I M P O RTA N T S A F E T Y I N S T RU C T I O N S
READ ALL INSTRUCTIONS BEFORE USE
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and
obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION”.
These words mean:
WARNING This symbol indicates the possibility of death or serious injury.
CAUTIONThis symbol indicates the possibility of injury or damage to property.
BASIC SAFETY PRECAUTIONS
WARNING To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic precautions, including the following:
English
• Do not attempt to repair or replace any part
of your dehumidifier unless it is specifically
recommended in this manual. All other services
should be referred to a qualified technician.
• If the power cord becomes worn or damaged,
the cord must be replaced by a qualified service
technician using genuine replacement parts.
• The dehumidifier should be plugged into its own
grounded 15A, 60 Hz, 120 VAC circuit.
• Do not plug other appliances into the same
outlet; it can overload the circuit and cause a fire
or electric shock.
• Do not remove the round grounding prong from
the plug. It can result in the risk of electric shock.
• This dehumidifier is not designed for use by
young children. Young children should be
supervised to ensure that they do not play with
or climb on the dehumidifier.
• Be sure all packaging materials are removed
from the dehumidifier before use. It can result in
personal injury.
• Do not disassemble or modify the dehumidifier
or the power cord. It can result in the risk of
electric shock or fire.
• Do not place the power cord or dehumidifier
near a heater, radiator, or other heat source. It
can result in the risk of electric shock or fire.
• Do not use this or any appliance near flammable
gases or liquids or other combustibles, such as
gasoline, benzene, thinner, etc. It can result in
the risk of electric shock or fire.
• Make sure the power cord is plugged firmly and
completely into the outlet. It can result in the risk
of electric shock or fire.
• Do not start or stop operation by plugging in or
unplugging the power cord. It can result in the
risk of electric shock.
• If the dehumidifier is making unusual sounds or
is emitting smoke or an unusual odor, unplug it
immediately. It can result in the risk of electric
shock or fire.
• Do not use if the electrical socket is loose or
damaged. It can result in the risk of electric
shock or fire.
• Do not operate with wet hands or in a damp
environment. It can result in the risk of electric
shock.
• Do not use this or any electrical appliance if you
smell gas. It can result in the risk of fire or
explosion.
• Turn off and unplug the dehumidifier before
cleaning to avoid the risk of electric shock.
• Do not clean the unit with water. Water can enter
the unit and damage the insulation, creating a
shock hazard. If water enters the unit, unplug it
immediately and contact Customer Service. It
can result in the risk of electric shock.
• Use two or more people to lift and install the
unit. Failure to do so can cause back injury or
other injuries.
3
I M P O RTA N T S A F E T Y I N S T RU C T I O N S
READ ALL INSTRUCTIONS BEFORE USE
BASIC SAFETY PRECAUTIONS
CAUTION To reduce the risk of fire, electric shock, or injury to persons when
using this appliance, follow basic precautions, including the following:
• To avoid possible cuts, avoid contacting the
metal parts of the dehumidifier when removing or
reinstalling the filter. It can result in the risk of
personal injury.
• Do not block the air inlet or outlet of the
dehumidifier. Reduced air flow will result in poor
performance and could damage the unit.
• Always grasp the plug when plugging in or
unplugging the dehumidifier. Never unplug by
pulling on the cord. It can result in the risk of
electrical shock and damage.
• Always turn off and unplug the dehumidifier
when it will not be used for extended period of
time. This conserves energy and reduces the
chance of accidents.
• Secure the wheels with blocks to prevent the
dehumidifier from rolling on smooth floors.
• Install the dehumidifier on a sturdy, level floor
capable of supporting up to 55 lbs (25 kg).
Installation on a weak or unlevel floor can result
in the risk of property damage and personal
injury.
• Make sure the dehumidifier is the correct size for
the area you wish to dehumidify. Using an
dehumidifier that is the wrong size can waste
energy and damage the dehumidifier.
• Close all doors and windows to the room for
most efficient operation.
• To prevent damage to the surface finish, use only
a soft cloth to clean the dehumidifier. Do not use
wax, thinner, or a strong detergent.
• To prevent spills and property damage, be sure
to empty the bucket of the dehumidifier properly.
• Do not position the dehumidifier so that
pets or house plants are exposed to the
direct air flow. It can result in the risk of injury
to pets or house plants.
• To prevent the coils from freezing, do not
operate the dehumidifier if the room temperature
is below 42°F(6°C)
• Do not drink the water from the drain pan.
