LG GRD907SL User Manual

OWNER’S MANUAL

BOTTOM FREEZER REFRIGERATOR

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

P/No. : MFL62184435

www.lg.com

TABLE OF CONTENTS

3 PRODUCT FEATURES

IMPORTANT SAFETY INSTRUCTIONS

7 COMPONENTS

7 Refrigerator Exterior 8 Refrigerator Interior

9 INSTALLATION

9 Installation Overview 10 Unpacking Your Refrigerator 10 Choosing the Proper Location 10 - Flooring 11 - Ambient Temperature 11 - Measuring the Clearances 11 Removing/Assembling the Refrigerator

Door Handles

12 Removing/Assembling the Freezer

Drawer Handle

12 Removing/Assembling the Doors and

Drawers 12 - Removing the Left Refrigerator Door 14 - Removing the Right Refrigerator Door 15 - Assembling the Right Refrigerator Door 16 - Assembling the Left Refrigerator Door 17 - Removing the Freezer Drawers 19 - Assembling the Freezer Drawers 20 Connecting the Water Line 20 - Before You Begin 20 - Water Pressure 20 Turning On the Power 21 Leveling and Door Alignment 21 - Leveling 21 - Door Alignment

22 HOW TO USE

22 Before Use 23 Control Panel 23 - Control Panel Features 25 In-Door Ice Bin 25 - Detaching the In-Door Ice Bin 25 - Assembling the In-Door Ice Bin 26 Automatic Icemaker

- Turning the Automatic Icemaker On or Off

26 27 - When You Should Turn the Icemaker Off 27 - Normal Sounds You May Hear 27 - Preparing for Vacation 28 Ice and Water Dispenser 28 - Dispenser 28 - Using the Dispenser 28 - Locking the Dispenser Selector buttons 28 - Cleaning the Dispenser Tray 29 Storing Food 29 - Food Preservation Location 30 - Food Storage Tips 30 - Storing Frozen Food 31 Humidity Controlled Crisper and

Temperature Controlled Pantry Drawer Detaching and Assembling the Storage Bins

32 33

Door-In-Door

35 Adjusting the Refrigerator Shelves

36 MAINTENANCE

36 Cleaning 37 Replacing the Pure N Fresh 38 Replacing the Water Filter

39 SMART DIAGNOSIS

39 Using Smart Diagnosis

40 TROUBLESHOOTING

This product must only be used with a 240v 50Hz mains supply.

PRODUCT FEATURES

* Depending on the model, some of the following functions may not be available.

FILTERED WATER AND ICE DISPENSER

The water dispenser dispenses fresh, chilled water. The ice dispenser dispenses cubed and crushed ice.

DOOR ALARM

The Door Alarm function sounds if a refrigerator door or freezer drawer remains open. If a refrigerator door or freezer drawer is left open for more than 60 seconds, a warning alarm sounds at 30 second intervals.

HUMIDITY CONTROLLED CRISPER

The Humidity Controlled Crisper is designed to help keep your fruits and vegetables fresh and crisp. You can control the amount of humidity in the crisper by adjusting the setting between Low and High.

TEMPERATURE CONTROLLED PANTRY DRAWER (some models only)

Temperature Controlled Pantry Drawer provides storage space with a variable temperature control that keeps the compartment colder than the refrigerator. It is a convenient place to store sandwiches or meat to be cooked.

EXPRESS FREEZING

Ice production can be increased by approximately 20 percent when the freezer section is maintained at the coldest temperature for a 24-hour period.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

This guide contains many important safety messages. Always

This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can cause serious injury and death, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard signal word WARNING or CAUTION. These words mean:

WARNING

CAUTION

You can be killed or seriously injured if you do not follow instructions.

Indicates an imminently hazardous situation which, if not avoided, may result in minor or moderate injury, or product damage.

read and obey

all safety messages.

WARNING

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following.

Power

NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull

it straight out from the outlet. Immediately repair or replace all power cords that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

Do not use an uncertified power outlet.

Unplug the power plug immediately in the event of a blackout or thunderstorm to avoid electrical

surges. Plug in the power plug with the power cord facing downward.

Installation

Contact an authorized service center when you install or relocate the refrigerator.

When moving your refrigerator away from the wall, be careful not to roll over or damage the

power cord. Connect this product to a dedicated grounded electric outlet conforming with the rating prior

to use. It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.

Do not install the refrigerator where there may be a danger of it falling or toppling over.

