Lg Lau181cnw, Lan181cnw Owner's Manual

ENGLISH
LG Room Air Conditioner
INSTALLATION MANUAL
LG
website http://www.lgservice.com
• Please read this instruction manual completely before installing the product.
• When the power cord is damaged, replacement should be performed by authorized personnel only.
• Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
• Please retain this installation manual for future reference after reading it thoroughly.
FRANÇAIS ESPAÑOL
2 Room Air Conditioner
Room Air Conditioner Installation Manual
TABLE OF CONTENTS
Safety Precautions............................3
Introduction........................................9
Symbols used in this manual..........9
Features...........................................9
Installation........................................10
Installation parts ............................10
Installation tools.............................10
Installation map..............................11
Confirm The Refrigerant ...............12
Selecting the best location ...........13
Piping length and elevation...........14
Preparing work for installation ......15
Fixing installation plate..................16
Drilling a hole in the wall...............16
Flaring work...................................17
Connecting the piping ..................18
Connection Of The Drain Hose....21
Connecting the cables ..................22
Checking the drainage..................25
Forming the piping.........................26
Air purging......................................27
Charging.........................................29
Panel front assembly.....................30
Test running ...................................31
Four type "A" screws & plastic
anchors
Connecting cable
Installation guide map
Pipes: Gas side .......1/2"(12.7mm)
Liquid side....1/4"(6.35mm)
(Refer to page 13)
Insulation materialsAdditional drain pipe
(Outer diameter.........3/4"(19mm))
Two type "B" screws
Level gaugeScrew driverElectric drillHole core drill(ø2.76"(70mm))Horizontal meter
Flaring tool setSpecified torque wrenches
1.8kg.m, 4.2kg.m, 5.5kg.m,
6.6kg.m (different depending on model No.)
Spanner........................Half union
A glass of waterScrew driver
Hexagonal wrench(5/32"(4mm))Gas-leak detectorVacuum pumpGauge manifold
Owner's manualThermometerRemote control holder
Installation
Requirements
Required Parts Required T ools
Installation Manual 3
ENGLISH
Safety Precautions
To prevent the injury of the user or other people and proper ty damage, the following instructions must be followed.
Be sure to read before installing the air conditioner.
Be sure to obser ve the cautions specified here as they include important items related to safety.
Incorrect operation due to ignoring instr uction will cause har m or damage. The seriousness is
classified by the following indications.
The meanings of the symbols used in this manual are as shown below.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to properties only.
Be sure not to do.
Be sure to follow the instruction.
Safety Precautions
Installation
Do not use damaged power cords, plugs, or a loose socket.
• There is risk of fire or electric shock.
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.
• There is risk of fire or electric shock.
Always use the power plug and socket with the ground terminal.
• There is risk of electric shock.
Install the panel and the cover of control box securely.
• There is risk of fire or electric shock.
Do not modify or extend the power cord.
• There is risk of fire or electric shock.
Do not install, remove, or re­install the unit by yourself (customer).
• There is risk of fire, electric shock, explosion, or injury.
4 Room Air Conditioner
Safety Precautions
Operation
Be cautious when unpacking and installing the product.
• Sharp edges could cause injury.Be especially careful of the case edges and the fins on the condenser and evaporator.
For installation, always contact the dealer or an Authorized Service Center.
• There is risk of fire, electric shock, explosion, or injury.
Do not install the product on a defective installation stand.
• It may cause injury, accident, or damage to the product.
Be sure the installation area does not deteriorate with age.
• If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.
Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.
• Moisture may condense and wet or damage furnishings.
Take care to ensure that power cords could not be pulled out or damaged during operation.
• There is risk of fire or electrical shock.
Do not place anything on the power cord.
• There is risk of fire or electric shock.
Do not turn the air­conditioner ON or OFF by plugging or unplugging the power plug.
• There is risk of fire or electrical shock.
Installation Manual 5
ENGLISH
Safety Precautions
Use a dedicated outlet for this appliance.
• There is risk of fire or electrical shock.
Grasp the plug to remove the cord from the outlet. Do not touch it with wet hands.