Dispose of it properly outdoors or down
the drain.
• Do not operate dehumidifier without the filter
securely in place. Operation without the filter
could damage the unit.
• Clean the filter every two weeks, or more often
if needed.
• This dehumidifier is intended for household use
as a consumer comfort appliance. Do not use it
as a precision climate control system, for food,
pets, plants, artwork, etc. Such items could be
damaged.
4
I M P O RTA N T S A F E T Y I N S T RU C T I O N S
READ ALL INSTRUCTIONS BEFORE USE
ELECTRICAL SAFETY
• This dehumidifier must be plugged
WARNING
Electrical Shock Hazard
Failure to follow these instructions can result
in death, fire, or electrical shock.
• This unit must be properly grounded.
• Do not, under any circumstances, cut or
remove the ground prong.
• If you do not have a properly grounded
outlet, or if there is any doubt that the outlet
is not properly grounded, a qualified
electrician should check the outlet and
circuit, and, if necessary, install a properly
grounded outlet.
into a grounded 60 Hz, 120 VAC outlet
protected by a 15A time delay fuse
or circuit breaker.
• This dehumidifier must be installed in
accordance with national wiring codes.
• Do not alter or modify the plug or cord
of this dehumidifier. If the power cord
becomes worn or damaged, the cord should
only be replaced by a qualified service
technician using genuine replacement parts.
• Do not use an extension cord.
English
5
I M P O RTA N T S A F E T Y I N S T RU C T I O N S
Ensure proper
ground exists
before use
Adapter Plug
READ ALL INSTRUCTIONS BEFORE USE
ELECTRICAL SAFETY
PREFERRED
GROUNDING
METHOD
Due to potential safety hazards, the use of
an adapter plug is strongly discouraged.
For temporary connections, use only a
UL-listed adapter. Ensure that the large slot
in the adapter is aligned with the large slot
in the outlet.
To prevent damage to the adapter’s ground
terminal, hold the adapter in place while
plugging in or unplugging the air conditioner.
TEMPORARY GROUNDING
METHOD
(Use of adapter
plugs not
permitted
in Canada)
• Frequent connection and disconnection
can damage the ground terminal on the
adapter. Never use a broken or damaged
adapter.
• Attaching the adapter ground terminal to
the wall receptacle cover screw does not
ground the appliance unless the cover
screw is metal and not insulated, and the
wall receptacle is grounded through the
house wiring.
SAVE THESE INSTRUCTIONS
6
PA RT SA N DF E AT U R E S
h
KEY PARTS AND COMPONENTS
1
2
3
6
4
5
MOTORIZED AIR DISCHARGE
1
(AUTO SWING)
The adjustable louvered air discharge opens
automatically when the dehumidifier is turned
on, and closes when it is turned off. It can also
be set to oscillate to distribute the air.
2
CONTROL PANEL AND DISPLAY
Large LED display shows the set humidity and
indicator lights show the operating mode.
Simple push buttons make changing settings
quick and easy.
3
BUCKET COVER
Bucket cover prevents overflow of water
from the bucket.
7
8
9
4
BUCKET HANDLE
FLOAT
5
Float checks bucket water level.
6
HANDLE
The handle provides a convenient grip for
moving the dehumidifier.
7
HUMIDITY SENSOR
8
SWIVELING CASTERS
Swiveling casters allow you to move the
dehumidifier easily on most floor surfaces.
BUCKET
9
Bucket holds the condensate water.
English
7
PA RT SA N DF E AT U R E S
KEY PARTS AND COMPONENTS
11
10
15
10
FILTER COVER
11
HOSE & HOSE COVER
When setting Spot Dry mode, pull the hose
and open the hose cover.
12
13
14
15
POWER SUPPLY CORD HOLDER
16
EXTENSION HOSE
Extension Hose can be connected to Hose
(No. 11). Refer to page 14.
16
17
12
AIR FILTER
Air filter prevents to entry of impurities.
13
DEODORIZING FILTER
Helps remove room odors and clean the air.
Change filter every 1~2 years (as needed).
14
POWER SUPPLY CORD
8
CONNECTOR HOSE
17
Connector Hose is used for continuous drain
operation. Refer to page 19.
CONTROL PANEL
PA RT SA N DF E AT U R E S
For detailed instructions on each
function, see the following pages.
SPOT DRY
1
Refer to page 14.
CONTINUOUS DRY
2
Under continuous operation, dehumidifying occurs
irrespective of humidity of the room.
