LG LD-2293THB Owner’s Manual [ar]

DISHWASHER

OWNER'S MANUAL

MODEL : LD-2293THB

Please read this manual carefully before operating your dishwasher. Retain it for future reference.

P/No.: MFL30149767

C ONTENTS

SAFETY AND CAUTION	3
INSTALLATION INSTRUCTIONS	5
PARTS NAME	9
FUNCTION OF CONTROL BUTTON	10
BEFORE USING FOR THE FIRST TIME	12
HOW TO USE AND OPERATE	14
OPERATING SEQUENCE	19
PROGRAM	20
USER MAINTENANCE INSTRUCTIONS	21
TROUBLE SHOOTING GUIDE	22
SPECIFICATION

S AFETY AND CAUTION

IMPORTANT SAFETY INSTRUCTIONS

WARNING - When using your dishwasher, follow basic precautions, including the following:

•Please read this manual carefully before using the dishwasher for the first time.

•This manual contains very important notes regarding the installation, use and maintenance of your dishwasher.

•The manufacturer can not be responsible for problems caused by ignoring these safety and caution instructions.

•This dishwasher is designed for normal household use.

•Do not use the dishwasher for industrial and commercial use, or other purpose.

•The appliance is not intended for use by young children or infirm persons without supervision.

•Check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged, do not put it into use but contact your supplier without delay.

During installation

•Electrical connection must be in accordance with the rating label.

•Electrical safety is only guaranteed when the earth system of your house is in accordance with the related local regulations.(Do not use an extension cable or cord.)

•If the hot water exceeds 65ºC, adjust the water heater setting. If the hot water temperature can not be maintained below 65ºC, the dishwasher must be connected to cold water.

•If power supply cord is damaged, it must only be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.

•This appliance must be positioned so that the plug is accessible.

•The appliance is to be connected to the water mains using new hose-sets and that old hosesets should not be reused.

During use

•Only suitable household utensils should be placed in the dishwasher.

(Please avoid utensils; that are nonheatresistant, metal decorated, etc.)

•Do not use any kinds of solvent in your dishwasher. They may cause an explosion or fire.

•Do not spray water on the appliance.

It may cause the failure of electric parts or electric shock.

•Do not push down or sit on the inner door when the door opened. It may cause the deformation or failure of your dishwasher.

•Do not use the detergent for hand washing. The detergent for dishwasher should be used for normal operation.

•This appliance is fitted with a safety function that automatically stops the operation of the dishwasher when it is exposed to heavy disturbance on its mains.

•Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.

Check that the detergent receptacle is empty after completion of the wash cycle.

Child Safety

•Controls may be locked using “Child Lock” mode to prevent from all the setting from being changed by a child.

•Keep children away from detergents and rinseaids.

•Do not allow children to operate the dishwasher.

•Young children should be supervised to ensure that they do not play with the appliance.

3

S AFETY AND CAUTION

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

CAUTION The instructions shall state the substance of the following :

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet have a proper outlet installed by a qualified electrician.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

4

I NSTALLATION INSTRUCTIONS

WARNING

A qualified electrician/plumber or competent person should carry out any electrical/plumbing work required to install this appliance.

Step 1 :

PREPARE CUPBOARD OPENING

1This dishwasher is designed to fit the size shown as below.

2Select a location as close to sink as possible for ease of connection to the water and drain pipes.

3To ensure good drainage, the dishwasher should not be installed more than 3 meters away from the sink.

4If dishwasher is installed in a corner, a minimum of 5cm of space is required between the washer and an adjacent cabinet or wall.

Unit:mm

Any bare wood surrounding the dishwasher should be sealed with a waterproof paint or sealant to prevent swelling.

Step 2 :

PREPARATION FOR ELECTICAL WIRING

CAUTION

For personal safety, remove house fuse or open circuit breaker before installation. Do not use an extension cord or adapter plug with this appliance. Electrical and earthing connections must comply with the national electrical code/provincial and municipal code and/or other local codes.

1This appliance must be supplied with correct rating voltage and hertz as shown on instruction manual, and connected to an individual, properly earthed branch circuit, protected by a minimum 15 amp circuit breaker or time delay fuse. Wiring must be 2 wire with Earth.

2The power plug must be in a accessible location adjacent to and not behind the dishwasher and within 1.2 meters of the dishwasher side.(See page 7 Fig.A)

3The power plug must be correctly earthed, if in doubt, have it checked by a qualified Electrician. No other appliance should be connected to the same plug outlet by a double adapter or similar plug.

Dangerous voltage

To indicate hazards arising from dangerous voltages.

Note – In case of application in a warning sign the rules according to ISO 3864 shall be adhered to.

5

I NSTALLATION INSTRUCTIONS

Step 3 :

PREPARING THE DISHWASHER FOR INSTALLATION

1Lay the dishwasher on its back.

2Adjust the legs to the required height as shown in below figure.

3Snap the left(right) rail onto the left(right) feet of the base. The adjustment screw should be facing toward the front.

Leveling kit is consist of two rails. The rail A is left rail and the rail B is right rail. Turn the front adjustment screw to level the dishwasher.(step8)

LEFT RAIL - A

RIGHT RAIL - B

4 Set the dishwasher upright.

Step 4 :

INSTALLING THE DISHWASHER IN CUPBOARD

1Before sliding the dishwasher into the cupboard opening, all necessary height and balancing adjustments should be made using a spanner.

2Slide the dishwasher into the cabinet opening carefully. Make sure that the drain hose inside the cabinet is not kinked or stretched.

CAUTION

Adjusting the fully seated rear feet in the wrong direction, especially with a power screwdriver, can damage the adjusting mechanism.

Note

Do not use the leveling kit if the counter height dimensions are too low. In this case, the rear feet must be adjusted before installing the dishwasher into the cabinet.

6

I NSTALLATION INSTRUCTIONS

Step 5 :

DRAIN LINE CONNECTION

1If the end of drain hose does not fit to the drain line, use a rubber connector(not supplied) that is resistant to heat and detergent.

2This should be available from a plumbing shop or DIY merchants.

3There are two typical connections as shown in Figure A, B.

The “S” trap spigot must be drilled out cleanly and free of obstruction to its maximum internal diameter, if used for drainage.

To prevent siphoning, one of the following methods must be used:

When the drain hose is connected to a sink “s” trap or waste disposal unit, the hose must be looped up to the underside of the bench top and secured.

When the drain hose is connected to a separate standpipe, it is essential that an airtight connection be made.

Refer to Fig.B

Fig. B : Drainage connection - stand pipe.

Drain hose Extension

Extend drain hose as shown below.

CAUTION

Fig. A

When you connect or extend drain hose,

make sure that drain hose is not kinked.

(Bends should have a 40 mm radius.)

7

I NSTALLATION INSTRUCTIONS

Step 6 :

WATER SUPPLY CONNECTION

1Connect the water supply hose to the water tap as shown.(Some models consist of an inlet valve and hose.) This dishwasher may be fed with either

hot or cold water. If the water can not be maintained below 65ºC, the dishwasher must be connected to cold water.

2When connecting, the sealant tape or sealing compound to avoid water leaks.

Make sure that the line is not kinked or sharply bent.

Water tap

supply

Step 7 :

FINAL CHECK AND ASSEMBLING

1Securely hand tighten supply hose to the water supply.

Plug the power supply cord into an earthed electrical point and switch on.

2After installing and prior to using the dishwasher with crockery, we recommend that you use the dishwasher on ‘Quick’ mode to rinse through. At this stage it is useful to ensure that there are no operating problems or water leaks.

When the dishwasher is used for the first, there may be a loud noise, if this happens, turn off the power and restart the dishwasher.

Step 8 :

HOW TO LEVEL THE DISHWASHER

After installing the dishwasher, you may notice a slight sticking of the door to the dishwasher, when you open or close the door. If this does happen you need to adjust the level of the dishwasher.

Case 1. In case the door is slanted to the right

Fig. C

•If the door slants to the right, see Fig.C and follow these instructions:

1)Turn the right adjustment screw to the counter clockwise to raise right rear corner of dishwasher.

2)Check the opening of door and repeat if necessary until the door opens and closes properly.

•When the product is correctly leveled, There should be no slant , stickiness or friction sound.

Case 2. In case the door is slanted to the left

Fig. D

•If the door slants to the left, see Fig.D and follow these instructions:

1)Turn the left adjustment screw to the counter clockwise to raise left rear corner of dishwasher.

2)Check the opening of door and repeat if necessary until the door opens and closes properly.

•When the product is correctly leveled, There should be no slant , stickiness or friction sound.

8

P ARTS NAME

1.	Control Panel					10.					Detergent And Rinse Aid Dispenser
2.	Front Cover					11.					Vapor Vent Cover
3.	Power Button					12.					Upper Spray Arm
4.	Drain Hose									13. Lower Spray Arm
5.	Inlet Hose					14.					Filter ASM
6.	Power Cord					15.					Lower Rack
7.	Adjustable Leg					16.					Salt Container Cap
8.	Upper Rack					17.					UV Lamp (not visible)
9.	Cutlery Rack

Funnel

The appearance and specifications may vary without notice.

9

F UNCTION OF CONTROL BUTTON

Program

Program

• When you want to select program, press this button.

Spray

• With each press, the level of water jet is changed to Strong, Medium and Soft in a sequence.

Indicator

• Child Lock.

• Refill with rinse aid.

• Refill with special salt.

Time Left

•Before starting, the display window shows the running time of the selected program.

•After starting, the display window shows the remaining time.

•If the dishwasher has a trouble, the trouble type is displayed. “OE”, “FE”, “IE”, “EI”, “HE”, “CE”, “LE”, “tE”

•If this error letters are displayed, please refer to the trouble shooting guide page 22 and follow the guide.

Delay Start

•If you want to delay the start of selected program, press this button.

•Pressing this button will increase time by 1 hour.

•The delay start time can be adjusted from 1 hour to 19 hours.

10

Spray

Indicator

Time Left

Delay Start

Power

Sanitization

Child Lock

Half Load

Beep On/Off

Power

•For operating, press this button first for power on.

•After operating, this button automatically switches off for safety and energy saving.

•In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.

Beep On/Off

•The dishwasher must be switched on.

•The beep on/off function can be set by pressing the Half Load and Power button simultaneously for a few seconds. Then, a “On” will appear in the display.

•The beep on/off function is automatically canceled when power failure occur.

Half Load

•In case of small load, use upper or lower rack only to save energy.

•With each press, can select Upper or Lower rack only.

•In case you don’t select this button, the machine always works vario washing, which operate upper and lower spray arm alternately.

Child Lock

•Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.

•This function is automatically canceled when power failure occur.

•For locking/ unlocking, press Spray and Sani. button for a few seconds simultaneously.

Sanitization

•Repeated pressing of the Sani. button will select UV, Extra Hot, UV & Extra Hot.

•If you select the UV function, sterilizer will be performed by UV lamp after drying cycle.

•If you select the Extra Hot function, the operating temperature will be up to 80.

11

B EFORE USING FOR THE FIRST TIME

TOTAL HARDNESS TEST

Step 1. Check and find water hardness level

Method 1

1)Check the water hardness of your area.

(Your water utility company can help you with this.)

2)Set the softening system level of your dishwasher according to the water hardness level.

Refer to the Step 2.

Method 2

< Water hardness level >

L : Softening system level)

1)Check your water hardness by using test strip. ( )

2)Test Procedure

Immerse all reaction zones of the test strip for approx.1sec (not in running water!).

Shake off excess liquid from the strip and wait for 1min.

Then, the green color of the reaction zone will change to the red-violet. Count the number of red-violet from the strip.

<Water hardness level >

			Hardness range				Water	Softening
	number of				mmol/l	mg/l		system
		°d	°e	°f			quality
	the areas
					(Ca+Mg)	Ca		level	1 °e = 14.25 mg/l CaCO3
	(red-violet)
		<7	<9	<12,5	<1,3	<50	soft	H0, H1	1 °f = 10 mg/l CaCO3
									1 °d = 10 mg/l CaO (=1,78 °f) (=1,25 °e)
		7 - 14	9 - 17,5	12,5 - 25	1,3 - 2,5	50 - 100	moderately hard	H2, H3
		14 - 21	17,5 - 26	25 - 37	2,5 - 3,8	100 - 150	hard	H4, H5
		>21	>26	>37	>3,8	>150	very hard	H6, H7

3)Set the softening system level of your dishwasher according to the water hardness level. Refer to the Step 2.

Step 2. Setting up the softening system level of your dishwasher

Adjust the water softener to the setting to the corresponding hardness of the water in your area. The water softener has 8 adjustment levels.

The dishwasher is programmed at the factory for a water hardness level of “”. This can be checked and altered by using the buttons on the control panel.

1.First, ensure the dishwasher is switched off.

2.Press Half Load and Power button simultaneously and keep them pressed.

3.To change the setting:

Simply press the Half Load button, then the figure will change one by one. The display will change between “” and “”.

4.Once the hardness setting is correctly adjusted, press the Sani. Button. The hardness setting is then saved.

