LG LFC21770ST User Manual [fr]

P/No. MFL37933513

Please read this guide

thoroughly before

operating and keep it handy

for reference at all times.

Veuillez lire ce guide attentivement

avant la mise en service de l’appareil

et gardez-le à portée de main

pour le consulter en cas de besoin.

Lea detenidamente estas

instrucciones antes utilizar

el frigorífico y guárdelas como

referencia para el futuro.

LFC25770**, LFC21770**

To contact LG Electronics, 24 hours a day, 7 days a week:

1-800-243-0000

Or visit us on the Web at: us.lge.com

Pour contacter LG Electronics, 24 heures par jour, 7 jours par semaine:

1-800-243-0000

Ou visitez notre site Web à l’adresse: us.lge.com

Para comunicarse con LG Electronics, 24 horas al día, 7 días a la semana:

1-800-243-0000

O visítenos en la Web en: us.lge.com

IMPORTANT SAFETY INFORMATION

Basic Safety Precautions ........................................3

CFC Disposal ..........................................................4

How to Connect Electricity ......................................5

PARTS AND FEATURES

Key Parts and Components ....................................6

INSTALLATION

Choose the Proper Location ...................................7

Clearances ..............................................................7

Flooring ...................................................................8

Handle Removal......................................................8

Door and Drawer Removal......................................9

Connecting the Water Supply ...............................15

Connecting the Water Lines..................................15

Leveling the Refrigerator Doors ............................17

Starting..................................................................18

HOW TO USE

Control Panel Features .........................................19

Automatic Icemaker .............................................20

Storing Foods .......................................................21

Location of Foods .................................................22

Shelf Height Adjustment .......................................23

CARE AND CLEANING

Removing and Replacing Components ................24

Cleaning the Refrigerator .....................................28

General Information .............................................28

TROUBLESHOOTING

Before Calling for Service …………………………29

SPECIFICATIONS

Key Dimensions and Specifications .....................33

WARRANTY

Product Registration Information ..........................34

THANK YOU!

Congratulations on your purchase

and welcome to the LG family.

Your new LG French Door

Refrigerator combines

advanced cooling technology

with simple operation and high

efficiency. Follow the operating

and care instructions in this

this manual and your refrigerator

will provide you with many years

of reliable service.

BASIC SAFETY PRECAUTIONS

This guide contains many important safety messages. Always read and obey all safety messages.

w This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill

or hurt you or others or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING, or CAUTION. These words mean:

wDANGER

You might be killed or seriously injured if you don’t follow instructions.

wWARNING

You can be killed or seriously injured if you don’t follow instructions.

wCAUTION

Indicates an imminently hazardous situation which, if not avoided, may result in minor or moderate injury, or product damage.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

wWARNING

To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following.

Read all instructions before using this appliance.

• NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull it straight out from the outlet.

• Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

• When moving your refrigerator away from the wall, be careful not to roll over or damage the power cord.

• DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

• DO NOT allow children to climb, stand, or hang on the refrigerator doors or shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

• Keep fingers out of pinch point areas; clearances between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

• Unplug your refrigerator before cleaning or making any repairs. NOTE: Service should be performed by a qualified technician.

• Before replacing a burned-out light bulb, unplug the refrigerator or turn off power at the circuit breaker or fuse box in order to avoid contact with a live wire filament. (A burned-out light bulb may break when being replaced.) NOTE: Some models have LED interior lighting and service should be performed by a qualified technician. NOTE: Setting either or both controls to the OFF position does not remove power to the light circuit.

• When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat Refrigerator Control, or Freezer Control, or Freezer Control, depending on the model) to the desired setting.

• This refrigerator must be properly installed in accordance with the Installer Instructions that were taped to the front of the refrigerator.

• After your refrigerator is in operation, do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may adhere to the extremely cold surfaces.

• In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

• Do not modify or extend the power cord length. It will cause electric shock or fire.

BASIC SAFETY PRECAUTIONS (CONT.)

• DO NOT refreeze frozen foods which have thawed completely. The United States Department of Agriculture in Home and Garden Bulletin No. 69 says:

…You may safely refreeze frozen foods that have thawed if they still contain ice crystals or if they are still cold—below 40°F (4°C).

…Thawed ground meats, poultry, or fish that have any off-odor or off-color should not be refrozen and should not be eaten. Thawed ice cream should be discarded. If the odor or color of any food is poor or questionable, dispose of it. The food may be dangerous to eat.

Even partial thawing and refreezing reduces the quality of foods, particularly fruits, vegetables, and prepared foods. The eating quality of red meats is affected less than that of many other foods. Use refrozen foods as soon as possible to save as much of their quality as you can.

CFC DISPOSAL

Your old refrigerator may have a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone.

