LG J10D-SF, J10D-SA Owner's Manual

Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.

J10D-A_JA1ULLA_ENG_2485

Compact Home Theater
System

OWNER’S MANUAL

MODEL: LFD790

SPEAKERS: J10D-SF/J10D-SA

© Copyright 2006, LG Electronics U.S.A., Inc.

For service/

support Call:

Toll Free Number

11--880000--224433--00000000

2

This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.

WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.

CAUTION:

Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from over heating.
The openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.

CAUTION: CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCKS DEFEATED
AVOID EXPOSURE TO THE BEAM.

CAUTION:

This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service center.
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.

The main label is attached on the exterior of the bottom of
the apparatus.

CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a
dedicated circuit;

That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
certain.

Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
easily accessible.

FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this equipment
may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized
change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/
TV technician for help.

FCC COMPLIANCE: The responsible party for this product’s
compliance is:

LG Electronics U.S.A., Inc.,1000 Sylvan Avenue,
Englewood Cliffs, NJ.

Phone: [phone].

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL

.

3

Introduction

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following
procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and

operating instructions should be read before the
product is operated.

2. Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.

3. Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.

4. Follow all instructions. - All operating and use
instructions should be followed.

5. Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a
swimming pool; and other areas located near
water.

6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning.
Do not use liquid cleaners.

7.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -

Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from over­heating. The openings should never be blocked by
placing the product on a bed, sofa, rug or other
similar surface. This product should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is
provided or the manufacturer’s instructions have
been adhered to.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your
outlet, consult an electrician for replacement of
the obsolete outlet.

10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11. Only use attachments/accessories specified
by the manufacturer.

12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms
or when unused for long periods of time.

14.

Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.

4

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10

About the Symbol Display . . . . . . . . . . . . . . .5

Symbols Used in this Manual . . . . . . . . . . . . . . .5

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . .6

Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .6

Playing media files using the USB feature . . . . . .7

Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Active Subwoofer . . . . . . . . . . . . . . . . . . . . . . . .9

Remote Control . . . . . . . . . . . . . . . . . . . . . . . .10

Remote Control Operation . . . . . . . . . . . . . . . .10

Hookup and Settings . . . . . . . . . . . . . . . . . . . .11-17

Making system connections . . . . . . . . . . . . .11-12

HDMI connection . . . . . . . . . . . . . . . . . . . . . . .13

Using the Home Menu . . . . . . . . . . . . . . . . . . .14

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . .14

General Settings . . . . . . . . . . . . . . . . . . . . . . . .14

TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . .14

Display Mode . . . . . . . . . . . . . . . . . . . . . . .14

Initialization . . . . . . . . . . . . . . . . . . . . . . . . .15

Language Settings . . . . . . . . . . . . . . . . . . . . . .15

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . .15

DRC (Dynamic Range Control) . . . . . . . . . .15

Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

HD AV Sync . . . . . . . . . . . . . . . . . . . . . . . .15

2.1 Speaker Setup . . . . . . . . . . . . . . . . . . .15

Lock (Parental Control) Settings . . . . . . . . . . . .16

Set Password / Rating / Area Code . . . . . . .16

DivX Registration Code . . . . . . . . . . . . . . .16

Displaying Disc Information on-screen . . . . . . .17

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-26

General Playback Features . . . . . . . . . . . . .18-20

Playing a DivX Movie File . . . . . . . . . . . . . . . . .21

Playing an Audio CD or MP3/WMA file . . . . . . .22

Program Playback with Audio CD and

MP3/WMA file . . . . . . . . . . . . . . . . . . . . . . . . . .23

Viewing a JPEG File . . . . . . . . . . . . . . . . . .24-25

AUX/MOBILE/OPTICAL (Listening to

an external source) . . . . . . . . . . . . . . . . . . . . . .26

Using Apple iPod . . . . . . . . . . . . . . . . . . . . . . .26

Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-33

Additional Information . . . . . . . . . . . . . . . . . . . .27

Presetting the Radio Stations . . . . . . . . . . .27

Listening to the Radio . . . . . . . . . . . . . . . . .27

XM Satellite Radio Operation . . . . . . . . .28-29

Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Virtual sound . . . . . . . . . . . . . . . . . . . . . . . .30

Controlling Your TV with the Supplied Remote

Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Language Codes . . . . . . . . . . . . . . . . . . . . . . .31

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .32

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .33

Warranty . . . . . . . . . . . . . . . . . . . . . . .Rear cover

Copyright

 Recording equipment should be used only for lawful

copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.

 This product incorporates copyright protection

technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.

 CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE.
IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p UNIT,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.

5

Introduction

To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.

This manual provides information on the operation
and maintenance of your player. Should the unit
require service, contact an authorized service location.

About the Symbol Display

“ ” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
media.

Symbols Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols
are applicable only to the disc represented by the
symbol.

All discs and file listed below
DVD and finalized DVD±R/RW
Audio CDs
DivX files
MP3 files
WMA files
JPEG files

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.

Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.

Moisture Condensation

Never operate this product immediately after moving it
from a cold location to a warm location. Leave it for
two or three hours without operating it. If you use this
product in such a situation, it may damage discs and
internal parts.

JPEG

WMA

MP3

DivX

ACD

DVD

ALL

Introduction

Manufactured under licence from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.

“DTS” and “DTS 2.0” are trademarks of Digital Theater
Systems, Inc.

6

Playable Discs

DVD (8 cm / 12 cm disc)

 Discs such as movies that can be purchased or rented

Audio CD (8 cm / 12 cm disc)

 Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased

CD-R/CD-RW (8 cm / 12 cm disc)

 CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files.

Notes:



Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.



Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.



Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.



Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.



DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Unit may
not play if the disc is damaged or dirty, or if there is dirt or condensation on the Unit’s lens.



If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases
in which it may not play because of the settings of the application software used to create the disc. (Check
with the software publisher for more detailed information.)



This unit requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre­existing conditions (see above) to ensure compatible playback.



Customers should note that permission is required in order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright owner.

Regional Code

This unit has a regional code printed on the bottom of the unit. This unit can play only DVD discs labeled same
as the bottom of the unit or “ALL”.

Notes on Regional Codes



Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must
match your unit’s regional code or the disc cannot play.



If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code.
Can’t play back” appears on the TV screen.

7

Introduction

Playing media files using the
USB feature

You can enjoy the media files such as pictures
(JPEG), movies (DivX) and tunes (MP3/WMA) saved
in an MP3 player or USB memory by connecting the
storage device to the USB port of this unit.

1. Connect the USB device to the USB port of the
unit.

2. Press HOME on the remote control.

3. Select [MUSIC], [PHOTO] or [MOVIE] option.
Details for the options are on page 14.

Compatible Devices

1. Devices which require additional program
installation when you have connected it to a
computer, are not supported.

2. MP3 Player: Flash type MP3 player.

•

The MP3 player requiring installation of a driver

is not supported.

3. USB Flash Drive: Devices that support USB2.0 or
USB1.1.

Notes:



Do not extract the USB device in operating (play,
copy, move, etc.).



A back up demands to prevent a data damage.



If you use a USB extension cable or USB hub, the
USB device might not be recognized.



This unit can support USB 2.0 or USB 1.1.



A device using NTFS file system is not supported.
(Only FAT (16/32) file system is supported.)



The USB function of this unit does not support all
USB devices.



Digital camera and mobile phone are not supported.



This unit is not supported when the total number of
files is 1000 or more.

