Page 1
MFL67082801,REV06,��.indd 1 11. 7. 12. �� 11:16
LED DOWNLIGHT
User Manual
• Please read the 「Safety Precautions」 prior to use for your safety.
• This manual is intended to prevent product damage and protect the user’s safety.
• Place the manual at a place where it can be easily located by all potential users.
Page 2
LED DOWNLIGHT
42%
or more
increase in energy eciency
Existing lamp LG DOWN 15W
42€
13€
22€
32€
22€
13€
76
%
42
%
Annual electricity cost
(Unit: EUR)
Annual maintenance cost
(Unit: EUR)
Annual cost reduction
Replacement Cost
Annual electricity Cost
Downlight LG Down 15W Downlight LG Down 15W
※
Based on 12 hrs operation per day, electricity cost €0.2/kwh and 0.54 times replacement.
※
Calculation result may dier by the lamp unit price, usage conditions and product lifetime.
×19
56
%
128.7
56.9
CO2 emission
(Unit: kgCO2)
Downlight LG DOWN 23W
※
Based on 12 hrs operation per day yearly. ※ Conversion Factor 0.573 kgCO2/Kwh, 3.86 kgCO2/trees)
Application of high-eciency LED technology allows for tremendous energy reduction
and its excellent heat management solution allows a life expectancy of 50,000 hours or
more, making it an environmentally friendly product.
Advantages
Excellent Alternative
Signicant energy savings over 42% through
replacement compared to conventional
26/52W downlight.
Energy Saving by High
Eciency
Up to 76% energy saving yearly compared to
conventional downlight lamp.
Eco-friendly
Eco-friendly light source, which contains no
mercury and low CO
2
emission.
MFL67082801,REV06,��.indd 2 11. 7. 12. �� 11:16
- 2 -
Page 3
OFF 25% 50%
56
%
70
%
Reduction in electricity consumption
Dimming control system
23W
52W
15W
※
Dimming control is optional. The results may dier by operating condition.
LED DownDownlight LED Down(Dimming)
Existing light LG DOWNLIGHT
Department store/Retail Store/ Studio/Theater/Stage/Park/Parking lot , etc.
Safety Precautions ·····································4~7
Product Conguration and Information, Size
Installation ················································· 9~10
Things to check before Requesting
Repair Service
MFL67082801,REV06,��.indd 3 11. 7. 12. �� 11:16
Low Heat Generation
Feeling comfortable and lowering cooling
costs compared with conventional
downlight.
Dimming Control
Up to 70% cost saving with its automatic
dimming control by light sensor detection.
Wide Application Coverage
Natural light with comfort for wide
application.
Table of Contents
·········· 8
·····················································11
- 3 -
Product Specications ································12
Dimming Cable Connection ·····················13
Limited Warranty ···········································14
Page 4
Safety Precautions
Less than 95%
humidity
Less than
10%
The meanings of the signs displayed on the product and user manual are as follows
•
This sign indicates operations that might be dangerous and needs care with caution.
For parts with this sign, user must read the manual carefully and follow instructions in
order to avoid risks.
•
This sign displays risks involving electric shock under certain conditions.
•
WARNING
CAUTION
WARNING
Violation of warnings may lead to serious injury or death.
•
Violation of precautions may lead to light injury or product damage.
MFL67082801,REV06,��.indd 4 11. 7. 12. �� 11:16
Product is heavy.
Use a trolley when
transporting the
product.
•
Dropping the product may cause
product damage and malfunction.
Do not install product
in places exposed to
dampness.
• Risk of re.
- 4 -
Use with proper
rated voltage.
• Risk of re and product
damage.
Install a circuit
breaker.
• Risk of re and electric shock.
Page 5
WARNING
MFL67082801,REV06,��.indd 5 11. 7. 12. �� 11:16
Do not store in a
humid area.
•
Risk of product malfunctioning.
Be careful not to
apply excessive force
to the power cable.
•
Otherwise, it may cause the
device to drop or result in
electric shock.
Do not randomly
connect the power
polarities.
• Risk of product damage and
accidents.
Do not install on unleveled ceilings.
• Risk of product falling, which
may lead to product damage
and injury to the user.
- 5 -
Perform grounding
work.
• Risk of electric shock.
Block power when
installing lighting
device.
• Risk of accidents such as
electric shock.
Use the device within
a temperature range
of 20°C to 50°C only.
• Using the device in high
temperatures may cause re
or shorten the LED's life span.
Do not expose the
product to water
when cleaning it.
• Risk of re and electric shock.
Page 6
WARNING
MFL67082801,REV06,��.indd 6 11. 7. 12. �� 11:16
Must x the product
properly on the ceiling.
• Risk of product dropping and
causing injury to the user.
Do not use if the
product has been
dropped or exposed
to shock.
•
Risk of product malfunctioning.
Do not stare directly
at the lamp when
turned on.
• Strong light may cause visual
impairment.
Do not use the product
if impurities are present
in the product or if the
product is submerged.
•
Risk of accidents such as electric
shock and product damage.
Never disassemble
the product.
•
Risk of accidents such as electric
shock and product damage.
If the lamp turns o by
itself, do not disassemble
the product. Contact the
service center for repair.
• It has risks of electric shock and
product malfunctioning.
Electric work must be performed by a certied technician
according to ‘electrical device technology standards or
extension regulations’ or ‘indoor electrical wire specications’
and the installation manual. Specic circuits must be used.
•Inadequate power capacity and faulty electric work may lead to re or electric shock.
- 6 -
Page 7
WARNING
MFL67082801,REV06,��.indd 7 11. 7. 12. �� 11:16
Do not cover the device
with clothes or paper,
or place it near
inammables.
• Otherwise, it may cause
malfunction of the device or re.
Do not use the device for purposes other than illumination.
(which include warming food, drying clothes, using under water, using as a search light,
shing or other events. )
• Otherwise, it may cause re or electric shock.
Keep some distance
between the lamp
and the object to be
illuminated.
• If the illumination distance is too
close or if the illumination is
on a material's surface, this may
cause discoloration or
deformation of the object or
cause re.
CAUTION
• Do not wipe the surface with inammables, such as alcohol, benzene,
and acetone.
• Do not use the device in places with corrosive gases.
• The color and the brightness of the lamp may dier even among the
same model because the LED light source has "light dispersion".
- 7 -
Page 8
Product Conguration and Information, Size
Product Conguration
※
Product Conguration may vary depending on the product.
Product Information
Category
Product
Verication
※
23W and 37W products are not suitable for covering with thermally insulating material.
※
Asterisk(*) will vary by model.
4 Inch 6 Inch 8 Inch
8W 15W 23W 37W
3000K LD08X730M2B.D00***0 LD15X730P2B.D00***0 LD25X730P2B.D00***0 LD40X730R2B.D00***0
4000K LD08X740M2B. D00***0 LD15X740P2B.D00***0 LD25X740P2B.D00***0 LD40X740R2B.D00***0
5000K LD08X750M2B.D00***0 LD15X750P2B.D00***0 LD25X750P2B.D00***0 LD40X750R2B.D00***0
5700K LD08X757M2B.D00***0 LD15X757P2B.D00***0 LD25X757P2B.D00***0 LD40X757R2B.D00***0
Product Size
“B”
“A”
Converter
Diffuser Plate
Main Body
Spring
Front Cover
“C”
- 8 -
Category
Ceiling Cut-out Ø 100±5 Ø 155±5 Ø 200±5
4 inch 6 inch 8 inch
“A” Ø 120 Ø 180 Ø 223
“B” 90 145 187
“C” 88 100 111
(Unit: mm)
MFL67082801,REV06,��.indd 8 11. 7. 12. �� 11:16
Page 9
Installation
WARNING
Make sure to turn o the main power switch o the installation space
before connection.
Connect so that the colors of the 3 power cables match.
(LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)
NEUTRAL
LIVE
Product’s power cables
Interior wiring of the building
P.E.
MFL67082801,REV06,��.indd 9 11. 7. 12. �� 11:16
Drill and prepare the ceiling so that it can
1
accommodate the product (refer to page 8 for
product size).
[Completed installation]
Connect the 3 product cables to the interior
wiring of the building. For nishing cap, use
2
standardized products.
Connect the 3 product cables to the interior
wiring of the building. For nishing cap, use
3
standardized products.
- 9 -
Page 10
Installation
MFL67082801,REV06,��.indd 10 11. 7. 12. �� 11:16
Insert the power cable in such a way that the
power cable does not get tangled between the
4
ceiling surface and the product.
Check to see if the product’s exterior surface is
installed on the ceiling so that there is no gap
6
between them.