If you are throwing away your old refrigerator, make sure the CFC refrigerant is removed for proper disposal by a qualified servicer. If you intentionally release this CFC refrigerant, you can be subject to fines and imprisonment under provisions of environmental legislation.

wDANGER

Risk of Child Entrapment

Discarded or abandoned refrigerators are dangerous, even if they will sit for just a few days. If you are disposing of your old refrigerator, please follow the instructions below to help prevent accidents.

Before you throw away your old refrigerator or freezer:

• Take off the doors.

• Leave the shelves in place so that children may not easily climb inside.

HOW TO CONNECT ELECTRICITY

IMPORTANT: Please read carefully.

wWARNING

Electrical Shock Hazard

For personal safety, this appliance must be properly grounded. Have the wall outlet and the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

RECOMMENDED GROUNDING METHOD

The refrigerator should always be plugged into its own individual properly grounded electrical outlet rated for 120 volts, 60 Hz, AC only, and fused at 20 amperes. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a separate circuit serving only this appliance be provided.

Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord. Where a standard two-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded three-prong wall outlet.

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not use an adapter plug. NOTE: Some models have LED interior lighting and

service should be performed by a qualified technician.

When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator Control, or Freezer Control, depending on the model) to the desired setting.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you still elect to use an extension cord, it is absolutely necessary that it be a UL-listed (USA), 3-wire grounding-type appliance extension cord having a grounding-type plug and outlet and that the electrical rating of the cord be 20 amperes (minimum) and 120 volts.

Use of an extension cord will increase the clearance needed for the back of the refrigerator.

SAVE THESE INSTRUCTIONS

In addition to the special features and components outlined in the Special Features section, there are several other important components that are referenced in this manual.

ADJUSTABLE REFRIGERATOR SHELVING

The refrigerator compartment shelves are adjustable to allow flexibility for storage needs.

MODULAR DOOR BINS

Three interchangeable bins can be arranged to suit your storage needs.

FIXED DOOR BIN

CRISPERS

LG’s crispers preserve humidity and help vegetables stay crisp.

REMOVABLE ICE STORAGE BIN

The ice storage bin can be removed to fill ice buckets, coolers, or pitchers.

DIGITAL SENSOR CONTROL

KEY PARTS AND COMPONENTS

3 6

CHOOSE THE PROPER LOCATION

wWARNING

Excessive Weight Hazard

Two or more people are required when moving and unpacking the appliance.

• Store and install the refrigerator where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.

• Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appliance is too low or too high, cooling ability may be adversely affected.

• If this refrigerator is installed where the temperature is above 110°F (43°C), the freezing capacity is compromised and the cost of electricity used increases.

• To reduce the risk of electric shock, do not install the refrigerator in a wet or damp area.

• Select a place where a water supply can be easily connected for the automatic icemaker and dispenser.

• Unstable installation may cause vibration and noise. If the floor is not even, make the refrigerator level by rotating the height adjusting screws.

• Properly ground the refrigerator to conform with all governing codes and ordinances.

wCAUTION

Avoid placing the unit near heat sources, direct sunlight, or moisture.

CLEARANCES

• Too small a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 in. (61 cm) in front of the refrigerator to open the doors.

NOTE: For complete dimensions and specifications,

see page 33.

1" (2.54 cm)

• To minimize noise and vibration, the refrigerator MUST be installed on a solidly constructed floor.

• To avoid vibration, the unit must be level. If required, adjust the leveling legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. The leveling legs can be turned easily by pushing against the top of the refrigerator to take the weight off the feet. Turn the leveling legs clockwise to raise the unit or counterclockwise to lower it.

• Carpeting and soft tile surfaces are not recommended.

• Never install the refrigerator on a platform or weakly supported structure.

NOTE: When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or walk the refrigerator when trying to move it; floor damage could occur.

HANDLE REMOVAL

To move the refrigerator through a house door, it may be necessary to remove the refrigerator door handles.

NOTE: Handle appearance may vary from illustrations on this page.

wCAUTION

• Use special care when removing handles to prevent scratching the doors.

• The handle could be damaged if you hit it with a hammer while removing or attaching.

• When you assemble or disassemble a handle, you must push or pull with reasonable force.

NOTE: It is recommend that the doors be removed when it is necessary to move the refrigerator through a

narrow opening.

Loosen the set screws with a 2.5 mm (3/32") Allen wrench and remove the handle.

NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4" Allen wrench.

FLOORING

Loosen the set screws located on the lower side of the handle with a 2.5 mm (3/32") Allen wrench and remove the handle.

NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4" Allen wrench.

Mounting

Fasteners

Set Screw

Allen Wrench

HANDLE REMOVAL (CONT.)

HANDLE REINSTALLATION

DOOR AND DRAWER REMOVAL

DOOR REMOVAL

wWARNING

Electric Shock Hazard

• Disconnect electrical supply to the refrigerator before installing. Failure to do so could result in death or serious injury.

• Do not put hands or feet or metal sticks into the air vents, base grille, or bottom of the refrigerator. You may be injured or receive an electrical shock.

• Be careful when you work with the hinge, base grille, and stopper. You may be injured.