8

Main Unit

a HDMI Connector (Type A)

HDMI output providing a high quality interface for
digital audio and video.

b SYSTEM Connector

Connect the main unit to the active subwoofer.

c Display window

d * Touch pad

You can point to, select, and scroll objects on the
display window.
You can also change the volume by moving your
finger around the touch wheel.

e PHONES

3.5 mm headphone jack.

Tips:



Adjust the volume to a moderate level before
you plug in the headphones.



Connecting headphones will switch off the
speakers.

f USB

Connect to a USB port of multimedia (USB
memory etc.)

g11/I

Switches the unit ON or OFF.

h Remote Sensor

Point the unit remote control here.

i HOME

Accesses or removes the HOME menu.

j PLAY

Starts playback

k STOP

Stops playback or recording.

l PAUSE

Pauses playback temporarily.

m CD slot loader

Notes:

 Do not push a disc forcibly into the CD slot.
 Do not pull or push a disc while a disc is ejected.
 Press EJECT again to reinsert the disc after

ejecting it.

n EJECT

Ejects or inserts a disc from the slot loader.

a

g m

c d

nhibjkl

e
f

9

Introduction

p

MOBILE

SYSTEM(DVDP)

v w

o

u

y

x

q r s t

o AC Power Cord

Plug into the power source.

p AUX IN

Connect an auxiliary audio input source.

q OPTICAL IN

Connect an optical output of digital device.

r VIDEO OUT

Connect to a Video Input on TV.

s SYSTEM (DVDP)

Connect the active subwoofer to the main unit.

t MOBILE

Connect an external device (e.g. Portable audio
devices)

u FRONT SPEAKER (4Ω)

A speaker system can be connected to this
terminal.

v COMPONENT VIDEO OUT (Y Pb Pr)

Connect to a TV with Y Pb Pr inputs.

w XM IN

Connect an XM Passport System to this
terminal.(sold separately)

x FM ANTENNA

Connect the FM antenna to this terminal.

y AM ANTENNA

Connect the AM antenna to this terminal.

Active Subwoofer

* Touch pad

Action

Description

This unit has touch sensitive controls that respond to the touch of your fingers.

Notes:

 Do not place objects on the top panel of the main unit.
 Do not touch the touch pad hard to make it work.
 Slowly and lightly touch the touch pad.
 Touch the touch pad with bare hands and do not touch the touch pad with wet hands.

Move your finger around
the touch wheel

Tap ENTER

Tap , , , or

Select a menu item Move up, down, left, or

right

Adjust the volume

Function

10

     a    

TUNER: Selects an FM, AM or XM
broadcast.

USB: Selects an USB mode.
MOBILE: Selects a MOBILE

mode.
POWER: Switches the unit ON or

OFF.

DIMMER: Press to change
brightness of the display window
on the top panel during power-on
status.

EJECT: Ejects or inserts disc from
the slot loader.

DISC: Selects a DISC mode.
SLEEP: Set the system to turn off

automatically at a specified time.

     b    

REPEAT: Repeat chapter, track,
title or all.

A-B: Repeats sequence between
two points (A and B)

MARKER: Marks any point during
playback.

SEARCH: Displays Marker Search
menu.

TITLE: Displays the disc’s Title
menu, if available.

ZOOM: Enlarges video image.
AUDIO: Selects an audio

language or audio channel.
Selects STEREO or MONO
(Radio).

SUBTITLE: Selects a subtitle
language.

     c    

x (STOP): Stops playback.
B (PLAY): Starts playback.
X (PAUSE) : Pauses playback

temporarily.
PROG./CLEAR: Accesses or

removes program menu.
Stores a radio station’s frequency
in the tuner’s memory.

m / M (SCAN): Search
backward or forward.

. / > (SKIP): Go to next or
previous chapter or track.

     d    

DISPLAY: Accesses On-Screen
Display.

MENU/LIST: Accesses menu on a
DVD disc.

HOME: Accesses or removes the
HOME menu.

SETUP: Accesses or removes
Setup menu.

RETURN (O): Removes the
menu.

PRESET(+/-): Select programme
of Radio.

XM CH/TUN.(+/-): Tunes in the
desired radio station.

b / B / v / V (left/right/up/down):

Selects an option in the menu.
ENTER: Confirms menu

selections.

VSM: Selects the virtual sound.
XTS Pro: To enjoy more natural

and realistic sound.
CLEAR: Removes a mark on the

Marker Search menu.
MUTE: Turns the sound on and off

temporarily.
VOLUME (+/-): Adjusts speaker

volume.

     e    

0-9 numerical buttons: Selects
numbered options in a menu.

CAT: Select the Category Search.

XM MODE/RESOL.: Selects a XM

display mode. Sets the output
resolution for HDMI.

     f    

TV Control Buttons: See page

30.

XM MODE/RESOL.

CAT

Remote Control

a

b

c

d

e

f

Remote Control Operation

Point the Remote Control at the remote sensor and
press the buttons.

Remote Control Battery Installation

Remove the battery cover on the
rear of the Remote Control, and
insert two (size AA) batteries with

and matched correctly.

Caution

Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).

11

Hookup and

Settings

Hookup and Settings

Making system connections

Caution

Do not plug the active subwoofer into an AC
power(mains) outlet until all the components are
connected.

Connecting the active subwoofer to the unit

Connect one end of the system cable (S1) into the
SYSTEM jack on the rear of the unit. Connect the
other end of the system cable (S1) into the SYSTEM
(DVDP) jack on the rear of the active subwoofer.
Tighten both screws on the connector.

Note:

The jacks for the system cable are keyed so that the
cable connectors only connect in one way.

Connecting the speakers to the active
subwoofer

1. Connect one end of the speaker cable (S2) into
the FRONT SPEAKER (4Ω) jack on the rear of the
active subwoofer. Tighten both screws on the
connector.

2. Connect the L (left) speaker cable (S2) into the
rear jack of the left speaker. Connect the R (right)
speaker cable (S2) into the rear jack of the right
speaker.

Note:

Make sure cable connectors are fully inserted and
seated firmly in the speaker jacks.

Connecting the supplied antennas

The rear of the active subwoofer provides jacks for
the AM and FM antennas included with your system.

Note:

An outdoor antenna may be used in place of the
supplied indoor antennas. To add an outdoor antenna,
consult a qualified installer.
Follow all safety instructions supplied with the
antenna.

FM antenna

Connect the FM antenna into the FM jack on the rear
of the active subwoofer. Spread out the antenna arms
and move them around to establish optimum FM
reception. Extend the antenna as far from the unit and
other equipment as possible.

AM antenna

Connect the AM loop antenna into the AM jack on the
rear of the active subwoofer. Place the antenna loop
away from the unit and other equipment as
possible.Stand it on the supplied base or mount it to a
wall.

Rear of active
subwoofer

Rear of unit

MOBILESYSTEM(DVDP)

RL

S1

Rear of the active subwoofer

RL

MOBILESYSTEM(DVDP)

S2

R (right) speaker

R (right)
speaker

cable

L (left)
speaker
cable

L (left) speaker

S2

Rear of active
subwoofer

FM Wire antenna

(supplied)

AM Loop Antenna

(supplied)

RL

MOBILESYSTEM(DVDP)

12

Connecting Your TV to the active subwoofer

Video connection

Connect the VIDEO OUT jack on the rear of the active
subwoofer into the video input jack on your TV using
the video cable (V).

