LG LDF7774ST, LDF8764ST, LDS5774ST User Manual

ENGLISH

FRANÇAISESPAÑOL

OWNER’S MANUAL

DISHWASHER

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

LDF8874ST LDF8764ST LDF7774ST/WW/BB LDS5774ST

P/No. : MFL62077193

www.lg.com

TABLE OF CONTENTS

3 IMPORTANT SAFETY INFORMATION

3 Basic Safety Precautions 4 Electrical Safety 5 Before Using the Dishwasher 5 Specifications

6 PARTS AND FEATURES

6 Features 7 Parts 8 Control Panel (steam models) 10 Control Panel (non-steam models) 12 Cycle Option Chart 12 Icons 13 Cycle Selection Chart

14 OPERATING INSTRUCTIONS

14 Quick Start 15 Loading the Lower Rack 16 Folding Down the Lower Tines 17 Loading the Silverware Basket 18 Loading the Upper Rack 18 Folding Down the Upper Tines 19 Height Adjustable Upper Rack 20 Loading the Cutlery Rack (on some models) 20 Height Adjustable Tray (on some models)

21 Adding Detergent to the Dispenser 22 Adding Rinse Aid to the Dispenser

28 TROUBLESHOOTING

28 Before Calling for Service

30 SMART DIAGNOSIS™ SYSTEM

31 WARRANTY

31 Product Registration Information

THANK YOU

Congratulations on your purchase and

welcome to the LG family. Your new LG

Dishwasher combines quiet, ecient

operation with advanced cleaning

technology. By following the operating

23 CARE AND CLEANING

23 Cleaning the Filters 24 Cleaning Metallic Parts 24 Cleaning the Lower Spray Arm 24 Cleaning the Upper Spray Arm 25 Cleaning the Top Spray Arm 25 Seasonal Maintenance and Storage

26 FAQS

and care instructions in this manual,

your dishwasher will provide you with

many years of reliable service.

IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY IMFORMATION

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage or serious bodily harm, even death.

The safety alert symbol will be followed by either the word “WARNING” or “CAUTION” then an important safety message. These words mean:

WARNING

CAUTION

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of re, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

Indicates the possibility of serious bodily harm or death.

Indicates the possibility of injury or damage to property.

ENGLISH

This manual contains very important information regarding the installation, use, and maintenance of your dishwasher. The manufacturer cannot be responsible for injuries or damage caused by failure to follow these safety and caution instructions.

• Read all instructions carefully before using the dishwasher.

• Use the dishwasher only for its intended function.

• Only use detergents or rinse agents recommended for use in a

dishwasher. Keep all dishwasher detergents and additives out of the reach of children.

• This appliance is not intended for use by young children.

• When loading items to be washed:

1) Load sharp items so that they are not likely to damage the door seal.

2) Load sharp knives with the handles up to reduce the risk of injury when reaching into the dishwasher.

y Do not wash plastic items in the dishwasher unless they are

labeled “dishwasher safe” or the equivalent. For plastic items that are not so labeled, check the manufacturer’s recommendations.

• Do not operate the dishwasher unless all enclosure panels are properly in place.

• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period of time, turn on all hot water faucets and let the water ow for several minutes. This will release any accumulated hydrogen gas. Since hydrogen gas is ammable, do not smoke or use an open ame during this time.

• Remove the door to the wash compartment when disposing of an old dishwasher.

• The installer must ensure that the dishwasher is completely enclosed at the time of installation.

• WARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

• Do not tamper with the controls.

• Do not abuse, sit on, or stand on the door or dish racks of the

dishwasher.

• To reduce the risk of injury, do not allow children to play in or around the dishwasher.

IMPORTANT SAFETY INFORMATION

BASIC SAFETY PRECAUTIONS

WARNING

For a permanently connected dishwasher:

This appliance must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance. Consult with a qualied electrician.

To reduce the risk of re, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

Tip Hazard

Do not put excessive downward force on the open dishwasher door prior to installation, as this could cause damage to the unit or cause it to tip over. Do not use the dishwasher before installation has been completed in accordance with the Installation Instructions.

ELECTRICAL SAFETY

WARNING

Electrical Shock Hazard

Failure to follow these instructions can result in death, re, or electrical shock.

• The dishwasher MUST be grounded. Connect the ground wire to the green ground connector in the terminal box.

• Do not use an extension cord with this appliance.

• The dishwasher is designed to be used with standard household current (120 Volts AC, 60Hz.). Before connecting the dishwasher, ensure

that the outlet or cable is properly grounded and polarized by circuit breakers or fuses. Failure to provide adequate grounding of this appliance may cause electrical shock or malfunction of the appliance. Consult with a qualied electrician.

• Do not install or store the dishwasher where it will be exposed to weather conditions. Failure to observe this precaution may result in electrical shock, re, malfunction, and/or deformation of the dishwasher.

• Do not damage or place heavy items on the power cord of the appliance. Do not use the dishwasher if it has a damaged power cord. Power cord damage may cause re and electrical shock. Consult with a qualied electrician.

• Do not grasp the power cord or touch the dishwasher controls with wet hands. Do not use the dishwasher if it has a damaged power cord or plug, and do not plug the dishwasher into a damaged outlet. Failure to observe these instructions may result in electrical shock.

• Disassembly or repair must be performed by experienced service persons. Improper disassembly or repair could lead to product failure or electrical shock.

BEFORE USING THE DISHWASHER

IMPORTANT SAFETY INFORMATION

ENGLISH

Before using the dishwasher, please read the Important Safety Instructions.

Water supply temperature should be a minimum of 120 °F (49 °C) for better washing and reasonable cycle time.

For this reason, use the hot water supply only. It is also important that the dishwasher is loaded according to instructions for eective cleaning. When loading the dishwasher, make sure that insoluble items such as bones, toothpicks, and pieces of paper have been removed.

SAVE THESE INSTRUCTIONS

When loading the dishwasher, observe the following general guidelines:

1. Place items with deep dish bottoms at an angle to help water run o and speed the drying process.

2. Remove solid, burned-on scraps from dishes prior to loading in the dishwasher.

3. Only load items that are dishwasher-safe.

NOTE

Do not load utensils that are not heat-resistant, have decorative metal trim, etc.

