LG L2104-DP Owner’s Manual

L2104-DN / L2104-DP

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Regulatory Notices For U.S.A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

•A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user.

•Caution: Danger of explosion if battery is incorrectly re placed. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

•Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings.

Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.

Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.

Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

Caution: This installation should be made by a qualified service person and should conform to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Caution: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

Disposal of your old appliance

1.When this crossed-out wheeled bin

symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential

requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.

European representative :

LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere,

The Netherlands (Tel : +31-(0)36-547-8888)

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accord ance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

Cautions for Safe Operation

Power Supply

This camera must always be operated at DC 12V Certified/Listed, class 2 power supply only.

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or metallic material inside the body. If used with foreign matter inside, the camera is liable to fail or to get cause of fire or electric shock.

•Remove dust or dirt on the surface of the lens with a blower.

•Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent then wipe dry.

•Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides. They may damage the surface nish and/or impair the oper ation of the camera.

Operating and storage location

Avoid viewing a very bright object (such as light ttings) dur - ing an extended period. Avoid operating or storing the unit in the following locations.

•Extremely hot or cold places (operating temperature -10 °C to 50 °C, however, we recommend that the unit be used within a temperature range of 0 °C to 45 °C)

•Damp or dust place

•Places exposed to rain

•Places subject to strong vibration

•Close to generators of powerful electromagnetic radia tion such as radio or TV transmitters.

Contents

Features ..........................................................................................	8
Part Names and Functions ................................................	9
Connections ................................................................................	10
Installation ...................................................................................	11
Installing the camera on a ceiling or wall .........................	11
Adjustment ....................................................................................	13
Lens Focus Adjustment ..........................................................	14
Menu Operation .........................................................................	15
OSD Menu Overview ..............................................................	16
General Operation ..................................................................	18
Exposure Settings ..................................................................	19
BLC/LSC setting ......................................................................	19
BRIGHTNESS setting ...............................................................	20
AGC (Automatic Gain Control) setting................................	20
SHUTTER (Shutter Speed) setting ......................................	20
White Balance settings .................................................................	21

Day/Night Setting ...............................................................	22
Motion Detection Setting .................................................	23
Privacy Setting .......................................................................	25
Special Menu Settings ......................................................	26
Setting the SHARPNESS .............................................	26
Setting the MONITOR .................................................	26
Setting the GAMMA effect ..........................................	26
Setting MIRROR effect .................................................	26
Setting USER TITLE ........................................................	27
DPC Setting ..................................................................	28
LANGUAGE Setting ......................................................	28
Reset Setting .................................................................................	29
Specification- ...............................................................................	30

Featur es

This Color Video Camera is designed for installation in an indoor video surveillance system.

This manual contains instructions on how to install and manage the Color Video Camera in your video surveillance system. Should you require any technical assistance, please contact authorized service center.

•1/3" SUPER HAD COLOR CCD II

•Resolution: 540TV Lines

•DAY/NIGHT Automatically change

•3.6mm Fixed Focus lens (F2.0)

•Min. illumination 0.05 Lux

•Use of DC 12V

•3 Axis Adjustable

•OSD Adjustment

•Easy, Simple & Convenient installation

Accessories

DOME CAMERA

VIDE O OUTPUT