Component video connection

Connect the COMPONENT VIDEO OUT jacks on the
rear of the active subwoofer into the corresponding
input jacks on your TV using a component video cable
(C). If your television is a high-definition or “digital
ready” television, you may take advantage of the
unit’s progressive scan output for the highest video
resolution possible. If your TV does not accept the
progressive scan format, the picture will appear
scrambled if you try progressive scan on the unit.
Set the resolution to 480P using XM MODE/RESOL.
button for progressive signal.

Note:

Progressive scan does not work with the analog video
connection (yellow VIDEO OUT jack).

Optical digital connection

Connect an optical output of digital device into the
OPTICAL IN jack on the rear of the active subwoofer
using optical cable (O).

Caution

When you use HDMI connection, the VIDEO OUT
connection are not available.

Connecting an additional device

There are two options for connecting an additional
device to the unit.

 Option A: AUX IN (L/R) jacks (e.g. VCR, Laser disc

player)

 Option B: MOBILE jack (e.g. Portable audio

devices)

Option A: AUX IN (L/R) jacks

1. Connect the red plug of the red/white audio cables
to the red jack AUX IN R and white plug to the
white jack AUX IN L.

2. Connect the other end of the audio cables to audio
output jacks of the additional device.

Note:

If the connected device has only a single audio output
jack, connect it to the AUX IN L jack.

Option B: MOBILE jack

1. Connect one end of an audio cable (M) with a 3.5
millimeter stereo miniplug into the MOBILE jack on
the rear of the active subwoofer.

2. Connect the other end of an audio cable (M) with a

3.5 millimeter stereo miniplug into the headphone
jack (or line out jack) of the additional appliance.

Digital Device

Rear of active
subwoofer

Rear of TV

OPTICAL

OUT

Portable audio

devices

Headphones or

Line out jack

RL

MOBILESYSTEM(DVDP)

C V

O M

13

Hookup and

Settings

HDMI connection

If you have a HDMI TV or monitor, you can connect it
to this unit using a HDMI cable.

1. Connect the HDMI jack on the unit to the HDMI
jack on a HDMI compatible TV or monitor (H).

2. Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).

Notes:

 The arrow on the cable connector body should face

up for correct alignment with the connector on the
unit.

 If there is noise or lines on the screen, please check

the HDMI cable.

 If you press XM MODE/RESOL. in tuner (RADIO)

mode, the resolution is not changed.

Tip :

When you use HDMI connection, you can change the
resolution (480p, 720p, or 1080i) for the HDMI output
using XM MODE/RESOL. button.

Caution

Changing the resolution when the unit is connected
with HDMI connector may result in malfunctions.
To solve the problem, turn off the unit and then turn it
on again.

About HDMI

HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.

HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5
gigabytes per second, one connector (instead of several
cables and connectors), and communication between the
AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.

Additional Information for HDMI

 When you connect a HDMI or DVI compatible

device make sure of the followings:

-Try switching off the HDMI/DVI device and this
unit. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on
this unit.

- The connected device’s video input is set
correctly for this unit.

- The connected device is compatible with
720x480p, 1280x720p, or 1920x1080i video input.

 Not all HDCP-compatible DVI devices will work with

this unit.

- The picture will not be displayed properly with
non-HDCP device.

- When the connected TV cannot accept the
resolution you selected, you may not see normal
picture on the TV screen.

HDMI

HDMI compatible TV

Rear of the unit

H

(Type A)

14

Using the Home Menu

From the Home Menu screen you can access all the
Media for playback and recording of the unit.

1. Press HOME to display the Home Menu screen.

2. Use the b / B buttons to select a main option you

want. Sub options appears.

3. Use the v / V and ENTER buttons to select the

sub option you want.

4. To exit the HOME menu, press HOME.

MOVIE



DISC:

- Displays [Movie List] menu for DivX disc.
(See page 21)

- Plays back DVD-Video disc.
(See page 18-20)



USB DivX: Displays the [Movie List] for USB

device. (See page 21)

PHOTO (See page 24-25)



DISC: Displays [Photo List] menu for disc.



USB: Displays the [Photo List] for USB device.

SETUP (See page 14)



Start: Displays Setup menu.

Easy Menu



AUX: Selects an auxiliary mode. (See page 26)



OPTICAL: Selects OPTICAL mode. (See page 26)

RADIO



Listen: Selects a Radio mode.

MUSIC (See page 22-23)



DISC: Displays [Music List] (or Audio CD) menu for
disc.



USB: Displays the [Music List] for USB device.

Initial Settings

In this menu system, there are several ways to
customize the settings provided. Most menus consist
of three levels to set up the options, but some require
greater depth for the variety of settings.

General Operation

1. Press SETUP or select SETUP from the Home
Menu screen and the Setup menu appears.

2. Use v / V to select the desired option.

3. While the desired item is selected, press B to
move to the second level.

4. Use v / V to select the second desired option.

5. Press B to move to the third level.

6. Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.

7. Press SETUP or RETURN (O) repeatedly to exit
the Setup menu.

Note:

Press b to go back to the previous level.

General Settings

TV Aspect

Selects the aspect ratio of the connected TV (4:3
standard or wide).

 [4:3] Select this when connecting to a 4:3 screen

TV. When you select [4:3], set [Display Mode]
below.

 [16:9] Select this when connecting to a wide-screen

TV or TV with a wide mode function.

Display Mode

Selects how to display a wide picture on the screen
when [4:3] is selected in [TV Aspect].

 [Letter Box] Displays a wide picture with bands on

the upper and lower portions of the screen.

 [Pan Scan] Automatically displays a wide picture on

the entire screen and cuts off the portions that do
not fit.

Note:

When you set the resolution to 720p or 1080i, TV
Aspect and Display Mode are disabled.

15

Hookup and

Settings

Initialization

You can reset the unit to its original factory settings.

[Factory Set] If you need to, you can reset the unit to
all its factory settings. Some options cannot be reset.
(Rating, Password, and Area Code)

1. Select [Initialization] option then press B.

2. Press v / V to select the desired option then press

ENTER.
The confirm message will appear.

3. Use b / B to select [Ok] or [Cancel] then press

ENTER.

Language Settings

Display Menu

Select a language for the Setup menu and on-screen
display.

Disc Menu/Audio/Subtitle

 [Original]Refers to the original language in which

the disc was recorded.

 [Others] To select another language, press number

buttons then ENTER to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 31). If you enter
the wrong language code, press b.

 [OFF](for Disc Subtitle) : Turn off Subtitle.

Audio Settings

DRC (Dynamic Range Control)

With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to [ON] for
this effect.

Vocal

Set Vocal to [ON] only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.

HD AV Sync

When using Digital TV sometimes the AV signal
cannot be transmitted simultaneously because of later
transmission of video signal compared to audio signal.

It takes some time to convert an analog video signal
to a digital video signal in the Digital TV.

It also means that you may not enjoy picture on the
screen and sound from the speakers at the same time
even though it is one scene.

In the HD AV Sync menu, you can adjust delay time to
audio signal for simultaneous AV signal transmission

 Delay time could be set up with 10m sec. unit.

(0 ~ 300msec)

 Delay time is different with each TV Brand. So you

need to adjust optimal delay time complying with
your TV.

2.1 Speaker Setup

Make the following settings for the built-in 2.1 channel
surround decoder.

1. Select [2.1 Speaker Setup] option then press B.

2. Press B to select a speaker that you want to

adjust.
(L: Left speaker/R: Right speaker/W: Active subwoofer)

3. Press v / V to adjust the output level of the

selected speaker.

