LG LFD21870 Series, LFD25870 Series, LFC25770 series User's Manual And Installation Instructions

P/No. MFL37933517
Please read this guide
thoroughly before
operating and keep it handy
for reference at all times.
Lea detenidamente estas
instrucciones antes utilizar
referencia para el futuro.
Veuillez lire ce guide attentivement
avant la mise en service de l’appareil
et gardez-le à portée de main
pour le consulter en cas de besoin.
LFD21870**, LFD25870**
FOR LG CUSTOMER SERVICE:
1-888-LGCANADA
Or visit us on the Web at: http://www.lg.ca
EL SERVICIO DE ATENCIÒN AL CLIENTE DE LG:
1-888-LGCANADA
Ou visitez notre site Web à l’adresse:
http://www.lg.ca
POUR SERVICE À LA CLIENTÈLE DE LG:
1-888-LGCANADA
O visítenos en la Web en: http://www.lg.ca
2
IMPORTANT SAFETY INFORMATION
Basic Safety Precautions ........................................5
CFC Disposal ..........................................................5
Grounding Requirements ........................................6
PARTS AND FEATURES
Parts And Features ...............................................11
REFRIGERATOR INSTALLATION
Unpacking Your Refrigerator ................................12
Installation ............................................................12
Base Cover ..........................................................12
Removing And Replacing
Your Refrigerator Handles And Doors .................13
Leveling And Door Alignment ...............................19
USING YOUR REFRIGERATOR
Ensuring Proper Air Circulation ............................20
Multi-Flow .............................................................20
Setting The Controls ............................................20
Adjusting Control Settings ....................................21
Food Storage Guide .............................................21
Storing Frozen Food ............................................22
Water Dispenser ...................................................22
Refrigerator Shelves ............................................23
Crisper Humidity Control ......................................24
Removing Crisper ................................................24
Glide‘N’Serve .......................................................24
Modular Door Bin .................................................25
Dairy Bin ...............................................................25
Utility Bin ..............................................................25
Tilting Door............................................................25
Ice Bin ..................................................................25
Tilt-Out Door Basket .............................................26
Durabase ..............................................................26
Durabase Divider .................................................26
Pull out Drawer .....................................................26
Filter ......................................................................27
CARE AND CLEANING
General Cleaning Tips .........................................28
Outside .................................................................28
Inside Walls ..........................................................28
Door Liner And Gaskets .......................................28
Plastic Parts .........................................................28
Condenser Coils ...................................................28
Light Bulb Replacement .......................................28
Power Interruptions ..............................................29
When You Go On Vacation ..................................29
When You Move ...................................................29
TROUBLESHOOTING
Understanding sounds you may hear ..................34
WARRANTY
Product Registration Information ............................3
THANK YOU!
Congratulations on your purchase
and welcome to the LG family.
Your new LG French Door
Refrigerator combines the most
advanced cooling technology
with simple operation and high
efficiency. Follow the operating
and care instructions in this
this manual and your refrigerator
will provide you with many years
of reliable service.
LG ELECTRONICS, INC.
LG REFRIGERATOR LIMITED WARRANTY - USA
3
Your LG Refrigerator will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") set forth below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, including Alaska, Hawaii, and U.S. Territories.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
Service trips to your home to deliver, pick up, and/or install the product, instruct, or replace house fuses or correct wiring, or correction of unauthorized repairs.
Damages or operating problems that result from misuse, abuse, operation outside environmental specifications or contrary to the requirements of precautions in the Operating Guide, accident, vermin, fire, flood, improper installation, acts of God, unauthorized modification or alteration, incorrect electrical current or voltage, or commercial use, or use for other than intended purpose.
Repairs when your LG refrigerator is used in other than normal, single-family household use.
Damages caused during and/or after delivery.
Display, discount, or refurbish units purchased with scratches, dents, or defects.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer. Proof of purchase is required and must be provided to LG in order to validate warranty.
CUSTOMER INTERACTIVE CENTER NUMBERS
TO CONTACT LG ELECTRONICS BY MAIL:
LG Customer Interactive Center P. O. Box 240007 201 James Record Road Huntsville, Alabama 35813 ATTN: CIC
WARRANTY PERIOD: REFRIGERATOR/FREEZER
LABOR: One Year from the Date of Purchase. PARTS: One Year from the Date of Purchase.
