LG L204WTX-SF, L204WT-SF Owner’s Manual

User’s Guide

L194WT

L204WT L194WTM L204WTM

L194WTQ L204WTQ

L194WTX L204WTX

Make sure to read the Important Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for furture reference.

See the label attached on the product and give the information to your

dealer when you ask for service.

Important Precautions

This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

Do not Open the Display.

There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. During a lightning storm or when the display is to be left unattended for an extended period of time, unplug it from the wall outlet.

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

On Cleaning

Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display

screen because over-spraying may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

Connecting the speakers

DC-OUT

D-SUB

DVI-D

AC-IN

DC-OUT

D-SUB

DVI-D

AC-IN

DC-OUT

D-SUB

DVI-D

AC-IN

The feature is only for speaker models - L194WTM, L204WTM

Connecting the speaker

Place the monitor with its front facing downward on a soft cloth.

2. nsert the protruding hook of the speaker in the direction of the slot in the back of the product.

Slot

Hook

Audio DC-In

Cable

3. After setting up the speaker, connect the Audio DC-In Cable to the back of the product.

20.1 inch monitor

19 inch monitor

Connecting the Display

REAR

FRONT

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Connecting the stand

Place the monitor with its front facing downward on a soft cloth.

2. Assemble the Stand Body into the product in the correct direction as shown in the picture.

Make sure you push it until you hear it “click”.

3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.

4. Once assembled take the monitor up carefully and face the front side

Important

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Once you connect the stand base, try not to disconnect it.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

Connecting the Display

To remove the Stand:

1. Put a cushion or soft cloth on a flat surface.

2. Place the monitor face down on

the cushion or soft cloth.

3. Hold the product as it follows and lift up the Stand slightly.

4. Change your hold on the product as it follows and turn the Stand Base in the arrow

direction.

The Head part

The Stand base part

5. Pull out the Stand to remove.

Connecting the Display

To remove the Stand Base:

Type. A

1. Ensure there are two short and two long

latches at the bottom of the Stand Base.

3. Press inside the two long latches at the

same time with your strength as it follows.

Hold the body of the Stand as it follows.

4. Keep pressing the two latches and use the other

hand to hold the body of the Stand to push the Stand Base in the arrow direction to remove.

5. The body of the Stand and the Stand Base are successfully separated.

Connecting the Display

To remove the Stand Base:

Type. B

1. Ensure there are four latches at the

bottom of the Stand Base.

Hold the body of the Stand as it follows.

3. Press inside the four latches individually toward each end.

4. Put the Stand Base on a flat surface and pull

up the body of the Stand while holding the Stand Base with the other hand. to remove.

5. The body of the Stand and the Stand

Base are successfully separated.

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Positioning your display

1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚~20˚

Warning:

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.

When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).

Connecting the Display

Using the Computer

1. Place the monitor in a convenient, well-ventilated location near your computer.

2. Connect the signal cable. When attached, tighten the thumbscrews to secure the

connection.

3. Connect the power cord into a proper power outlet that is easily accessible and close to

the display.

19 inch monitor

NOTE

This is a simplified representation

of the rear view. This rear view represents a general model; your display may differ from the view as shown.

Power Cord

Wall-outlet type

Analog signal

Varies according to model.

Signal Cable

Digital signal

D-sub

DVI

PC-outlet type

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

DVI-D(This feature is not available in all countries.)

+ 22 hidden pages