Before you begin, remove food and bins from the doors.

If your entrance door is too narrow for the refrigerator to pass through, remove the refrigerator door and move the refrigerator sideways through the doorway.

Place the handle on the door by aligning handle footprints to fit mounting fasteners and tighten the set screws with a 2.5 mm (3/32") Allen wrench.

NOTE: If the handle mounting fasteners need to be tightened or removed use a 1/4"Allen wrench

1 Place the handle on the door by aligning

handle footprints to fit mounting fasteners and tighten the set screws on the bottom of the handle with a 2.5 mm (3/32") Allen wrench.

NOTE: If the handle mounting fasteners need to be tightened or removed use a 1/4"Allen wrench.

Mounting Fasteners

DOOR REMOVAL (CONT.)

DOOR AND DRAWER REMOVAL (CONT.)

• Open the door. Remove the top hinge cover screw (1 ).

• Use a flat-head screwdriver to pry back the hooks (not shown) on the front underside of the cover (2). Lift up the cover.

• Remove the cover.

• Disconnect all the wire harnesses (3).

• Remove the grounding screw(4)

• Rotate hinge lever (5) counterclockwise and remove. Lift the top hinge (6) free of the hinge lever latch (7).

IMPORTANT: When lifting the hinge free of the latch, be careful that the door does not fall forward.

• Lift the door from the middle hinge pin and remove the door.

• Place the door, inside facing up, on a non- scratching surface.

(1)

(2)

(5)

(6)

(7)

(4)

(3)

1 To remove the right refrigerator door:

• Open the door. Remove the top hinge cover screw (1 ). Lift up the cover (2).

• Remove the cover.

• Disconnect the wire harness (3).

• Rotate the hinge lever (4) clockwise and remove. Lift the top hinge (5) free of the hinge lever latch (6).

IMPORTANT: When lifting the hinge free of the latch, be careful that the door does not fall forward.

• Lift the door from the middle hinge pin and remove the door.

• Place the door, inside facing up, on a non- scratching surface.

(1)

(2)

(4)

(5)

(6)

(3)

DOOR AND DRAWER REMOVAL (CONT.)

DOOR REINSTALLATION

Install the right-side door first.

• Lower the door onto the middle hinge pin as shown.

1 • Fit the top hinge (1) over the hinge lever

latch (2) and into place. Insert the hinge lever (3) under the lever latch. Rotate the lever counterclockwise to secure the hinge.

• Connect the wire harness (4).

• Hook the tab on the door-switch side of the cover (5) under the edge of the wire opening in the cabinet top. Position the cover into place. Insert and tighten the cover screw (6).

(3)

(2)

(1)

(6)

(5)

(4)

Install the left-side door.

• Lower the door onto middle hinge pin.

3 • Fit the top hinge (1) over the hinge lever

latch (2) and into place. Insert the hinge lever (3) under the lever latch. Rotate the lever clockwise to secure the hinge.

• Install the grounding screw (4) and connect all the wire harnesses (5).

(4)

(5)

(3)

(2)

(1)

DOOR AND DRAWER REMOVAL (CONT.)

wCAUTION

1. Insert the tube until you can see only one of the lines printed on the tube.

2. After inserting, pull the tube to ascertain that it is secure.

3. Assemble the clip.

Collet

Correct Incorrect

Insert Line

Clip

Tube

DOOR AND DRAWER REMOVAL (CONT.)

FREEZER DRAWER REMOVAL

wCAUTION

• To avoid possible injury or product or property damage, you will need two people to perform the following instructions.

• When you remove the drawer, do not hold the handle. It may come off and could cause injury.

• When laying the drawer down, be careful not to damage the floor or hurt your feet with the sharp edges on the hinge side.

CAUTION: When you remove the drawer, do not hold the handle. If it may come off and it could cause personal injury.

CAUTION: When laying the drawer down, be careful not to damage the floor or hurt your feet by the sharp edges on hinge side.

To remove the freezer drawer, pull the drawer open to full extension. Remove the lower DuraBase ® basket by lifting the basket from the rail system.

Separate the left and right rail cover2

With both hands, hold both sides of the door and pull it up to separate it from the rails.

4 With both hands, flex the center bar enough

to allow the gears on both ends to release from the track.

Remove the screws of the rail on both sides.

wWARNING: To prevent accidental child and

pet entrapment or suffocation risk. DO NOT allow them to play inside of drawer.

wWARNING: DO NOT step or sit down on freezer.

DOOR AND DRAWER REMOVAL (CONT.)

FREEZER DRAWER REINSTALLATION

wCAUTION

• To avoid possible injury or product or property damage, you will need two people to perform the following instructions.

wDANGER

Risk of Child Entrapment

• To prevent accidental child and pet entrapment or suffocation risk, DO NOT allow them to play inside of the freezer drawer.

• DO NOT step or sit on the freezer drawer.

To reinstall the freezer drawer, hold the center bar with both hands and pull it out until both rails are fully extended.

