LG LF53073032D, LF53075032D, LF53074032D User Manual

MFL67182201

Low carbon emissions allows environmentally-friendly lighting

Product is mercury-free, presenting no harm to the environment or human body. Its annual CO2 emissions have been dramatically reduced, making it an environment-friendly product.

Comparison of CO2 emissions

(unit: kgCO2)

Safety PrecautionsLED FLAT LIGHT

▶

The meanings of the signs displayed on the product and user manual are as follows:

•

This sign means use caution for dangerous items and operations. For parts with this sign,

user must read the manual carefully and follow instructions in order to avoid risks.

•

This sign is for displaying risks involving electric shock under certain conditions.

LED FLAT LIGHT

53W/60W

User Manual

• Please read the

• This manual is intended to prevent product damage and protect the user’s safety. Place the manual at a place where it can be easily located by all potential users.

•

Safety Precautions prior to use for your safety.

Advantages

Replacing existing lighting devices with the LED FLAT LIGHT can reduce energy costs by 30% or more.

34% -

70%

※

LG’s test standards

Dimming control provides additional energy reduction costs

Dimming control utilizing an illumination intensity sensor reduces electricity usage, thereby providing approximately 70% energy reduction.

Reduction in electric energy usage

Light control application provides energy reduction

Electricity 80W

Electricity 53W

Electricity 24W

Existing lamp LED LED (Dimming control)

※

This function is provided as an optional part.

conditions of use.

Dimming control system

Existing lamp LG FLAT 53W

※

If used 12 hours each day for a year

※

Conversion constant 0.573 kgCO2/Kwh, 3.86kgCO2/tree)

of planting 17 trees

Natural light prevents glare

It provides the lowest and best glare level in the industry by producing pleasant, healthy, and natural light without the use of a louver.

Existing light LED FLAT LIGHT

Long life expectancy provides low maintenance cost

If used for 12 hours a day, the product can be used for 10 or more years without replacement. Thus, maintenance costs are low, making it an economically sound option.

WARNING

CAUTION

WARNING

●

Violation of warnings may lead to serious injury or death.

●

Violation of precautions may lead to light injury or product damage.

Product is heavy. Use a trolley when transporting the product.

• Dropping the product may cause product damage and malfunction.

Do not install product in places exposed to dampness.

• Risk of re.

Do not install in areas that have risks of ooding.

• Risk of electric shock.

Do not install on un-leveled ceilings.

• Risk of product falling, which may lead

to product damage and injury to the user.

Use with proper rated voltage.

• Risk of re and product damage.

Install a circuit breaker.

• Risk of re and electric shock.

Perform grounding work.

• Risk of electric shock.

Electric work must be performed by a certied technician according to the installation manual.

•

Inadequate power capacity and faulty electric work may lead to re or electric shock.

WARNING WARNING

Turn power o before installation.

• Risk of electric shock.

Do not store in a humid area.

• Risk of product malfunctioning.

Do not install near potential sources of re or inammable objects, such as paper or cloth.

• Risk of product malfunctioning and

accidents.

Must x the product properly on the ceiling.

• Risk of product dropping and causing

injury to the user.

Do not randomly connect the power polarities.

• Risk of product damage and accidents.

Must use woodscrews provided by LG Electronics during installation.

• Risk of product falling and injury to

user.

Do not use the product if impurities are present in the product or if the product is submerged.

• Risk of accidents such as electric shock

and product damage.

Must have at least two or more people working during installation.

• Risk of product dropping and causing

injury to the user.

CAUTION

Do not disassemble or arbitrarily remodel the product. Do not use for underwater lighting purposes. (Underwater landscape, searchlight, shing, events, etc.)

• Risk of re and electric shocks.

If the lamp turns o by itself, do not disassemble the product. Contact your local LGE sales representative for repair.

• Risk of electric shock and product

malfunctioning.

Do not stare directly at the lamp when turned on.

• Strong light may cause visual

impairment.

Do not use for purposes other than lighting.

(Heating food, drying clothes, etc.)

• Risk of re.

Do not use if the product has been dropped or exposed to shock.

• Risk of product malfunctioning.

Do not install where it may be exposed to direct sunlight, humidity, or dust.

Installation

1. T-BAR

Do not expose the product to water when cleaning it.

• Risk of re and electric shock.

Top Cover

Never disassemble the product.

• Risk of accidents such as electric shock

and product damage.

Bottom Cover

Converter

< 600 x 600 Type > < 300 x 1200 Type >

2. Product Size

T: 596/620

M: 620

T: 596/620

T: 94/96 M: 96

M: 620

Do not clean the product with inammable substances such as

Benzene

Alcohol

alcohol, benzene, and acetone that may alter the surface.

T: 1256

M: 1270

T: 296 M: 310

*Unit: mm T : T -BAR M : M-BAR

• Make sure to turn oﬀ the main power switch of the installation space before connection.

• Connect so that the colors of the 3 power cables match.

(LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)

• When this luminaire is connected to branch circuit, installation engineer must use the connector

that is ame retardance of UL-94 V0 or higher.

Interior wiring

LIVE

of the bui lding

P.E.

NEUTRAL

Wire connectors

Product’s power cable s

Drill and prepare the ceiling

so the hole is smaller than the product.

Place the horizontal product

into the T-bar.

Connect the 3 product cables

to the interior wiring of the building. For wire connectors, use standardized products.

Ensure the inserted product

is horizontal.

Rotate the connected

product by 20 degrees. Then insert it into the T-bar insertion space.

• Make sure that all 4 sides of

the product match the T-bar.

Once installation is complete,

turn on the power switch to check it is operating properly.

• After the installation is

complete, remove the protective sheet.

2. M-BAR

• Make sure toturn the mainpower switch ofthe installation spacebefore connection.

• .hctamselbacrewop3ehtfosrolocehttahtosConnect

(LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)

• When this luminaire is connected to branch circuit, installation engineer must use the connector that is ame retardance of UL-94 V0 or higher.

• Use woodscrewsprovided by LG Electronics.

Interior wiring

LIVE

of the buil ding

P.E.

NEUTRAL

Wire connectors

Product’s power cable s

Drill and prepare the ceiling

so that the hole is smaller than the product.

Fix the product by using

woodscrews.

• ehttahteesotCheck

Connect the 3 product cables

to the interior wiring of the building. For wire connectors, use standardized products.

Perform a lighting test to

see if the product is working properly.

• sinoitallatsniehtAfter complete, remove the protective sheet.

Check the installation

location.

Check the following before requesting repair service

Symptom Check

It won’t turn on.

A certain area is dark.

Check to see if the power is connected or

Check to see if the dimming wires has short-circuited.

request.)

Make aservice request.

Category Unit

Watts 53.0 60.0 W

Light Color (CCT) 3000 4000 5000 5700 4000 5000 5700 K

Light Output (Lumens)

Color Accuracy (CRI)

Beam Angle 82 114 ˚(degrees)

600 x 600

Size

Method of Power Input

Some dimmers maynot becompatible.

※

Dimming performance may vary depending on the dimmer installed.

※

For more information, contact your local LGE sales representative.

Type

300 x 1200

Type

Product Weight 5 Kg

Input Voltage AC 110 - 240 ~ V

Input Frequency 50 / 60 Hz

Dimming

Power Factor (PF)

3600 3800 4000 3900 4600 4900 4800 Im

68 72 76 74 77 82 80 Im/W

53W 60W

T-Bar : 596(W ) x 596(D) x 94(H) 620(W) x 620(D) x 96(H)

M-Bar : 620(W) x 620(D) x 96(H)

T-Bar : 296(W ) x 1256(D) x 94(H)

M-Bar : 310(W) x 1270(D) x 94(H)

Single-Phase Three-Wire System

Dimmable with 0-10V DC control

(Source Current : 1.1mA, Max.)

≥ 0.9

Model Information

Category 53W 60W

3000K

4000K

600x600

Type

5000K

5700K

3000K

4000K

300x1200

Type

5000K

5700K

※ Asterisk(*) will vary by model.

T-Bar

M-Bar

T-Bar

M-Bar

T-Bar

M-Bar

T-Bar

M-Bar

T-Bar LF53175732*.C00***0 -

M-Bar

T-Bar LF53074042*.C00***0 LF60074042*.D00***0

M-Bar LF53174042*.C00***0 LF60174042*.D00***0

T-Bar LF53075042*.C00***0 LF60075042*.D00***0

M-Bar LF53175042*.C00***0 LF60175042*.D00***0

T-Bar LF53075742*.C00***0 LF60075742*.D00***0

M-Bar LF53175742*.C00***0 LF60175742*.D00***0

LF53073032*.C00***0 -

LF53173032*.C00***0 -

LF53074032*.C00***0 LF60074032*.D00***0

LF53174032*.C00***0 LF60174032*.D00***0

LF53075032*.C00***0 LF60075032*.D00***0

LF53175032*.C00***0 LF60175032*.D00***0

LF53075732*.C00***0 LF60075732*.D00***0

LF53175732*.C00***0 LF60175732*.D00***0

LF53173042*.C00***0 -

※

To dim the lamps, a compatible dimmer should be used. The use of incompatible dimmers will result in damage to the products. Before installing dimmers, verify the compatible dimmer list with your local LGE sales representative.

Connection

Terminal

10mm

AWG.20-24

Limited WarrantyDimming Terminal Connection

The limited warranty set forth below is given by LG Electronics, Inc. (“LGE”) with respect to the lighting product packaged with this limited warranty. (the “Product”). Your Product ,when delivered to you in new condition in its original packaging, is warranted against defects in materials or workmanship as follows: for a period of three (3) years from the date of original purchase, defective parts or a defective Product returned to LGE, or its authorized service providers, as applicable, and proven determine by LGE, or the authorized service provider. This limited warranty is conditioned upon proper storage, installation, use and maintenance complying with their respective published

operating, maintenance or environmental instructions prescribed by LGE in writing or services performed by someone other than LGE or an authorized service provider. To make a warranty claim, contact your local LGE sales representative. After contacting your local LGE sales representative, you will receive instructions regarding if, when and where to ship non-conforming Product. Failed

follow this procedure shall void this warranty. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE FORWHICHTHIS PRODUCT ISMANUFACTURED.NO IMPLIEDWARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANYPERSON OR ENTITY WITH RESPECT TOTHE PRODUCT SHALLBIND LGE.(SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS O THE ABOVE LIMITATION MAYNOT APPLY TOYOU.)

to be defective upon inspection, will be repaired, or exchanged for a new Product, as

N HOW LONG AN IMPLIEDWARRANTY LASTS, SO

※

This dimming terminal is for cable dimming control use (0-10V).

※

Please check the polarity of terminal as shown in the wiring diagram before connecting the dimming wires.

※

Do not connect line voltage to the dimming terminal. LGE is not liable for damage due to miswiring 0-10V dimming wires with line voltage.

※ ※

For more information, contact your local LGE sales representative.

http://www.lg.com/global/sustainability/environment/

P/No : MFL67182201 (REV07)