Use

DO NOT allow children to climb, stand, or hang on the refrigerator doors or shelves in the

refrigerator. They could damage the refrigerator and seriously injure themselves. Do not place heavy objects on the dispenser of the refrigerator or hang onto it.

Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.

Do not put live animals inside of the refrigerator.

Do not allow children to climb into the product when it is on or out of use.

In the event of a refrigerant leak (propane/LPG), ventilate sufficiently and contact an authorized

service center before use. Do not touch or disassemble the electric outlet of the refrigerator. In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ventilate

sufficiently and contact an authorized service center. Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the

refrigerator or store them inside the refrigerator. Do not place the refrigerator in the vicinity of flammable gas or any source of heat or flame.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following.

This refrigerator is intended for normal indoor domestic use. Do not install this unit in direct

sunlight, or under any outdoor shelter, verandah or patio. T yhis Refrigerator is designed for normal domestic, indoor use only. It is not designed for Mobile

applications such as a mobile home, caravan, or leisure water craft. Do not use this product for special purposes (storage of medicine or test materials, etc).

Unplug the power plug before cleaning or maintaining the refrigerator.

When you replace the light bulb in the refrigerator, unplug the refrigerator or turn off the power.

Do not modify or extend the power cord.

Do not use a dryer to dry the interior. Do not light a candle to remove the interior odor.

For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit

checked by a qualified electrician to make sure the outlet is properly grounded. Do not use an outlet that cannot be turned off with a switch. Do not use an extension cord. It is the

user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not use an applications such as a mobile home, caravan, or leisure water craft.

Disconnect the power cord immediately if you hear any abnormal noise, smell a strange odor or

detect smoke. Turn the power off if water or dust penetrates into the refrigerator. Call for an authorised Service

Repairer. Do not disassemble or modify the refrigerator.

Do not put hands, feet, or metal objects below or behind the refrigerator.

Do not operate the refrigerator or touch the power cord with wet hands.

In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector

mechanism or with the heating element that releases the cubes. Do not place fingers or hands on the automatic ice-making mechanism while the refrigerator is plugged in.

When dispensing ice from the dispenser, do not use crystal ceramics.

Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your

refrigerator is in operation. Do not put glass containers, glass bottles or carbonated beverages in the freezer.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Do not refreeze frozen food that have thawed completely. It may result in a serious health issue.

If you are throwing away your old refrigerator, make sure the CFC refrigerant is removed for proper

disposal by a qualified servicer. If you release CFC refrigerant, you may be fined or imprisoned in accordance with the relevant environmental law.

Disposed or abandoned refrigerators are dangerous, even if they are sitting for only a few days.

When disposing the refrigerator, remove the packing materials from the door or take off the doors but leave the shelves in place so that children may not easily climb inside.

If the refrigerant gas has leaked, do not touch the refrigerator or the outlet and ventilate the room

immediately. A spark could trigger an explosion causing a fire or burns. Because this refrigerator uses natural gas (isobutene, R600a) as the environment-friendly refrigerant, even a small amount (50~60g) is combustible. If gas leaks from severe damage during delivering, installing or using the refrigerator, any spark may cause fire or burns.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following.

CAUTION

Installation

The refrigerator must be properly installed in accordance with the Installer Instructions that

were attached to the front of the refrigerator. Be careful when you unpack and install the refrigerator. Immediately dispose of packing

materials (plastic) out of reach of children.

Use

Close the door carefully when children are around.

Keep fingers out of pinch point areas; clearances between the doors and cabinets are

necessarily small. Be careful closing doors when children are in the area. If you do not store or place food properly, beware that it may fall and cause injury.

Maintenance

Mild dishwashing liquids can be added to water to aid cleaning with a soft cloth.

Do not use strong detergents like wax or thinners for cleaning. Clean with a soft fabric.

Wipe foreign objects (dust, water, etc) off the prongs of the power plug and contact areas

prior to installing.

WARNING

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of

obstruction. Do not use mechanical devices or other means to accelerate the defrosting process, other than

those recommended by the manufacturer. Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance, unless

they are of the type recommended by the manufacturer. The refrigerant and insulation blowing gas used in the appliance require special disposal

procedures. When disposal, please consult with service agent or a similarly qualified person.

This appliance contains a small amount of isobutane refrigerant (R600a), natural gas with high environmental compatibility, but it is also combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged. Refrigerant squirting out of the pipes could ignite or cause an eye injury. If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes.

