OWNER’S MANUAL
CAR CD/MP3/WMA Receiver
Please read this manual carefully before operating your set and retain it for future reference.
LCS710BR / LCS710DAB /
LCF810BR / LCF810DAB
ΕΛΛΗΝΙΚΑ PORTUGUÊS ITALIANO ESPAÑOL FRANÇAIS DEUTSCH ENGLISH
1 GettingStarted
2 Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a
safe and legal manner before attempting such operations.
Do not use for many hours at extremely low or high temperature. (-10 °C to 60 °C)
To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture.
The temperature of unit’s outside can be extremely high, please use the unit after proper installation in your vehicle.
This unit cannot play 8 cm disc (use 12 cm disc only).
While driving, keep the sound volume at a proper level.
Do not drop it and avoid heavy impacts at anytime.
This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, lorry or bus, check the battery voltage. To avoid shorts in the electrical
system, be sure to disconnect the E battery cable before beginning the installation.
|
|
|
Getting Started |
3 |
|
CAUTION: This product employs a Laser System. |
Disposal of your old appliance |
|
|
||
To ensure proper use of this product, please read |
1. When this crossed-out wheeled bin |
|
|||
this owner’s manual carefully and retain it for future |
|
||||
symbol is attached to a product it |
|
||||
reference. Shall the unit require maintenance, |
|
||||
means the product is covered by the |
|
||||
contact an authorized service centre. |
|
||||
European Directive 2002/96/EC. |
|
||||
|
|
|
|
||
Use of controls, adjustments or the performance of |
2. All electrical and electronic products |
|
|||
procedures other than those specified herein may |
|
||||
shall be disposed of separately |
|
||||
result in hazardous radiation exposure. |
|
||||
from the municipal waste stream |
|
||||
|
|
|
|
||
To prevent direct exposure to laser beam, do not try |
via designated collection facilities |
|
|||
to open the enclosure. Visible laser radiation when |
appointed by the government or the |
|
|||
open. DO NOT STARE INTO BEAM. |
local authorities. |
|
|||
|
|
|
3. The correct disposal of your old |
|
|
|
|
|
appliance will help prevent potential |
|
|
|
|
|
negative consequences for the |
|
|
|
|
|
environment and human health. |
|
“This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do
not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators."
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2006/95/EC and ECE Regulation 10.03 (3.2.9).
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The
Netherlands
You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
(Tel : +31-(0)36-547-8888)
The unit is compatible with the steering wheel remote control. The function allows operation by sending the steering wheel remote control signal to the unit.
For details, consult with your dealer.
>Caution
When being connected in a wrong way, the unit displays as follows.
- Antenna / Remote port short : "ON PORT SHORT CIRCUIT CHECK"
After connecting it again, restart the unit.
1 GettingStarted
4 Table of Contents
Table of Contents
1
1Getting Started
2Safety Information
5Front panel [LCS710BR / LCS710DAB]
6Front panel [LCF810BR / LCF810DAB]
2
7 Remote control
7 – Battery Installation
2 Connecting
3
8About detachable control panel [LCS710BR / LCS710DAB]
8 – Attaching the control panel
8 – Detaching the control panel
49 About detachable control panel [LCF810BR / LCF810DAB]
9– Attaching the control panel
9– Detaching the control panel
10Installation
510 – Basic Installation
10 – Removing the existing receiver unit
10 – ISO-DIN Installation
11 |
Connection |
11 |
– Connecting to a car |
3 Operating
12 Operation
12 – Basic operations
12– Turning off the sound temporarily
12– Using EQ (Equalizer)
12– Checking the clock
12– Turning off the display light
12– Resetting the unit