1 Hook door supports (1) into rail tabs (2).

Lower door into final position and tighten the screws (3). Make sure you have a right rail cover for each side.

With the drawer pulled out to full extension, insert the lower basket in the rail assembly.

Align the top holes of the rail cover with the top holes of the door supports to assemble the rail covers.

Right

Rail Cover

Assembly Hole

Left

Rail Cover

CONNECTING THE WATER SUPPLY

wWARNING

Connect to safe drinking water supply only.

• The water pressure must be between 21 and 121 p.s.i. (1.5~8.5 kgf/cm2 ) on models without a water filter and between 43 and 121 p.s.i. (3~8.5 kgf/cm2) on models with a water filter.

• If water pressure does not reach 21 psi (1.5kgf/cm2) or falls below, it is necessary to purchase a separate pressure pump for normal automatic icemaker and water dispensing operation.

• It is recommended that the total length of the water feed tube does not exceed 26 ft. (8 m).

• Install the water supply line where it will not be affected by heat.

IMPORTANT: Read all directions thoroughly before you begin.

• If operating the refrigerator before installing the water connection, turn the icemaker to the OFF position to prevent operation without water.

• All installations must be in accordance with local plumbing code requirements.

• Use copper tubing and check for leaks.

• Install tubing only in areas where temperatures will remain above freezing.

• It may take up to 24 hours for the icemaker to begin producing ice.

Tools Required

• Standard screwdriver

• 7/16-in. and 1/2-in. open-end wrenches or two adjustable wrenches

• 1/4-in. nut driver

• 1/4-in. drill bit

• Hand drill or electric drill (properly grounded)

NOTE: Refrigerator dealers offer a kit with a 1/4-in. saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle- type valve complies with local plumbing codes.

Do not use a piercing-type or 3/16-in. saddle valve which reduces water flow and clogs more easily.

NOTE: The Commonwealth of Massachusetts

Plumbing Code 248CMR shall be adhered to.

Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

Cold Water Supply

• The icemaker water valve contains a flow washer which is used as a water pressure regulator.

• The icemaker needs to be connected to a cold water line with water pressure between 21~121 psi (1.5~8.5 kgf/cm2) on models without a water filter and between 43 and 121 p.s.i. (3~8.5kgf/cm2) on models with a water filter.

CONNECTING THE WATER LINES

IMPORTANT: Before connecting the tubing to the water line, unplug the refrigerator or disconnect the power.

• Turn off the main water supply and open the nearest faucet to relieve pressure in the line. Opening an outside faucet may help drain water from the line in the house.

• Find a 1/2-in. vertical COLD water pipe near the refrigerator.

NOTE: A horizontal pipe will work, but the following precaution must be taken: drill on the top of the pipe, not the bottom. This will help keep water away from the drill and also keep normal sediment from collecting in the valve.

• To determine the length of copper tubing you will need, measure from the connection on the lower left rear of the refrigerator to the water pipe. Add 7 ft. (2.1 m) to allow for moving the refrigerator for cleaning. Use 1/4-in. O.D. (outside diameter) copper tubing. Be sure both ends of the copper tubing are cut square.

• Using a drill, drill a 1/4-in. hole in the cold water pipe you have selected.

• Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the 1/4-in. drilled hole in the water pipe and the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws carefully and evenly so the washer makes a watertight seal. Do not overtighten or you may crush the copper tubing, especially if soft (coiled) copper tubing is used. Now you are ready to connect the copper tubing.

• Slip the compression sleeve and the compression nut onto the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw the compression nut onto the outlet end with a wrench. A flare nut wrench works best, but an open-end wrench will suffice. Do not overtighten.

• Place the free end of the tubing into a container or sink, and turn on the main water supply. Flush out the tubing until the water is clear. Turn off the shutoff valve on the water pipe. Coil the copper tubing as shown below.

IMPORTANT: Before connecting the tubing to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

NOTE: If your refrigerator is equipped with an internal water filter, an external in-line water filter should not be used.

• Remove the plastic flexible cap from the water valve.

• Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown.

• Insert the end of the copper tubing into the connection as far as possible. While holding the tubing, tighten the fitting.

IMPORTANT: Tighten any connections that leak. Open the water at the shutoff valve.

• Plug in the refrigerator.

• Arrange the coil of copper tubing behind the refrigerator so it does not vibrate against the back of the refrigerator or against the wall.

• Check for leaks.

• Before connecting the water line to house, purge house line for 2 minute.

NOTE: It may take a few seconds for water to begin to flow as the internal tank fills and air clears from the lines.

• Push the refrigerator back to the wall.

• Set the icemaker switch to the ON position.

NOTE: The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C). It will then begin operation automatically.

NOTE: Throw away the first few batches of ice (about 20 pieces).

CONNECTING THE WATER LINES (CONT.)