In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs, the size of the room in which the appliance may be sited depends on the amount of refrigerant used. The room must be 1m appliance. The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance. Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.

in size for every 8g of R600a refrigerant inside the

SAVE THESE INSTUCTIONS

COMPONENTS

Use this page to become more familiar with the parts and features of your refrigerator. Page references are included for your convenience.

*The appearance and specifications of the actual product may differ depending on the model.

Refrigerator Exterior

Handle

Opens and closes

Filtered Water and Ice Dispenser

Dispenses filtered water and ice.

the door.

Button

LED Display

Displays the refrigerator and freezer target temperature, the water filter condition and the dispenser status.

Control Panel

Sets the refrigerator and freezer target temperatures, the water filter condition and the dispenser mode.

Ez Handle

Easily opens the freezer door.

Refrigerator

Preserves food.

LED Light (some models only)

LED lights up under the refrigerator door.

Freezer

Preserves frozen food.

COMPONENTS

Refrigerator Interior

LED interior lamps

The interior lamps light up the inside of the refrigerator.

Water filter

Purifies water.

NOTE

Ideally, the filter should be replaced every 6 months. Please refer to the “Replacing the filter” section in this manual for details. * This function may

not be available, depending on the model.

Indoor Ice Bin

Ice cubes are automatically produced.

Crisper

Controls humidity and helps vegetables and fruit to stay crisp for longer.

Fixed Door Bin

Used to preserve chilled food or drinks.

Pullout Drawer

Used for extra storage within the freezer compartment.

Durabase® and Durabase® Divider

The Durabase is a storage space recommended for the preservation of large food items. The Durabase Divider is used to organize the Durabase area into sections. It can be adjusted from side to side to accommodate items of different sizes.

Adjustable Refrigerator Shelf

The shelves in your refrigerator are adjustable to meet your individual storage needs.

Door-In-Door Case

The convenience of a “soft cool” storage area and ease in spreading product stored in this area.

Cheese & Butter Bin

Cheese & Butter and Condiment bins, that are specially designed for food that can be stored at a warmer temperature. This makes spreading butter and slicing cheese easier.

Condiment Bin

Temperature Controlled Pantry Drawer (some models only)

Allows you to store food items at a different temperature than the regular refrigerator area.

F-Basket

Area in the freezer that allows you to fill smaller items for quick cooling.

INSTALLATION

Installation Overview

Please read the following installation instructions first after purchasing this product or transporting it to another location.

1 Unpacking your

refrigerator

4 Connecting the water

supply and water line

2 Choosing the proper

5 Leveling and Door

NOTE

Connect to potable water supply only.

location

3 Disassembling/Assembling

Alignment

INSTALLATION

Unpacking Your Refrigerator

WARNING

Use two or more people to move and

install the refrigerator. Failure to do so can result in back or other injury.

Your refrigerator is heavy. When moving

the refrigerator for cleaning or service, be sure to protect the floor. The refrigerator has rollers. Wind in the leveling feet and pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.

Keep flammable materials and vapors,

such as gasoline, away from the refrigerator. Failure to do so can result in fire, explosion, or death.

Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels, the model and serial number label, or the Tech Sheet that is located under the front of the refrigerator behind the base grille.

To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator.

Refrigerator shelves are installed in the shipping position. Please reinstall shelves according to your individual storage needs.

Choosing the Proper Location

Select a place where a water supply can

be easily connected for the automatic icemaker.

NOTE

The water pressure must be between 150kpa to 500kpa on models without a water filter and between 200kpa ~ 500kpa on models with a water filter.

The refrigerator should always be plugged

into its own individual properly grounded electrical outlet rated for 240 Volts, 50 Hz, AC only, and fused at 15 or 20 amperes. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a separate circuit serving only this appliance be provided.

WARNING

To reduce the risk of electric shock, do not install the refrigerator in a wet or damp area.

Flooring

To avoid noise and vibration, the unit must be leveled and installed on a solidly constructed floor. Older timber floors can flex and cause door alignment limitations. If required, adjust the front leveling legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling legs can be turned easily by tipping the cabinet slightly. Turn the leveling legs to the left to raise the unit or to the right to lower it. (See Leveling and door AlIgnment.)

NOTE

Installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended.

INSTALLATION

Ambient Temperature

Install this appliance in an area where the temperature is between 13°C and 43°C. If the temperature around the appliance is too low or high, cooling ability may be adversely affected. Do not store the refrigerator in Direct Sunlight or sheltered outdoor areas.