SEALED SYSTEM (Compressor, Condenser, and
Evaporator)
LABOR: One Year from the Date of Purchase. PARTS: Seven years from the Date of Purchase.
Replacement Units and Repair Parts are warranted for the remaining portion of the original unit’s warranty period.
HOW SERVICE IS HANDLED: In-Home Service (Except Model GR051):
Please retain dealer’s dated bill of sale or delivery ticket as evidence of the Date of Purchase for proof of warranty, and submit a copy of the bill of sale to the service person at the time warranty service is provided.
Please call 1-800-243-0000 and choose the appropriate option to locate your nearest LG Authorized Service Center. (Phones are answered
24 hours a day, 365 days per year.)
Or visit our website at: http://www.lgservice.com
To obtain Customer Assistance, Product Information, or Dealer or Authorized Service Center location:
Call
1-800-243-0000 (24 hours a day, 365 days per year)
and select the appropriate option from the menu.
Or visit our website at:
http://us.lgservice.com
4
visit our web site/http://www.lg.ca LG Electronics
LIMITED WARRANTY
CANADA
LG Electronics will repair or at its option replace, without charge, your product which proves to be defective in material or workmanship under normal use during the warranty period listed below from the date of original purchase.
This warranty is good only to the original purchaser of the product during the warranty period as long as it is in Canada.
W
ARRANTY PERIOD:
REFRIGERATOR/FREEZER
LABOR: One Year from the Date of Purchase. PARTS: One Year from the Date of Purchase.
SEALED SYSTEM (Compressor, Condenser, and Evaporator)
LABOR: One Year from the Date of Purchase. PARTS: Seven years from the Date of Purchase.
Replacement Units and Repair Parts are warranted for the remaining portion of the original unit’s warranty period.
No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES. INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG ELECTRONICS SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITYAPPLICABLE TO THIS PRODUCT.
Some States do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
Service trips to your home to deliver, pick up, and/or install the product, instruct, or replace house fuses or correct wiring, or correction of unauthorized repairs.
• Damages or operating problems that result from misuse, abuse, operation outside environmental specifications or contrary to the requirements of precautions in the Operating Guide, accident, vermin, fire, flood, improper installation, acts of God, unauthorized modification or alteration, incorrect electrical current or voltage, or commercial use, or use for other than intended purpose.
• Repairs when your LG refrigerator is used in other than normal, single-family household use.
• Damages caused during and/or after delivery.
• Display, discount, or refurbish units purchased with scratches, dents, or defects.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer. Proof of purchase is required and must be provided to LG in order to validate warranty.
CUSTOMER ASSISTANCE NUMBERS:
To obtain Warranty Coverage: Retain your Bill of Sale to prove date of purchase.
A Copy of your Sales Receipt must be submitted at the time warranty service is provided.
To obtain Product or Customer Call 1-888-542-2623 Service Assistance: Press the appropriate menu option, and have your product
type (Refrigerator), model number, serial number, and ZIP/Postal Code ready.
To obtain the nearest Call 1-888-542-2623 Authorized Service Center: Press the appropriate option, and have your product type
(Refrigerator), model number, serial number, and ZIP/Postal Code ready.
IMPORTANT SAFETY INSTRUCTIONS
5
This guide contains many important safety messages. Always read and obey all safety messages.
BASIC SAFETY PRECAUTIONS
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING, CAUTION. These words mean:
You will be killed or seriously injured if you don’t follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
Indicates an imminently hazardous situation which, if not avoided,
may result in minor or moderate injury, or product damage only.
DANGER
WARNING
CAUTION
DANGER: RISK OF CHILD ENTRAPMENT
Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous…even if they will sit for just a few days. If you
are getting rid of your old refrigerator, please follow the instructions at right to help prevent accidents.
BEFORE YOU THROW AWAY YOUR OLD REFRIGERATOR OR FREEZER
• Take off the doors.
Leave the shelves in place so that
children may not easily climb inside.
Your old refrigerator may have a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone.
If you are throwing away your old refrigerator, make sure the CFC refrigerant is removed for proper disposal by a qualified servicer. If you intentionally release this CFC refrigerant, you can be subject to fines and imprisonment under provisions of environmental legislation.
CFC DISPOSAL
GROUNDING REQUIREMENTS
6
IMPORTANT: Please read carefully. TO CONNECT ELECTRICITY
RECOMMENDED GROUNDING METHOD
The refrigerator should always be plugged into its own individual properly grounded electrical outlet rated for 115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a separate circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.