Packing Nut

Shutoff Valve

Compression Sleeve

Compression Nut

Cold Water Pipe

Pipe Clamp

Coil of Polyethelyne or Copper Tubing

Ferrule (Sleeve)

Refrigerator Connection

Water valve

Tubing Clamp

Tubing

Compression Nut

LEVELING THE REFRIGERATOR DOORS

wWARNING

Electrical Shock Hazard

• Be careful when you work with the hinges, base grille, and stopper. You may be injured.

• Do not put hands, feet, or metal items into the air vents, base grille, or the bottom of the refrigerator. You may be injured or receive an electrical shock.

Leveling

After installing, secure the product with the LEG not to move left or right.

Your refrigerator has two front leveling legs— one on the right and one on the left. Adjust the legs to alter the tilt from front to back or side to side. If your refrigerator seems unsteady or you want the doors to close more easily, adjust the refrigerator’s tilt using the following instructions:

wCAUTION

• To avoid possible injury or product or property damage, you will need two people to perform the following instructions.

Plug the power cord into a 3-prong grounded outlet, and move the refrigerator into its final position. Remove the kick plate screws and then the kick plate.

• Open the Freezer Drawer.

• Once the drawer is open, there is sufficient clearance to remove the screws on top of the kick plate.

NOTE: To replace the kick plate, place it into position, and then insert and tighten the screws.

Level the refrigerator by using an 11/32 inch (8mm) wrench or a flat blade screw driver.

Turn the leveling legs (CCW) to raise or (CW) to lower the height of the front of the refrigerator.

NOTE: The front of the refrigerator should be slightly higher than the back.

NOTE: If someone pushes backward against the top of the refrigerator, weight is lifted off of the leveling legs, which makes adjustment easier.

Open both doors to make sure they close easily. If not, raise the leveling legs higher by turning both clockwise the same amount.

Once the refrigerator is level, replace the kick- plate.

NOTE: Your new refrigerator is uniquely designed with two fresh food doors. Either door can be independently opened or closed.

You will have to exert slight pressure on the doors to close them completely.

NOTE: In order not to move the refrigerator back and forth, fix it with the 'Adjust' to the floor to install and use.

Kick Plate

DOOR ALIGNMENT

STARTING

Before loading your refrigerator with fresh foods:

• Remove tape and any temporary labels from your refrigerator before using. To remove any remaining adhesive residue, rub the area briskly with your thumb, or rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue.

NOTE: Do not remove any warning-type labels, the model and serial number label, or the tech sheet that is taped to the back of the refrigerator.

• Thoroughly clean your refrigerator and wipe off all dust that may have accumulated during shipping.

• Install accessories such as the ice cube bin, drawers, and shelves, in their proper places. They are packed together to prevent possible damage during shipment.

• Adjust the desired temperature for the refrigerator and freezer (see Adjusting the Temperature and Functions).

• Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use.

LEVELING THE REFRIGERATOR DOORS (CONT.)

If the space between your doors is uneven, follow the instructions below to align the doors:

• With one hand, lift up the door you want to raise at middle hinge.

• With other hand, use pliers to insert snap ring as shown.

• Insert additional snap rings until the doors are aligned. (Three snap rings are provided with the refrigerator.)

CONTROL PANEL FEATURES

FREEZER BUTTON

Press the FREEZER button to adjust the temperature in the freezer compartment.

NOTE: When pressed simultaneously with the REFRIGERATOR button for more than five seconds, the temperature display will change from Fahrenheit to Celsius or vice versa.

REFRIGERATOR BUTTON

Press the REFRIGERATOR button to adjust the temperature in the refrigerator compartment.

NOTE: When pressed simultaneously with the FREEZER button for more than five seconds, the temperature display will change from Fahrenheit to Celsius or vice versa.

ICE PLUS BUTTON

Press this button to turn on the ICE PLUS. feature, which increases icemaking capabilities up to 20 percent.

1 2

1 23

AUTOMATIC ICEMAKER

Ice is made in the automatic icemaker and sent to the dispenser. The automatic icemaker can make 6 ice cubes at a time, 100–130 cubes per 24-hour period. This quantity may vary by circumstance, including freezer compartment temperature, room temperature, number of door openings, freezer load, and other operating conditions.

• It takes about 12 to 24 hours for a newly installed refrigerator to make ice.

• Icemaking stops when the ice storage bin is full.

• To turn off the automatic icemaker, set the icemaker switch to OFF (O). To turn on the automatic icemaker, set the switch to ON (I).

• The cube size will vary depending on the Water Amount Selection Setting, as well as the water pressure of the connected water line.

• You can regulate the cube size by pressing the Cube size Selection Button.

NOTE: It is normal that a noise is produced when ice drops into the ice storage bin.

• Even when the water pipe is not connected and the Ice Maker is turned on, the water valve operates. The noise is generated because the water pipe is not connected, which does not mean the icemaker is defective.

wWARNING

Personal Injury Hazard

• Avoid contact with the moving parts of the ejector mechanism or with the heating element that releases the cubes.

• DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

NOTE: Raising the automatic shutoff arm does not turn off the icemaker.

wCAUTION

• The first ice and water may include particles or odor from the water supply line or the water tank.

• Throw away the first few batches of ice (about 20 pieces) and purge the water line for 2 minutes after installation to eliminate air and odd tastes.

• This is also necessary if the refrigerator has not been used for a long time.

• Never store beverage cans or other foods in the ice bin for the purpose of rapid cooling. Doing so may damage the icemaker or the containers may burst.

• If discolored ice is dispensed, check the water filter and water supply. If the problem continues, contact an Authorized Service Center. Do not use the ice or water until the problem is corrected.

• Keep children away from the dispenser. Do not allow children to play in or around dispenser.

• The ice passage may also become blocked with frost if only crushed ice is used. Remove the frost that accumulates.

• Never use thin crystal glass or crockery to collect ice. Such glasses or containers may break, and glass fragments could be in the ice.

• Dispense ice into a glass before filling it with water or other beverages. Splashing may occur if ice is dispensed into a glass that already contains liquid.

• Never use a glass that is exceptionally narrow or deep. Ice may jam in the ice passage and refrigerator performance may be affected.

• Keep the glass at a proper distance from the ice outlet. A glass held too close to the outlet may prevent ice from dispensing.

• To avoid personal injury, keep hands out of the ice door and passage.

• Never remove the icemaker cover.

• If you find ice or water dispensed unexpectedly, turn off the water supply and contact an Authorized

Service Center. Call

1-800-243-0000 (24 hours

a day, 365 days a year) and select the option to locate an authorized servicer.

lcemaker

Cube Size Indicator Light

Cube Size Select Button

Power Switch

Automatic Shut off Arm

STORING FOODS

• Store fresh food in the refrigerator compartment.

• How food is frozen and thawed is an important factor in maintaining freshness and flavor.

• Do not store food that spoils easily, such as bananas and melons, at low temperatures.

• Allow hot food to cool prior to storing; placing hot food in the refrigerator could spoil other food and lead to higher energy consumption.

• When storing food, cover it with vinyl wrap or store in a container with a lid. This prevents moisture from evaporating and helps food to keep its flavor and nutrition.

• Do not block air vents with food or containers. Smooth circulation of chilled air keeps the refrigerator temperatures even.

• Do not open the doors frequently. Opening the doors allows warm air to enter the refrigerator and freezer compartments, which causes temperatures to rise.

• Never overload the door racks; overloading may push against the inner racks and prevent the doors from closing correctly.

Freezer compartment

• Do not store glass bottles in the freezer compartment; glass may break when the contents are frozen.

• Do not refreeze food that has been thawed. This causes loss of flavor and nutrition.

• Do not touch cold foods or containers, especially those made of metal, with wet hands or place glass products in the freezer compartment.

• Do not use the egg box as an ice bin in the freezer. The egg box will break easily if it freezes.

Refrigerator compartment

• Avoid placing moist food on the top refrigerator shelves; it could freeze from direct contact with chilled air.

• Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped and packed food should be wiped to prevent adjacent food from spoiling.

NOTE: If you keep the refrigerator in a hot and humid place, frequent opening of the door or storing a lot of vegetables in the refrigerator may cause condensation to form. Wipe the condensation with a clean cloth or a paper towel.

LOCATION OF FOODS

REFRIGERATOR COMPARTMENT SHELVES

Store larger food items, platters, and containers on the expansive refrigerator compartment shelves.

DAIRY CORNER

Store milk products such as butter and cheese.

MODULAR REFRIGERATOR DOOR BINS

Store small packed food or beverages such as condiments, salad dressings, baby foods, milk, or juice.

FIXED DOOR BIN

CRISPERS

Store vegetables or fruits with humidity control.

FREEZER PULL-OUT DRAWER

Store small packed frozen food, or store meat, fish, and chicken after wrapping them with thin foil. Store dry.

SHELF HEIGHT ADJUSTMENT

The shelves in your refrigerator are adjustable to meet your individual storage needs.

Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier; it will also reduce the amount of time the refrigerator door is open, saving energy.

IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, glass shelves are made with tempered glass, which will shatter into small, pebble-sized pieces.

NOTE: Glass shelves are heavy. Use special care when removing them to avoid dropping them.

Adjusting Shelves

Remove shelves from the shipping position and place shelves in the position you want.

wCAUTION

Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf’s falling or spilling food.

Remove Shelf Reinstall Shelf

Tilt up the front of the shelf. Lift up the back and pull out the shelf.

Folding Shelf

You can store taller items such as a gallon container or bottles by simply pushing the front half of shelf underneath back half of shelf. Pull toward you to returm to a full shelf.

Tilt up the front of the shelf and guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks drop into the slots.

REMOVING AND REPLACING COMPONENTS

NOTE: When reinstalling components, reverse the order of steps for removal. To prevent damage, never use excessive force when removing or reinstalling components.

wCAUTION

• Personal injury can occur if the door bins are not firmly assembled. NOTE: DO NOT adjust a loaded bin.

