Test Report No.: GETEC-E3-05-088
FCC Class B Certification
APPENDIX H
: USER’S MANUAL
EUT Type: 23” LCD Monitor
FCC ID: BEJL2300BN
User’s Guide
L2300B
L2300C
Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the back cover and quote this information to your dealer when you require service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is off.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~30˚
Swivel : 90˚
Height Range : maximun 3.15 inch (80.0mm)
80.0mm
Unfasten the [Stand lock] clockwise to adjust the height of the stand.
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
A3
Connecting the Display
Using the Computer
1. Place the monitor in a convenient, well-ventilated location near your computer. To adjust height of your monitor, unlock the stand lock on top of the stand.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection.
3. Connect the power cord into a proper power outlet that is easily accessible and close to the display.
Power Cord |
Signal Cable |
|
RS-232C* |
Digital signal Analog signal |
|
OUT DVI-D* |
D-sub* |
IN
* Varies according to model.
PUSH
Wall-outlet type*
2
PC-outlet type*
PC |
When connecting DVI-D signal cable |
|
When connecting D-SUB signal cable |
MAC |
Mac adapter |
|
|
|
For Apple Macintosh use, |
|
a separate plug adapter is |
|
needed to change the |
|
15 pin high density (3 row) |
|
D-sub VGA connector on |
|
thesupplied cable to a 15 pin |
|
2 row connector. |
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
A4
Connecting the Display
To arrange cables in order
1. Press the push button, and pull the stand cover down to separate it from the stand.
Stand cover
Push button
2. After connecting cables, put the stand cover correctly into the holes on the stand. If securely connected, you can hear the click sound from the latch.
PUSH
A5
Control Panel Functions
Front Panel Controls
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Control |
|
Function |
|
|||||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
Power Button |
Use this button to turn the display on or off. |
|
|||||
|
|
|
|
|
|||||
|
|
Power (DPMS) |
This Indicator lights up green when the display |
|
|||||
|
|
Indicator |
operates normally. If the display is in DPM (Energy |
|
|||||
|
|
|
|
|
Saving) mode, this indicator color changes to amber. |
|
|||
|
|
|
|
|
|
|
|||
|
|
|
|
|
Use this button to enter or exit the On Screen |
|
|||
|
|
MENU Button |
|
||||||
|
|
Display. |
|
||||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
|
|
|
Buttons |
Use these buttons to choose or adjust items in |
|
|||
|
|
|
|
the On Screen Display. |
|
||||
|
|
|
|
|
|
||||
|
|
|
|
|
|||||
|
|
AUTO/SELECT |
Use this button to enter a selection in the On Screen |
|
|||||
|
|
|
Button |
Display. |
|
||||
|
|
|
|
|
|
|
|
|
|
A6
Control Panel Functions
Control |
Direct Access Function |
Bring up Contrast and Brightness adjustment.
AUTO adjustment function
When adjusting your display settings, always press the AUTO/SELECT button before entering the On Screen
Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).
The best display mode is
L2300B monitor : 1920x1200@60Hz L2300C monitor : 1360x768@60Hz
SOURCE Selection:
SOURCE ▼▲ AUTO/SELECT
Use this button to make DVI DIGITAL, DSUB ANALOG connector active. This feature is used when two computers are connected to the display. The default setting is Dsub.
•DVI DIGITAL
•DSUB ANALOG
CONTROLS LOCKED/UNLOCKED: MENU and
This function allows you to secure the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button and button for 5 seconds: the message “CONTROLS LOCKED” appears.
You can unlock the OSD controls at any time by pushing the MENU button and button for 5 seconds:
the message “CONTROLS UNLOCKED” will appear.
A7
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the |
or Buttons. When the icon you want |
|
becomes highlighted, press the AUTO/SELECT Button. |
||
Use the |
Buttons to adjust the item to the desired level. |
Accept the changes by pressing the AUTO/SELECT Button.
Exit the OSD by pressing the MENU Button.
A8
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment, and setting menus.
Main menu |
Sub menu |
D |
Reference |
CONTRAST/ |
CONTRAST |
|
To adjust the brightness and |
BRIGHTNESS |
BRIGHTNESS |
|
contrast of the screen |
COLOR |
USER(R/G/B) |
|
To customize the color of the |
|
|
||
ADJUSTMENT 9300K |
|
screen |
|
|
6500K |
|
|
IMAGE |
H POSITION |
|
To adjust the position of the |
POSITION |
V POSITION |
|
screen |
TRACKING |
AUTO |
|
To improve the clarity and |
|
|
||
|
CLOCK |
|
stability of the screen |
|
PHASE |
|
|
SETUP |
LANGUAGE |
|
To customize the screen status |
|
IMAGE SIZE |
|
for a user's operating environment |
|
|
|
|
|
TRANSPARENCY |
|
|
|
ZOOM |
|
|
|
SET ID |
|
|
OSD |
HORIZONTAL |
|
To adjust position of the OSD |
POSITION |
VERTICAL |
|
window on the screen |
|
|
|
: Analog Input
: Digital Input
NOTE
The order of icons may differ depending on the model (A9~A12).
A9
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu.
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
To adjust the brightness and contrast of the screen
OSD Adjust |
Description |
CONTRAST
To adjust the contrast of the screen.
BRIGHTNESS
To adjust the brightness of the screen.
To customize the color of the screen
OSD Adjust |
Description |
USER |
9300K |
6500K |
RED/GREEN/BLUE
Set your own color levels.
Select the screen color.
•9300K: Slightly bluish white.
•6500K: Slightly reddish white.
To adjust the position of the screen
OSD Adjust |
Description |
Horizontal Position
To move image left and right.
Vertical Position
To move image up and down.
A10