Where a standard two-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded three-prong wall outlet.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
NOTE: Before performing any type of installation,
cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator Control or Freezer Control, depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator Control or Freezer Control, depending on the model) to the desired setting.
USE OF EXTENSION CORDS
Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord. However, if you still elect to use
an extension cord, it is absolutely necessary that it be a UL-listed (USA), 3-wire grounding type appliance extension cord having a grounding type plug and outlet, and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.
Use of an extension cord will increase the clearance needed for the back of the refrigerator.
WARNING
Electrical Shock Hazard
FOR PERSONAL SAFETY, this appliance must be
properly grounded. Have the wall outlet and the circuit checked by a qualified electrician to make sure the outlet is properly grounded.
3-prong grounding plug
3-prong grounding type wall receptacle
Ensure proper ground exists before use.
SAVE THESE INSTRUCTIONS
WARNING
• Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.
• When moving your refrigerator away from the wall, be careful not to roll over or damage the power cord.
• Keep fingers out of pinch point areas; clearances between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.
• This refrigerator must be properly installed in accordance with the Attention Installer Instructions that were taped to the front of the refrigerator.
• Don’t touch the lamp, in case of light on the long time, Because it can be very hot.
• DO NOT refreeze frozen foods which have thawed completely. The United States Department of Agriculture in Home and Garden Bulletin No. 69 says:
…You may safely refreeze frozen foods that have thawed if they still contain ice crystals or if they are still cold—below 40°F (4°C).
…Thawed ground meats, poultry or fish that have any off­odor or off-color should not be refrozen and should not be eaten. Thawed ice cream should be discarded. If the odor or color of any food is poor or questionable, get rid of it. The food may be dangerous to eat.
Even partial thawing and refreezing reduces the eating quality of foods, particularly fruits, vegetables and prepared foods. The eating quality of red meats is affected less than that of many other foods. Use refrozen foods as soon as possible to save as much of their quality as you can.
WARNING
7
1. When connecting the power
The dedicated outlet should be used.
• Using several devices at one outlet may cause fire.
• The electric leakage breaker may damage food and the dispenser may be leaked.
Do not allow the power cord bent or pressed by the heavy object to be damaged.
It may damage the power cord to cause fire or electric shock.
Unplug the power plug when cleaning, handling or replacing the interior lamp of the refrigerator.
• It may cause electric shock or injury.
• When replacing the interior lamp of the refrigerator, make sure that the rubber ring for preventing the electric spark within the socket is not taken off.
Remove water or dust from the power plug and insert it with the ends of the pins securely connected.
Dust, water or unstable connection may fire or electric shock.
When the power cord or the power plug is damaged or the holes of the outlet are loosed, do not use them.
It may cause electric shock or short circuit to make fire.
Do not allow the power plug to face upward or to be squeezed at the back of the refrigerator.
Water may be flown into or the plug may be damaged, which causes fire or electric shock.
Do not extend or modify the length of the power plug.
It causes electric shock or fire by the electric damage of the power cord or others.
Do not pull out the cord or touch the power plug with wet hands.
• It may cause electric shock or injury.
Make sure of grounding.
The incorrect grounding may cause breakdown and electric shock.
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following. Read all instructions before using this appliance.
Grounding Conductor
Copper
flat
More than
75cm
IMPORTANT SAFETY INSTRUCTIONS
8
2. When using the refrigerator
Do not place the heavy object or the dangerous object (container with liquid) on the refrigerator.
It may be dropped to cause injury, fire or electric shock when opening or closing the door.
Do not cling to the door or the shelves of the door or the home bar of the freezer or the cool chamber.
It may make the refrigerator fallen down or damage the hands. Especially, do not allow the children to do the above.
Do not place the lit candle within the refrigerator to deodorize.
It may cause explosion or fire.
Do not store the medicine or the academic materials at the refrigerator.
When the material with the strict temperature control is stored, it may be deteriorated or it may make an unexpected reaction to cause any risk.
Avoid the heating devices.
It may cause fire.
Do not install the refrigerator in the wet place or the place which water or rain splashes.
Deterioration of insulation of electric parts may cause electric leakage.
Do not use or store inflammable materials ether, benzene, alcohol, medicine, LP gas, spray or cosmetics near or in the refrigerator.
It may cause explosion or fire.
Do not insert the hands into the ice bucket or the ice dispenser.
