LG LB45, LB51 Series, LB47 Owner's Manual

Please read this manual carefully before operating
your set and retain it for future reference.

LB45**
LB47**
LB51**

OWNER’S MANUAL

LED TV

*

* LG LED TVs are LCD TVs with LED backlighting.

P/NO : MFL68062703 (1409-REV03)

Printed in Korea

www.lg.com

*MFL68062703*

2

ENG

ENGLISH

TABLE OF CONTENTS

WARNING

yIf you ignore the warning message, you

may be seriously injured or there is a
possibility of accident or death.

CAUTION

yIf you ignore the caution message, you

may be slightly injured or the product
may be damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note
carefully before using the product.

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE

NOTICE

4 SAFETY INSTRUCTIONS

10 ASSEMBLING AND PREPARING

10 Unpacking
13 Parts and buttons
14 - Using the Joystick button
15 Lifting and moving the TV
16 Setting up the TV
16 - Attaching the stand
18 - Detaching the Stand
18 Mounting on a table
19 Mounting on a wall
21 - Attaching the shelf stand
22 - How to attach to masonry walls
22 - Please follow the below direction
23 Tidying cables

23 MAKING CONNECTIONS

24 Antenna Connection
24 Adapter Connection
25 Other Connections

27 REMOTE CONTROL

28 WATCHING TV

28 Turning the TV on for the first time
28 Watching TV
28 Managing programmes
28 - Automatically setting up programme
29 - Manually setting up programme
30 - Editing your programme list
30 - Selecting a programme on the

programme list
30 Using additional options
30 - Adjusting aspect ratio
31 - Changing AV modes
32 - Using the input list

32 ENTERTAINMENT

32 Connecting USB storage devices
34 Browsing files
35 Viewing photos

36 Listening to music
38 Viewing movies
41 DivX® VOD Guide

42 CUSTOMIZING TV SETTING

42 Accessing main menus
42 Customizing Settings
42 - SETUP Settings
43 - PICTURE Settings
46 - AUDIO Settings
48 - TIME Settings
48 - OPTION Settings
49 - LOCK Settings
49 - ENTERTAINMENT Settings

50 TELETEXT

50 Switch On/Off
50 Simple Text
50 - Page selection
50 - Programming a colour button in LIST

mode
50 Fastext
50 - Page selection
51 Special Teletext Function

52 MAINTENANCE

52 Cleaning your TV
52 - Screen, frame, cabinet and stand
52 - Power cord

52 TROUBLESHOOTING

53 SPECIFICATIONS

3

ENGENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC,
a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that has passed rigorous testing to verify that it plays DivX video. Visit divx
com for more information and software tools to convert your files into DivX
videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must
be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in
your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to [e-mail]. This offer is valid for three (3) years from the date on which you purchased
the product.

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and/or remote control
in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a
bathroom

- Near any heat source such as stoves
and other devices that produce heat

- Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric
shock, malfunction or product deformation.

y

Do not place the product where it might
be exposed to dust.
This may cause a fire hazard.

y

Mains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.

y

Do not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.

y

Make sure to connect Mains cable
to compliant AC mains socket with
Grounded earth pin. (Except for devices
which are not grounded on earth.)
Otherwise possibility you may be
electrocuted or injured.

y

Insert power cable plug completely into
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.

y

Ensure the power cord does not come
into contact with hot objects such as a
heater.
This may cause a fire or an electric shock
hazard.

y

Do not place a heavy object, or the
product itself, on power cables.
Otherwise, this may result in fire or
electric shock.

y

Bend antenna cable between inside and
outside building to prevent rain from
flowing in.
This may cause water damaged inside
the Product and could give an electric
shock.

5

ENGENGLISH

SAFETY INSTRUCTIONS

y

When mounting TV onto wall make sure
to neatly install and isolate cabling from
rear of TV as to not create possibility of
electric shock /fire hazard.

y

Do not plug too many electrical devices
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.

y

Do not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.

y

Keep the anti-moisture packing material
or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the
reach of children.

y

Do not let your children climb or cling
onto the TV. Otherwise, the TV may fall
over, which may cause serious injury.

y

Dispose of used batteries carefully
to ensure that a small child does not
consume them. Please seek Doctor­Medical Attention immediately if child
consumes batteries.

y

Do not insert any metal objects/
conductors (like a metal chopstick/
cutlery/screwdriver) between power cable
plug and input Wall Socket while it is
connected to the input terminal on the
wall. Additionally, do not touch the power
cable right after plugging into the wall
input terminal. You may be electrocuted.
(Depending on model)

y

Do not put or store inflammable
substances near the product. There
is a danger of combustion/explosion
or fire due to careless handling of the
inflammable substances.

y

Do not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service
centre.

y

Do not spray water on the product or
scrub with an inflammable substance
(thinner or benzene). Fire or electric
shock accident can occur.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not allow any impact, shock or any
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.

y

Never touch this product or antenna
during a thunder or lighting storm.
You may be electrocuted.

y

Never touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.

y

Do not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.

y

If any of the following occur, unplug the
product immediately and contact your
local service centre.

