LG LDF7810xx, LDF7811xx Service Manual

DISHWASHER
SERVICE MANUAL
NOTE
BEFORE SERVICING THE UNIT, PLEASE READ THIS MANUAL CAREFULLY FOR SAFETY AND CORRECT SERVICES.
MODEL : LDF7810WW / LDF7810BB / LDF7810ST
MODEL : LDF7811WW / LDF7811BB / LDF7811ST
LDS5811WW / LDS5811BB / LDS5811ST
CONTENTS
1. CAUTION......................................................................................................................... 4
2. SPECIFICATIONS........................................................................................................... 5
3. WIRING DIAGRAM........................................................................................................ 6
4. FEATURES & TECHNICAL EXPLANATION ................................................................... 7
5. PARTS NAME................................................................................................................ 13
6. PROGRAM CHART ..................................................................................................... 15
7. HOW TO DISASSEMBLE ............................................................................................ 16
8. TROUBLE SHOOTING METHODS.............................................................................. 25
A. TROUBLE SHOOTING ACCORDING TO DISPLAYED ERROR MESSAGE.......... 25
B. TROUBLE DIAGNOSES AND REPAIR BY SYMPTOM........................................... 27
9. INSTALLATION INSTRUCTION ................................................................................... 31
10. EXPLODED VIEW .......................................................................................................37
11. REPLACEMENT PART LIST ........................................................................................45
CAUTION !
DISCONNECT POWER CORD BEFORE SERVICING
RECONNECT ALL GROUNDING DEVICES
IMPORTANT SAFETY NOTICE !
This service information is intended for individuals possessing adequate backgrounds of electrical, electronic and mechanical experience. Any attempt to repair this appliance may result in personal injury and property damage. The manufacturer or seller can not be responsible for the interpretation of this information, nor can it assume any liability in connection with its use.
2. SPECIFICATION
ITEM
Rated Voltage / Frequency AC 120V/60Hz Installation Built-In Place Settings 16 Product Dimension(in) 23 7/8 Product Weight(lbs) 7811/7810 series : 115lbs, 5811 series : 110lbs Door Color White, Black, Stainless Tub Material Stainless Steel Control Electronic Rated Power(Watt) 1,350 Heater Power(Watt) 1,200 Programs 6 Upper Rack Position Adjustable Lower Rack 50% Fold down Water Consumption
SPECIFICATION
x 25〃x 33 7/8
21-30 (Normal)
Power Consumption(kWh/year) 370 Operating Time (min) 101-135 (Normal) Fan Dry System Yes Delay Start Function Yes Auto-Off Power Switch Yes Process Monitor Yes Wash Level 5 Racks Nylon Coating Operating Water Pressure (Bar) 20-120 (140-830kPa)
3. WIRING DIAGRAM
4. FEATURES & TECHNICAL EXPLANATION
Moist
Air
Dry
Air
Mixed
Air
to Upper Arm
to Lower Arm
4-1. Product Features
Ultra Big Capacity
If you raise the Upper Rack, you can load large dishes in the Lower Rack. (Max. 14 in.) The tall tub provides large dishes loading as well as large capacity. LG dishwashers let you load oversized items in the Lower and Upper Rack.
Slim Direct Inverter Motor
Newly introduced Slim Direct Inverter motor is inverter-controlled. Speed is controlled based on program selection. It also offers high energy efficiency to minimize energy loss.
Hybrid Drying System
Vario Spray System
Self Cleaning Filter
Soil Sensor
to Drain
Fine Mesh
This is one of the best performance solutions for drying dishes because it minimizes venting humid air to the outside of the dishwasher. In addition, this system ensures better drying results compared to the condensing drying system.
Because of alternating water spray between the Upper and Lower Rack, the water pressure allows superior performance and reduced consumption of water and electricity.
For best wash results, the self-cleaning filter system continuously cleans the water as it circulates. Your LG dishwasher has a self-cleaning filter that grinds food into small particles before it goes down the drain.
4-2. Display Panel
4-2-1. LDF 7811/7810 Series
Control panel may vary on some models.
INDICATOR
Child lock: Lamp will turn on when
Child Lock setting is on.
Rinse Aid: Refill with Rinse aid when Lamp turns on.
PROGRAM
• Press the program that corresponds to your desired wash cycle.
Soak
Power Scrub Normal
Delicate
Quick Wash
Rinse Only
This program is for very heavily soiled loads including pots, pans and casserole dishes which may have dry food residue.
This program is for very heavily soiled loads
This program is for normally soiled everyday loads.
This program is for washing delicate items like glasses.
This program is for that quick wash of lightly soiled recently used dishes and cutlery.
This program is for very lightly soiled loads.
CANCEL
To cancel a running
program, open the door, then press and hold the Normal and Delicate buttons for 3 seconds.