4. Press ENTER to store the setting.

16

Lock (Parental Control) Settings

Set Password

1. Select [Set Password] option then press B.

2. To access the Rating, Password and Area Code
features, you must input the 4-digit password you
created.
If you have not yet entered a password you are
prompted to do so. Input a 4-digit password and
press ENTER. Enter it again and press ENTER to
verify. If you make a mistake before pressing
ENTER, press b.
To change the password, select the [Change],
press ENTER and input the old 4-digit password
then press ENTER. Input the new 4-digit password
then press ENTER. Input it again to verify then
press ENTER.

To delete the password, select [Delete] then press
ENTER.
Input the 4-digit password you created and press
ENTER.

If you forget your 4-digit password

If you forget your password, to clear the current
password, follow the procedure below.

1. Display Setup menu then select an 1 level icon.

2. Use the Number buttons to enter the 6-digit

number “210499”.

3. Select [OK] then press ENTER. The 4-digit

password is cleared. Enter a new password.

Rating

Blocks playback of rated DVDs based on their
content. Not all discs are rated.

1. Select [Rating] option then press B.

2. Follow step 2 as shown “Set Password”.

3. Select a rating using the v / V buttons.
[1] - [8]: Rating one (1) has the most restrictions

and rating eight (8) is the least restrictive.

[No Limit]: If you select [No Limit], parental control
is not active and the disc plays in full.

4. Press ENTER to confirm your rating selection.

Note:

If you set a rating for the unit, all disc scenes with the
same rating or lower are played. Higher rated scenes
are not played unless an alternate scene is available
on the disc. The alternative must have the same rating
or a lower one. If no suitable alternative is found,
playback stops. You must enter the 4-digit password
or change the rating level in order to play the disc.

Area Code

Enter the code of an area whose standards were used
to rate the DVD video disc, referring to the list (See
“Area Codes”, page 31.).

1. Select [Area Code] option then press B.

2. Follow step 2 as shown “Set Password”.

3. Select the first character using the v / V

buttons.

4. Shift the cursor using B buttons and select the
second character using v / V buttons.

5. Press ENTER to confirm your area code selection.

DivX Registration Code

We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
information, visit www.divx.com/vod.

1. Select [DivX(R) VOD] option then press B.

2. Press ENTER and the registration code will
appear.

3. Use the registration code to purchase or rent the
videos from Divx® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.

Note:

All the downloaded videos from DivX® VOD can only
be played back on this unit.

17

Hookup and

Settings

Displaying Disc Information
on-screen

You can display various information about the disc
loaded on-screen.

1. Press DISPLAY to show various playback
information.
The items displayed differ depending on the disc
type or playing status.

2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
For details about each item, see the pages in
parentheses.



[Title]: Current title (or track) number/total
number of titles (or tracks)



[Chapter]: Current chapter number/total number
of chapters.



[Time]: Elapsed playing time (See page 20)



[Audio]: Selected audio language (DVD VIDEO
only) or audio channel (See page 19)



[Subtitle]: Selected subtitle (See page 19)



[Angle]: Selected angle/total number of angles
(See page 20)



[Sound]: Selected sound mode (See page 20)

Note:

If no button is pressed for 10 seconds, the on-screen
display disappears.

18

Playback

General Playback Features

1. Insert your chosen disc into CD loader, with the playback side down.

2. Starts playback using HOME menu (see page 14).

3. To stop the playback, press x (STOP).
The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly.
Press B (PLAY) to resume playback (from the scene point). If you press x (STOP) again or eject the disc
(“x” appears on the screen.), the unit will clear the stopped point.

4. Press EJECT to remove the disc.

Note:

If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see “Rating”, on page 16).

Buttons Operations

EJECT Ejects or inserts a disc.
X (PAUSE) During playback, press X to pause playback.

Press X repeatedly to play Frame-by-Frame.

. / > (SKIP) During playback, press . or > to return to the

beginning of the current chapter/track or to go to the next
chapter/track.
Press . twice briefly to step back to the previous
chapter/track.

Tips:



To go directly to any chapter during DVD playback, press
DISPLAY and press v / V to select the chapter icon.
Then, input the chapter number or use b / B.



On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.

m / M (SCAN) During playback, press m or M repeatedly to select the

required scan speed.
DVD, DivX: 4 steps
Audio CD: 3 steps

While the playback is paused, press m or M repeatedly
to play in slow motion.
DVD: 4 steps
DivX: 4 steps (Forward only)

ZOOM During playback or pause mode, press ZOOM to enlarge

the video image.
(x1 size → x2 size → x4 size → x1 size (normal size)
You can move through the zoomed picture using bBvV
buttons.

Discs

DVD

DivXDVD

ACDDivXDVD

ALL

DivXDVD

ALL

ALL

19

Playback

General Playback Features (Continued)

Buttons Operations

REPEAT During playback, press REPEAT repeatedly to select a

desired repeat mode.
DVD (Title/Chapter/Off)
DivX (Title/ALL/Off)
Audio CD, MP3/WMA (TRACK/ALL/(OFF))

Note:

If you press > once during Repeat Chapter (Track)
playback, the repeat playback cancels.

A-B During playback, each press of A-B button to select point A

and point B and repeats a sequence from point A (Starting
point) to point B (End point).

TITLE If the current DVD title has a menu, the title menu appears

on the screen. Otherwise, the disc menu may appears.

MENU/LIST The disc menu appears on the screen.

SUBTITLE ( ) During playback, press SUBTITLE ( ) then press b / B

repeatedly to select a desired subtitle language.

AUDIO ( ) Press AUDIO ( ) then press b / B repeatedly to hear a

different audio language or audio track.

Discs

DivXDVD

DivXDVD

DVD

DVD

DivXWMA

MP3ACDDVD

DivXWMA

MP3ACDDVD

20

If a menu screen is displayed

The menu screen may be displayed first after loading a
DVD which contains a menu.

Use the b / B / v / V buttons to select the
title/chapter you want to view, then press ENTER to
start playback.
Press TITLE or MENU/LIST to return to the menu
screen.

Moving to another TITLE

When a disc has more than one title, you can move to
another title as follows:



Press DISPLAY during playback then use
v / V to select the title icon. Then, press the
appropriate numbered button (0-9) or b / B to

select a title number.

Time Search

To start playing at any chosen time on the disc:

1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.

2. Press v / V to select the time icon and “--:--:--”
appears.

3. Input the required start time in hours, minutes, and
seconds from left to right.

4. Press ENTER to confirm. Playback starts from the
selected time.

Marker Search

To enter a Marker

You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc during playback. The Marker
icon appears on the TV screen briefly. Repeat to enter
up to nine markers.

To Recall or Clear a Marked Scene

1. During disc playback, press SEARCH. The marker
search menu appears on the screen.

2. Within 5 seconds, press b / B to select a marker
number that you want to recall or clear.

3. Press ENTER and playback starts from the
marked scene. Or, press CLEAR and the marker
number is erased from the list.

Camera Angle

If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.

1. Press DISPLAY during playback.
The On-Screen Display appears on the TV screen.

2. Use v / V to select the Angle icon in the On­Screen Display.

3. Use b / B to select a desired angle.
The number of the current angle appears on the
TV screen.

Virtual Surround

This unit can produce a Virtual Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi­channel audio from a home theater system.

1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.

2. Use v / V to select the Sound icon in the
On-Screen Display.

3. Use b / B to select “VIRTUAL”.
To turn off the 3D Surround effect, select “Normal”.

You can also set the Virtual Surround by pressing
VSM repeatedly.

Last Condition Memory

This unit memorizes the user settings for the last disc
that you have viewed. Settings remain in memory
even if you remove the disc from the unit. If you load
a disc that had its settings memorized, the latest stop
position is automatically recalled.

Note:

Settings are stored in memory for use any time.

DVD

DivXDVD

DVD

DivXDVD

DivXDVD

DivXDVD

DVD

21

Playback

Playing a DivX Movie File

The unit can play Divx files. Before playing DivX files,
read “DivX file requirement” on right.

1. Press HOME then select [MOVIE] option.

2. Select a media that contains DivX file(s) then
press ENTER.
The [Movie List] menu appears on the TV screen.

3. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the

v / V buttons on the remote to highlight and
press ENTER.

4. If you want to view a divx movie file, press v / V
to highlight a file and press B (PLAY).
You can use variable playback functions.
Refer to pages 18-20.

5. Press x (STOP) to stop the playback. The [Movie
List] menu appears.

Notice for displaying the DivX subtitle

If the subtitle does not display properly, please follow
the steps below.

1. Press X when the subtitle appears.

2. Press and hold SUBTITLE about 5 seconds.
The language code will appear.

3. Press SUBTITLE to select another language code
until the subtitle is displayed properly.

4. Press B (PLAY) to continue playback.

Movie List menu options

1. Press v / V to select a folder/file on the [Movie

List] menu then press ENTER.
[Movie List] menu options appear.
The menu options displayed differ depending on
the selected media.

2. Press v / V / b / B to select an option, and press

ENTER.

 [Play] Start playback of the selected title.
 [Open] Opens the folder and a list of files in the

folder appears.

DivX file requirement

Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”, “.ssa”,

“.sub (Micro DVD format)”,
“.txt (Micro DVD format)”

Playable Codec format: “DIV3”, “DIVX”, “DX40”,
“DX50”, “3ivx”, “MP4V2”, “MP4V3”

Playable Audio format: “AC3”, “PCM”, “MP3”,
“DTS”

 Sampling frequency:

within 16 - 48 kHz (MP3)

 Bit rate:

within 32 - 320kbps (MP3)

CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 999 (total number

of files and folders)

Notes on DivX format

 If the number of the screen frame is over 29.97

frames per second, this unit may not operate
normally.

 If the video and audio structure of recorded file is

not interleaved, returns to the menu screen.

22

Playing an Audio CD or
MP3/WMA file

The unit can play audio CDs and MP3/WMA files.
Before playing MP3/WMA files, read “MP3/WMA audio
file requirement” on right.

1. Press HOME.
The HOME menu appears.

2. Select [MUSIC] option.

3. Select a media that contains MP3/WMA or audio
title then press ENTER.
The [Music List] menu appears on the TV screen.

4. Use v/V to select a track then press B (PLAY).
Playback starts.
You can use variable playback functions.
Refer to pages 18-19.

Tips:

 If you want to move to the upper directory, use

the v / V to highlight and press ENTER.

 Press and hold v to move to the previous

page.
Press and hold V to move to the next page.

5. To stop playback at any time, press STOP.

Audio CD and Music menu options

1. Press v / V to select a folder/file on the Audio CD

or Music menu then press ENTER.
The menu options appear.
The menu options displayed differ depending on
the selected media.

2. Press v / V / b / B to select an option, and press

ENTER.

 [Play] Start playback the selected title.
 [Random] Start or cancel random playback.
 [Open] Opens the folder and a list of files in the

folder appears.

 [Prog. add] Adds the track(s) to Program list.

Random

1. Press v / V to select a file then press ENTER.

The menu options appear.

2. Press v / V to select [Random] option then press

ENTER.
The unit automatically begins random playback
and “RANDOM” appears on the menu screen.

3. To return to normal playback, select [Random]
option again then press ENTER.

Tip:

By pressing > during Random playback, the unit
selects another track and resumes Random playback.

MP3/WMA audio file requirement

File extensions

“.mp3”, “.wma (v2, v4, v7, v8 available)”.

Sampling frequency:

within 16 - 48 kHz (MP3), within 8 - 48kHz (WMA)

Bit rate:

within 32 - 320kbps (MP3), 5 - 192kbps (WMA)

CD-R Format:

ISO 9660 and JOLIET.

DVD±R/RW Format:

ISO 9660 (UDF Bridge format)

Maximum Files/Disc:

Less than 999 (total number of files and folders)

23

Playback

Program Playback with Audio
CD and MP3/WMA file

Program Playback enables you to make custom
playlists of Audio CD or MP3/WMA tracks. Programs
can contain up to 99 Audio CD tracks or 256
MP3/WMA files.

1. Use v / V to select a track/file (or folder) on the

Audio CD or Music menu.

Selecting multiple files/tracks (folders)

1. Press MARKER.
A check mark appears on the file/track or
folder. Press MARKER again to cancel the
marked file/track or folder.

2. Repeat step 1 to mark additional file/track
(folders).

2. Press ENTER.
The options appear on the left side of the menu.

3. Use v / V to select the [Prog. add] option then
press ENTER.

4. Repeat steps 1-3 to mark additional tracks.

Note:

If you select a folder for Programmed Playback, all
tracks/files in the folder are added to the Program List.

5. Use B to move to the Program list.
The programmed track you selected last is
highlighted on the Program list.

6. Use v / V to select the track you want to start
playing.

7. Press B (PLAY) to start.
Playback stops after playing the last programmed
track in the Program list.

8. To exit Program Playback and resume normal
playback, select a track on the original list by
pressing b and v / V and press B (PLAY).

Tips:

 You can access or remove the Program list screen

by pressing MENU/LIST.

 You can not remove the Program list screen during

the programmed playback and the programmed

Xxx.

Program list menu options

1. Press v / V to select a track/file on the Program

list then press ENTER.
The menu options appear.

2. Use v / V to select an option then press ENTER

to confirm your selection.

 [Play] Playback begins in the order in which you

programmed the tracks from the selected track.

 [Random] Start or cancel random playback.

 [Delete] Deletes the track(s) from the Program

list menu.

Repeat Programmed Tracks

Press REPEAT to select the desired Repeat mode.

 [TRACK] Repeats the current track.
 [ALL] Repeats all tracks on the Program List.
 [OFF] Cancels Repeat mode (no display).

Erasing a Track from the Program list

1. Select the track you wish to erase from the
Program list. Use MARKER button to select
multiple tracks.

2. Press ENTER. The menu options appears

3. Select [Delete] option then press ENTER.

24

Viewing a JPEG File

This unit can play JPEG files. Before playing JPEG
recordings, read “Photo file requirement” on right.

1. Press HOME.
The HOME menu appears.

2. Select [PHOTO] option.

3. Select a media that contains JPEG file then press
ENTER.
The [Photo List] menu appears on the TV screen.

4. Use v / V to select a file, then press ENTER.
The menu options appear on the left side of the
menu.

Tips:

 If you want to move to the upper directory, use the

v / V to highlight and press ENTER.

 You can also display HOME menu to select another

media by pressing HOME.

5. Use v / V to select [Full Screen] then press
ENTER.
The selected image is displayed in full screen.
Depending upon the size and number of JPEG
files, it could take a long time for the unit to read
the files.

6. To stop viewing at any time, press STOP.
The [Photo List] menu appears.

Photo List menu options

1. Press v / V to select a file on the [Photo List]

menu then press ENTER.
The menu options appear.
The menu options displayed differ depending on
the selected media.

Selecting multiple files (folders)

1. Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or folder.

2. Repeat step 1 to mark additional file (folders).

2. Use v / V to select an option then press ENTER

to confirm your selection.

 [Open] Opens the folder and a list of files in the

folder appears

 [Full Screen] Shows the selected file as full

screen.

 [Slide Show] Displays Slide Show menu.

Press ENTER to appear or disappear this menu
during viewing the full screen.

Photo file requirement

File extensions

“.jpg”

Photo size:

Less than 4MB recommended

CD-R Format:

ISO 9660 and JOLIET.

DVD±R/RW Format:

ISO 9660 (UDF Bridge format)

Maximum Files/Disc:

Less than 999 (total number of files and folders)

Notes on JPEG file

Progressive and lossless compression JPEG image
files are not supported.

25

Playback

Skip Images

While viewing a picture, press . or > once to
return to the previous file or advance to the next file.

Rotate Images

Use v / V while viewing a picture to flip the picture
counterclockwise or clockwise.

View Slide Shows

Slide show will automatically go to next picture at a
specified interval.

1. Select [Slide Show] option on the [Photo List]
menu.

2. Press ENTER.
The Slide Show menu appears.

3. Use b / B / v / V to set the options.
[Object] option:

 [Selected] Views slide show only selected files

with MARKER button. Use the MARKER button
to select multiple files.

 [All] Views slide show all files.

[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or
[Fast].

4. Select the [Start] option then press ENTER to start
the Slide Show.

5. Press STOP to stop the Slide Show and return to
the [Photo List] menu.

To Pause the Slide Show

1. Press X to pause slide show.

2. When you want to continue slide show, press
X or B (PLAY).

26

AUX/MOBILE/OPTICAL
(Listening to an external source)

You can listen to the sound of the connected external
device through your unit.

1. Check the external device has been properly
connected. (See Connecting an additional
appliance on page 12.)

2. Press MOBILE on the remote control to select
MOBILE mode. (If you are in any menu mode,
remove it completely by pressing RETURN or
HOME repeatedly.)

or

Press HOME and b or B to select Easy Menu,
and then select AUX or OPTICAL.

3. To avoid noise distortion, turn down the volume on
your external device.

4. Press PLAY on the connected device to start
playback.

5. To adjust the sound and volume, use the sound
controls on your external device and this unit.

Note:

In MOBILE mode, B (PLAY), X, . and >
buttons operate only on the connected Apple iPod
through an Apple iPod universal dock with a built-in
infrared (IR) receiver. To release the MOBILE mode,
press mode button (TUNER, DISC, USB) you want, or
press HOME.

Using Apple iPod

You can perform the basic operations of your iPod
using the supplied remote control with this unit.

Notes:

 You need an Apple iPod universal dock with a built-

in infrared (IR) receiver and an audio cable with a

3.5 millimeter stereo miniplug.

 It works with all iPod models that have a dock

connector.

 Depending on the type of iPod, you may need to

insert one of the dock adapters into the dock slot
before you station your iPod.

 Adjust the volume to a moderate level before you

connect your iPod and this unit.

1. Station your iPod in the dock.

2. Connect one end of an audio cable with a 3.5
millimeter stereo miniplug into the MOBILE jack on
the rear of the active subwoofer.

3. Connect the other end of an audio cable with a 3.5
millimeter stereo miniplug into the dock line out
jack.

4. Press MOBILE on the remote control to select
MOBILE mode.

5. Point the supplied remote control with this unit at
the front of the dock.

6. Press B (PLAY), X, . or > on the supplied
remote control with this unit to turn iPod on.

7. You can control play (B), pause (X) and skip
(./>).
You can turn iPod off by pressing and holding B
(PLAY) or X on the supplied remote control with
this unit.

27

Reference

Reference

Additional Information

Presetting the Radio Stations

You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.

1. Press TUNER on the remote control. (If you are in
any menu mode, remove it completely by pressing
RETURN or HOME repeatedly.)

or

On the home menu screen, select RADIO and
then press ENTER.

2. And then every time you press TUNER, FM and
AM (MW) changes alternately.

3. Press and hold TUN.- or TUN.+ on the remote
control for about three seconds until the frequency
indication starts to change, then release.

Scanning stops when the unit tunes in a station.

4. Press PROG./CLEAR on the remote control.

A preset number will flash in the display window.

5. Press PRESET + or PRESET - on the remote
control to select the preset number you want.

6. Press PROG./CLEAR on the remote control.

The station is stored.

7. Repeat steps 3 to 6 to store other stations.

To tune in a station with a weak signal

Press TUN.- or TUN.+ repeatedly in step 3 to tune in
the station manually.

To clear all the stored stations

Press and hold PROG./CLEAR for about five seconds
and “ERASE ALL” is appeared in the display window
and then press PROG./CLEAR again, the stations are
cleared.



If you have accidentally entered into the “ERASE
ALL” mode and you do not wish to clear the
memory, do not press any key. After a few seconds
“ERASE ALL” will go off by itself and change to
normal mode.

Note:

If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.

Listening to the Radio

Preset radio stations in the unit’s memory first (see
“Presetting the radio stations” on the left).

1. Press TUNER until AM (MW) or FM appears in the
display window.

The last received station is tuned in.

2. Press PRESET + or PRESET - repeatedly on the
remote control to select the preset station you
want.

Each time you press this button, the unit tunes in one
preset station at a time.

3. Adjust the volume by pressing VOL + or VOL- on
the remote control repeatedly.

To turn off the radio

Press POWER to turn the unit off or select another
function mode (MOBILE, DISC, USB).

To listen to non-preset radio stations



Use manual or automatic tuning.



For manual tuning, press TUN.- or TUN.+ on the
remote control repeatedly.



For automatic tuning, press and hold TUN.- or
TUN.+ on the remote control for about three
seconds on the remote control.

To select a preset radio station directly

You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the remote control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds).

For your reference



If an FM program is noisy

Press AUDIO repeatedly on the remote control so

that “STEREO” disappears in the display

window. There will be no stereo effect, but the
reception will improve. Press this button repeatedly

again to select “STEREO”.



To improve reception

Reorient the supplied antennas.

28

XM Satellite Radio Operation

What is XM Satellite Radio?

XM Radio is the satellite radio service with millions of
listeners across the U.S.
Broadcasting live daily. XM Radio offers 160 digital
radio channels offering music, news, sports, comedy,
talk, entertainment, traffic and weather reports, with
high quality digital sound.
XM service subscription sold separately. XM Passport
System required to receive XM service (sold
separately). Installation costs and other fees and
taxes, including a one-time activation fee may apply.
XM service only available in the 48 contiguous United
States. Residents in Canada please see information
about Canadian Satellite Radio at the following
webpage: (www.cdnsatrad.com). XM Connect-and­Play is a trademark of XM Satellite Radio Inc. ©2006
XM Satellite Radio Inc. All rights reserved.

What is XM Ready?

An audio system labeled “XM Ready” means that the
system with the addition of an XM Passport Antenna
has everything you need to play XM. Everything else
is built inside.

XM Satellite Radio connections

Connect the XM Digital Antenna to the XM passport
system on the unit.

Activating Your Service

A one-time activation fee is required to establish an
account and activate service with XM Satellite Radio.
Applicable activation changers will be added to your
first bill.

1. Before activating XM service, make sure your XM
equipment is tuned to the XM Preview Channel
(Channel 1).

2. Determine your eight-character XM Satellite Radio
ID number by referencing the label on your XM
Passport System packaging, rear cover, or by
selecting channel 0. The ID number will appear on
the display.

Note:

Carefully check your XM Satellite Radio ID. The letter
I, O, S, and F are not used

3. Activate your XM Satellite Radio service. Make
sure you have a major credit card and your XM
Satellite Radio ID number handy.

To activate via the internet: Visit
http://www.xmradio.com/activation

To activate via phone: Call 1-800-XM-RADIO (967-2346)
A one-time activation fee will apply.

Selecting the XM Satellite Radio

Press TUNER to select XM band.

XM information

When receiving the XM Satellite Radio containing, you
can see the information in the display window.

Press XM MODE to change XM display mode.

Channel Number → Channel Label →
Song Name/Artist Name → Signal Strength →
Channel Number → ...

•

Channel Number :
Display current XM Channel Number

Channel Number shows 3 seconds regardless its
display mode when channel is changed.

When user edits or change preset, it works on
channel number display mode

• Channel Label

Display name of current channel.

• Song Name & Artist Name

Display song name & artist name as scroll.

• Signal Strength

Signal Strength is showed by 3 bars with antenna
shape.

No Bar: No Signal.
One Bar: Weak Signal
Two Bar: Marginal Signal
Three Bar: Good Signal

MOBILE

SYSTEM(DVDP)

XM

XM passport system

29

Reference

Presetting the

XM Satellite Radio

Stations

You can preset 50 stations for XM. Before tuning,
make sure that you have turned down the volume.

1. Press TUNER to select XM band.

2. Use XM CH - or XM CH + on the Remote Control
to select the desired channel.

3. Press PROG./CLEAR on the Remote Control.

4. Press PRESET + or - on the Remote Control to
select the preset number you want.

5. Press PROG./CLEAR on the Remote Control
again.

The station is stored.

6. Repeat steps 2 to 5 to store other stations.

To clear all the stored stations

Press and hold PROG./CLEAR for about two seconds
and “ERASE XM” is shown in the display window and
then press PROG./CLEAR again, the stations are
cleared.



If you have accidentally entered into the "ERASE
XM" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"ERASE XM" display will go off by itself and change
to normal mode.

Channel Selection

Preset Search

Use PRESET + or - on the Remote Control repeatedly
to select the preset station you want.

Direct Tuning

1. Using Numeric button on Remote Control, select
channel number directly.

2. Press ENTER after more than one numeric key
input, system moves to new channel immediately.

Channel up/down

Use XM CH - or XM CH + repeatedly to select the
channel you want.

Category Search

1. Select the Category Search mode using the CAT
key on the Remote Control.
(CAT Icon Blinking in Category Search mode.)

2. PRESET + or - changes target of category for
search, XM CH - or XM CH + selects next channel
of selected category in category search mode.

Note:

Category type of current channel displays for 3
seconds when category key is inputted in not category
display mode

Category search mode is released below case.

• CAT is inputted in Category search mode.

• No input of PRESET +/-, XM CH - or XM CH + key

for 15 seconds.

Advisory Message

XM Passport System is not
connected

• Check the connection of XM

Passport System

XM Passport System does not
work properly

• Need service of XM Passport

System

XM Passport System is not
activated, or User does not have
authorization for specific channel

• Subscribe activation of XM

Passport System

Receiving signal is too weak

• XM Passport System to south

window for best reception

Selected channel is not
broadcasting currently.

• Check programming list, select

another channel.

XM Passport System is now
decoding channel.

• Wait completion of decoding

process

Selected channel is not available.

• Check programming list, select

another channel.

Channel label or Song name/Artist
name or Category name is not
available

ANTENNA

SVC ANT

UPDATING

NO SIGNAL

OFF AIR

LOADING

XM---

--------

----/----

--------

30

Sleep

You can set a certain period of time after which the
unit will switch to standby.

1. On the remote control, press SLEEP repeatedly to
select the desired time period options (in minutes):

 Display shows the selected option briefly and

returns to its previous status.

2. To view the time countdown to the standby mode,
press SLEEP again.

To deactivate the sleep timer, press SLEEP until
previous status is displayed.

or

Press POWER to switch the unit to standby (or

11

/I on the front of the unit).

Dimmer

This function will change the brightness of the display
window on the top panel during in power-on status.
Press DIMMER repeatedly.

XTS pro

Each time you press XTS pro the setting changes in
the following order.

XTS-P OFF ↔ XTS-P ON

 XTS-P ON

The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.

 XTS-P OFF

XTS-P mode tune off

Virtual sound

Press VSM to set the virtual sound.



3D STEREO

Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.



Virtual sound

A pending downmix technology converts 5.1
channel to 2 channel sound having directional
information of audio. And it makes a 2 channel or

2.1 channel feel 5.1 channel sound.

Controlling Your TV with the Supplied
Remote Control

You can control the sound level, input source, and
power switch of your LG/GoldStar TV with the
supplied remote.

1. While holding down TV POWER button,
press CHANNEL + or -.

2. Release TV POWER button.

You can control your TV using the buttons below.

By pressing You can

POWER Turn the TV on or off.
INPUT Switch the TV’s input source

between the TV and other input
sources.

CHANNEL +/– Scans up or down through

memorized channels.

VOLUME +/– Adjust the volume of the TV.

Note:

When you replace the batteries of the remote, you
may have reset the remote control.

XM MODE/RESOL.

CAT

TV Control
Buttons

Source Display Effect

2.1 ch. VIRTUAL ON 3D STEREO

5.1 ch VIRTUAL ON Virtual sound

31

Reference

Area Code

Afghanistan AF
Argentina AR
Australia AU
Austria AT
Belgium BE
Bhutan BT
Bolivia BO
Brazil BR
Cambodia KH
Canada CA
Chile CL
China CN
Colombia CO
Congo CG
Costa Rica CR
Croatia HR
Czech Republic CZ
Denmark DK
Ecuador EC
Egypt EG
El Salvador SV

Area Code

Ethiopia ET
Fiji FJ
Finland FI
France FR
Germany DE
Great Britain GB
Greece GR
Greenland GL

Heard and McDonald Islands

HM
Hungary HU
India IN
Indonesia ID
Israel IL
Italy IT
Jamaica JM
Japan JP
Kenya KE
Kuwait KW
Libya LY
Luxembourg LU

Area Code

Malaysia MY
Maldives MV
Mexico MX
Monaco MC
Mongolia MN
Morocco MA
Nepal NP
Netherlands NL
Netherlands Antilles AN
New Zealand NZ
Nigeria NG
Norway NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Philippines PH
Poland PL
Portugal PT
Romania RO
Russian Federation RU

Area Code

Saudi Arabia SA
Senegal SN
Singapore SG
Slovak Republic SK
Slovenia SI
South Africa ZA
South Korea KR
Spain ES
Sri Lanka LK
Sweden SE
Switzerland CH
Thailand TH
Turkey TR
Uganda UG
Ukraine UA
United States US
Uruguay UY
Uzbekistan UZ
Vietnam VN
Zimbabwe ZW

Area Codes

Choose an area code from this list.