3
MODE
Each time that the Mode button is pressed, the
mode is shifted:
Automatic Dehumidification → Quiet Operation →
Condensation Moisture Prevention → Air Deodorizing.
In the sequence above, lamp lights up.
4
AUTO SWING
Sets the motorized air discharge to oscillate,
improving air circulation in the room.
5
HUMIDITY CONTROL
Each time that the humidity control button is pressed
the humidity setting is adjusted.
→→→→
6
TIMER
Set the time that dehumidifier will automatically turn
off.
POWER
7
Turn the dehumidifier on and off.
Bucket
NOTE:
Tips when draining water
When removing the bucket, use both hands to
prevent potential water spills.
English
9
PA RT SA N DF E AT U R E S
CONTROL PANEL
1
FULL BUCKET INDICATOR
When bucket is full, red light will turn on.
2
DEFROST
AIRFLOW
3
AUTO SWING
4
Indicates motorized air discharge louver swings.
TIMER DISPLAY
5
6
SPOT DRY
Air Discharge will be closed, open the Hose Cover.
CONTINUOUS DRY
7
Dehumidifier operates continuously irrespective of
humidity level.
INDICATOR
INDICATOR
INDICATOR
→.........→→→None
INDICATOR
INDICATOR
8
AUTOMATIC DEHUMIDIFICATION
QUIET OPERATION
9
Operates at Low Fan speed.
CONDENSATION MOISTURE PREVENTION
10
INDICATOR
INDICATOR
INDICATOR
Condensation Moisture Prevention mode operates
when room temperature decreases.
11
AIR DEODORIZING
Helps remove room odors and clean the air.
12
HUMIDITY LEVEL INDICATOR
Displays the present humidity and desired one.
→→→→
: Current Humidity Level
: Desired Humidity Level
When current humidity level is more than 70%,
humidity indicating lamp is
When current humidity level is lower than 30%,
humidity indicating lamp is
INDICATOR
HHi
i
.
LLo
o
.
10
H O W TO U S E
BEFORE USING YOUR DEHUMIDIFIER
PREPARING FOR OPERATION UNPACKING THE DEHUMIDIFIER
Refer to the Instructions included in this manual
before using the dehumidifier. Once the
dehumidifier has been properly assembled and
installed:
Plug the power cord into its own dedicated
1
properly grounded outlet. You will hear a
tone to confirm that the dehumidifier is
plugged in. Do not plug other appliances
into the same outlet; it could overload the
outlet and create a fire hazard.
Make sure the dehumidifier and cord is
2
positioned where it does not create a
tripping hazard and will receive adequate
ventilation. Do not place it directly next to
furniture or objects that could block the
vent openings.
3
Make sure that any items that could be
blown over or damaged by the airflow from
the fan are out of the airflow path.
IMPORTANT:
• Do not remain in the direct contact with airflow
from the dehumidifier for extended periods of
time.
• To prevent damage or injury to pets and plants,
make sure they are not exposed to direct
airflow from the dehumidifier.
• When used at the same time as stoves,
fireplaces, and other combustion devices,
make sure there is a sufficient flow of fresh air
into the room. Do not use in tightly enclosed
spaces with these types of devices.
• This dehumidifier is intended for household use
as a consumer comfort appliance. Do not use
it as a precision climate control system, for
food, pets, plants, artwork, etc. Such items
could be damaged.
Remove and store packing materials for reuse.
Remove any shipping tape before using the
dehumidifier. If the tape leaves behind any
adhesive, rub a small amount of liquid dish soap
onto it and wipe with a damp cloth. Do not use
sharp instruments, alcohol, thinners, or abrasive
cleaners to remove adhesive.
They could damage the finish.
English
11
H O W TO U S E
43~90°F
(6~32°C)
Over 12″
Over 12″
Over 12
″
43~90°F
(6~32°C)
BEFORE USING YOUR DEHUMIDIFIER
BEFORE OPERATING
1
Operate at room temperature between
43~90°F(6~32°C).
Wait 3 minutes when operating
2
dehumidification.
Immediately after stopping operation or
plugging the Power Cord, dehumidifying
operation will not occur for about 3 minutes
to protect compressor. When the
dehumidifier starts operating, the noise level
increases.
6
Connect the Power Cord to
the wall outlet.
Press the POWER button.
7
Air Discharge will open.
Automatic Dehumidification will operate.
Humidity Indicator lamp indicates the
present humidity.
Under Automatic Dehumidification Mode,
dehumidifying stops when humidity drops
below set humidity.