SPECIFICATIONS

• Power Supply: 120 V, 60 Hz AC only, minimum 15 A circuit breaker

• Water Pressure: 20–120 psi (140–830 kPa)

• Size (WxDxH): 23 3/4" x 24 5/8"x 33 1/2" (603 mm x 625 mm x 851 mm)

• Inlet Water Temperature: 120 °F (49 °C) minimum

• Product Weight : - LDF8874 : 100.5 lbs.(45.6 kg)

- LDF8764 : 92.1 lbs.(41.8 kg)

- LDF7774 : 96.6 lbs.(43.8 kg)

- LDS5774 : 94.9 lbs.(43.1 kg)

The appearance and specications are subject to change without notice.

PARTS AND FEATURES

FEATURES

LARGE CAPACITY

HYBRID DRYING SYSTEM

LG dishwashers allow you to load very large items in both the upper and lower racks. The tall tub provides extra overall capacity and the clearance to accommodate large dishes. Extra large items (max. 14 in.) may be loaded in the lower rack by raising the upper rack.

This system eectively dries dishes without the use of a heating element that would increase energy consumption.

STEAM WASHING (not available on all models)

Steam technology provides better cleaning performance than regular wash systems. Steam is the most energy efcient gentle care for your nest china and stemware.

VARIABLE SPRAY SYSTEM

Because the water spray alternates between the upper and lower racks, all of the power from the motor is directed to one rack at a time. This concentrates all the cleaning power of the motor on each rack in turn.

LIGHT TOUCH BUTTONS

The light touch buttons on the control panel make selections easy and convenient.

PARTS

PARTS AND FEATURES

ENGLISH

1. CONTROL PANEL

2. DOOR HANDLE

3. FRONT COVER

4. LOWER COVER

5. LEVELING FEET

6. FRONT DISPLAY SIGNALIGHT™

7. BASE

SignaLight (front display)

When a cycle is running, the SignaLight will illuminate for the active stage.

• Modelwith4LEDs:WASH–RINSE–DRY–CLEAN

• Modelswith2LEDs:OPERATING-CLEAN

• Modelswith1LED:OPERATING(Flickering)/CLEAN (Lighting)

Once the cycle is complete, the CLEAN light will illuminate for four minutes.

Meshlter

Outerlter

Stainless SteelFilter

8. TOP SPRAY ARM

9. UPPER SPRAY ARM

10. STEAM NOZZLE on steam models)

11. LOWER SPRAY ARM

12. DETERGENT AND RINSE AID DISPENSER

13. DRYING VENT COVER

14. CUTLERY RACK some models)

15. UPPER RACK

To keep the CLEAN light on until the door is open, turn the power on, and then press and hold the Extra dry and Half load buttons on the control panel simultaneously until Off or On appears in the display. The dishwasher will remember this setting until manually changed.

16. SILVERWARE BASKET

17. LOWER RACK

18. TOP DISPLAY

19. POWER BUTTON

20. FILTRATION SYSTEM

<ZI][M:MNZM[P;\MIUၦხ࿨ཅ૬໏ᅰ

PARTS AND FEATURES

CONTROL PANEL (steam models)

Steam Models (LDF8874, LDF8764)

Cycles

Select your desired cycle.

Auto

This cycle senses the load size, soil amount and soil toughness. This cycle is optimized to achieve the best cleaning.

Heavy

This cycle is for heavily and hard soiled dishes. Heavy defaults to the highest spray intensity and uses the power of steam to wash heavily soiled dishes.

Delicate

This cycle adds the gentle power of steam to boost the cleaning power of the delicate cycle. The cycle is intended for effectively cleaning delicate items such as ne china and stem-

ware.

Dual Control

This cycle washes the upper and lower racks at dierent spray intensities. The default setting for this cycle washes the lower rack with strong spray intensity and the upper rack with soft spray intensity. This provides optimum cleaning performance for mixed loads, including ne china and stemware. If other combinations are desired, use the steps listed below to change the intensities or to use the Half Load feature.

TO CANCEL A CYCLE

To cancel a cycle, open the door and then press and hold the Delicate and Dual Control Buttons together for approximately three seconds. The drain pump will activate and the cycle will cancel. The display will show “dr” and the dishwasher will drain the water. After the dishwasher is drained, the power will turn o. If the power is turned on and no cycle has been selected, the dishwasher will power o within four minutes.

Cycle Options

(Refer to the control panel on the next page)

Press the desired cycle and then select the options for that cycle.

Extra Dry

Select the Extra Dry option for better drying performance. This option adds 60 minutes of extra drying time to the cycle. The Extra Dry button will illuminate when the option has been selected.

Rinse

Repeated pressing of the Rinse button will select the desired Rinse option. The Sanitary, Extra Rinse, or Sanitary and Extra Rinse lights will show in the bottom left portion of the display.

HowToUseDualControl:

1. Select Dual Control.

2. Press the Spray button to toggle between Soft, Medium and Strong for the upper spray arm.

3. After making your selection for the upper spray arm, press the Half Load button.

4. Press the Spray button to toggle between Soft, Medium and Strong for the lower spray arm.

5. Close the door to start the cycle.

Normal

This cycle is for normally soiled, everyday loads.

Quick & Dry

This is a shortened c ycle that is intended for washing and drying recently used dishes or lightly soiled loads. During this cycle, both spray arms will run at the same time.

CHIME ON/OFF

To enable or disable the chime, rst, turn on the dishwasher. Press and hold the Delicate and Quick&Dry Buttons simultaneously for approximately three seconds.

Sanitary ( )

This high-temperature rinse sanitizes dishes and glassware in accordance with NSF/ANSI Standard 184 for residential dishwashers. Certied dishwashers are not intended for licensed food establishments.

Extra Rinse ( R+ )

The Extra Rinse symbol indicates that an extra rinse has been added to the cycle. An extra rinse can help reduce hard water spotting on dishes. To add an extra rinse, press the Rinse button repeatedly until the Extra Rinse symbol appears in the display.

Rinse Only (LDF****)

This cycle is a quick rinse for dishes that will not be washed immediately. This cycle will rinse dishes that have excess soil to soften dried on residue. Rinsing the dishes will help prevent odors in the dishwasher. No detergent should be used. To select the Rinse Only cycle, turn the dishwasher on, and press the Rinse button once without pressing any other cycle buttons. The Rinse Only cycle is not available with any other cycles.