• There is risk of fire or electrical shock.
Do not place a heater or other appliances near the power cable.
• There is risk of fire and electric shock.
Do not allow water to run into electric parts.
• It may cause There is risk of fire, failure of the product, or electric shock.
Do not store or use flammable gas or combustibles near the air conditioner.
• There is risk of fire or failure of product.
Do not use the product in a tightly closed space for a long time.
• Oxygen deficiency could occur.
When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on. DO NOT use the telephone or turn switches on or off.
• There is risk of explosion or fire.
Unplug the unit if strange sounds, odors, or smoke comes from it.
• There is risk of electrical shock or fire
Stop operation and close the window in storm or hurricane. If possible, remove the air conditioner from the window before the hurricane arrives.
• There is risk of property damage, failure of product, or electric shock.
Thinner
Wax
6 Room Air Conditioner
Safety Precautions
Installation
Do not open the inlet grill of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)
• There is risk of physical injury, electric shock, or product failure.
When the product is soaked (flooded or submerged), contact an Authorized Service Center.
• There is risk of fire or eletric shock.
Ventilate the product from time to time when operating it together with a stove, etc.
• There is risk of fire or electrical shock.
Unplug the appliance before performing cleaning or maintenance.
• There is risk of electrical shock.
When the product is not be used for a long time, disconnect the power supply plug or turn off the breaker.
• There is risk of product damage or failure, or unintended operation.
Take care to ensure that nobody could step on or fall onto the outdoor unit.
• This could result in personal injury and product damage.
Always check for gas (refrigerant) leakage after installation or repair of product.
• Low refrigerant levels may cause failure of product.
Install the drain hose to ensure that water is drained away properly.
• A bad connection may cause water leakage.
Keep level even when installing the product.
• To avoid vibration or water leakage.
90˚
Safety Precautions
Installation Manual 7
ENGLISH
Operation
Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.
• It may cause a problem for your neighbors.
Use two or more people to lift and transport the air conditioner.
• Avoid personal injury.
Do not install the product where it will be exposed to sea wind (salt spray) directly.
• It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.
Do not direct airflow at room occupants. (Don't sit in the draft.)
• This could damage your health.
Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.
• There is risk of damage or loss of property.
Do not block the inlet or outlet of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.
• There is risk of fire, electric shock, or damage to the plastic parts of the product.
Do not touch the metal parts of the product when removing the air filter.They are very sharp!
• There is risk of personal injury.
Do not step on or put anyting on the product. (outdoor units)
• There is risk of personal injury and failure of product.
8 Room Air Conditioner
Safety Precautions
Always insert the filter securely. Clean the filter every two weeks or more often if necessary.
• A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.
Do not insert hands or other objects through the air inlet or outlet while the air conditioner is plugged in.
• There are sharp and moving parts that could cause personal injury.
Do not drink the water drained from the unit.
• It is not sanitary and could cause serious health issues.
Use a firm stool or ladder when cleaning or maintaining the air conditioner.
• Be careful and avoid personal injury.
Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries.
• There is risk of fire or explosion
Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.
• They may burn or explode.
If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked.
• The chemicals in batteries could cause burns or other health hazards.
Disuse
Introduction
Installation Manual 9
ENGLISH
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the air conditioner.
This symbol indicates special notes.
NOTICE
Introduction
Symbols used in this Manual
Features
Signal Receptor
Front Panel
Air Inlet
Air Discharge
Power Cord
Air Filter
Air Intake Vents
Air Outlet Vents
Connecting Wires
Piping
Drain Hose
Base Plate
NEO Plasma Filter
10 Room Air Conditioner
Installation
Type "A" screw and plastic anchor
Type "B" screw
Remote control holder
Installation plate
Figure FigureName
Screw driver
Electric drill
Measuring tape, Knife
Hole core drill
Spanner
Torque wrench
Ohmmeter
Hexagonal wrench
Ammeter
Gas-leak detector
Thermometer,
Horizontal meter
Flaring tool set
Name
Installation Parts
Installation T ools
Installation
Read carefully, and then follow step by step.
Loading...
+ 22 hidden pages