Operating the ice maker may cause injury.
Do not use the combustible spray near the refrigerator.
It may cause fire.
Do not place flower vase, cup, cosmetics, medicine or any container with water on the refrigerator.
It may cause fire, electric shock or injury by dropping down.
Use the submerged refrigerator after checking it.
It may cause electric shock or fire.
When gas is leaked, do not touch the refrigerator or the outlet and ventilate the room immediately.
• The explosion by spark may cause fire or burn.
• Because this refrigerator uses natural gas (isobutene, R600a) as the environment-friendly refrigerant, even a small amount (80~90g) is combustible. When the gas is leaked by the severe damage during delivering, installing or using the refrigerator, any spark may cause fire or burn.
The Academic
Medicine
The Medicine
Benzene
Ether
Thinner
IMPORTANT SAFETY INSTRUCTIONS
9
2. When using the refrigerator
Do not spray water at the outside or the inside of the refrigerator or do not clean it with benzene or thinner.
Deterioration of insulation of electric parts may cause electric shock or fire.
Do not allow any person except the qualified engineer to disassemble, repair or alter the refrigerator.
It may cause injury, electric shock or fire.
When disposing the refrigerator, remove the packing materials from the door.
It may cause to lock out the child.
Do not insert the hands or the metal stick into the exit of cool air, the cover, the bottom of the refrigerator, the heatproof grill (exhaust hole) at the backside.
It may cause electric shock or injury.
When any strange smell or smoke is detected from the refrigerator, disconnect the power plug immediately and contact to the service center. Service center
It may cause fire.
CAUTION
Violating this direction may cause injury or damage house or furniture. Always be careful, please.
Do not touch food or containers at the freezer with wet hands.
It may cause frostbite.
Do not put ice in thin crystal cup or ceramic ware.
It may break cup or ceramic ware to cause injury.
Do not use the refrigerator for non-domestic purpose (storing medicine or testing material, using at the ship, etc.).
It may cause an unexpected risk such as fire, electric shock, deterioration of stored material or chemical reaction.
Install the refrigerator on the solid and level floor.
Installing it on the unstable place may cause death by falling down the refrigerator when opening or closing the door.
When you want to dispose the refrigerator, contact to the down-block office.
When you want to dispose the large living waste such as electric home appliance and furniture, you’d better contact the local down-block office.
Thinner
Down-block
office
Service
center
CAUTION
10
Wait for 5 minutes or longer when reconnecting the plug.
It may cause the operation of the freezer to fail.
Pull out the power plug not by grasping the cord but the plug of its end.
It may cause electric shock or short circuit to fire.
Do not insert the hands into the bottom of the refrigerator.
The iron plate of the bottom may cause injury.
Because opening or closing the door of the refrigerator may cause injury to the person around it, be careful, please.
Opening or closing the door may cause feet or hands to be caught in the chink in door or the child to be get hurt by the corner.
Do not put any living animal in the refrigerator.
Supply the automatic ice maker with drinkable water only (only for the model with the dispenser).
Otherwise, it may cause any risk.
Do not put bottle in the freezer.
It may freeze the contents to break the bottle to cause injury.
Do not install the refrigerator in the wet place or the place which water or rain splashes.
Deterioration of insulation of electric parts may cause electric leakage.
Carry the refrigerator with the handle bar at the bottom of the front and the top of the rear.
Otherwise, your hands may be slipped to cause injury.
After
5minutes
Drinkable
water
PARTS AND FEATURES
11
Digital Sensor Control
Filter (Inside) (p. 27)
Modular Door Bins (p. 25)
Shelves (p. 23)
Crisper (p. 24) (Keeps fruits and vegetable fresh and crisper)
Glide’N’Serve (p. 24)
Customcube Icemaker (p. 30)
N
A
B
O
C
D
E
F
G
H
M
C
I
J
L
K
Use this page to become more familiar with the parts and features. Page references are included for your convenience.
NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown below may not match your model.
A B
C D
E
F
G
Ice Bin (p. 25)
Pull out Drawer (p. 26)
Durabase (p. 26)
Divider (p. 26)
Tilt-Out Door Basket (p. 26)
Dairy Bin (p. 25)
Utility Bin (p. 25)
Water Tank Cover
H
I
J
K
L
M N
O
UNPACKING YOUR REFRIGERATOR
Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels, the model and serial number label, or the TechSheet that is attached to back wall of the refrigerator.
