F.
Set the Fan Speed.
❑ Each time the Fan Speed Button is pressed,
the Fan Speed mode is shifted in the arrow
direction.
16 Floor Standing-Type Air Conditioner
2
3
1
To raise the temperature
To lower the temperature
ON OFF
SET
CANCEL
Operating Instructions
Soft Dry Operation
Press the Start/Stop Button.
Press the Operation Mode Selection Button.
Press the Operation Mode Button on the remote controller.
Select Soft Dry Operation.
Set the temperature lower than the room temperature.
The temperature can be set within a range of 60°F~86°F by 1°F.
Owner's Manual 17
ENGLISH
2
3
1
To raise the temperature.
To lower the temperature.
Cold HotWarmCool Proper
ON OFF
SET
CANCEL
Operating Instructions
Auto Operation Mode
Press the Start/Stop Button.
Press the Operation Mode Selection Button.
Press the Operation Mode Button on the remote controller.
Select Auto Dry Operation.
Set the temperature upper or lower than the standard temperature.
The temperature can be set within a range of by 1 level.
(This indication will be shifted to the initial Auto Mode Display state after 4 seconds.)
During Auto Operation
• It is impossible to switch the indoor fan speed because of being already set to the best conditioner
by fuzzy rule.
Operating Instructions
18 Floor Standing-Type Air Conditioner
Turbo-Z Operation
Press the Start/Stop Button.
Press the TURBO-Z button to operate the speed cooling mode and the unit will operate in
super high fan speed in cooling mode.
To cancel the TURBO-Z mode, press the TURBO-Z button again or the Auto Swing Direction
Control Button (Up & Down, Left & Right) or Operation Mode Button and the unit will operate in
High. Fan speed on cooling mode.
❏ During the TURBO-Z function at any moment, the A/C starts to blow the cool air at extremely high
speed setting the room temp. automatically to 65°F. It is especially used to cool the room. in the
shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode however, the TURBO-Z function is not available.
NOTICE
1
2
3
or or or
ON OFF
SET
CANCEL
ON OFF
SET
CANCEL
Operating Instructions
Owner's Manual 19
ENGLISH
Press °C ↔°F Switching Button.
Press the Start/Stop Button.
Press the Operation Mode button and Low temperature setting buttons simultaneously for 3
seconds.
The unit will respond with beep.
Press °C ↔ °F Switching Button.
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to
operate procedures automatically to the previous operating conditions.
1
2
After 3 second,
it will shift
3
ON OFF
SET
CANCEL
20 Floor Standing-Type Air Conditioner
3
1
1
2
2
ON OFF
SET
CANCEL
ON OFF
SET
CANCEL
Fan speed is on Low. Fan speed is on High Fan speed is on Super High
Operating Instructions
Fan Operation Mode
Airflow Direction Procedure
Press the Start/Stop Button.
(Operation will start when the button is pressed,
and stop when the button is pressed again.)
Press this button to make
the vertical louver auto
swing in right and left
directions.
Press this button to make
the horizontal louver auto
swing in up and down
directions.
Press the Start/Stop
Button.
Set the Fan Speed.
❑ Each time the Button is pressed, the Fan Speed mode is shifted.
Press Fan Operation Button.
Owner's Manual 21
ENGLISH
3
2
4
1
• If you press the button, the selected off timer is displayed as follows;
• If you select ‘ ’, the Off Timer function will be cancelled.
After
4 seconds
After
4 seconds
ON OFF
SET
CANCEL
Operating Instructions
OFF Timer Setting Procedure(OFF TIMER Setting, or CANCEL)
When you finish the Off Timer setting, the Timer indicator lights off.
Press the Start/Stop Button.
Press the Timer Button.
During off-timer operation if you press the Timer Button, the rest time will be displayed.
22 Floor Standing-Type Air Conditioner
2
3
1
After 3 second,
it will shift
After 3 seconds,
it will shift
After pressing
the buttons
it will shift
immediately
After 3 seconds,
it will shift
Operating Instructions
Child Lock Operation Procedure
Press the fan speed button and High temperature setting buttons simultaneously for 3 seconds.
The unit will respond with beep.
During Child Lock Operation
➊ Whenever you press any Button, it will immediately display
“ ”, which means Button is Locked.
❷ All the Button on the indoor unit will not work.
❸ But the Button on the remote controller will work.
For releasing child lock Operation
Press the fan speed button and High temperature setting buttons simultaneously for 3 seconds.
The unit will respond with beep, Child Lock Operation will removed.
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to
operate procedures automatically to the previous operating conditions.
Operating Instructions
Owner's Manual 23
ENGLISH
Additional features
Setting the Time
Time can be set only when you have pressed
the Reset button. If you have just replaced the
batteries, the Reset button should be pressed
to reset the time.
Press the Start/Stop button.
Press the Time Setting buttons until the
desired time is set.
Press the Timer SET button.
Note: Check the indicator
for A.M. and P.M.
Make sure the time is set correctly on the
remote control display.
Press the ON/OFF Timer
buttons to turn Timer on or off.
Press the Time Setting
buttons until the desired
time is set.
Press the selected on/off setting by
pressing the Timer SET button while
aiming the remote control at the signal
receptor.
To cancel the setting the timer.
Press the Timer Cancel button while
aiming remote control at the signal
receptor.
(The timer lamp on the air conditioner and
the display will go out.)
