LG LB621120S, BIDLOV INSTALLATION MANUAL
www.lg.com
Installation Instructions
BUILT IN OVEN
Please read the instructions before installing this product.
LB621120
LB621100
BIDLOV
MFL06218410
1
Caution for safety
Any electrical installation work must be carried out by a qualified electrician or competent person.
This electric appliance must be installed according to the instructions in order to avoid a
damage.This oven should be disconnected from the power supply before installation or
maintenance. This oven should always be earthed.
The work in the low cabinet
Oven dimensions and kichen cabinet dimensions are shown in the fig-1A,1C,1D.
The oven power supply must be located in the back area (P)of kitchen cabinet or outside the
installation space (cupboard).
In accordance with the position of power supply,make a hole “P ” in the back wall or a hole “R ” in
the side wall of the kitchen cupboard to pass the connection lead.
Lift the oven and slide into the cabinet by using side holes.But do not try to lift the oven by door
handle on the front.
Take care not to kink the wires of the electrical supply cable.
If installing with hobs,follow the hob installation instruction.
P
Q
R
min. 600
min.556
min. 50
50
70
320
min. 560
50
100
100
120
100
100
R
571
583
Transport
opening
21
546
556
594
594
[fig-1A] [fig-1B]
[fig-1D][fig-1C]
2
The work in the high cabinet
Oven dimensions and kichen cabinet dimensions are shown in the fig-2A,2B.
A gap must be minimum 10mm between the rear of the installed oven and the connecting wall.
To Lift oven,use side holes of the oven (refer to arrow,Fig-2A).
Kitchen cabinet in contact with the oven must be heat resistant up to 90 °C,and close units fronts
up to at least 70 °C.
[fig-2A]
[fig-2B]
[fig-2C]
590
min.556
(min. 586~max. 596)
min. 560
50
Q
571
583
21
546
556
594
594
Transport
opening
Loading...