LG GR-U292SQ User Manual
PLEASE
READ THIS OWNER’S MANUAL THOROUGHLY
BEFORE OPERATING AND KEEP IT HANDY
FOR REFERENCE AT ALL TIMES.
OWNER’S MANUAL
REFRIGERATORFREEZER
LESEN SIE BITTE DIESE BEDIENUNGSANLEITUNG
SORGFLTIG DURCH, UND HEBEN SIE SIE FR
SPTERE FRAGEN GRIFFBEREIT AUF.
BEDIENUNGSANLEITUNG
KÜHL- GEFRIERGERÄT
P/No. 3828JP8020U
INSTALLATION ............................................ 3
CONTENTS
FEATURE CHART ........................................ 4
OPERATION .................................................. 5
Starting
Temperature Control
Ice Making
Chilled Compartment
Defrosting
Deodorizer
SUGGESTIONS ON FOOD STORAGE ...... 8
REVERSIBLE DOOR ................................... 9
Precaution
How to reverse the door
CLEANING .................................................. 11
GENERAL INFORMATION ....................... 11
LAMP REPLACEMENT ............................. 12
IMPORTANT WARNINGS ......................... 12
BEFORE CALLING FOR SERVICE ......... 13
2
3
INSTALLATION
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION, AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
SELECT A GOOD LOCATION
1. Place your refrigerator where it is easy to use.
2. Avoid placing the refrigerator near heat
sources, direct sunlight or moisture.
3.
4. To avoid vibrations, the refrigerator must be
level. If necessary, adjust the leveling screw(s)
to compensate for unevenness of the floor.
To close the doors easily, the front should be
slightly higher than the rear. Leveling screw(s)
can be turned easily by tipping the cabinet
slightly. Turn the leveling screw(s) clockwise to
raise the refrigerator, counterclockwise to
lower it.
NEXT
1. Wipe off all dust accumulated during shipping
and clean your refrigerator thoroughly.
2. Install accessories such as the ice cube box,
evaporating tray cover, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. Prior to use, let the refrigerator run for 2-3
hours. Check the flow of cold air in the freezer
compartment to ensure proper cooling has
taken place.Your refrigerator is now ready for
use.
To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain
at least 2 inches (5 cm) from the rear wall.
FEATURE CHART
• If you found some parts missing from your unit, they may be parts only used in
other models.
FREEZER
COMPARTMENT
Twisting Ice Tray
Freezer Temperature
Control Knob
REFRIGERATOR
COMPARTMENT
Chilled Compartment
Refrigerator Temperature
Control Micom
Lamp
Deodorizer
Vegetable Drawer
Used to keep fruits
and vegetables, etc.
fresh and crisp.
Freezer Door Rack
Egg Storage Rack
(262 only)
(292 only)
Refrigerator Door Rack
Leveling Screws
• If you found some parts missing from your unit, they may be parts only used in
NOTE
other models.
4
OPERATION
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
TEMPERATURE CONTROL
REFRIGERATOR
The default setting of the temperature control button for the
refrigerator compartment is NORMAL.
You can set the refrigerator temperature using the Refrigerator
Temperature Control.
Whenever pressing the button, the LED emit light.
The temperature of the compartment is highered as the LED lumi-
nesce from MIN to MAX.
You can select the desired set point in five (5) steps between
minimum and maximum.
For the economic electricity, set the LED to the MIN position.
FREEZER
TEMP.CONTROL
[TEMPERATUROL 5 STEPS]
5 GRADES OF TEMPERATURE
[
The default setting of the temperature control knob for the freezer
compartment is the MID point.
For colder temperatures, adjust the control knob to MAX, and for
warmer temperatures, adjust the control knob to MIN position.
5
Loading...