LG GSA-H62L User Manual

Before installing the drive, turn off
the system power.

Disconnect the power cord,
and remove the cover.

• Remove a vacant 5.25” drive bay panel from
the computer. Slide the drive into the drive
bay.

Connecting the SATA Power
Cable

• Connect the power cable so the projection of
the cable connector side to come to the left
side. Be careful not to connect upside down.

NOTE:

Improper connection may damage the drive
and void the warranty. Generally, the power
connector can only fit one way.

Installing the Drive



Connect to the power connector of the PC.

Red

Connecting the SATA Data
Cable

• Connect the data cable. Be careful not to
connect upside down.

Replace the cover,
connect the power cord
and restart your computer.

• Your computer configuration may different
from the illustrations.



Connect to the SATA connector
on the PC's Motherboard.