• DO NOT allow children to play with baskets. The sharp corners on the baskets could cause injury.

Dairy Bin Modular Door Bin

To remove the dairy bin, simply lift it and pull straight out. To replace the dairy bin, slide it into place and push down until it stops.

NOTE: The dairy bin will only fit in the top space on the right-hand door.

The door bins are removable for easy cleaning and adjusting. Simply lift the bin and pull it straight out to remove it. To replace the bin, slide it in above the desired support button and push down until it stops.

REMOVING AND REPLACING COMPONENTS (CONT.)

Crisper humidity control

You can control the amount of humidity in the moisture-sealed crispers. Store vegetables or fruits requiring more or less humidity in separate crispers. Adjust the control to any setting between HIGH and LOW.

• LOW lets moist air out of the crisper for best storage of fruits.

• HIGH keeps moist air in the crisper for best storage of fresh, leafy vegetables.

CAUTION : The glass shelf over the crisper is not firmly secured. Be careful when tilting.

To remove the glass

• Lift up the glass under the crisper cover.

• Pull the glass up and out.

Removing crisper

• To remove, pull the drawer out to full extension.

• Lift the front of the crisper up, then pull it straight out.

• To install, slightly tilt up the front and insert the drawer into the frame and push it back into place.

Glide‘N’Serve

The Glide‘N’Serve provides storage space with a variable temperature control that keeps the compartment colder than refrigerator.

This drawer can be used for large party trays, deli items, or beverages.

Controls

The control regulates the air temperature in the drawer. Set control level to COLD (print on surface) to provide normal refrigerator temperature. Use the COLDER (print on surface) setting for meats or other deli items.

NOTE: Cold air directed to the Glide‘N’Serve can decrease refrigerator temperature. Refrigerator control may need to be adjusted.

REMOVING AND REPLACING COMPONENTS (CONT.)

wCAUTION

• Pinch hazard! Keep hands and feet clear of the bottom of the door when opening and closing.

wWARNING

Child Entrapment Hazard

• When the divider of the freezer drawer is removed, children may crawl inside.

Ice Bin DuraBase ® Divider

To separate the ice bin, pull out the drawer to full extension. Gently lift and pull out the ice bin. To reinstall, simply set the ice bin in its correct position.

The DuraBase divider organizes the DuraBase area into sections. Pull the divider upward in a straight motion to remove it. To reinstall it, hook the top corners of the divider over the top edge of the DuraBase.

Drawer

To replace Glide‘N’Serve

• To remove, pull the drawer out to full extension.

• Lift the front of the drawer up, then pull it straight out.

• To install, slightly tilt up the front and insert the drawer into the frame and push it back into place.

REMOVING AND REPLACING COMPONENTS (CONT.)

Tilt-Out Door Basket (LFC 25770**only)

To remove the tilt-out door basket, press in on the end bracket, then pull up on the end of the basket to remove.

1 To replace the tilt-out door basket, insert the

bracket into one side and hook one end of the basket into the bracket. Next, hook the other basket end into the other bracket and push the bracket downward into place.

NOTE: Be sure the back of the basket is positioned behind the retention tab on each bracket.

Pull-Out Drawer

To remove the drawer, push the tabs located on the front inside surface of each rail. Next, gently lift the rear left and right sides of the drawer and pull it out.

1 To reinstall, pull out both rails to full

extension. Insert the end of rib in the bracket at left and right. Making sure that the guides at the front are lined up properly, gently push down on both sides.

Bracket

CLEANING THE REFRIGERATOR

wWARNING

Explosion Hazard

• Use nonflammable cleaner.

• Failure to do so can result in death,

explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately.

• Unplug the refrigerator.

• Remove all removable parts, such as shelves and crispers.

• Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners.

• Hand wash, rinse, and thoroughly dry all surfaces.

• Plug in the refrigerator.

NOTE: Window sprays, abrasive cleaners, or flammable fluids can scratch or damage plastic covers or panels.

Cleaning the Exterior

For models with a stainless steel exterior, use a commercially available stainless steel cleaner in accordance with the manufacturer’s instructions.

You may also use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth.

IMPORTANT: Do not use cleaning waxes, concentrated detergents, or cleaners containing petroleum on plastic refrigerator parts such as door liners or gaskets.

Care and Cleaning of the Interior

NOTE: Allow the freezer to warm so the cleaning cloth will not stick.

To help remove odors, you can wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tbsp. baking soda to 1 qt. of water (26 g soda to 1 L of water). Be sure the baking soda dissolves completely so it does not scratch the surfaces of the refrigerator.

IMPORTANT: Do not use a spray nozzle to clean the interior.

GENERAL INFORMATION

Storage

During average-length vacations, you will probably find it best to leave the refrigerator in operation. Place freezable items in the freezer for longer life.