SPRAY
(INTENSITY)
DELAY START
POWER
Repeated pressing of the Spray button will select
Strong, Medium or Soft.
If you want to delay the start of a selected program, press the Delay Start button.
Each press of Delay Start will delay the start of the cycle by one hour.
The delay start time can be adjusted from 1 to 24 hours in one-hour increment.
For operating, press this button first for power on.
After operating, the power automatically switches off for safety and economy.
In case of an unusual Power surge or disturbance, the power may be automatically turned off for safety.
CHILD LOCK
Lock the control buttons to prevent the settings from being changed.
To lock/unlock, press Spray and Rinse buttons simultaneously for 3 seconds with door open.
SANITARY/
EXTRA RINSE
Repeated pressing of the Rinse button will select Sanitary, Extra Rinse or both.
If you select the function, the temperature of Heating Rinse can reach 161。F (72℃).
When you select Rinse, an additional rinse cycle is added.
Sanitary
Extra
HALF LOAD
In case of a small load, use the upper or lower rack only to save energy.
Each press of the Half Load button cycles between upper rack only and lower rack only.
If you don't press the dishwasher runs normally, i.e, operation of upper and lower spray arm alternating periodically.
Half Load,
Strong
Medium
Soft
Spray Rinse
Half Load
Sanitary Extra
Rinse
Upper
Lower
4-2-2. LDF 5811 Series
SPRAY
(INTENSITY)
Repeated pressing of the Spray button will select
Strong, Medium or Soft.
CHILD LOCK
Lock the control buttons to prevent the settings from being changed.
To lock/unlock, press Spray and Rinse buttons simultaneously for 3 seconds.
SANITARY/
EXTRA RINSE
Repeated pressing of the Rinse button will select Sanitary, Extra Rinse or both.
If you select the Sanitary function, the temperature of Heating Rinse can reach 161。F (72℃).
When you select Rinse, an additional rinse cycle is added.
- 10 -
Extra
HALF LOAD
In case of a small load, use the upper or lower rack only to save energy.
Each press of the Half Load button cycles between upper rack only and lower rack only.
If you don't press Half Load, the dishwasher runs normally, i.e, operation of upper and lower spray arm alternating periodically.
Soak
Power Scrub
Quick
Wash
Rinse
Only
Normal
Cancel
Delicate Power
Delay Start
INDICATOR
PROCESSING
INDICATOR
TIME LEFT
Child lock: Lamp will turn on when
Child Lock
setting is on.
Rinse Aid: Refill with Rinse aid when Lamp turns on.
Current program phase is indicated.
Before starting, the display window shows the running time of the selected program.
After starting, the display window shows the remaining time.
If the dishwasher has a trouble, the trouble type is displayed.
DELAY START
If you want to delay the start of a selected program, press the Delay Start button.
Each press of Delay Start will delay the start of the cycle by one hour.
The delay start time can be adjusted from 1 to 12 hours in one-hour increment.
CANCEL
To cancel a running program, press and hold the
Normal and
Delicate buttons
for 3 seconds.
- 11 -
PROGRAM
Press the program that corresponds to your desired wash cycle.
POWER
For operating, press this button first for power on.
After operating, the power automatically switches off for safety and economy.
In case of an unusual Power surge or disturbance, the power may be automatically turned off for safety.
4.3 TEST MODE
CHECK PROGRAM
BUTTON
Rinse + Time Delay + POWER S/W
Soak Power Scrub Normal Delicate Quick Wash Rinse Only Supply Rinse Half Load
Time Delay
The number of pushing button
1 TIME 1 TIME
1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME
2 TIME 3 TIME
4 TIME 5 TIME
6 TIME 7 TIME
8 TIME 9 TIME
10 TIME
11 TIME
12 TIME 13 TIME
Top
Display
11 22 33 44 55 66 77 88 99 31
32 33
34 35
36 37
38 39
3A
3b
3c
Front Display
n : 3H/U:023H/U2
1 : 11 2 : 22 3 : 33 4 : 44 5 : 55 6 : 66 7 : 77 8 : 88 9 : 99
Soil Level
n : 02 n : 03
Frequency
n : 05 n : 06 n : 07
n : 08
Temp. (
)
n : 0A
n : 0b
n : 0c
Load and Checking points
All LEDs are lighting Both All LEDs are lighting
All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting
Strong/Medium/Soft
Sanitary-Extra Rinse
Upper-Lower
Soil Sensor
Wash Pump
Delay Start
Child Lock + Rinse
Drain Pump
Inlet Valve
Rinse
Dispenser
Heater
(for 10 sec)
Fan
Wash-Rinse-Dry
Strong-Soft
Sanitary-Extra
Thermistor
Lower Nozzle
(VARIO)
Upper Nozzle
Upper-Lower
Soak-Normal
Delicate-Rinse
(VARIO)
Wash-Drain-
Water Supply
Rinse Aid
Auto-Off
Aid
Wash
Dry
Only
Door open/
closed
Both Both Both Both Both Both Both Both Both
Both Closed Closed
Both Closed
Closed Closed
Both Closed
Closed
Closed Closed
Normal Water Level : 315Pure Water : more than 229
Supply water before operating the Test Mode.