Language Code

Abkhazian 6566
Afar 6565
Afrikaans 6570
Albanian 8381
Ameharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Aymara 6588
Azerbaijani 6590
Bashkir 6665
Basque 6985
Bengali; Bangla 6678
Bhutani 6890
Bihari 6672
Breton 6682
Bulgarian 6671
Burmese 7789
Byelorussian 6669
Cambodian 7577
Catalan 6765
Chinese 9072
Corsican 6779
Croatian 7282
Czech 6783
Danish 6865
Dutch 7876
English 6978
Esperanto 6979
Estonian 6984
Faroese 7079

Language Code

Fiji 7074
Finnish 7073
French 7082
Frisian 7089
Galician 7176
Georgian 7565
German 6869
Greek 6976
Greenlandic 7576
Guarani 7178
Gujarati 7185
Hausa 7265
Hebrew 7387
Hindi 7273
Hungarian 7285
Icelandic 7383
Indonesian 7378
Interlingua 7365
Irish 7165
Italian 7384
Japanese 7465
Javanese 7487
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kirghiz 7589
Korean 7579
Kurdish 7585
Laothian 7679
Latin 7665
Latvian, Lettish 7686

Language Code

Lingala 7678
Lithuanian 7684
Macedonian 7775
Malagasy 7771
Malay 7783
Malayalam 7776
Maltese 7784
Maori 7773
Marathi 7782
Moldavian 7779
Mongolian 7778
Nauru 7865
Nepali 7869
Norwegian 7879
Oriya 7982
Panjabi 8065
Pashto, Pushto 8083
Persian 7065
Polish 8076
Portuguese 8084
Quechua 8185
Rhaeto-Romance 8277
Rumanian 8279
Russian 8285
Samoan 8377
Sanskrit 8365
Scots Gaelic 7168
Serbian 8382
Serbo-Croatian 8372
Shona 8378
Sindhi 8368

Language Code

Singhalese 8373
Slovak 8375
Slovenian 8376
Somali 8379
Spanish 6983
Sudanese 8385
Swahili 8387
Swedish 8386
Tagalog 8476
Tajik 8471
Tamil 8465
Tatar 8484
Telugu 8469
Thai 8472
Tibetan 6679
Tigrinya 8473
Tonga 8479
Turkish 8482
Turkmen 8475
Twi 8487
Ukrainian 8575
Urdu 8582
Uzbek 8590
Vietnamese 8673
Volapük 8679
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddish 7473
Yoruba 8979
Zulu 9085

Language Codes

Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.

32

Symptom

No power.

No picture.

Sound cannot be heard
or is of poor quality.

The playback picture is
poor.

The unit does not start
playback.

Radio reception is poor

The remote control
does not work properly.

The display window is
dim, and the light on
the touch pad and the
active subwoofer are
turned off.

B (PLAY), X, . and
> buttons do not

operate.

Cause

 The power cord is disconnected.

 The TV is not set to receive unit

signal output.

 The video cable is not connected

securely.

 The connected TV power is turned off.

 The volume is minimized.

 The headphones are connected.

 The MUTE button is switched on.

 The disc is dirty.

 An unplayable disc is inserted.

 The disc is placed upside down.

 The disc is dirty.

 The Rating level is set.

 The signal is too weak.

 The remote control is not pointed at

the remote sensor of the unit.

 The remote control is too far from the

unit.

 There is an obstacle in the path of the

remote control and the unit.

 The batteries in the remote control

are exhausted.

 The dimmer function is activated.

 This unit is in MOBILE mode.

Solution

 Plug the power cord into the wall

outlet securely.



Select the appropriate video input mode
on the TV so the picture from the unit
appears on the TV screen.

 Connect the video cable securely.

 Turn on the TV.

 Adjust the volume.

 Disconnect the headphones.

 Switch off MUTE.

 Clean the disc.



Insert a playable disc. (Check the disc
type, color system, and regional code.)

 Place the disc with the playback side

down.

 Clean the disc.

 Cancel the Rating function or change

the rating level.

 Adjust the antenna or connect an

external antenna for better reception.

 Point the remote control at the remote

sensor of the unit.

 Operate the remote control within

7 m.

 Remove the obstacle.

 Replace the batteries with new ones.

 Switch off DIMMER.

 To release the MOBILE mode, press

mode button (TUNER, DISC, USB)
you want, or press HOME.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Resetting the unit

If you observe any of the following symptoms...



The unit is plugged in, but the power will not turn
on or off.



The unit is not operating normally.

...you can reset the unit as follows:



Press and hold the POWER button for at least five
seconds. This will force the unit to power off then
turn the unit back on.



Unplug the power cord, wait at least five seconds,
and then plug it in again.

33

Reference

Specifications

General

Dimensions (approx.) 12.8 X 8 X 3 inches (326 X 215 X 78 mm) without feet

Mass (approx.) 2.3 kg (5 Ibs)

Operating temperature 41˚F to 95˚F (5˚C to 35˚C)

Operating humidity 5 % to 90 %

Audio recording format

Sampling frequency 44.1kHz

Compression format MP3

Sampling bitrate 128Kbps

Playback

Frequency response DVD (PCM 48 kHz): 20 Hz to 20 kHz, CD: 20 Hz to 20 kHz

DVD (PCM 96 kHz): 20 Hz to 44 kHz

Signal-to-noise ratio More than 85 dB (SPEAKER OUT)

Harmonic distortion Less than 0.007% (SPEAKER OUT)

Dynamic range More than 85 dB (SPEAKER OUT)

Inputs

Audio input (optical audio) 3 V (p-p), 75 Ω, Optical connector x 1

AUDIO IN 0 dBm more than 47 kohms, RCA jack (L, R) x 1

Outputs

VIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1

COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

HDMI video/audio output 19 pin (HDMI standard, Type A)

Amplifier

Output power Front: 75W + 75W (4Ω at 1 kHz, THD 10 %)

Subwoofer: 150W (3Ω at 60 Hz, THD 10 %)

Tuner Specifications

Tuning Range (FM) 87.5 - 108 MHz

Intermediate Frequency (FM) 10.7 MHz

Signal-to-noise ratio 60 dB (Mono)

Tuning Range (AM) 520 - 1,720 kHz

Intermediate Frequency (AM) 450 kHz

Antenna Wire antenna (FM)

Loop antenna (AM)



Designs and specifications are subject to change without notice for improvement.

Speakers

Front (J10D-SF)

Type: 2 Way 3 Speaker

Impedance: 4 Ω

Frequency Response: 100 - 20,000 Hz

Sound Pressure Level: 82 dB/W (1m)

Max. Input Power: 150W

Net Dimensions (W x H x D): 104 x 328 x 216 mm

Net Weight: 2.9 kg

Active Subwoofer (J10D-SA)

Power requirements: AC 120V, 60 Hz

Power consumption: 90W

Type: 1 Way 1 Speaker

Impedance: 3 Ω

Frequency Response: 65 - 1,500 Hz

Sound Pressure Level: 80 dB/W (1m)

Max. Input Power: 300W

Net Dimensions (W x H x D): 216x 328 x 317 mm

Net Weight: 8.3 kg

34

Notes

35

Reference

Notes

This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original
purchaser of the product and effective only when used in the United States, excluding U.S. Territories.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE
WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or

consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to
you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,

maintenance or failure to maintain, or separate system components; and

• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.

Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.

CUSTOMER INTER-ACTIVE CENTER NUMBERS:

WARRANTY PERIOD:

LABOR: 90 days from the Date of Purchase.

PARTS: One Year from the Date of Purchase.

* Parts replaced are warranted for the remaining portion

of the original warranty period.

HOW SER

VICE IS HANDLED:

Call 1-800-243-0000 for instructions on getting the

defective unit repaired or replaced.

Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.

Shipping both ways will be paid by LG during the
Warranty Period. After the Warranty Period, you pay
inbound shipping charges and LG pays return shipping
charges.

Visit our website at: http://www.lgservice.com

For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance

Call 1-800-243-0000 (24 hours a day, 365 days per year)

and select appropriate options from the menu.

Or visit our website at http://www.lgservice.com

LG Electronics, Inc.

Limited Warranty - USA

LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ

P/NO: MFL30582485

Issue 0

Printed in China