LG L203WTN Users manual

Test Report No.: GETEC-E3-05-085

FCC Class B Certification

APPENDIX H

: USER’S MANUAL

EUT Type: 20” LCD Monitor

FCC ID: BEJL203WTN

User’s Guide

L203WT

L203WTX

Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference.

See the label attached on the product and quote this information to your dealer when you require service.

Important Precautions

This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential e shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

Do not Open the Display.

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display. During a lightning storm or when the display is to be left unattended for an extended period of time, unplug it from the wall outlet.

A1

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

A2

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Unfolding the stand base

1. Place the monitor with its front facing downward on a cushion or soft cloth.

2. Hold down the release button inside the stand and strongly pull out the stand with your two hands.

The stand won't move if you don't press release button.

If the release button does not operate easily, fold the stand a bit more, and then press the release button button.

Important

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

A3

Connecting the Display

Using the Computer

1.Place the monitor in a convenient, well-ventilated location near your computer.

2.Connect the signal cable. When attached, tighten the thumbscrews to secure the

connection.

3.Connect the power cord into a proper power outlet that is easily accessible and close to the display.

Analog signal Digital signal

Varies according to model.

Wall-outlet type

1

2

	PC-outlet type
PC	DVI-D cable (not included)
PC	D-SUB cable

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

4. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the ‘AUTO/SELECT’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.

A4

Control Panel Functions

Front Panel Controls

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press the AUTO/SELECT button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).

The best display mode is

20 inch monitor : 1680x1050

A5

Control Panel Functions

Control

Function

Buttons Use these buttons to choose or adjust items in the On Screen Display.

Buttons

For more information, refer to page A12

Buttons

P I C T U R E

For more information, refer to page A10

M E N U

							Use this button to enter or exit the On Screen Display.
	MENU Button
							OSD LOCKED/UNLOCKED
							This function allows you to lock the current control
							settings, so that they cannot be inadvertently changed.
							Press and hold the MENU button for serval seconds.
							The message "OSD LOCKED" should appear.
							You can unlock the OSD controls at any time by pushing
							the MENU button for serval seconds. The message
							"OSD UNLOCKED" should appear.
	SOURCE			SOURCE hot key
	Button			Use this button to make D-sub or DVI connector active.
				This feature is used when two computers are connected
				to the display. The default setting is D-sub.

A6

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.

NOTE

Allow the display to stabilize for at least 30 minutes before making image adjustments.

To make adjustments in the On Screen Display, follow these steps:

MENU	AUTO/SETLECT
	MENU	MENU
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the or		Buttons. When the icon you want
becomes highlighted, press the AUTO/SELECT Button.
Use the	Buttons to adjust the item to the desired level.

Accept the changes by pressing the MENU Button.

Exit the OSD by Pressing the MENU Button.

A7

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment, and setting menus.

Main menu	Sub-menu		A D	Reference
PICTURE	BRIGHTNESS			brightness,
	CONTRAST			contrast and gamma of the
				screen
	GAMMA
COLOR	PRESET	6500K		To customize the color of
		9300K		the screen
	RED
	GREEN
	BLUE
POSITION	HORIZONTAL			To adjust the position of the
				screen
	VERTICAL
TRACKING	CLOCK			To improve the clarity and
				stability of the screen
	PHASE
SETUP	LANGUAGE			To customize the screen
				status for a user's operating
	OSD	HORIZONTAL
				environment
	POSITION VERTICAL

WHITE BALANCE

POWER INDICATOR

FACTORY RESET

FLATRON MOVIE/TEXT

F-ENGINE

USER

desired image settings

NORMAL

: Analog Input

: Digital Input

NOTE

The order of icons may differ depending on the model (A8~A12).

A8