LG LD1484T4 User Manual

OWNER'S MANUAL

OWNER’S MANUAL

DISHWASHER

Before beginning installation, read these instructions carefully.

WASHING MACHINE

This will simplify installation and ensure that the dishwasher is installed correctly and safely. Leave these instructions near the dishwasher

Please read this manual carefully before operating

after installation for future reference.

your set and retain it for future reference.

LD-1485T(W,L,M,B,C,S)4

WM0642H*

LD-1484T(W,L,M,B,C,S)4 LD-1483T(W,L,M,B,C,S)4

P/No. : MFL66281464

P/NO : MFL31245123

www.lg.com

CONTENTS

CONTENTS ................................

IMPORTANT SAFETY

INSTRUCTIONS

Important safety instructions .............. 3

Read all instructions before use ........4

Save these instructions ......................5

INSTALLATION INSTRUCTIONS

Prepare cupboard opening ................ 7

Preparation for electrical wiring ........7

Preparing the dishwasher for

installation .......................................... 8

Installing the dishwasher in

cupboard ............................................ 8

Installation of drain hose .................... 9

Installation of water inlet hose .........10

Final check and assembling ............10

How to level the dishwasher ............ 10

PARTS NAME ..........................

FUNCTION OF CONTROL

BUTTON ...................................

BEFORE USING FOR THE

FIRST TIME

Check and find water hardness

level .........................................18

Setting up the softening system

level of your dishwasher .................. 18

Salt Filling ........................................ 19

Adding Rinse Aid ............................. 19

INFORMATION FOR ENERGY

TEST ........................................

HOW TO USE AND OPERATE

Daily use load .................................. 21

Cutlery Rack .................................... 22

Cutlery Basket .................................23

Lower Rack ...................................... 23

Upper Rack ...................................... 24

Adding Detergent ............................. 26

Relling ............................................ 27

Drying ..............................................28

Thank you for buying an LG Dishwasher.

Please read your owner’s manual

carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference.

Record the model and serial number of your Dishwasher.

Model No.

Serial No.

Date of Purchase

OPERATING SEQUENCE ......

PROGRAMME .........................

USER MAINTENANCE

INSTRUCTIONS

Storing the dishwasher .................... 32

Filters ............................................... 32

Lower Spray Arm ............................. 32

Upper Spray Arm ............................. 32

Water Inlet........................................32

TROUBLE SHOOTING GUIDE

Before calling for service .................33

Using SMARTDIAGNOSIS™ ..........36

SPECIFICATION .....................

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

Your Safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.

These words mean:

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product,if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before use

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher, follow basic precautions, including the following:

• Please read this manual carefully before using the dishwasher for the first time.

• This manual contains very important notes

regarding the installation, use and maintenance of your dishwasher.

• The manufacturer can not be responsible

for problems caused by ignoring these safety and caution instructions.

• This dishwasher is designed for normal

indoor, domestic household use.

• Do not use the dishwasher for industrial or commercial use, or other non domestic purpose.

• The appliance is not intended for use by young children or infirm persons without supervision.

• Check packaging and the dishwasher immediately for signs of transport damage. If the appliance is damaged, do not put it into use but contact your supplier without delay.

During installation

• Electrical connection must be in accordance with the rating label.

• Electrical safety is only guaranteed when

the earth system of your house is in accordance with the related local regulations. (Do not use an extension

cable or cord.)

• If the hot water exceeds 65ºC, adjust the

water heater setting. If the hot water temperature can not be maintained below

65ºC, the dishwasher must be connected

to cold water.

• This appliance is intended to be used in

household and similar applications such as;

- Staff kitchen areas in offices and other non food retail working environments;

- Farm houses;

- By clients in hotels, motels and other residential type environments;

- Bed and breakfast type environments.

• If this product is used for commercial or

mobile purposes, it is not warranted. (Example: Public places such as restaurants, eateries or cafes, boats, mobile homes and caravans.) If the product is installed outside the normal service area, any cost of transportation involved in the repair of the product, or the replacement of a defective part, shall be borne by the owner.

• If power supply cord is damaged, it must

only be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.

• This appliance must be positioned so that

the plug is accessible.

• The appliance is to be connected to the

water mains using new hose-sets and that old hose-sets should not be reused.

During use

• Only suitable household utensils should be placed in the dishwasher.

(Please avoid utensils; that are nonheat-resistant, metal decorated, etc.)

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before use

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher, follow basic precautions, including the following:

• Do not use any kinds of solvent in your dishwasher. They may cause an explosion or fire.

