LG GR-U171CLK Owner’s Manual

DIN EN ISO 9001:2000

Certificate: 01 100 89355

ISO 9001

CERTIFICATION

Refrigerator

User's Guide

Please read this User's Guide carefully

before operating and keep it handy for

reference at all times.

P/No. 3828JP8014G

CONTENTS

IMPORTANT WARNINGS .................................... 3

INSTALLATION ..................................................... 3

FEATURE CHART ................................................ 4

OPERATIONS ........................................................ 5

Before Setting The Temperature

Controls For Refrigerator

Ice Making

Defrosting

Vitamin Kit (Optional)

SUGGESTIONS ON FOOD STORAGE ............. 6

CLEANING ............................................................ 6

GENERAL INFORMATION ................................ 7

LAMP REPLACEMENT ...................................... 7

BEFORE CALLING FOR SERVICE ................. 8

22

IMPORTANT WARNINGS

DO NOT USE AN EXTENSION CORD ABOUT GROUNDING (EARTHING)

If possible, connect the refrigerator to its own
individual electrical outlet to prevent it and other
appliances or household lights from causing an
overload that could cause a power outage.

ACCESSIBILITY OF SUPPLY PLUG

The refrigerator-freezer should be so positioned
that the supply plug is accessible for quick
disconnection when accident happens.

SUPPLY CORD REPLACEMENT

If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.

VERY DANGEROUS ATTRACTION

An empty refrigerator can be a dangerous attraction
to children. Remove either gaskets, latches, lids or
the entire door from your unused appliance, or take
some other action to make it harmless.

In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.

In order to prevent possible electric shock, this
appliance must be grounded.

Improper use of the grounding plug can result in an
electric shock. Consult a qualified electrician or
service person if the grounding instructions are not
completely understood, or if you have doubts on
whether the appliance is properly grounded.

DO NOT MODIFY OR EXTEND THE
POWER CORD LENGTH

It will cause electric shock or fire.

This appliance must be grounded (earthed).

DON'T WAIT! DO IT NOW!

Do not store inflammable materials, explosives

or chemicals in the refrigerator.

INSTALLATION

1. Select a good location.
Place your refrigerator where it is easy to use.

2. Avoid placing the unit near heat sources, direct
sunlight or moisture.

3.

To ensure proper air circulation around the
fridge-freezer, please maintain sufficient
space on both the sides as well as top and
maintain at least 2 inches (5 cm) from the
rear wall.

4. To avoid vibrations, the unit must be level.

If required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screws can be turned easily by tipping
the cabinet slightly.
Turn the leveling screws clockwise( ) to raise
the unit, counterclockwise( ) to lower it.

5. Don't install this appliance below 5 °C. It may

cause the debasement of the refrigerator.

NEXT

1. Clean your refrigerator thoroughly and wipe off
all dust accumulated during shipping.

2. Install accessories such as ice cube box, etc., in
their proper places.They are packed together to
prevent possible damage during shipment.

3. You have a model with bar-type handle,
assemble the handle according to instruction
card.

4. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
the same outlet.

5. Prior to storing food, leave your refrigerator on
for 2 or 3 hours.
Check the flow of cold air in the freezer
compartment to ensure proper cooling.
Your refrigerator is now ready for use.

3