CONTROL PANEL

Display varies by model (LDF8874, LDF8764)

Display varies by model (LDF7774)

PARTS AND FEATURES

ENGLISH

Spray (INTENSITY)

First, select the desired cycle. Press the Spray button repeatedly until the desired spray intensity is selected.

Soft ( ), Medium ( ), Strong ( )

Half Load

For small loads, you may use just the upper or lower rack to save energy. Each press of the Half Load button cycles between upper rack only and lower rack only.

Delay Start

The Delay Start feature allows you to delay the start of a selected cycle. Each time the Delay Start button is pressed, the delay time will increase an hour. The delay start time can be set from 1 to 19 hours, in one-hour increments.

High Temp ON/OFF

Raises the main wash temperature to improve cleaning. Press and hold the Extra Dry and Rinse buttons simultaneously for approximately three seconds.

Child Lock

The Child Lock feature helps prevent your settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the POWER button, on the control panel. This feature does not lock the door.

ToactivatetheChildLock:

1. Open the dishwasher door.

2. Press the POWER button.

3. Select the cycle (and desired options).

4. Press and hold the Rinse and Spray buttons for three seconds. The Child Lock indicator will illuminate in the display once the Child Lock is activated.

5. Close the door to begin the cycle.

Digital Display

The Digital Display on the control panel shows the ESTIMATED cycle time. When the dishwasher is powered up, the display will be blank. When the cycle and options are selected, the display will show the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time.

NOTE

• The estimated time shown in the display does not include delay times for heating water, etc.

• If Delay Start is selected, the display shows the delay time in hours.

• Time may vary depending on the soil level of your load.

Energy Saving

The Energy Saving option saves energy by using less water. This option should only be used with light to medium soiled dishes.

NOTE

The RINSE AID symbol indicates that the rinse aid needs to be relled.

POWER

• Press the POWER button to turn on the control panel. If no cycle is selected within four minutes, the dishwasher will power o.

• After the cycle is complete, the power automatically turns o for purposes of safety and economy.

• If there is a power surge, power outage, or disruption of any kind, the PF indicator will display and power will be automatically turned o for safety. The cycle will need to be restarted.

Smart Diagnosis

Should you experience any problems with your dishwasher, it has the capability of transmitting data to your Smart Phone using the LG Smart Laundry & DW Application or via your telephone to the LG call center.

WARNING

Steam can cause burns. Use caution in the area of the steam nozzle, on the left side of the dishwasher, if the door is opened during the steam portion of a cycle. Contact with the steam or the steam nozzle can cause burns.

<ZI][M:MNZM[P;\MIUၦხ࿨ཅ૬໏ᅰ

<ZI][M:MNZM[P6WV[\MIUၦხ࿨ཅ૬໏ᅰ

PARTS AND FEATURES

CONTROL PANEL (non-steam models)

Display varies by model (LDF7774)

Display varies by model (LDS5774)

Cycles

Select your desired cycle.

Auto

This cycle senses the load size, soil amount and soil toughness. This cycle is optimized to achieve the best cleaning.

Heavy

This cycle is for heavily and hard soiled dishes.

Delicate

The cycle is intended for eectively cleaning delicate items such as ne china and stemware.

Dual Control

HowToUseDualControl:

1. Select Dual Control.

2. Press the Spray button to toggle between Soft, Medium and Strong for the upper spray arm.

3. After making your selection for the upper spray arm, press the Half Load button.

Normal

This cycle is for normally soiled, everyday loads.

Quick & Dry

This is a shortened c ycle that is intended for washing and drying recently used dishes or lightly soiled loads. During this cycle, both spray arms will run at the same time.

Rinse Only (LDS5774)

CHIME ON/OFF

To enable or disable the chime, rst, turn on the dishwasher. Press and hold the Delicate and Quick&Dry But tons (LDS5774: Spray and Delay Start) simultaneously for approximately three seconds.

TO CANCEL A CYCLE

To cancel a cycle, open the door and then press and hold the Delicate and Dual Control Buttons (LDS5774: Spray and Half Load) together for approximately three seconds. The drain pump will activate and the cycle will cancel. The display will show “dr” and the dishwasher will drain the water. After the dishwasher is drained, the power will turn o.

If the power is turned on and no cycle has been selected, the dishwasher will power o within four minutes.

4. Press the Spray button to toggle between Soft, Medium and Strong for the lower spray arm.

5. Close the door to start the cycle.

CONTROL PANEL

Display varies by model (LDS5774)

PARTS AND FEATURES

ENGLISH

Cycle Options

Press the desired cycle and then select the options for that cycle.

Extra Dry ( )

Select the Extra Dry option for better drying performance. This option adds 60 minutes of extra drying time to the cycle. The Extra Dry button will illuminate when the option has been selected. Press and hold the Rinse and Spray but tons for three seconds.

Rinse

Repeated pressing of the Rinse button will select the desired Rinse option. The Sanitary, Extra Rinse, or Sanitary and Extra Rinse lights will show in the bottom left portion of the display.

Sanitary ( )

Extra Rinse ( R+ )

Spray (INTENSITY)

First, select the desired cycle. Press the Spray button repeatedly until the desired spray intensity is selected.

Soft ( ), Medium ( ), Strong ( )

Half Load ( )

For small loads, you may use just the upper or lower rack to save energy. Each press of the Half Load button cycles between upper rack only and lower rack only.

Delay Start

The Delay Start feature allows you to delay the start of a selected cycle. Each time the Delay Start button is pressed, the delay time will increase an hour. The delay star t time can be set from 1 to 19 hours, in one-hour increments.

Child Lock

ToactivatetheChildLock:

1. Press the POWER button.

2. Select the cycle (and desired options).

3. Press and hold the Half Load and Delay Start buttons for three seconds. The Child Lock indicator will illuminate in the display once the Child Lock is activated.

4. Close the door to begin the cycle.

Digital Display

NOTE

• The estimated time shown in the display does not include delay times for heating water, etc.

• If Delay Start is selected, the display shows the delay time in hours.

• Time may vary depending on the soil level of your load.

POWER

• Press the POWER button to turn on the control panel. If no cycle is selected within four minutes, the dishwasher will power o.

• After the cycle is complete, the power automatically turns o for purposes of safety and economy.