12

B EFORE USING FOR THE FIRST TIME

Step 3. Salt Filling

This model has a water softener to soften hard water.

Please read these notes carefully for correct operation.

In order to provide satisfactory rinsing results, the dishwasher requires soft water, i.e., containing little or no lime, otherwise water stains will be left behind on the dishes and interior containers. If the tap water exceeds a certain level of hardness, it must be softened, I.e.,decalcified.

This id achieved by adding a special salt to the water softener inside the dishwasher. The required amount of salt is set up according to how hard your tap water is.

Filling with Salt

• Remove lower rack and unscrew the cap of salt container.

• Before using your dishwasher for the first time, fill with salt. The container has a capacity of 1.9kg salt.

Use a funnel for ease and clean filling, ensuring that coarse salt or regenerating salt intended for dishwashers is used.

• After filling, wipe off any spilled salt to seal the cap properly.

• Screw the cap tightly to prevent any suds from penetrating into the container.

Step 4. Adding Rinse Aid

For filling

To fill the Rinse Aid chamber, rotate the round cap counter clockwise and remove. Fill the container to the maximum level with a good quality Rinse Aid, then replace and lock the cap.

The Rinse Aid is automatically dispensed during the final rinse cycle.

The dosage is factory set to suit most installations. If, after washing, you notice cloudy spots, streaks or water marks on your glassware, it may be necessary to increase the setting. To do this, remove the cap and rotate the indicator arrow to a higher setting then replace the cap . If the glasses are smeared or foam is present on the bottom of the glass or the bottom of the machine, select a lower setting.

13

H OW TO USE AND OPERATE

1. Loading your Dishwasher

For better washing performance, always load the dishwasher according to the instructions. Before loading items into the dishwasher clean off large particles of food, in particular insoluble items such as bones, pips, etc.

When loading the dishwasher, please act accordingly:

Position crockery such that water will contact all surfaces.

Deep based items should be placed at an angle to help water run off and dry properly.

Items with burnt on food should be soaked prior to loading in the dishwasher.

2. Loading the Lower Rack

The lower basket is best loaded with dinner plates, soup bowls, dishes, pots, pans, lids and even the grill tray.

Plates should be positioned upright and facing the centre of the rack and pots, pans and large dishes must be turned upside down.

How to use

Fold-down dividers at the lower and the upper rack can be lowered to improve stacking of pots and pans.

Loading examples (Energy test)

	Dinner plates			Soup plates

Oval platter Soup plates

Dessert plates

Take care not to obstruct the rotation of the spray arms and ensure that large items do not prevent the detergent dispenser lid from opening.

3. Using the Cutlery Basket

Cutlery should be mixed within each section of the cutlery basket to prevent nesting of similar items. Place the cutlery in the cover with the handles down. The cover can be hinged and clipped away from the basket if you choose not to use them.

Place knives in the separate rack for located in the top of the dishwasher.

Take care when loading and unloading sharp items.

How to use

Slide two baskets in opposite directions, then pull them apart.

14

H OW TO USE AND OPERATE

Loading examples (Energy test)

											3	4								7		3
											3		1			4					1	3
											3	1								1
												1								1		3
												1								1		6
											4	1								1		4
											4	1								1		4
											4	2								2		4
											4	2								2		4
											4	2								2		4
											3	2								2		3
													2							2
																						3
											3		2							2
1		2	3	4	5	6	7												5
												3								3
																						5

WARNING

Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

How to use

Fold-down dividers at the upper rack can be lowered to improve stacking of dishes.

Loading examples (Energy test)

Bowl(L) Bowl(M)

Cups

Knives

Glasses

Bowl(S) Saucers

Front

4. Loading the Upper Rack

It is best to load this with more delicate items such as, small plates, long cutlery, cups, glasses and dishwasher safe plastic items. Plates should be positioned upwards with the plate bottom facing the front of the rack.

Cups, glasses and bowls must be positioned upside down.

Extra cups or cooking utensils can be laid on the fold down cup racks, which also provides support for long stem glasses.

Take care not to obstruct the rotation of the spray arm under the upper rack.

Non Dishwasher Safe Items

The combination of high water temperatures and dishwasher detergent may damage particular items, therefore we do not recommend using the dishwasher to wash the following:

■Copper or anodized aluminum

■Hand painted silver or gold leaf crockery

■Wood or bone handled utensils

■Iron or non rust proof utensils

■Plastic items that which are not dishwasher safe.

15