- The product has been impacted by
shock

- The product has been damaged

- Foreign objects have entered the
product

- The product produced smoke or a
strange smell

This may result in fire or electric shock.

y

Unplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.

y

Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.

y

Do not install this product on a wall if it
could be exposed to oil or oil mist.
This may damage the product and cause
it to fall.

CAUTION

y

Install the product where no radio wave
occurs.

y

There should be enough distance
between an outside antenna and power
lines to keep the former from touching the
latter even when the antenna falls.
This may cause an electric shock.

y

Do not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.

7

ENGENGLISH

SAFETY INSTRUCTIONS

y

If you install the TV on a stand, you need
to take actions to prevent the product
from overturning. Otherwise, the product
may fall over, which may cause injury.

y

If you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of
the product. When you install the set to
use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.

y

Only use the attachments / accessories
specified by the manufacturer.

y

When installing the antenna, consult
with a qualified service technician. If not
installed by a qualified technician, this
may create a fire hazard or an electric
shock hazard.

y

We recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.

y

Only use the specified type of battery.
This could cause damage to the remote
control.

y

Do not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.

y

Batteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.

y

Do not place non-rechargeable batteries
in charging device.

y

Make sure there are no objects between
the remote control and its sensor.

y

Signal from Remote Control can
be interrupted due to external/
internal lighting eg Sunlight, fluorescent
lighting.If this occurs turn off lighting or
darken viewing area.

y

When connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.

y

Do not turn the product On/Off by
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.

y

Please follow the installation instructions
below to prevent the product from
overheating.

- The distance between the product and
the wall should be more than 10 cm.

- Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).

- Do not install the product on a carpet or
cushion.

- Make sure the air vent is not blocked by
a tablecloth or curtain.

Otherwise, this may result in fire.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Take care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.

y

Periodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.

y

Prevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.

y

Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.

y

Do not press strongly upon the panel
with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it, as
it may cause damage to screen.

y

Avoid touching the screen or holding
your finger(s) against it for long periods
of time. Doing so may produce some
temporary or permanent distortion/
damage to screen.

y

When cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).

y

As long as this unit is connected to the
AC wall outlet, it is not disconnected from
the AC power source even if you turn off
this unit by SWITCH.

y

When unplugging the cable, grab the
plug and unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power
cord from the power board, as this could
be hazardous.

y

When moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.

y

When moving or unpacking the product,
work in pairs because the product is
heavy.
Otherwise, this may result in injury.

9

ENGENGLISH

SAFETY INSTRUCTIONS

y

Contact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.

y

Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.

y

If the product feels cold to the touch,
there may be a small “flicker” when it is
turned on. This is normal, there is nothing
wrong with product.

y

The panel is a high technology display
product with resolution of two million
to six million pixels. You may see tiny
black dots and/or brightly coloured dots
(red, blue or green) at a size of 1 ppm
on the panel. This does not indicate
a malfunction and does not affect the
performance and reliability of the product.
This phenomenon also occurs in third­party products and is not subject to
exchange or refund.

y

You may find different brightness and
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is
not malfunction.

y

Displaying a still image (e.g.,
broadcasting channel logo, on-screen
menu, scene from a video game) for a
prolonged time may cause damage to
the screen, resulting in retention of the
image, which is known as image sticking.
The warranty does not cover the product
for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more
hours for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in third­party products and is not subject to
exchange or refund.

y

Generated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off
the TV is generated by plastic thermal
contraction due to tempera-ture and
humidity. This noise is common for
products where thermal deformation is
required. Electrical circuit humming/panel
buzzing: A low level noise is generated
from a high-speed switching circuit, which
supplies a large amount of current to
operate a product. It varies depend-ing
on the product.
This generated sound does not affect the
performance and reliability of the product.

y

Do not use high voltage electrical goods
near the TV (e.g. electric mosquito­swatter). This may result in product
malfunction.

10

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you

are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s

warranty.
ySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

yUse a certified cable with the HDMI logo attached.
yIf you do not use a certified HDMI cable, the screen may not display or a connection error may

occur. (Recommended HDMI Cable Types)

- High-Speed HDMI™ Cable

- High-Speed HDMI™ Cable with Ethernet

11

ENGENGLISH

ASSEMBLING AND PREPARING

Remote control,
batteries (AAA)

(See p.27)

Owner’s manual Cable Holder

(See p.23)

Power Cord

(See p.24)

AC-DC Adapter

(See p.24)

AC-DC Adapter

(See p.24)
(Depending on model)

Stand Base

(Only LB45**-TA/TC/TJ,
LB47**-TD)
(See p.16)

Stand Base

(Only LB45**-TB/TG/TK,
LB47**-TE)
(See p.16)

Stand Bases

(Only LB45**-TE/TI,
LB47**-TF)
(See p.17)

