LG IPS225TX, IPS235TX User Manual

ENGLISH

OWNER’S MANUAL

LCD MONITOR

Please read this manual carefully before operating
your set and retain it for future reference.

LCD MONITOR MODEL

IPS225T
IPS235T

www.lg.com

Important Precautions

NOTE

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.

NOTE

This epuipment has been tested and found to comply with the limits for a class
B digital device,pursuant to part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.This equipment generates,uses and can radiate radio frequency
energy and,if not installed and used in accordance with the instructions,may
cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and the receiver.

-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

A3

TABLE OF CONTENTS

2

ENGLISH

ENG

CONTENTS

3 ASSEMBLING AND PREPARING

3 Unpacking

4 Parts and buttons

6 Setting up the Monitor set

6 - Attaching the Stand Base

6 - Detaching the Stand Base

7 - Mounting on a table

8 - Mounting on a wall

10 USING THE MONITOR SET

10 Connecting to a PC

10 - D-SUB connection

10 - DVI-D connection

12 CUSTOMIZING SETTINGS

12 Accessing The Main Menus

13 Customizing Settings

13 - Menu Settings

14 - PICTURE

15

- COLOR

16 - DISPLAY

17 - OTHERS

18 MODE Setting

19 DUAL PACKAGE Setting

20 TROUBLESHOOTING

22 SPECIFICATIONS

22 IPS225T

23 IPS235T

24 Preset Modes(Resolution)

24 Indicator

ASSEMBLING AND PREPARING

3

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.

CD(Owner's Manual) /

Card

D-SUB Cable

(This signal cable may be attached

to this product before shipping out.)

(This cable is not included in all

Power Cord

DVI-D Cable

countries.)

ENGLISH

ENG

Stand Base

CAUTION

Do not use any unapproved accessories to ensure the safety and product life span.



Any damages or injuries by using unapproved accessories are not covered by the warranty.



NOTE

The accessories supplied with your product may vary depending on the model.



Product specifications or contents in this manual may be changed without prior notice due to upgrade



of product functions.
User should use shielded signal interface cables (D-SUB cable / DVI-D cable) with ferrite cores to



maintain standard compliance for the product.

ENGLISH

ENG

ASSEMBLING AND PREPARING

4

Parts and buttons

Power Indicator

Lighting On: Turned on



Lighting Off: Turned off



AC-IN /

电源输入

(Power Button)

Button (See p.13)

D-SUB DVI-D

Connection panel (See p.10)

ASSEMBLING AND PREPARING

Button Description

MENU

MODE Use this button to enter USER, MOVE,TEXT,PHOTO,sRGB menus.(See p.18)

DUAL Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.19)

AUTO When adjusting your display settings, always press the AUTO button on the MONITOR

INPUT You can choose the input signal.

EXIT Exit the OSD(On Screen Display).

(Power Button)

Accesses the main menus.(See p.13)

OSD LOCKED/
UNLOCKED

SETUP OSD. (Only supported in Analog Mode)

The best display mode 1920 x 1080

• When two input signals are connected, you can select the input signal (D-SUB/DVI)
you want.

• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.

Turns the power on or off.

Power Indicator The power indicator stays blue if the display is running

This function allows you to lock the current control settings, so
that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message "OSD
UNLOCKED" should appear.

properly (On Mode). If the display is in Sleep Mode, the power
indicator blinks blue.

5

ENGLISH

ENG

ASSEMBLING AND PREPARING

6

ENGLISH

ENG

Setting up the Monitor set

Attaching the Stand Base

Place the Monitor set with the screen side

1

down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.

Attach the Stand Base and then tighten the

2

screw to the right with a Coin.

Detaching the Stand Base

Place the Monitor set with the screen side

1

down on a flat and cushioned surface.

Turn the screw to the left, and then pull out the

2

Stand Base from the Stand Body.

Stand Base

Stand Base

CAUTION

This illustration depicts the general model of



connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down holding



only the stand base. The product may fall
and get damaged or injure your foot.

ASSEMBLING AND PREPARING

7

Mounting on a table

Lift and tilt the Monitor set into its upright

1

position on a table.

Leave a 10 cm (minimum) space from the wall
for proper ventilation.

10 cm

10 cm

10 cm

10 cm

WARNING

When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.

Do not touch or press the screen when
adjusting the angle of the monitor.

ENGLISH

ENG

Connect the Power Cord to a wall outlet.

2

Press (Power) button on the front switch

3

panel to turn the power on.

CAUTION

Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.

NOTE

Tilt from +15 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.

15- 5

Front Rear

ASSEMBLING AND PREPARING

8

ENGLISH

ENG

Using the Kensington security system

The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit

Connect the Kensington security system cable
between the Monitor set and a table.

http://www.kensington.com

.

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.

10 cm

10 cm

10 cm

10 cm

NOTE

The Kensington security system is optional.
You can obtain it from most electronics stores.

When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
Please use VESA standard as below.

784.8 mm (30.9 inch) and under



* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm

787.4 mm (31.0 inch) and above



* Please use VESA standard wall mount pad

and screws.