Delay Start/Pre-Set Stop
NOTE: Select one of the following four types of operation.
1
2
3
with the unit running
1
2
3
4
ON OFF
SET
SET
CANCEL
Delay OFF Timer Delay ON Timer Delay OFF and ON Timer Delay ON and OFF Timer
24 Floor Standing-Type Air Conditioner
Care and Maintenance
During the season
Care and Maintenance
CAUTION: Before performing any maintenance, turn off the main power to the system.
Remove the Air Filter.
Take hold of the tab and pull slightly
forward to remove the filter.
Clean.
• To remove the dust adhering to the
filters, either use a vacunm cleaner, or
wash them in water and dry in the
shade.
• Re-insert the filter to the original
position.
Cleaning of the air filters.
Recommended about once every two weeks
11 22
• Don’t wash with water.
• Wipe with a soft dry cloth.
Cleaning of the air conditioner
Never use any of the followings.
• Water hotter than 104°F.
Could cause deformation and/or discoloration.
• Volatile substances.
Could damage the surfaces of the air
conditioner.
There’s the
danger of
electrical
shock.
Owner's Manual 25
ENGLISH
Care and Maintenance
When the air conditioner is not going to be used for a long time.
Operation Tips
At the end of the season
At the start of the season
Operate the air conditioner at the
following settings for 2 to 3 hours.
• Type of operation : Cooling.
• Temperature setting : 86°F.
This will dry out the internal mechanisms.
Remove the batteries from the Remote
Control.
Turn off the circuit breaker.
Turn off the circuit breaker when the air
conditioner is not going to be used for a long time.
Dirt may collect and may cause a fire.
Clean the air filters, re-insert, then
operate the air conditioner.
Be sure that nothing obstructs the air
outlet and intake vents.
11
22
33
11
22
Do not overcool the room.
This is not good for your health and
wastes electricity.
Make sure that the doors and
windows are shut tight.
Avoid opening doors and windows
as much as possible to keep the
cool air in the room.
Keep blinds or curtains closed.
Do not let direct sunshine enter the
room when the air conditioner is in
operation.
Clean the air filter regularly.
Blockages in the air filter reduce the
airflow and lower cooling and
dehumidifying effects. Clean at least
once every two weeks.
Keep the room temperature
uniform.
Adjust the vertical and horizontal
airflow direction to ensure a uniform
temperature in the room.
Ventilate the room occasionally.
Since windows are kept closed, it is
a good idea to open them and
ventilate the room now and then.
CAUTION
CAUTION
26 Floor Standing-Type Air Conditioner
Before you call for service...
Troubleshooting Tips! Save time and money!
Before you call for service...
Check the following points before requesting repairs or service.... If the fault persists, please contact your
dealer or service center.
Case Explanation See page
Does not operate.
The room has a peculiar
odor.
It seems that condensation is
leaking from the air
conditioner.
Air conditioner does not
operate for about 3 minutes
when restarted.
Does not cool effectively.
The air conditioner operation
is noisy.
• Have you made a mistake in timer operation?
• Has the fuse blown or has the circuit breaker been
tripped?
• Is the power Switch at Off?
• Is the unit at the starting of Heating Operation?
If yes, Hot-start is activating.
• Is the unit in the Deicing?
If yes, wait for finishing the Deicing.
• Check that this is not a damp smell exuded by the
walls, carpet, furniture, or cloth items in the room.
• Condensation occurs when the airflow from the air
conditioner cools the warm room air.
• This is the Protection device of the air conditioner .
• Wait about three minutes and operation will begin.
• If the airflow begins before its temperature become
warm, it will cause an undesired cooling effect. In
order to prevent this, the airflow will not begin until
it is sufficiently warm.
• Is the air filter dirty? See air filter cleaning
instructions.
• The room may have been very hot when the room
air conditioner was first turned on. Allow time for it
to cool down.
• Has the temperature been set incorrectly?
• Are the indoor unit's air inlet or outlet vents
obstructed?
• For a noise that sounds like water flowing.
-This is the sound of freon flowing inside the air
conditioner unit.
• For a noise that sounds like the compressed air
releasing into atmosphere.
-This is the sound of the dehumidifying water being
processed inside the air conditioning unit.
-
-
-
24
-
-
-
NOTE
WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.
The indoor side is not water resistant and should not be exposed to excess water.
Celsius(°C) ↔Fahrenheit (°F) Convert Table
Owner's Manual 27
ENGLISH
°C °F
032
133
134
235
236
337
338
439
440
541
642
643
744
745
846
847
948
949
10 50
11 51
11 52
12 53
12 54
13 55
13 56
14 57
14 58
15 59
16 60
16 61
17 62
17 63
18 64
18 65
19 66
19 67
20 68
21 69
21 70
22 71
22 72
23 73
23 74
24 75
24 76
25 77
°C °F
26 78
26 79
27 80
27 81
28 82
28 83
29 84
29 85
30 86
31 87
31 88
32 89
32 90
33 91
33 92
34 93
34 94
35 95
36 96
36 97
37 98
37 99
38 100
38 101
39 102
39 103
40 104
41 105
41 106
42 107
42 108
43 109
43 110
44 111
44 112
45 113
46 114
46 115
47 116
47 117
48 118
48 119
49 120
49 121
50 122
Celsius(°C) ↔ Fahrenheit (°F) Convert Table
Memo
28 Floor Standing-Type Air Conditioner
Loading...