• If there is a power surge, power outage, or disruption of any kind, the PF indicator will display and power will be automatically turned o for safety. The cycle will need to be restarted.

Smart Diagnosis

PARTS AND FEATURES

CYCLE OPTION CHART

The cycle guide below shows the available options for each cycle.

Available

Cycle

SprayLevel

(defaultbold)

Soft

Auto

Medium

Strong

Heavy Strong

Delicate

Soft

Medium

Soft

(upper arm)

Dual

Control

Medium

Strong

(lower arm)

Soft

Normal

Medium

Strong

Quick&Dry Strong

ExtraDry

Sanitary

Rinse

ExtraRinse

Sanitary/

ExtraRinse

HalfLoad DelayStart

Energy Saving

High

Temp

RinseOnly

ICONS

Medium

Strong

Steam Cycle (steam models)

Extra Rinse

Sanitary Rinse

Low, Medium, High Spray, Intensity

Child Lock

Upper

Lower

*Apply to LDS****

Low Rinse Aid Indicator

Energy Saving Cycle

Cycle Time Indicator

*Upper Spray Arm

*Lower Spray Arm

*Extra Dry

CYCLE SELECTION CHART

The cycle guide below shows the default settings for each cycle.

PARTS AND FEATURES

ENGLISH

Cycle

Auto

Heavy

Delicate

Dual

Control

Normal

Quick &Dry

Wash Rinse

Pre1 Pre2 Pre3

Main

Wash

122 F

50 C

140 F

60 C

122 F

50 C

154 F

68 C

86–122 F

30–50 C

122 F

50 C

Rinse1 Rinse2

Heated

Rinse

149 ~158 F

65~70 C

158 F

70 C

154 F

68 C

158 F

70 C

149 –158 F

65–70 C

162 F

72 C

Dry

*WaterUs-

age

6.1 gal. 23 L

6.1 gal.

23.0 L

4.6 gal.

17. 5 L

4.6 gal.

17. 5 L

1.7–6.4 gal.

6.5–20.5 L

7.6 g a l. 29 L

**Cycle

Time

135 Min. Medium

166 Min. Strong

141 Min. Soft

147 Min.

110 ~139

Min.

79 Min. Strong

SprayInten-

sity

U: Strong

L: Soft

Medium

Rinse

Only

* Actual water consumption will vary depending on soil level and water hardness.

** Actual cycle times may vary depending on soil level, water temperature and water hardness

1.0 gal.

4 L

22 Min. Medium

OPERATING INSTRUCTIONS

QUICK START

1. LOAD THE DISHES

Scrape the dishes free of excess food, bones, and any other hard, non-soluble residue. Pull each rack out and load the dishes as described in this manual.

2. MEASURE THE DETERGENT

Using the guidelines in this manual, ll the detergent cup with the recommended amount of detergent and close the lid. If a prewash is desired, the recess on top of the lid should also be lled with detergent.

3. TURN ON THE DISHWASHER

To turn on the display panel, press the POWER button.

4. CHECK THE RINSE AID

The Rinse Aid indicator light will illuminate if the level of rinse aid in the dishwasher is low. Add rinse aid if the level is low to maintain the eectiveness of the dry cycle.

5. SELECT THE CYCLE AND OPTIONS

Select the cycle and options that best t the load by referring to the Cycle Selection Chart. The display will show the estimated time for the cycle and options selected.

6. CLOSE THE DOOR

CAUTION

Empty the lower rack rst and then the upper rack. This will avoid water dripping from the upper rack onto dishes in the lower rack.

WARNING

In general, it is not advisable to open the door while the dishwasher is in operation. If the door is opened, a safety device stops the dishwasher. Care should be taken when opening the door immediately following the cycle, as steam may escape.

AUTO-OFF

The dishwasher will automatically turn o if a cycle is not selected or if the door is not closed within four minutes.

The dishwasher will start automatically, after a slight delay, when the door is closed and latched. During the cycle, the display will indicate the estimated time remaining for the cycle and options selected. If the door is opened during the cycle, the dishwasher will stop. When the door is closed, the cycle will resume from the point where it was stopped.

7. END OF CYCLE

When the cycle is complete, a chime will sound and the display will show “END.” After a short time, the display and controls will shut o for safety and energy conservation.

OPERATING INSTRUCTIONS

LOADING THE LOWER RACK

CAUTION

NON-DISHWASHER SAFE ITEMS

The combination of high water temperature and dishwasher detergents may damage certain items. LG does not recommend washing the following items in the dishwasher:

• Hand painted silver or gold leaf dishes

• Wood or bone handled utensils

• Iron or other rust prone utensils

• Plastic items that are not dishwasher safe

When in doubt, check the manufacturers’ recommendations.

The extra tall tub allows loading of dishes, pans, or other utensils up to 14 inches high.

The lower rack is recommended for dinner plates, soup bowls, dishes, pots, pans, lids, and grill trays. Plates should be positioned vertically and facing the center of the rack. Pots, pans, and large bowls must be turned so that the inside faces downward. The silverware basket may be used in either the lower or upper rack.

ENGLISH

The lower rack should not be used for small items such as cups, wine glasses, or small plates. These items should be loaded in the upper rack.

For models with steam, load heavily soiled or stained dishes in the front left side of the lower rack with the dirty side facing down. This is the area that the stream enters the dishwasher. The use of hot steam maximizes the dishwasher’s cleaning performance.

SUGGESTED LOADING PATTERN

RACK LOADING TIPS

y Load plates, soup bowls etc. between the tines. y Load cookie sheets, cake pans and other large items on the

sides or back of the rack. Loading these items in the front of the dishwasher can prevent the water spray from reaching the detergent dispenser.

y Make sure that pot handles and other large items do not stop

the rotation of the spray arms.

ADDITIONAL LOADING PATTERN

NOTE

Make sure that large items do not interfere with the rotation of the spray arms, and do not prevent the detergent dispenser from opening.

OPERATING INSTRUCTIONS

FOLDING DOWN THE LOWER TINES

The tines are adjustable to t dishes of various sizes.

LOADING DISHES & POTS

Rear

Front

LOADING POTS & BOWLS

DIFFICULT TO REMOVE FOOD ON DISHES (steam models)

Load items with dicult to remove or baked-on food near the steam spray arms, towards the left side of the lower rack, facing down. The dishes will benet from the direct steam spray and the lower spray arm wash action.

