DIN EN ISO 9001:2000
Certificate: 01 100 89355
ISO 9001
CERTIFICATION
Refrigerator
User's Guide
Please read this User's Guide carefully
before operating and keep it handy for
reference at all times.
P/No. 3828JP8014G
3828JP8014A(OM)‡»` 2003.3.27 8:2 AM ` 2
CONTENTS
INSTALLATION ..................................................... 3
FEATURE CHART ................................................ 4
OPERATIONS ........................................................ 5
Before Setting The Temperature
Controls For Refrigerator
Ice Making
Defrosting
SUGGESTIONS ON FOOD STORAGE ............. 6
CLEANING ............................................................ 6
GENERAL INFORMATION ................................ 7
LAMP REPLACEMENT ...................................... 7
IMPORTANT WARNINGS ................................... 7
BEFORE CALLING FOR SERVICE ................. 8
22
3828JP8014A(OM)‡»` 2003.3.27 8:2 AM ` 3
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE
LATEST TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select a good location.
Place your refrigerator where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight or moisture.
3. There must be proper air circulation around
your refrigerator to keep it operating efficiently.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inches (25cm) or
greater clearance above the refrigerator and
2 inches (5cm) or more from the wall.
The refrigerator should be elevated 1 inch
(2.5cm) from the floor, especially if it is
carpeted.
4. To avoid vibrations, the unit must be level.
If required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screws can be turned easily by tipping
the cabinet slightly.
Turn the leveling screws clockwise( ) to raise
the unit, counterclockwise( ) to lower it.
5. Don't install this appliance below 5 °C. It may
cause the debasement of the refrigerator.
NEXT
1. Clean your refrigerator thoroughly and wipe off
all dust accumulated during shipping.
2. Install accessories such as ice cube box, etc., in
their proper places.They are packed together to
prevent possible damage during shipment.
3. You have a model with bar-type handle,
assemble the handle according to instruction
card.
4. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
the same outlet.
5. Prior to storing food, leave your refrigerator on
for 2 or 3 hours.
Check the flow of cold air in the freezer
compartment to ensure proper cooling.
Your refrigerator is now ready for use.
3