13– Adjusting the general settings
14Listening to a CD
14 – Pausing or restarting CD playback
14– Searching for a section within a track / file
15– Skipping to another track/ file
15– Checking information about your music
15– Playing back tracks / files in a way you want
16Listening to music from an external device
16– Preventing radical changes in volume as switching sources
17Listening to the TUNER
17– Storing desired frequencies manually
17– Listening to a preset station
18– Adjusting TUNER settings
19Listening to the DAB (Only LCS710DAB / LCF810DAB)
19– Storing desired frequencies manually
19– Listening to a preset station
19– Adjusting DAB settings
20Using an USB device / SD card
20– Moving to another drive
21– Quick Search of a desired file
21– Deleting the desired file
21– Playable USB device / SD card Requirement
21– Recording to USB device / SD card
22Listening to music by connecting iPod / iPhone
22 – Pausing or restarting playback
22– Searching for a section within a track / file
22– Checking information about your music
23– Playing back tracks / files in a way you want
23– Playing back files by music menus
23– 2WAY Control
23– Compatible iPod models
24Connecting a Bluetooth wireless technology
25– Using the buttons for Bluetooth wireless technology
25– Using a Bluetooth wireless technology
26– Adjusting the setting
27– WICS (Wireless Controller & Synchronization)
28– Phone compatibility list
4 Troubleshooting
31 Troubleshooting
5 Appendix
32 Specifications
|
|
Getting Started |
5 |
|
Front panel [LCS710BR / LCS710DAB] |
|
|
||
a b c d e f g |
h |
i |
|
1 |
|
|
[Front unit detached panel] |
||
|
|
|
|
Started Getting |
j k l m n o |
p q r s t u v |
|
|
aB
Ejects a disc.
bSRC / • OFF
-When pressed, selects function sources.
-When pressed and held, powers unit on or off.
cN
Plays and pauses playback.
Temporarily stops the sound.
dVolume knob
-Adjusts volume level.
-Confirms the settings.
-Checks tracks, files or preset stations.
eF
In each mode, sets playback items.
`
Activates setting menu.
fBAND
-Selects a band in Tuner mode.
-Moves to a next USB drive. iPOD / • TA
-Searches stations that have TA / TP information, when it is pressed and held.
-Activates 2WAY Control.
gRemote Sensor
hDisplay window
i6
Opens the front panel.
jR
Recording to USB / SD card.
k
-Activates BT function.
-Answers a call.
l
Returns to the previous step.
Ends a call.
mA/D
Skip / Search / Seek / Tune
nEQ
Improves sound quality.
-When pressed, selects the EQ function.
oDISP
-Press it, you can check the clock time.
-Press and hold it, you can turn on /off the display window and the light of LED buttons.
pINT
Intro scan.
qRPT
Repeats playback.
rSHF
Shuffles playback.
sNumeric buttons (1 to 6)
Selects a numbered preset station in TUNER.
tAUX
If connected to other portable player, you can enjoy music from it on the unit.
uUSB port
vSD card slot
1 GettingStarted
6 Getting Started
Front panel [LCF810BR / LCF810DAB]
a b c d e |
f |
g h |
[Front unit detached panel]
i j k l m n |
o p q |
aSRC / • OFF
-When pressed, selects function sources.
-When pressed and held, powers unit on or off.
bN
Plays and pauses playback.
Temporarily stops the sound.
cVolume knob
-Adjusts volume level.
-Confirms the settings.
-Checks tracks, files or preset stations.
dF
In each mode, sets playback items.
`
Activates setting menu.
eBAND
-Selects a band in Tuner mode.
-Moves to a next USB drive. iPOD / • TA
-Searches stations that have TA / TP information, when it is pressed and held.
-Activates 2WAY Control.
fDisplay window
gRemote Sensor
hOPEN
Opens the front panel.
iR
Recording to USB / SD card.
j
-Activates BT function.
-Answers a call.
k
Returns to the previous step.
Ends a call.
lA/D
Skip / Search / Seek / Tune
mEQ
Improves sound quality.
-When pressed, selects the EQ function.
nDISP
-Press it, you can check the clock time.