OPERATING INSTRUCTIONS

LOADING THE SILVERWARE BASKET

The silverware basket has separators to avoid scratching and tarnishing of delicate silverware. The basket can be separated into three separate baskets that can be used individually in both the upper and lower racks. Unlock the tabs above the left and right sides to separate.

WARNING

Be careful when loading and unloading sharp items. Load sharp knives with the handles up to reduce the risk of personal injury.

SILVERWARE LOADING TIPS:

y For best cleaning results, use the top separators in the basket

when loading silverware. The separators will prevent nesting

of silverware. y Load sharp items, such as knives, pointing down. y When unloading the dishwasher, it is best to start with the sil-

verware basket. Doing so will prevent water droplets from fall-

ing on your silverware from the upper rack.

2 2 2 2 2 2 2 2 2 2 2 2 2 2 5 5 5 5

3 3

4 444 4 4 4 4

3 3 S S

4 4 4 4 4 4

3 3 3 3 3 3 3 3

① ③ ④ ⑤②

5 5 5 5 5 5 5 5 5 5

S S S S S SSS 1 1 1 1 1 1 1 1 1 1 1 1

3 3 1 1

ENGLISH

OPERATING INSTRUCTIONS

LOADING THE UPPER RACK

Use the upper rack for small or delicate items such as small plates, cups, saucers, glasses, and dishwasher-safe plastic items. Cups, glasses, and bowls must be positioned upside down. Extra cups or cooking utensils can be laid on the fold down cup racks, which may also provide support for long stemmed glasses. Make sure items do not interfere with the rotation of the spray arms above and below the upper rack.

SUGGESTED LOADING PATTERN

NOTE

When loading larger items in the upper rack, such

as wine glasses or taller cups, it may be necessary to remove the cutlery rack.

ADDITIONAL LOADING PATTERN

UPPER RACK LOADING TIPS:

y Place cups and glasses in the rows between the rack tines. Plac-

ing them over the rack tines can lead to breakage and water

spots. y To avoid chipping, do not let stem ware touch other items. y Place items so that the open end faces down for cleaning and

drying. y Do not stack items on top of each other.

FOLDING DOWN THE UPPER TINES

Pull up the tine

The tines can be adjusted up or down. The right side tines have handles for wider or small dishes.

Rotate the tine

OPERATING INSTRUCTIONS

HEIGHT ADJUSTABLE UPPER RACK

The upper rack adjusts up and down. Adjust the upper rack up to allow tall and oversized items of up to 14 inches high in the lower rack. Adjust the upper rack down to allow placement of large dishes of up to 12 inches high in the upper rack. The upper rack comes in the upper position.

ENGLISH

NOTE

After adjusting, make sure that dishes in the upper and lower racks do not interfere with the rotation of the spray arm. Do not adjust the rack while it is loaded with dishes.

To lower the rack:

Hold the rack at the center of each side to support its weight. Then, lift the lever on each side to release the rack and lower it to the lower position.

To raise the rack:

Simply lift the rack at the center of each side (see illustration) until the rack locks into place in the upper position. It is not necessary to lift the lock levers to raise the rack

Alternate

OPERATING INSTRUCTIONS

LOADING THE CUTLERY RACK (on some models)

The cutlery rack is best suited for washing atware and most cooking or serving utensils. The separators on the cutlery racks help keep atware separated to avoid damage and improve cleaning. The rack can also accommodate small prep bowls and lids. Using the rack allows you to remove the silverware baskets from the lower racks.

NOTE: For best cleaning performance, place atware in the silverware baskets. Heavily soiled utensils or items with baked on foods should be placed in the middle rack or spoon basket for best performance.

HEIGHT ADJUSTABLE TRAY (on some models)

Each side tray can be adjusted independently to a high or low position to accommodate dierent sizes of utensils or cutlery. Remove dishes before adjusting the tray.

④

③

①

⑤

②

Sample 10-place setting.

⑤

④

③

②

①

Right Wrong

If the handles of your atware are too thick, then reverse the pieces so that the handles face the other direction, as shown in the bottom gure.

Each tray is adjusted by lifting it out and rotating it front to back.

Removing the Cutlery Rack

The entire cutlery rack can be removed if more space is needed on the upper rack for larger items.

NOTE

Always remove the cutlery from the rack before removing

the rack.

Pull the rack out to the end of the rails. Then, lift the front of the rack so that the rollers clear the stop on the end of the rail. The rack can now be slid forward and removed from the rails.

WARNING

Be careful when loading and unloading sharp edged items. Load sharp knives with the blade down to reduce the risk of injury.

ADDING DETERGENT TO THE DISPENSER

OPERATING INSTRUCTIONS

ENGLISH

• Only use detergent intended for automatic dishwashers.

• Detergent must be put into the detergent compartment be-

fore starting any cycle, except the Rinse Only cycle.

• Use less detergent if the dishes are only lightly soiled. Using excess detergent can leave a lm on dishes and in the dishwasher resulting in poor wash performance.

• The amount of detergent needed depends on the cycle, load size, and soil level of dishes.

NOTE

Remove the label on the dispenser prior to running the dishwasher.

Push button to open

If the lid is closed, press the lever on the bottom side of the lid to open the dispenser.

NOTE

DO NOT add detergent when the Rinse Only cycle is selected.

Pre wash Compartment

Place proper detergent into this compartment

If a prewash is desired, ll the recessed prewash com-

partment area in the lid with detergent.

NOTE

Too much detergent can leave a lm on dishes and in the dishwasher, resulting in poor wash performance. Do not use detergent tablets for shorter wash cycles. The tablet may not dissolve completely, causing detergent residue on dishes and inecient cleaning.

Main wash Compartment

Place proper detergent into this compartment

Add dish washing detergent to the main wash compart-

ment until the level is between the lines marked 20 and

30. Fill to the 30 line for hard water or heavily soiled loads. Fill to the 20 line for soft water or lightly soiled loads.

Close the lid rmly until it clicks.

CAUTION

DETERGENT INFORMATION

Use only detergent intended for automatic dishwashers. Incorrect detergent may cause the dishwasher to ll with suds during operation. Excess sudsing may reduce wash performance and may cause the dishwasher to leak. DO NOT use hand dish washing detergent in this dishwasher.

OPERATING INSTRUCTIONS

ADDING RINSE AID TO THE DISPENSER

The Low Rinse Aid indicator will appear in the display when

more rinse aid is needed.

Only use liquid rinse aid in this dishwasher. The use of rinse aid is recommended to prevent water droplet spots on dishes and to enhance the drying performance.

Close the lid to lock the dispenser. Rinse aid will be

dispensed automatically during the nal rinse cycle.

RINSE AID DISPENSER ADJUSTMENT

Push button to open lid.

Add a liquid rinse aid to the maximum ll level. When

lling the rinse aid dispenser, aim the rinse aid at the arrow. Make sure that the rinse aid is settled in the dispenser while lling.

Rinse-Aid Indicator

Adjust Lever (Rinse)

The rinse aid dispenser is set to level 3, which should provide the best performance under most conditions. Adjust the setting higher if you have hard water and notice calcium buildup on your dishes.

If you notice lm on your dishes, use a lower setting. Setting the rinse aid control too low will contribute to spotting and streaking of dishes and poor drying performance. Setting the control too high can cause foaming, which will cause poor wash per formance.

To adjust the rinse aid dispenser setting, remove the cap and adjust the rinse aid lever to the desired setting. Point the arrow to the left for a lower setting, right for a higher setting.

REFILLING THE RINSE AID

The regularity of the dispenser needing to be relled depends on how often dishes are washed and the rinse aid setting used. If the rinse aid level is low, the Rinse Aid light on the control panel will illuminate.

RINSE AID FILLING TIPS:

y The Low Rinse Aid indicator will appear in the display

when more rinse aid is needed. y Do not overll the rinse aid dispenser. y Clean up any spilled rinse aid to prevent sudsing.

CARE & CLEANING

For best results, it is important to periodically check and care for the spray arms.

WARNING

To prevent injury during care and maintenance/cleaning, wear gloves and/or protective clothing.

CLEANING THE FILTERS

1. Remove the lower rack rst.

2. Turn the mesh lter counterclockwise.

3. Take out the mesh lter, Stainless Steel Filter and outer lter.

4. Clean them if necessary.

5. Replace them in the reverse order.

NOTE

•For best wash performance, clean the lter after each load. If food debris remains in the lter, it may cause odor.

•Before starting a cycle, make sure that the lter is assembled correctly. If the lter is not assembled you may experience poor cleaning results.

correctly

All three lters should be cleaned according to the chart recommendations below. Clean the lters using non-abrasive materials and warm running water. A soft brush may be required to get hard to remove soil.

Mesh

Filter

Outer

Filter

Stainless SteelFilter

ENGLISH

•If you have hard water, cleaning this lter at least once a month is recommended.

Recommendedltercleaningchart:

NumberofLoads PerWeek

1-3 Every 6 months Once a year Four times a year Once a month

4-7 Every 6 months Once a year Four times a year

8-12 Every 6 months Every 6 months Every 1.5 months Every week

13-14 Every 6 months Every 6 months Every 1.5 months Twice a week

Ifyouwashdishes beforeloading

Ifyouscrapeandrinse dishesbeforeloading

CAUTION

• A soft brush may be required when cleaning the Stainless steel lter.

• Be cautious of sharp edges when handling the Stainless steel lter.

Ifyouonlyscrape dishesbeforeloading

Ifyoudonotscrape orrinsedishesbefore loading

Twice a month (every 15 days)

CARE & CLEANING

CLEANING THE INTERIOR

y Clean the interior of your dishwasher periodically

with a soft, damp cloth or sponge to remove food and dirt particles.

y To remove white spots and odor from inside the dish-

washer, run an empty cycle with detergent or run an empty cycle with one cup of white vinegar in a dishwasher safe glass or bowl placed on the upper rack. (Vinegar is an acid and with constant use it could damage your appliance.)

CLEANING THE LOWER SPRAY ARM

CLEANING THE EXTERIOR

y In most cases, the exterior of your dishwasher can be

cleaned with a soft damp cloth or sponge, then dried with a soft cloth. If your dishwasher has a stainless steel exterior, a stainless steel cleaner is recommended.

y Make sure that the water jet holes are not blocked by food

particles.

y When cleaning is necessary, remove the lower spray arm by

pulling up.

y After cleaning the lower spray arm, replace it by pushing

down until it clips into place. Be sure that the spray arm is able to turn freely.

CLEANING THE UPPER SPRAY ARM

• Pull the upper rack forward. Make sure that the water jet holes are not blocked by food particles.

• When cleaning is necessary, remove the upper spray arm by turning the nut on the bottom of the spray arm 1/8 turn counterclockwise and pulling down.

• After cleaning the upper spray arm, press it up into place. Turn the nut 1/8 turn clockwise to make sure that the nut locks back into place.

CLEANING THE TOP SPRAY ARM

CARE & CLEANING

ENGLISH

Make sure that the water jet holes are not blocked

by food particles. When cleaning is necessary, use a screwdriver to release the retainer clip from the bracket that holds the top spray arm assembly to the tub.

Pull the spray arm out.

After cleaning the top spray arm, replace it. Slide it back into place and make sure the retainer clip engages.

SEASONAL MAINTENANCE AND STORAGE

• If you will be absent for an extended period of time during warmer months, it is recommended that you close the water valve and unplug the power cord, or turn o the circuit breaker. Clean the lter, tub and dispenser to prevent odors.

• If you will be absent for an extended period of time during colder months, and there is a possibility of freezing temperatures, it is recommended that you winterize the water supply lines and the dishwasher itself. Winterization must be performed by experienced service personnel.

FAQ S

FAQs

COMMON PRODUCT QUESTIONS

Is a rinse aid required to be used?

Rinse aid is strongly recommended to enhance the drying performance of the dishwasher. In order to be more energy ecient, the hybrid drying system does not utilize a heating element in order to assist in drying, so a rinse aid plays an integral role in the drying process. If a rinse aid is not used, water may remain on the dishes and the tub. Rinse aid will help to ensure that the majority of the water has been sheeted o of the dishes at the end of the rinse and that the load is ready for the dry cycle.

What can be done if my dishes have a cloudy, white lm on them after a wash?

The cloudy lm is usually caused by minerals in the water reacting with the dishwasher detergent. First, be certain not to use too much detergent. Refer to the owner’s manual for recommended detergent amounts by cycle. Add an Extra Rinse to the cycle, or run a Heavy cycle. LG Dishwashers use less water than traditional dishwashers, so adding an Extra Rinse will aid in rinsing the lm away. If the water supply is hard, it may be necessary to add a performance booster that addresses the hard water condition.

What is the Sanitary Rinse and how is it activated?

The Sanitary Rinse will increase the heated rinse to approximately 161°F (72°C). The normal heated rinse temperature will vary from cycle to cycle.

What steps can I take to improve drying results?

Drying performance is directly aected by the amount of heat that remains in the tub after the heated rinse is performed. If your dishwasher is far away from your home’s hot water heater, it may be necessary to run the hot water tap in the sink before starting a wash cycle, to ensure that cool water is purged from the hot water lines. This will ensure your dishwasher has a consistent supply of hot water from start to nish. Using the Sanitary Rinse setting will also aid in keeping the inner drum temperature and dishes hotter before drying begins.

LG dishwashers are designed to be used in conjunction with a rinse aid. Using a rinse aid will maximize the amount of water that has already been sheeted away from the dishes before the dry cycle begins. If a rinse aid is used and the performance still needs a boost, adjust the amount of rinse aid used by the indicator on the rinse aid cap. 4 is the default setting, but if necessary, set the level to 5 so more rinse aid will be used.

Allow the dishwasher to completely nish the dry cycle before opening the door. If the door is opened mid dry cycle, the heat that is necessary for the hybrid dry system to work will escape. This will cause all of the dishes inside to remain wet once the cycle nishes.

What is the hybrid drying system?

The dishwasher does not rely on a heating element for the drying process; instead, it relies on the heat that is retained by the dishes and the tub during the wash and rinse cycles to turn the moisture in the tub into humidity. Warm, moist air in the dishwasher is then pulled into a condensing duct in the door by a fan. The air then cools, which causes the humidity to condense. Room temperature air is also drawn into the duct to help the air cool down faster. When this moisture condenses into a liquid, it is drained out.

NOTE

Rinse aid is required to enhance the drying perfor-

mance. If no rinse aid is used, water may remain on the dishes and the tub.

Why is there a whistling sound?

It is important to determine how long the noise occurs and when it happens (what part of the cycle). When water is drawn into the dishwasher, a whistling noise can be heard. This is normal. If the water pressure is too high, it will be louder so it may be necessary to adjust the water valve to lower the pressure if the noise is too loud.

What is Dual Control?

Dual Control is an option that can be utilized during wash cycles. This option enables you to fully customize the wash cycle intensity for the upper and lower racks, independently, in the same load. For example, by selecting a soft spray for the upper rack and strong spray for the lower rack, you can wash delicate stemware in the upper rack while washing pots and pans in the lower rack.

What kind of dishes can be placed in the dishwasher?

Ensure that the dishes you place in the dishwasher are dishwasher safe. Plastic dishware will not dry as eectively as glass and metal dishware. Plastic items do not retain heat as well as glass and metal dishware. Plastic cups and dishes may require some hand drying before being put away at the end of the cycle.

Can I perform a drain only cycle?

The dishwasher does not have a drain only function; however, the dishwasher will drain on its own for the rst 45 seconds of a new cycle. To drain standing water, select a wash cycle and let it run for only 45 seconds. Then, turn the unit o and let it reset. Repeat as necessary.

FAQ S

How long does the clean indicator stay lit after the cycle is complete?

The clean light indicator on the dishwasher will stay lit for 4 minutes before turning o. You can, however, program the dishwasher so that the clean light stays on until the dishwasher door opens.

Why does my dishwasher continuously beep if I open the door during a cycle or right after the cycle has nished?

This is normal. The dishwasher is letting you know that the interior temperatures of the unit are hot and to use caution when placing your hands inside. Once the unit has cooled down, the beeping will stop.

PRODUCT FEATURES AND OPERATION

What is the benet of steam?

Steam allows for thorough cleaning of baked on foods while using less water than other power scrub methods. Steam also allows for enhanced cleaning per formance when cleaning ne china and stemware items on a delicate cycle. Stream particles are smaller and more active so their penetrating power is more eective. Steam also increases the interior temperature of the dishwasher, which helps in melting oily or waxy substances, like lipstick along the rim of a glass.

What is Child Lock and how is it activated?

Child Lock is a feature that will prevent the controls from being changed during the cycle. It does not prevent the door from being opened or the unit from being powered o. To activate or deactivate, press the Spray and Rinse buttons (LDS5774 : Half Load and Delay Start buttons) simultaneously for 3 seconds.

Why is “PF” showing up on the display?

PF is not an error code indicating a malfunction. PF indicates that there was a power failure. This function protects the dishwasher in the event that the power goes out or the power to the unit is disrupted. When power is returned and a button is pushed, this will display for 10 seconds and then go away.

ENGLISH

INSTALLATION

What size is the 90° elbow?

The 90° elbow should have a 3/8” NPT on the end that connects to the dishwasher.

Can I add an extension to the drain hose?

No, an extension cannot be added.

TROUBLESHOOTING

BEFORE CALLING FOR SERVICE

Problem Possible Causes Solutions

Door is not completely closed.

Dishwasher will not operate

Power supply or power cord is not connected.

Fuse is blown or circuit breaker tripped. Replace the fuse or reset the circuit breaker.

Make sure that the door is completely closed and latched.

Connect the power supply or cord properly.

Dishwasher operates too long

Odor

Water remains in tub after completion of cycle

Spots and lming on dishes

Dishwasher is connected to cold water.

The previous cycle was stopped before completion and residual water remains in the dishwasher.

There is food in the bottom of the unit or in the lter.

Unwashed dishes are left in the unit for a long time.

Drain hose is kinked or clogged. Adjust hose or clear blockage.

Low water temperature.

Wrong amount of detergent used. Use the recommended amount of detergent.

Overloading. Do not overload the dishwasher.

Improper loading. See the Using Your Dishwasher section.

Insucient water pressure. Water pressure should be between 20 and 120 psi.

Insucient detergent.

Rinse aid dispenser is empty. Rell rinse aid dispenser.

Extremely hard water

The best way to eliminate spots on your dishes is to install a whole house water softener in your home. If a water softener is already installed or you do not plan on installing one, try adding the “Extra Rinse” option as part of the wash cycle to help minimize this condition. To add an extra rinse to the cycle, select the wash cycle and then press the RINSE button.

NOTE: Selecting “Extra Rinse” will increase cycle times and water usage. To remove hard water build up in the tub

Remove all dishes, silverware and the silverware holder from the dishwasher. Only the racks should remain in the tub.

Fill a measuring cup with white vinegar, approximately 14~17 ounces (400~500mL), and place the measuring cup in the lower rack.

Run a Normal cycle and select ExtraRinse and Sanitary then close the door. DO NOT USE DETERGENT

NOTE: Make sure to let the dishwasher complete the entire cycle. This cleaning method should only be done as needed.

Check the water supply connection or water heater setting. (Heating cold water takes longer.)

Turn on the power, run the Cancel cycle option to remove the residual water, then run the Quick cycle using detergent but with the dishwasher empty.

Clean the lter and the interior according to the “Care and Cleaning” section of the owner’s manual.

Run an empty cycle with detergent, or run an empty cycle with one cup of white vinegar in a dishwasher safe glass or bowl placed on the upper rack.

(Vinegar is an acid, and with constant use it could damage your appliance.)

Water supply should be at least 120°F for best wash performance.

Add the recommended amount of detergent. See the Using Your Dishwasher section.

If you have followed this troubleshooting guide and the problem persists, or if the problem you are experiencing is not listed here, please call LGE Customer Service at 1-800-243-0000(US), 1-888-542-2623(Canada).

TROUBLESHOOTING

BEFORE CALLING FOR SERVICE

Problem Possible Causes Solutions

Improper cycle selection.

Water temperature too low.

Dish washing detergent was not used. Use recommended detergent.

Food soil remains on dishes.

Noise

Cloudiness on glassware.

Black or gray marks on dishes.

Yellow or brown lm on inside of surfaces of dishwasher.

Dishes don’t dry. Rinse agent dispenser empty.

Lamps do not illuminate. Power is not connected. Connect power supply.

Sprays arms do not rotate smoothly.

Upper rack is crooked. Rack is poorly adjusted.

Dishwasher continuously beeps when the door is opened, during or right after a cycle has completed.

IE Error Water inlet problem.

OE Error

FE Error Excessive Water supplied.

E1 or AE Error Water leakage problem.

HE Error Heater circuit failure.

TE Error

LE Error Motor Trouble

Low inlet water pressure.

Water jet holes on spray arms blocked. Clean the spray arms.

Improper loading of dishes

Filters are clogged. Clean lters.

Some level of noise is normal during operation.

The dishwasher is not level. Adjust leveling feet.

Nozzle arm knocking against dishes. Reposition the dishes.

Combination of excessive detergent and soft water.

Aluminum items rubbing dishes during cycle.

Coee or tea stains.

Holes of spray arms are blocked by food particles.

The contents of the dishwasher are hot and care should be used when placing your hands inside the dishwasher.

Drainage Problem.

Filters are clogged. Clean Filters

Thermistor failure or very high inlet water temperature (over 194F)

Select correct cycle based on soil level and type of dishware being washed.

Check water supply connection or water heater setting.

Water pressure should be between 20 and 120 psi.

Make sure dishes do not block spray arm rotation or interfere with detergent dispenser.

Detergent cover opening. Drain pump at the beginning of drain

cycle.

Use less detergent and use a rinse aid to minimize the problem.

Reposition the dishes.

Eliminate the stain by using a stain removal product.

Check and rell the rinse agent dispenser if empty.

Clean the holes of spray arms.

See the Height Adjustable Upper Rack section.

Close the door until the dishwasher and dishes have cooled down. The beeping will go away if the door is closed or the interior temperature has been cooled.

Check for a clogged, kinked or frozen water inlet hose.

Check water supply.

Check for a clogged, kinked or frozen drain hose.

Please call an Authorized Service Center or LGE Customer Service at 1-800-243-0000 (US) 1-888-542-2623 (Canada)

ENGLISH

SMART DIAGNOSIS™ SYSTEM

(LDF**** ) (LDS**** )

Smart Diagnosis cannot be activated unless your dishwasher is turned on by touching the POWER button. If your dishwasher is unable to turn on, then troubleshooting must be done without using Smart Diagnosis.

Smart Diagnosis Using Your Smart Phone

1. Download the LG Smart Laundry & DW application on your smart phone.

2. Open the LG Smart Laundry & DW application on your smart phone.

3. Press the Smart Diagnosis button on your smart phone.

4. Press the Diagnose button on your smart phone.

5. Press the Dishwasher button on your smart phone.

6. Press the RECORD button on the smart phone and then hold the mouth piece of the smart phone near the speaker located on the side panel of the dishwasher. Hold the phone no more than one inch (but not touching) the machine.

7. Press and hold the Rinse button on the dishwasher display

for three seconds.

NOTE

After three seconds, the display will change from 0:22 to 6 and then start counting down the remaining time.

8. With the phone held in place, press the Smart Diagnosis button on the phone.

NOTE

Do not touch any other buttons or icons on the display screen.

9. Keep the phone in place until the tone transmission has nished. This takes about 6 seconds and the display will count down the time.

10. When the recording is complete, view the diagnosis by press-

ing the Next button on the phone.

Smart Diagnosis Through the Call Center

1. Call the LG call center at: (LG U.S.) 1-800-243-0000 (LG Canada) 1-888-542-2623.

2. When instructed to do so by the call center agent, hold the mouthpiece of your phone near the hole located on the side panel. Hold the phone no more than one inch (but not touching) the machine.

NOTE

Do not touch any other buttons or icons on the display

screen.

3. Press and hold the Rinse button on the display screen for three seconds.

4. Keep the phone in place until the tone transmission has nished. This takes about 6 seconds and the display will count down the time.

5. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be able to assist you in using the information transmitted for analysis.

NOTE

Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting

pends upon various factors, including, but not limited to, the reception of the cellular phone being used for transmission, any external noise that may be present during the transmission, and the acoustics of the room where the machine is lo-

nosis would accurately troubleshoot any given issue.

+ 70 hidden pages