- 12 -
5. PARTS NAME
5-1. LDF 7811/7810 Series
Control PanelFront DisplayDoor HandleFront CoverLower CoverLeveling FootSide CabinetBaseTop Spray ArmUpper Spray Arm
Removable TinesLower Spray ArmDetergent & Rinse Aid DispenserVapor Vent CoverUpper RackCutlery BasketLower RackTop DisplayPower Button
INSTALL BRACKET WOOD SCREW
The appearance and specifications may be varied without notice according to localities.
- 13 -
4-2. LDF 5811 Series
Control PanelFront DisplayDoor HandlePower ButtonFront CoverLower CoverLeveling FootSide CabinetBase
Top Spray ArmUpper Spray ArmRemovable TinesLower Spray ArmDetergent & Rinse Aid DispenserVapor Vent CoverUpper RackCutlery BasketLower Rack
INSTALL BRACKET WOOD SCREW
The appearance and specifications may be varied without notice according to localities.
- 14 -
6. PROGRAM CHART(SCHEMATIC DIAGRAM)
W/Motor
Drain Pump
Inlet Valve
Heater
Vario Motor
Fan Motor
Dispenser
Thermal Act
Auto Off S/W
Rinse Only
Quick
Fine China
NORMAL
10 10
61
60 65
49 68
46 60
22 10 26
86 20
10
30 8 30 3 30
30
20
10 10 10 30
10 20
30
Power Scrub
Soak
49 65
18 10 10 38 10 10 26
63 68
72
30
26 10 10 46 10 10 30
30
Drain
Stop
Water Supply
Wash
Stop Drain Wash Drain Wash Drain
Water Supply
Drain
Water Supply
Wash
Stop Drain Wash Drain Wash Drain
Water Supply
Drain
Water Supply
Wash
Stop Drain Wash Drain Wash Drain
Water Supply
Drain
Water Supply
Wash
Stop Drain Wash Drain Wash Drain
Water Supply
Drain
Water Supply
Rinse
Stop Drain Wash Drain
Water Supply
Drain
Water Supply
Rinse
Stop Drain Wash Drain
Water Supply
Drain
Water Supply
Heating A Heating B
Stop Drain
Stop
Drain
Dry
Drain
Program
Drain A
Drain B Drain B
Drain B Drain B Drain C
Drain C
Drain D
Pre Wash 1 Pre Wash 2 Pre Wash 3
Wash
Program chart
Main Wash
Rinse 1 Rinse 2 Heating Rinse Dry
Rinse
Dry
- 15 -
7. HOW TO DISASSEMBLE
Lower Felt
Lower Cover
BEFORE DISASSEMBLING THE DISHWASHER ;
1) Remove the cord from electric outlet to avoid electric shock.
2) Close the Water Tap (faucet).
3) Remove all dishes and items in the dishwasher.
4) Remove the Lower Rack and the Upper Rack.
5) Remove the inlet hose and drain hose connetion to avoid the hose damages.
6) Prepare some towels to avoid floor wet by the water left in the dishwasher.
7-1. FULL DISASSEMBLE
1. Lower Cover and Lower Felt
1) Remove the front 2 screws.
2) Pull the Felt.
3) Remove the Inlet Hose and Power Supply Cable.
Cabinet-L
Tub Felt
Cabinet-R
2. Cabinet and Tub Felt
1) Cabinet-R
Remove front 2 screws. Remove rear 3 screws.
2)
Cabinet-L
Remove front 2 screws. Remove rear 3 screws.
Tub Felt
3)
- 16 -
Control Panel Front Cover
F
3-1. Door Assembly
(LDF7811/7810 Series)
1) Front Cover
Open the door. Remove 12 screws(stainless).
2) Control Panel Assembly
Remove 2 screws(Stainless).
Remove the wire connections.
Be sure the wiring should not be changed in reassembling
Remove the Latch assembly. Remove the Front Display. Remove 8 screws for Controller.
Controller
ront Display
Latch Assembly
Controller
- 17 -
Control Panel Front Cover
3-2. Door Assembly
(LDF 5811 Series)
1) Front Cover
Open the door. Remove 6 screws(Stainless).
2) Control Panel Assembly
Remove 8 screws(Stainless). Remove the wire connections. Be sure the wiring should not be
changed in reassembling Remove the Latch assembly. Remove 8 screws for Controller.
Controller
Latch Assembly
Controller
- 18 -
Loading...
+ 38 hidden pages