To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the Important Safety Instructions section.
Refrigerator shelves are installed in the shipping position. Please reinstall shelves according to your individual
storage needs.
INSTALLATION
1. To avoid vibration, the unit must be leveled. If required,
adjust the leveling legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling legs can be turned easily by tipping the cabinet slightly. Turn the leveling legs clockwise ( ) to raise the unit, counterclockwise ( ) to lower it.
2. Install this appliance in an area where the temperature
is between 55°F (13°C) and 110°F (43°C.) If the temperature around the appliance is too low or high, cooling ability may be adversely affected.
3. Allow the clearance of at least 2 inch from the ceiling
and 1 inch from the side walls for better cooling efficiency, ease of installation, proper air circulation and electrical connections.
: Avoid placing the unit near heat sources,
direct sunlight or moisture.
NEXT
1. Clean your refrigerator thoroughly and wipe off all dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours before
putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use.
• Be careful when you work with hinge, base grille, stopper etc. You may be injured.
• Do not put hands or foot or metal sticks into air vents, base grille, or bottom of refrigerator. You may be injured or receive an electrical shock.
BASE COVER
To remove the base cover
1.
Open the Freezer Drawer. (Drawer not shown for clarity.)
2. Once drawer is open there is sufficient clearance to
remove screws on top of cover.
To replace base cover:
• Place cover into position and insert and tighten screws.
REFRIGERATOR INSTALLATION
12
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
WARNING
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
CAUTION
WARNING
REFRIGERATOR INSTALLATION
13
HOW TO REMOVE DOOR HANDLES
To move refrigerator through a house door, it maybe necessary to remove refrigerator and freezer door handles. NOTE: Handle appearance may vary from
illustrations on this page.
1. Removing Refrigerator Handle
• Loosen the set screws with the 3/32” Allen wrench and remove the handle. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4” Allen wrench.
2. Removing Freezer Drawer Handle
• Loosen the set screws located on the lower side of the handle with the 3/32” Allen wrench and remove the handle. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4” Allen wrench.
Set Screw
Allen Wrench
Mounting
Fasteners
REFRIGERATOR INSTALLATION
14
HOW TO REPLACE DOOR HANDLES
NOTE: Handle appearance may vary from illustrations on this page.
1. Replacing Refrigerator Door Handle
• Place the handle on the door by adjusting handle footprints to fit mounting fastners and tighten the set screws with the 3/32” Allen wrench. NOTE: If the handle mounting fasteners need to be tightened or removed use a 1/4” Allen wrench.
2. Replacing Freezer Drawer Handle
• Place the handle on the door by adjusting handle footprints to fit mounting fastners and tighten the set screws on the bottom of the handle with a 3/32” Allen wrench. NOTE: If the handle mounting fasteners need to be tightened or removed use a 1/4” Allen wrench.
Mounting
Fasteners
3
4
7
8
6
2
5
1
4
7
8
6
2
5
1
REFRIGERATOR INSTALLATION
15
REMOVING AND REPLACING REFRIGERATOR DOORS
To remove the left refrigerator door:
Pull the water tube out of the fitting while pressing the release ring on the fitting. When you pull out the tube, first you have to push the collet by opposite direction of arrow in the upper picture and tube pull out by direction of arrow.
: Before you begin, remove food and bins
from the doors.
• Open the door. Remove the top hinge cover screw (1).
• Use a flat-head screwdriver to pry back the hooks (not shown) on the front underside of the cover (2). Lift up the cover.
• Remove the cover. Pull out the tube (3).
• Disconnect all the wire harnesses (4).
• Remove the grounding screw(5)
• Rotate hinge lever (6) counterclockwise and remove. Lift the top hinge (7) free of the hinge lever latch (8).
IMPORTANT: When lifting the hinge free of the latch, be careful that the door does not fall forward.
• Lift the door from the middle hinge pin and remove the door.
• Place the door, inside facing up, on a nonscratching surface.
To remove the right refrigerator door:
• Open door.Loosen top hinge cover screw (1). Lift up cover (2).
• Remove cover.
• Disconnect wire harness (4).Remove the grounding screw (5).
• Rotate hinge lever (6)clockwise and remove. Lift top hinge (7)free of hinge lever latch (8).
IMPORTANT: When lifting the hinge free of the latch, be careful that the door does not fall forward.
CAUTION
REFRIGERATOR INSTALLATION
16
Replacing Refrigerator Door:
Right Door
• Lower the door onto middle hinge pin (9).
• Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever counterclockwise to secure hinge.
• Install the grounding screw (5) and connect wire harnesses (4).
• Hook tab on door switch side of cover under edge of wire opening in cabinet top. Position cover (2) into place. lnsert and tighten cover screw (1).
Left Door
• Lower the door onto middle hinge pin (9).
• Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever clockwise to secure hinge.
• Install the grounding screw (5) and connect the three wire harnesses (4).
• Push the water supply tube into the hole on the top case and pull it out on the backplate.
• Insert the water supply tube (3) into the connector tube until you see only one scale mark. (Fully insert the tube over 5/8”(15mm)).
• Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and tighten cover screw (1).
9
9
Correct
Incorrect
1
2
REFRIGERATOR INSTALLATION
17
HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product or
property damage, you will need two people to perform the following instructions.
1. Removing Pullout Drawer
• Pull the drawer open to full extension. Remove the lower basket (1) by lifting basket from rail system. (If you tilt the door, it will be easier.)
• Press both hangers with your thumbs to lift it up.
• Separate the left and right rail cover.
• Remove the screws(2) of the rail on both sides.
• With both hands, hold both sides of the door and pull it up to separate it from the rails.
• With both hands, hold the center bar and push it in to let both rails fitted simultaneously.
: When you remove the drawer, do not
hold the handle. If it may come off and it could cause personal injury.
: When laying the drawer down, be careful
not to damage the floor or hurt your feet by the sharp edges on hinge side.
CAUTION
CAUTION
3
2
1
4
REFRIGERATOR INSTALLATION
18
HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product or
property damage, you will need two people to perform the following instructions.
2. Installing Pullout Drawer
• With both hands, hold the center bar and push it out to let both rails out to full extension simultaneously.
• Hook door supports (1) into rail tabs (2).
• Lower door into final position and tighten the screws (3).
• Make sure you have a right rail cover for each side.
• Align the top holes of the rail cover with the top holes of the door supports to assemble the rail covers.
• With the drawer pulled out to full extension, insert the lower basket (4) in the rail assembly.
: To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to play inside of drawer.
: DO NOT step or sit down on freezer
door.
Right
Rail Cover
Assembly Hole
Left
Rail Cover
WARNING
WARNING
REFRIGERATOR INSTALLATION
19
LEVELING AND DOOR ALIGNMENT
Leveling
After installing, secure the product with the LEG not to move left or right.
Your refrigerator has two front leveling legs—one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator’s tilt using the instructions below:
1. Plug the refrigerator’s power cord into a 3-prong
grounded outlet. Move the refrigerator into its final position.
2. Turn the leveling leg clockwise to raise that side of the
refrigerator or counterclockwise to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator.
NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling legs. This makes it easier to adjust the legs.
3. Open both doors again and check to make sure that
they close easily. If not, tilt the refrigerator slightly more to the rear by turning both leveling legs clockwise. It may take several more turns, and you should turn both leveling legs the same amount.
4. Re-adjust if necessary.
5. Replace the base cover. NOTE: Your new refrigerator is uniquely designed with
two fresh food doors. Either door can be opened or closed independently of one another. You may have to exert slight pressure on doors to get them to close completely.
Door Alignment
If the space between your doors is uneven, follow the instructions below to align the doors:
1. With one hand, lift up the door you want to raise at
middle hinge.
2. With other hand, use pliers to insert snap ring as
shown.
3. Insert additional snap rings until the doors are aligned.
(Three snap rings are provided with unit.)
USING YOUR REFRIGERATOR
20
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, air enters at top of the freezer and circulates down. From the bottom of the freezer, air is forced up to the top of the refrigerator. Air enters refrigerator through the top vent, then circulates and exists at the bottom, where it returns to the freezer.
MULTI-FLOW
• Multi-Flow means powerful and effective cooling operation. This is especially noticeable when new food is placed in the refrigerator compartment.
• If water or foreign substances enter the cool air vent while cleaning, efficiency will be lowered. In addition, if gasket is damaged, efficiency may be lowered because of escaping cool air.
Do not block any of cool air vents with food packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly. (See the Food Storage Guide section for details.)
SETTING THE CONTROLS
• Your refrigerator has a control pad on the dispenser that lets you regulate the temperature in the freezer and refrigerator compartments.