While the dehumidifier is operating, room
3
temperature is raised by 4~5°F(2-3°C).
A Dehumidifier does not cool air. Rather, it
generates heat while operating. Hence,
room temperature may increase by 4~5°F(23°C).
Remove the plug from the wall outlet
4
when the unit is not in use for a
prolonged period of time.
5
Allow at least 12 inches of space on all
sides of the unit for good air circulation.
If there is not proper ventilation, airflow will
suffer and may prevent efficient operation.
To stop operation, press POWER button
8
once more.
Air Discharge gets closed.
All lights will shut off.
12
USING THE CONTROL
H O W TO U S E
POWER
Press the POWER button to turn the
dehumidifier ON or OFF. When you turn the
dehumidifier on, an ascending
tone will play and the display
will show the set humidity and
any special mode setting
indicators. The air discharge
on the top of the dehumidifier
will automatically open.
When turning the dehumidifier off, you will hear a
descending tone and the air discharge on the top
of the dehumidifier will close.
Any control settings such as Mode, Set
humidity, will be retained in memory when the
power is off.
NOTE: When turned on after being unplugged,
the dehumidifier will automatically reset to
Automatic Dehumidification mode, with a
humidity setting of 60%. Any other settings will
need to be re-entered.
MODE
Press the MODE button to select the operating
mode (Automatic Dehumidification, Quiet
Operation, Condensation
Moisture Prevention, Air
Deodorizing) for the
dehumidifier. The indicator
lamp will light as under table.
The default setting is
Automatic Dehumidification.
Press the MODE button to change to Quiet
Operation, press again to change to
Condensation Moisture Prevention, press again
to change to Air Deodorizing, and again to return
to Automatic Dehumidification.
PRESS THE MODE BUTTON
ModeFeatures
• Maintain humidity level by controlling the
dehumidification and air flow.
Automatic
Dehumidification
• For about 2 minutes after the Dehumidifier
starts operation, dehumidification starts
irrespective of the humidity level in the room.
• If humidity in the room gets below set
humidity, dehumidifying operation stops, but
fan will operate. (When humidity increases,
the unit starts operation.)
English
Quiet Operation
Condensation
Moisture
Prevention
Air Deodorizing
• Automatic operation of Low Fan speed to
operate quietly.
• To prevent dew, when temperature in the
room is low.
• Automatic operation of High Fan speed.
• Desired humidity is automatically set to 40%.
• When cigarette smoking, pollen, or bad odor
contaminated in the air.
• Air Filter works to clean the air.
• In this mode, dehumidification will not
operate.
13
H O W TO U S E
Extension
Hose
Hose
Manguerade extensión
Manguera
ExtensionHose
Hose
Manguera deextensión
Manguera
USING THE CONTROLS
SPOT DRY
12
Pull out the hose.
Open the Hose Cover.
EEnngglliisshh
Move the hose in the direction where drying
3
is desired.
For added length, use extension hose.
Press the Spot Dry button, lamp will light.
4
Dried dehumidified air is blown out of the
hose.
WARNING
• Do not move the Dehumidifier by pulling
the extension hose.
This may cause the Dehumidifier to fall over,
resulting in injury.
NOTE:
“In order to protect the dehumidifier, the unit will shut off in SPOT DRY mode where voltage is
unstable”.
14
USING THE CONTROLS
H O W TO U S E
CONTINUOUS DRY
Dehumidifier will run non-stop irrespective of
room humidity level.
Press Continuous Dry button, Continuous
1
Dry Lamp comes on.
To stop the operation, press the Continuous
2
Dry button once again.
AUTO SWING
By rotating Air Discharge, air flow direction can
be changed. Depending on the airflow
direction, the sound level is varied.
Press the AUTO Swing button.
1
2
Air Discharge may stop temporarily due to
location adjustment, but will start to move in
a moment.
••
When hands or objects touch Air Discharge,
consequently changing rotating angle, restart
AUTO Swing operation.
••
If you stop operation in AUTO Swing mode,
next time the unit is started, AUTO Swing
mode will be selected.
English
To stop AUTO Swing operation, press the
3
AUTO Swing button once again.
••
When you want to stop the Air Discharge with
desired angle, press the Swing button when
Air Discharge reaches the desired position.
CAUTION
••
Do not insert fingers or stick other materials into Air Inlet or Air Discharge.
Don't touch the Air Discharge.
Fast-rotating fan may cause injury or malfunction.
15
Loading...
+ 34 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.