When you plan to store the refrigerator, remove all food, disconnect the power cord, clean the interior thoroughly, and block the doors open to prevent mold and mildew. Be certain the stored refrigerator does not present a child entrapment danger.

Moving

Unload the refrigerator to move it. (This is probably not necessary when pulling it out to clean behind it.) Be sure to let the refrigerator warm up to room temperature, and dry the inside before closing the doors to pack it for moving. To avoid damaging the height-adjusting screws, turn them all the way into the base.

Power Failure

Most power failures that are corrected within an hour or two will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off.

Water may drip from the ice bin during a power outage. To prevent this, remove the ice bin, discard all of the ice, towel dry, and replace.

BEFORE CALLING FOR SERVICE

Before calling for service, review this list. It may save you both time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance.

Problem Possible Causes Solutions

Refrigerator compressor does not run.

Refrigerator runs too frequently or too long.

Refrigerator compressor cycles on and off.

Temperature in the freezer is too cold, but the refrigerator temperature is satisfactory.

Temperature in the refrigerator is too cold, but the freezer temperature is satisfactory.

• Refrigerator control is off.

• Refrigerator is in defrost cycle.

• Plug at the wall outlet is disconnected.

• Power outage. Check house lights.

• Refrigerator is larger than the previous one you owned.

• The room or the outdoor weather is hot.

• Refrigerator was recently disconnected for a while.

• Large amounts of warm or hot food may have been stored recently.

• Doors are opened too frequently or for too long.

• Refrigerator or freezer door may be slightly open.

• Refrigerator control is set too cold.

• Refrigerator or freezer gasket is dirty, worn, cracked, or poorly fitted.

• The thermostat is keeping the refrigerator at a constant temperature.

• Freezer control is set too cold.

• Refrigerator control is set too cold.

• Set the refrigerator control.

• This is normal for a fully automatic defrosting refrigerator. The defrost cycle occurs periodically.

• Make sure the plug is tightly pushed into the outlet.

• Call the local electric company.

• This is normal. Larger, more efficient units run longer.

• It is normal for the refrigerator to work longer under these conditions.

• It takes a few hours for the refrigerator to reach cooling temperatures.

• Warm food will cause the refrigerator to run longer until the desired temperature is reached.

• Warm air entering the refrigerator causes it to run more. Open the door less often.

• Make sure the refrigerator is level. Keep food and containers from blocking the door.

• Adjust the refrigerator control to a warmer setting until the refrigerator temperature is satisfactory.

• Clean or change the gasket. Leaks in the door seal will cause the refrigerator to run longer in order to maintain desired temperatures.

• This is normal. The refrigerator cycles on and off to keep the temperature constant.

• Adjust the freezer control to a warmer setting until the freezer temperature is satisfactory.

• Adjust the refrigerator control to a warmer setting.

BEFORE CALLING FOR SERVICE (CONT.)

Problem Possible Causes Solutions

Food stored in refrigerator drawers freezes.

Temperatures in the refrigerator or freezer are too warm.

Temperature in the refrigerator is too warm, but the freezer temperature is satisfactory.

Louder sound levels when compressor comes on.

Vibrating or rattling noise.

Moisture collects on the inside walls of the refrigerator.

Moisture forms on the outside of the refrigerator or between the doors.

• Refrigerator control is set too cold.

• Freezer or refrigerator control is set too warm.

• Doors are opened too frequently or for too long.

• Door is slightly open.

• Large amounts of warm or hot food may have been stored recently.

• Refrigerator has recently been disconnected for a period of time.

• Refrigerator control is set too warm.

• Refrigerator operates at higher pressures during the start of the ON cycle.

• Floor is uneven or weak. The refrigerator rocks on the floor when it is moved slightly.

• Items placed on the top of the refrigerator are vibrating.

• Dishes are vibrating on the shelves in the refrigerator.

• The refrigerator is touching the wall or cabinets.

• The weather is hot and humid which increases the rate of frost buildup and internal sweating.

• Door is slightly open.

• Door is opened too often or for too long.

• Weather is humid.

• Door is slightly open.

• Adjust the refrigerator to a warmer setting.

• Adjust the freezer or refrigerator control to a colder setting until the freezer or refrigerator temperature is satisfactory.

• Warm air enters the refrigerator/freezer whenever the door is opened. Open the door less often.

• Close the door completely.

• Wait until the refrigerator or freezer has had a chance to cool food to the set temperature.

• It takes a few hours for the refrigerator to reach the set temperatures.

• Adjust the refrigerator control to a colder setting.

• This is normal.

• Be sure floor is level and solid and can adequately support the refrigerator.

• Remove items.

• It is normal for dishes to vibrate slightly. Move dishes slightly. Make sure refrigerator is level and firmly set on floor.

• Move the refrigerator so that it does not touch the wall.

• This is normal.

• Close the door.

• Open the door less often.

• This is normal in humid weather. When humidity is lower, the moisture should disappear.

• Close the door completely.

+ 78 hidden pages