• Do not spray water on the appliance. It may cause the failure of electric parts or electric shock.

• Do not push down or sit on the door when the door is opened. It may cause damage or failure of your dishwasher.

• Do not use the detergent for hand washing. Dishwasher detergent should be used for normal operation.

• This appliance is fitted with a safety

function that automatically stops the operation of the dishwasher when it is exposed to abnormal electrical disturbance on its mains.

• Dishwasher detergents are extremely

alkaline.They can be extremely dangerous if swallowed.

Avoid detergent contact with skin and eyes and keep children away from the dishwasher when the door is open.

Check that the detergent receptacle is empty after completion of each wash cycle.

Child Safety

• Controls may be locked using Child Lock

mode to prevent all the settings from being changed by a child.

• For safety reasons, the Power button will

still be operative with the Child Lock engaged.

• Keep children away from detergents and rinse-aids.

• Do not allow children to operate the dishwasher.

• Young children should be supervised to ensure that they do not play with the appliance.

Save these instructions

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and standards.

• Do not use an adapter this will defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Improper connection of the equipment-grounding conductor can result in electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

CAUTION

CAUTION concerning the Power cord

• Most appliances recommend they be placed upon a dedicated circuit; that is, a single

outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,

extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in an electric shock or fire.

• Periodically examine the cord of your appliance, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

• Protect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to water splashing or ingress of moisture.

CAUTION

The instructions shall state the substance of the following :

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

INSTALLATION INSTRUCTIONS

WARNING

A qualified electrician/plumber or competent person should carry out any electrical/

• plumbing work required to install this appliance.

Prepare cupboard opening

1. This dishwasher is designed to fit the size shown as below.

2. Select a location as close to the sink as possible for ease of connection to the water and drain pipes.

3. To ensure good drainage, the dishwasher should not be installed more than 1 meter away from the sink.

4. If the dishwasher is installed in a corner, a minimum of 5cm of space is required between the washer and an adjacent cabinet or wall.

Preparation for electrical wiring

CAUTION

For personal safety, remove house

• fuse or open circuit breaker before

installation. Do not use an extension cord or

• adapter plug with this appliance.

Electrical and earthing connections must comply with the national electrical code/ provincial and municipal code and/or other local codes.

1. This appliance must be supplied with correct rating voltage and hertz as shown on instruction manual, and connected to an individual, properly earthed branch circuit, protected by a minimum 15 amp circuit breaker or time delay fuse. Wiring must be 2 wires with Earth.

2. The power plug must be in a accessible location adjacent to and not behind the dishwasher and within 1.2 meters of the dishwasher side.(See page 9 Fig.A)

3. The power plug must be correctly earthed, if in doubt, have it checked by a qualified Electrician. No other appliance should be connected to the same plug outlet by a double adapter or similar plug.

Unit:mm

CAUTION

Any bare wood surrounding the

•

dishwasher should be sealed with a waterproof paint or sealant to prevent swelling.

Dangerous voltage

To indicate hazards arising from dangerous voltages.

Note- in case of an application warning sign, the rules according to ISO 3864 should be adhered to.

INSTALLATION INSTRUCTIONS

Preparing the dishwasher for

installation

1. Lay the dishwasher on its back.

2. Adjust the legs to the required height as shown in below figure.

Adjust

leg

3. To reduce noise attach the strip to the

machine base. (LD-1485 & LD-1484 models only)

Installing the dishwasher in

cupboard

1. Before sliding the dishwasher into the cupboard opening, all necessary height and balancing adjustments should be made using a spanner.

2. Slide the dishwasher into the cabinet, opening carefully. Make sure that the drain hose inside the cabinet is not kinked or stretched.

CAUTION

If the height of the cupboard is below

•

850mm, you can remove the top table by unscrewing the 2 screws. (Two from rear)

Remove the adhesive cover and attach the strip to the machine base, hiding the legs. Trim the edges if desired.

The bottom of the strip should touch the floor.

INSTALLATION INSTRUCTIONS

Installation of drain hose

1. If the end of drain hose does not fit to the drain line, use a rubber connector(not supplied) that is resistant to heat and detergent.

2. This should be available from a plumbing shop or a hardware store.

3. There are two typical connections as shown in Figure A, B.

The S trap spigot must be drilled out cleanly and free of obstruction to its maximum internal diameter, if used for drainage.

Connection to Waste spigot

Check the waste spigot when initially installing. An “OE” error can occur when the waste spigot below the sink is not drilled out properly. Please ensure the waste spigot connection to this drain hose has been completely drilled out before connecting and securing.

When the drain hose is connected to a separate standpipe, it is essential that an airtight connection be made. Refer to Fig.B

Fig. B : Drainage connection - stand pipe.

Drain hose Extension

Extend drain hose as shown below.

To prevent siphoning, one of the following methods must be used:

When the drain hose is connected to a sink S

trap or waste disposal unit, the hose must be looped up to the underside of the bench top and secured.

Fig. A

CAUTION

When you connect or extend drain hose,

•

make sure that the drain hose is not kinked.

(Bends should have a 40 mm radius.)

INSTALLATION INSTRUCTIONS

Installation of water inlet hose How to level the dishwasher

Some models consist of an inlet valve combined

with a hose. (Fig. A)

Connect the water supply hose to the water tap.

(Fig. B) After connecting the inlet hose to the tap, turn on the tap to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature. Connect the supply hose to the water inlet valve.

Fig. A

• This dishwasher may be fed with either hot or

cold water. If the water can not be maintained below 65ºC, the dishwasher must be connected to cold water.

• When connecting, you may use sealant tape or

sealing compound to avoid water leaks.

• Make sure that the line is not kinked or sharply

bent.

• It is recommended that the new inlet hose be

used and not an existing or old hose.

Fig. B

After installing the dishwasher, you may notice a slight sticking of the door to the dishwasher, when you open or close the door. If this does happen you need to adjust the level of the dishwasher.

Case 1. In case the door is slanted to the right

Fig. C

• If the door slants to the right, see fig. C follow

these instructions:

1) Unscrew(counter-clockwise) the left leg of the back side and correct the level.

2) Check the opening of door and repeat if necessary until the door opens and closes properly.

• When the product is correctly leveled, there

should be no slant, stickiness or rubbing sound.

Case 2. In case the door is slanted to the left

Final check and assembling

1. Securely hand tighten supply hose to the water supply. Plug the power supply cord into an earthed electrical point and switch on.

2. After installing and prior to using the dishwasher with crockery, we recommend that you use the dishwasher on Quick mode to rinse through. At this stage it is useful to ensure that there are no operating problems or water leaks. When the dishwasher is used for the first time, there may be a loud noise, if this happens, turn off the power and restart the dishwasher.

Fig. D

• If the door slants to the left, see fig. D follow

these instructions:

1) Check the opening of the door to hear if there is a sticking or rubbing sound.

2) Check the opening of door and repeat if necessary until the door opens and closes properly.

• When the product is correctly leveled, there

should be no slant, stickiness or rubbing sound.

PARTS NAME

1. Control Panel

2. Door Handle

3. Front Cover

4. Lower Cover

5. Display Window

6. Power Button

7. Drain Hose

8. Inlet Hose

9. Power Cord

10. Adjustable Leg

11. Upper Rack

12. Cutlery Basket

13. Detergent And Rinse Aid Dispenser

14. Vapor Vent Cover

15. Upper Spray Arm

16. Lower Spray Arm

17. Filter ASM

18. Lower Rack

19. Salt Container Cap

20. Cutlery Rack

21. Steam Nozzle (Steam models only)

Funnel Noise Strip

(LD-1485 & LD-1484 models only)

※ The appearance and specifications may vary without notice.

FUNCTION OF CONTROL BUTTON

MODEL : LD-1485T(W,L,M,B,C,S)4

① Programme

• Press the cycle that corresponds to your desired wash cycle.

② Rinse

• Repeated pressing of the Rinse button will select Extra Hot, Rinse+, Extra Hot & Rinse+.

• If you select the Extra Hot( ) function, the operating temperature will be up to 80℃.

(Eco, Auto, Steam Care, Steam Dual Spray, Steam Power)

• When you select Rinse+( ) an additional rinse cycle is added.

③ Child Lock ( )

• Used to lock or unlock the control buttons to prevent all the settings from being changed by a child.

• To activate or release the Child Lock function, press the Child Lock button for 3 seconds while the dishwasher is

in operation.

• All controls will be disabled except the Child Lock and Power buttons.

• Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you can

operate the dishwasher.

④ Spray

• With each press, the water spray intensity level is changed to Soft ( ), Medium( ) and Strong( ) in a sequence.

(Only Eco, Steam Care and Steam Dual Spray)

⑤ Half load

• In case of a small load, use the upper or lower rack to save energy.

• With each press, select Upper( ) or Lower( ) rack only. (Except Quick & Dry, Steam Power)

• In case you don’t select this button, the machine always defaults to vario washing, which operates upper and lower spray

arm alternately.

+ 28 hidden pages