• Initially set the REFRIGERATOR CONTROL at 37°F (3°C) and the FREEZER CONTROL at 0°F (–18°C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired.
• Refrigerator Temp Control: 33°F to 46°F (0°C to 8°C) The lower the number setting, the colder the refrigerator compartment will become.
• Freezer Temp Control: -6°F to 8°F (-21°C to -13°C) When the setting is at a lower number, the freezer compartment becomes colder. The refrigerator compartment becomes warmer because less cold air flows into the refrigerator.
NOTE: If you want to change °F to °C or the reverse, press and hold FREEZER key and REFRIGERATOR key simultaneously for 5 seconds or more.
NOTE: If you want to off display, press and hold ICE PLUS key and FREEZER key over 5 seconds at the same time.
NOTE: Touch display once to activate, then touch again to change the settings or activate a function. If 10 seconds has passed since the display has been touched, it will be necessary to touch “once” again to reactivate.
This is to prevent accidental display setting changes.
• ICE PLUS : Press the ICE PLUS button and the LED will turn on. This function will remain activated for 24 hours and increase the cooling speed of the freezer and the amount of ice produced.
• Dispenser Lock : Press and hold the LOCK button for 3 seconds to lock the dispenser. When it is locked, the dispenser will not operate. To unlock, press and hold the LOCK button for 3 seconds.
• Filter Reset : It displays in months the number of months left to exchange the filter from the moment power is connected to the refrigerator. If you have changed the filter after 6 months of use, press and hold the FILTER button 3 seconds or more and the filter display will be initialized with a buzzing sound.
NOTE: The average life of the filter is 6 months.
: If a door is open, the dispenser does not
work.
WARNING
ADJUSTING CONTROL SETTINGS
Give the refrigerator time to cool down completely before making final adjustments. It is best to wait 24 hours before doing this. The mid-settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
The refrigerator control functions as the thermostat for the entire appliance (refrigerator and freezer sections). The higher the number setting, the longer the compressor will run to keep the temperature colder. The freezer control adjusts the cold air flow from the freezer to the refrigerator. Setting the freezer control to a lower temperature keeps more cold air in the Freezer compartment to make it colder.
If you need to adjust temperatures in the refrigerator or freezer, start by adjusting the refrigerator. Then wait 24 hours before checking the freezer temperature. If it is too warm or too cold, then adjust the freezer control.
Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between adjustments.
FOOD STORAGE GUIDE
Wrap or store food in the refrigerator in airtight and moisture-proof material unless otherwise noted. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check date code to ensure freshness.
USING YOUR REFRIGERATOR
21
CONDITION/ REASON:
RECOMMENDED ADJUSTMENT:
REFRIGERATOR section
too warm – Door opened often – Large amount of food added –
Room temperature very warm
FREEZER section too
warm/ice not made fast
enough – Door opened often – Large amount of food added – Very cold room temperature
(can’t cycle often enough) – Heavy ice usage – Air vents blocked by items
REFRIGERATOR section
too cold
– Controls not set correctly for
your conditions
FREEZER section too cold – Controls not set correctly for
your conditions
Set REFRIGERATOR control to next lower number, wait 24 hours, then re-check
Set FREEZER control to next lower number, wait 24 hours, then re­check
Move items out of airstream
Set REFRIGERATOR control to next higher number, wait 24 hours, then re-check
Set FREEZER control to next higher number, wait 24 hours, then re­check
Items How to
Butter or margarine
Cheese
Milk
Eggs
Fruit
Leafy vegetables
Vegetables with skins (carrots, peppers)
Fish
Leftovers
Keep opened butter in a covered
dish or closed compartment. When storing an extra supply, wrap in freezer packaging and freeze.
Store in the original wrapping until
you are ready to use it. Once opened, rewrap tightly in plastic wrap or aluminum foil.
Wipe milk cartons. For best
storage, place milk on interior shelf, not on door shelf.
Store in original carton or Utility Bin
on interior shelf, not on door shelf.
Wash, let dry, and store in
refrigerator in plastic bags or in the crisper. Do not wash or hull berries until you are ready to use them. Sort and keep berries in their original container in a crisper, or store in a sloosely closed paper bag on a refrigerator shelf.
Remove store wrapping and trim
or tear off bruised and discolored areas. Wash in cold water and drain. Place in plastic bag or plastic container and store in crisper.
Place in plastic bags or plastic
container and store in crisper.
Use fresh fish and shellfish the
same day purchased.