Stand Body

(Only LB51**)
(See p.21)

Stand Body

(Only LB51**)
(See p.17)

Stand Base

(Only LB51**)
(See p.17, 21)

(Depending on model)

or

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

Stand Screws

2EA, M4 x L10
(Only 28/29LB45**-TE,
28LB47**-TF)
(See p.17)

Wall mount screws

3EA, M5 x L69.5
(Only LB51**)
(See p.21, 22)

Wall mount anchors

3EA
(Only LB51**)
(See p.22)

Stand Rack Screws

3EA, M4 x L8
(Only LB51**)
(See p.21)

Wall Plate

(Only LB51**)
(See p.21)

Stand Screws

4EA, M4 x L14
(Only LB51**)
(See p.17)

13

ENGENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Speakers

Screen

Joystick button

(* This button is located
below the TV screen.)

Power Indicator

yLighting On: When

Power is turned off

yLighting Off: When

Power is turned on

Remote control sensor

A type : LB45**-TA/TC/TJ, LB47**-TD

C type : LB45**-TE/TI, LB47**-TF

B type : LB45**-TB/TG/TK, LB47**-TE

Speakers

Screen

Joystick button

(* This button is located
below the TV screen.)

Power Indicator

yLighting On: When

Power is turned off

yLighting Off: When

Power is turned on

Remote control sensor

Speakers

Screen

Joystick button

(* This button is located
below the TV screen.)

Power Indicator

yLighting On: When

Power is turned off

yLighting Off: When

Power is turned on

Remote control sensor

D type : LB51**

Speakers

Screen

Joystick button

(* This button is located
below the TV screen.)

Power Indicator

yLighting On: When

Power is turned off

yLighting Off: When

Power is turned on

Remote control sensor

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Using the Joystick button

You can simply operate the TV functions, by pressing to turn ON/OFF or sliding your finger over
joystick button moving up, down, left or right.

Basic Functions

Power On

When the TV is turned off, place your finger on the joystick
button and press it once and release it.

Power Off

When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)

Volume
Control

If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.

Programmes
Control

If you place your finger over the joystick button and move it up
or down, you can scroll through the saved programmes you
want.

NOTE

yWhen your finger is over the joystick button and you are sliding finger forward/back ,left or right,

be careful not to press down to hard on joystick. If you press the joystick button first, you may

not be able to adjust the volume level and saved programmes.

Adjusting the Menu

When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( ) moving the joystick button up, down, left or right.

TV Off Turns the power off.

Settings Accesses the main menu.

Close Clears on-screen displays and returns to TV viewing.

Input List Changes the input source.

15

ENGENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.

CAUTION

yAvoid touching the screen at all times, as

this may result in damage to the screen.

yIt is recommended to move the TV in the

box or packing material that the TV originally
came in.

yBefore moving or lifting the TV, disconnect

the power cord and all cables.

yWhen holding the TV, the screen should face

away from you to avoid damage.

yHold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

yWhen transporting a large TV, there should

be at least 2 people.

yWhen transporting the TV by hand, hold the

TV as shown in the following illustration.

yWhen transporting the TV, do not expose the

TV to jolts or excessive vibration.

yWhen transporting the TV, keep the TV

upright, never turn the TV on its side or tilt
towards the left or right.

yDo not apply excessive pressure to cause

exing / bending of frame chassis as it may

damage screen.

CAUTION

yWhen handling the TV, be careful not to

damage the protruding joystick button.

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

1

2

(Only LB45**-TB/TG/TK, LB47**-TE)

Stand Base

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

1

2

Stand Base

(Only LB45**-TA/TC/TJ, LB47**-TD)

17

ENGENGLISH

ASSEMBLING AND PREPARING

CAUTION

yWhen attaching the stand to the TV

set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

2

(Only LB45**-TE/TI, LB47**-TF)

1

Stand Base

2EA

M4 x L10
(Only
28/29LB45**-TE,
28LB47**-TF)

2

3

1

(Only LB51**)

M4 x L14

4EA

Stand Body

Stand Base

18

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1 Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (minimum) space from
the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

yDo not place the TV near or on sources

of heat, as this may result in fire or other
damage.

WARNING

yIf a television is not positioned in a

sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:

»Using cabinets or stands

recommended by the manufacturer
of the television.

»Only using furniture that can safely

support the television.

»Ensuring the television is not

overhanging the edge of the
supporting furniture.

»Not placing the television on tall

furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.

»Not standing the televisions on cloth

or other materials placed between
the television and supporting
furniture.

»Educating children about the dangers

of climbing on furniture to reach the
television or its controls.

Detaching the Stand

(Only 20/22/24LB45**-TE/TI, 22LB47**-TF)

NOTE

y

Lift up the bottom of the stand base and
detach the stand base from the TV.

2

(Only LB51**)

NOTE

yWhen detaching the stand body from TV,

detach the stand body with lifting up the
lever in the direction of the arrow.

1

M4 x L14

4EA