- 10 -
Suciently lift the product so that the spring
can be inserted on the other side.
5
Turn the power switch on to verify that the
product is working properly.
7
Page 11
Things to check before Requesting Repair Service
Symptom Check
It won’t turn on. Check to see if the power is connected or if the
switch is o.
MFL67082801,REV06,��.indd 11 11. 7. 12. �� 11:16
It ickers. Turn the power o. Turn it back on after a moment.
(If the ickering problem still exists, make a service
request.)
A certain area is dark. Make a service request.
- 11 -
Page 12
Product Specications
MFL67082801,REV06,��.indd 12 11. 7. 12. �� 11:16
Category 4 Inch 6 Inch 8 Inch
Watts 8 15 23 37
Light Output
Lumens per Watt
Light Color
Color Accuracy (CRI)
Beam Angle 100
Product Weight
Input Voltage AC 100 - 240 ~
Input Frequency
Method of Power Input
Dimming Dimmable with 0-10V DC control
Power Factor (PF)
•
Performance may vary depending on the model.
•
Light Color of 3000K is limited to 6” products.
430 490 520 510 880 930 990 960 1430 1500 1580 1560 2270 2450 2580 2540
54 61 65 64 59 62 66 64 62 65 69 68 61 66 70 69
3000 4000 5000 5700 3000 4000 5000 5700 3000 4000 5000 5700 3000 4000 5000 5700
80
Size Ø 120 X 88(H) Ø 180 X 100(H) Ø 223 X 111(H)
358 680 720 1360
50 / 60
Single-phase three-wire system
(1)
(Source Current : 1mA, Max.)
Min. 0.90
(1) Some Dimmers may not be compatible.
- 12 -
Unit
W
Im
lm/W
˚
(degrees)
mm
Hz
K
g
V
Page 13
Dimming Cable Connection
To dim the lamps, a compatible dimmer should be used.
The use of incompatible dimmers will result in damage to the products. Please verify with vendors.
Ferrite Core
Dimming cable
MFL67082801,REV06,��.indd 13 11. 7. 12. �� 11:16
※
This dimming cable is for dimming control
(0~10V).
※
Please use a included dimming
cable in the box.
※
The components of a dimming cable
Housing(Yeonho SMH250)
Pin(Yeonho YST025-HS)
Ferrite Core(TDK ZCAT1730-0730)
※
The usage of ferrite core is limited to 6” products
- 13 -
※
Pay special attention to the polarities
for proper dimming control.
Page 14
Limited Warranty
The limited warranty set forth below is given by LG Electronics, Inc. (“LGE”) with respect
to the lighting product packaged with this limited warranty. (the “Product”). Your Product
,when delivered to you in new condition in its original packaging, is warranted against
defects in materials or workmanship as follows: for a period of three (3) years from the
date of original purchase, defective parts or a defective Product returned to LGE, or its
authorized service providers, as applicable, and proven to be defective upon inspection,
will be repaired, or exchanged for a new Product, as determine by LGE, or the authorized
service provider. This limited warranty is conditioned upon proper storage, installation,
use and maintenance compl ying wit h their resp ective published specifications, and
does not apply in the fo llowing cases: (a) Loss of or da mage t o the Produc t due to
abuse, mishandling, alteration, accident, electrical current fluctuations failure to follow
operating, maintenance or environmental instructions prescribed by LGE in writing or
services performed by someone oth er than LGE or an authorized se rvice provider. To
make a warranty claim, contact your local LGE sales representative. After contacting your
local LGE sales representative, you will receive instructions regarding if, when and where
to ship non-conforming Product. Failed Produc t must be returned for inspection and
verification of non-conformance by LGE. Failure to follow this procedure shall void this
warranty. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH
THIS PRODUCT IS MANUFACTURED. NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES
TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY
STATE D AB OVE, AND NO OT HER EXPR ESS WAR RANT Y OR GUA RANTY, EXCE PT A S
MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT
SHALL BIND LGE. (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.)
- 14 -
MFL67082801,REV06,��.indd 14 11. 7. 12. �� 11:16
Page 15
MFL67082801,REV06,��.indd 15 11. 7. 12. �� 11:16
Page 16
MFL67082801,REV06,��.indd 16 11. 7. 12. �� 11:16
P/No : MFL67082801 (REV06)
Loading...