Cover leftovers with plastic wrap
or aluminum foil. Plastic containers with tight lids can also be used.
STORING FROZEN FOOD
NOTE: For further information about preparing food for
freezing or food storage times, check a freezer guide or a reliable cookbook.
Packaging
Successful freezing depends on correct packaging. When you close and seal the package, it must not allow air or moisture in or out. If it does, you could have food odor and taste transfer throughout the refrigerator and also dry out frozen food.
Packaging recommendations:
• Rigid plastic containers with tight-fitting lids
• Straight-sided canning/freezing jars
• Heavy-duty aluminum foil
• Plastic-coated paper
• Non-permeable plastic wraps
• Specified freezer-grade self-sealing plastic bags Follow package or container instructions for proper
freezing methods.
Do not use
• Bread wrappers
• Non-polyethylene plastic containers
• Containers without tight lids
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable wrap
: Do not keep beverage cans or plastic
food containers in the freezer compartment. They may be break if they freezer.
Freezing
Your freezer will not quick-freeze any large quantity of food. Do not put more unfrozen food into the freezer than will freeze within 24 hours (no more than 2 to 3 lbs of food per cubic foot of freezer space). Leave enough space in the freezer for air to circulate around packages. Be careful to leave enough room at the front so the door can close tightly.
Storage times will vary according to the quality and type of food, the type of packaging or wrap used (airtight and moisture-proof) and the storage temperature. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals.
NOTE: Allow hot foods to cool at room temperature for 30 minutes, then package and freeze. Cooling hot foods before freezing saves energy.
REFRIGERATOR SECTION
WATER DISPENSER
Push the dispenser pad with a glass until you hear a click to get cold water.
Tray can be easily removed by pressing and pulling it.
Tilt up the front of tray slightly and snap the ribs into the holes to replace the tray.
USING YOUR REFRIGERATOR
22
CAUTION
Dispenser Switch
Push
Ribs
Holes
USING YOUR REFRIGERATOR
23
REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model may have glass or wire shelves.
Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier; it will also reduce the amount of time the refrigerator door is open, saving energy.
IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, glass shelves are made with tempered glass, which will shatter into small pebble­sized pieces.
NOTE: Glass shelves are heavy. Use special care when removing them to avoid dropping them.
Adjusting Shelves
Remove shelves from the shipping position and replace shelves in the position you want.
• To remove a shelf—Tilt up the front of the shelf in the
direction of (1) and lift it in the direction of (2). Pull the shelf out.
• To reinstall a shelf—Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks drop into the slots.
: Make sure that shelves are level from
one side to the other. Failure to do so may result in the shelf falling or spilling food.
Sliding Out Shelves
You can slide glass shelves in and out of your refrigerator as follows.
• To slide the shelf out, carefully pull front of shelf
toward you.
• To slide shelf in, push shelf in until it stops.
Folding Shelf
You can store taller items such as a gallon container or bottles by simply push in front half of shelf underneath back half of shelf. Pull toward you to returm to a full shelf.
CAUTION
CRISPER HUMIDITY CONTROL
You can control the amount of humidity in the moisture­sealed crispers. Store vegetables or fruits requiring more or less humidity in separate crispers. Adjust the control to any setting between HIGH and LOW.
LOW lets moist air out of the crisper for best storage of
fruits.
HIGH keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
: The glass shelf over the crisper is not
firmly secured. Be careful when tilting.
REMOVING CRISPER
1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front and insert the drawer
into the frame and push it back into place.
To remove the glass
1. Lift up the glass under the crisper cover.
2. Pull the glass up and out.
GLIDE‘N’SERVE
The GlideNServe provides storage space with a variable temperature control that keeps the compartment colder than refrigerator.
This drawer can be used for large party trays, deli items, or beverages.
Controls
The control regulates the air temperature in the drawer. Set control level to COLD (print on surface) to provide normal refrigerator temperature. Use the COLDER (print on surface) setting for meats or other deli items.
NOTE: Cold air directed to the Glide‘N’Serve can decrease refrigerator temperature. Refrigerator control may need to be adjusted.
To replace Glide‘N’Serve
1. To remove, pull the drawer out to full extension.
2. Lift the front of the drawer up, then pull it straight out.
3. To install, slightly tilt up the front and insert the drawer
into the frame and push it back into place.
USING YOUR REFRIGERATOR
24
CAUTION
1
Loading...
+ 54 hidden pages