-Press and hold it, you can turn on /off the display window and the light of LED buttons.
oAUX
If connected to other portable player, you can enjoy music from it on the unit.
pUSB port
qSD card slot
Getting Started |
7 |
Remote control
aSRC / • OFF
•When pressed, selects function sources.
•When pressed and held, powers unit off.
bFUNC
When pressed, sets playback items in each mode.
•MENU
When pressed and held, activates setting menu.
cBAND
Selects a band in Tuner mode.
DRV
Moves to a next USB drive.
dd/MPlays or pauses playback.
eSHF Shuffles playback.
fMUTE Temporarily stops the sound.
gVOLUME W/ S
Adjusts volume level.
hc/ v
Skip / Search / Seek / Tune
Returns to the previous step. w/ s
•List up / down
•Adjusts settings.
•Moves 10 MP3 / WMA tracks backward or forward if there is no folder or one folder on a CD.
•Moves to the previous or next folder if there are more than 2 folders on a CD.
ENTER / LIST
•Confirms the settings.
•Checks tracks, files or preset stations.
iDISP
•Press it, you can check the clock time.
•Press and hold it, you can turn on / off the display window and the light of LED buttons.
jRPT
Repeats playback.
kINT
Intro scan.
lNumeric buttons (1 to 6)
Selects a numbered preset station in TUNER.
Battery Installation
1.Pull out the battery holder with a sharp product like a ball point pen.
2.Put the battery with and correctly on the battery holder.
3.Push the battery holder back into its original position.
, Note
Use only one CR2025 (3 V) lithium battery.
Remove the battery if the remote control is not used for a long period of time.
Do not leave the product in a hot or humid place.
Do not handle the battery with metallic tools.
Do not store the battery with metallic materials.
1 GettingStarted
8 Connecting
About detachable control panel [LCS710BR / LCS710DAB]
Detaching the control panel
1. Press the 6 to open the control panel.
2 Attaching the control panel
Connecting
1.Align the left side of the panel with the stopper.
2.Push the right side of panel into the unit until it clicks.
>Caution
The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display.
Do not leave the control panel in any area exposed to high temperatures or direct sunlight.
Do not drop the control panel or otherwise subject it to strong impact.
Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel.
2. Push the control panel to right.
3.Pull the control panel out of the unit.
4.Put the detached control panel into the protective case.
Control panel
Protective Case
, Note
Periodically wipe the contacts on the back of the control panel with a cotton swap
moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.
|
Connecting 9 |
About detachable |
Detaching the control panel |
control panel |
1. Press the OPEN to open the control panel. |
|
|
[LCF810BR / |
|
LCF810DAB] |
|
Attaching the control panel
1. Attach part AC of the control panel to part CB of the unit.
i
h
2. Attach part C of the control panel to part D of the unit while pushing the control panel to left.
3. Close the control panel.
2. Push the control panel to left.
3.Pull the control panel out of the unit.
4.Put the detached control panel into the protective case.
k j
>Caution
The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display.
Do not leave the control panel in any area exposed to high temperatures or direct sunlight.
Do not drop the control panel or otherwise subject it to strong impact.
Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel.
Control panel
Protective Case
, Note
Periodically wipe the contacts on the back of the control panel with a cotton swap
moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.
2
Connecting
2
Connecting
10 Connecting
Installation
Basic Installation
Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting.
Bend the claws according to the thickness of the dashboard.
Control panel
1.Remove the existing receiver unit.
2.Make the necessary connections.
3.Install the installation sleeve.
4.Install the unit into the installation sleeve.
ISO-DIN Installation
Control panel
1.Slide the unit into the ISO-DIN frame.
2.Fit screws removed from the old unit.
3.Slide the unit and frame into the dash opening.
4.Install the dash panel or adapter plate.
(According to models, this step may not be needed.)
5.Install the trim ring to the unit.
6.Install the control panel to the unit.
Removing the existing receiver unit
If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed.
1.Remove the rear support from the unit.
2.Remove the control panel and trim ring from the unit.
3.Insert the lever into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve.