LG LDS5811BB, LDS5811ST, LDF9810ST, LDF8812ST, LDF7811BB Installation Guide

...
_/° / i_
III IRL
III"°
Dishwasher
MODEL : LDF7810WW/ LDF7810BB/ LDF7810ST
LDF7811WW/LDF7811BB / LDF7811ST LDS5811WW/ LDS5811BB/ LDS5811ST
LDF6810WW/LDF6810BB / LDF6810ST
Ifyou havequestions, call 1-800-243-0000 orvisitourwebsite at:http://www.lgservice.com
orhttp://us.lgservice.com
PART 1. SAFETY AND CAUTION ............................................................................................... 2
PART 2. DISHWASHER SPECIFICATIONS ................................................................................. 3
PART 3. TOOLS AND MATERIALS NEEDED ............................................................................. 4
PART 4. INSTALLATION INSTRUCTIONS ............................................................................ 5~11
IMPORTANT SAFETY INSTRUCTIONS
When installing and using your dishwasher, follow basic precautions, including the
following:
Disconnect electrical power before you start !
All electrical wiring and grounding should be done in accordance with national and local codes.
If electrical supply is damaged, it must only be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
This dishwasher must be connected to a hot water supply between 120°F (49 °C)-149°F (65 °C). This temperature range provides the best washing results and shortest cycle time.
Temperature should not exceed 149°F(65 °C) to prevent damage to dishes.
This appliance must be positioned close to an electrical power supply.
The appliance is to be connected to the water supply using new hoses. Old hoses should not be reused.
GROUNDING INSTRUCTIONS
For a permanently connected dishwasher:
This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the appliance.
2
Fully Integrated
LDF7810WW/BB/ST LDF7811WW/BB/ST LDF6810WW/BB/ST
Semi Integrated
LDS5811WW/BB/ST
Power supply: 120V, 60Hz AC only
Water Pressure: 20 - 120 psi (140 - 830 kPa)
Size: Fully / Semi (WxDxH): 23 7/8"x 24 5/8"x 33 7/8"
(606mm x 625mm x 860mm)
Inlet Water Temperature: 120°F (49°C)
Weight: 115 Ibs. (52kg, Fully- Integrated), 110 Ibs. (50kg, Semi-
Integrated) Specifications are subject to change to improve performance.
The features on your dishwasher may vary from the figure shown.
3-1/4"(83mm)
Product Dimension
1/5"(5mm)
Felt
(insulating
material) may be compressed
, 1
24-5/8"(625mm)
==
=20-3/8"(518mm) =
Water supply hose, Drain hose and Electric Cable
Should be passed through by this area
33-7/8" (860mm)
1-3/8"(35mm)
ii i ii ii ii ii ii ii ii
ii i i
_ _ _, _ _ [i¸__i_i...._
[Seepage8lor inslallalion delaill
INSTALL BRACKET WOOD SCREW
(Notprovided]
0
ELECTRICALCABLE
AIR GAP CONNECTOR
WATERSUPPLYTUBE ELBOW FORTUBE
TWIST-ON WIRE
yY
STANDARD PHILLIPS
SCREWDRIVER SCREWDRIVER
FITTINGS
HOSE CLAMP STRAINRELIEF ELECTRICAL TAPE
HOLE CUTTER ELECTRIC DRILL GLOVES
RUBBER
CONNECTOR
PLUMBERS'
TAPE
SAFETY GLASSES
ADJUSTABLE
WRENCH
NIPPER PLIERS WIRE STRIPPER
TAPE MEASURE CUTTING KNIFE LEVEL
4
TUBING CUTTER
Loading...
+ 8 hidden pages