Measuring the Clearances

Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 inches (61 cm) in front of the refrigerator to open the doors, and at least 2 inches (5.08 cm) between the back of the refrigerator and the wall, and 2cm on each side for proper ventilation and installation clearances.

24” (61 cm)

Removing/Assembling the Refrigerator Door Handles

NOTE

Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles, follow the directions below.

Removing the Handles

Loosen the set screws with a 3/32 in.

Allen key and remove the handle.

Only if required, loosen the mounting

fasteners door and handle using a remove the mounting fasteners.

that connect to the refrigerator

/4 in. Allen key,

2” (5.08 cm)

Assembling the Handles

If already removed, assemble the

mounting fasteners at both ends of the handle using a 1/4 in. Allen key.

Place the handle on the door by fitting

the handle footprints over the mounting fasteners and tightening the set screws with a 3/32 in. Allen key.

INSTALLATION

Removing/Assembling the Freezer Drawer Handle

Removing the Handles

Loosen the set screws located on the

lower side of the handle with a 1/8 in. Allen key and remove the handle.

Loosen the mounting fasteners that

connect to the freezer drawer and handle using a 1/4 in. Allen key, and remove the mounting fasteners.

Assembling the Handles

Assemble the mounting fasteners at

both ends of the handle using a 1/4 in. Allen key.

Place the handle on the door by fitting

the handle footprints over the mounting fasteners and tightening the set screws with a 1/8 in. Allen key.

WARNING

When the customer takes apart the handle or assemble it from a refrigerator, please be cautious of following things.

Hold the handle with your own hand to

make sure not to drop the handle to the floor or instep while taking apart the handle from a refrigerator. Do not swing the handle towards people or

animals after taking apart the handle. Insert the bracket hole of the handle into

the stopper bolt of the door exactly, and then assemble the set screws to fix the handle. Check if there’s any gap between the door

and handle after fixing the handle.

Removing/Assembling the Doors and Drawers

Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening.

WARNING

If your entrance door is too narrow for the

refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway.

Use two or more people to remove and

install the refrigerator doors. Failure to do so can result in back or other injury.

Disconnect the electrical supply to the

refrigerator before installing. Failure to do so could result in serious injury or death.

Do not put hands, feet or other objects into

the air vents, base grille or bottom of the refrigerator. You may be injured or receive an electrical shock.

Be careful when handling the hinge, base

grille and stopper. It may result in injury. Remove food and bins from the doors and

drawers before detaching.

Removing the Left Refrigerator Door

Turn off water supply & disconnect the joiner as per the diagram below.

The water supply to the left hand door

dispenser is connected to the upper right part of the rear surface of the refrigerator. Remove the ring in the joint area. Hold the water supply connection and gently push the Collet to detach the water supply line as shown in and .

Collet

NOTE

Detachment of the water supply line is applicable and essential only when detaching the left refrigerator door.

INSTALLATION

After disconnecting the water feed tube,

open the left door. Remove the screw from the hinge cover at the top of the refrigerator. Lift the hook (not visible), located at the bottom of the front side of the cover

Remove the cover and pull out the tube .

Disconnect all wire harnesses

with a flat-head screwdriver.

Lift the door from the middle hinge pin and

remove the door.

CAUTION

Place the door, inside facing up, on a non-scratching surface.

Rotate the hinge lever counterclockwise

. Lift the top hinge free of the hinge

lever latch.

Hinge Lever Latch

CAUTION

When lifting the hinge free of the latch, be careful that the door does not fall forward.

INSTALLATION

Removing the Right Refrigerator Door

Open the door. Remove the top hinge

cover screw located at the bottom of the front side of

the cover , with a flat-head screwdriver.

Detach the wire harness .

. Lift the hook (not visible),

Lift the door from the middle hinge pin and

remove the door.

CAUTION

Place the door on the floor, inside facing up, on a non-scratching surface.

Rotate the hinge lever clockwise.

Lift the top hinge lever latch.

CAUTION

When lifting the hinge free of the hinge lever latch, be careful that the door does not fall forward.

free of the hinge

Hinge Lever Latch

Assembling the Right Refrigerator Door

INSTALLATION

Install the right-side door first.

Make sure that the plastic sleeve is

inserted in the bottom of the door. Lower the door onto the middle hinge pin as shown in the figure.

Fit the top hinge over the hinge lever

latch and slot it into place. Rotate the lever

counterclockwise to secure the hinge.

Hinge Lever Latch

Make sure that the door-switch located

inside the cover is tightly connected. Position the cover in its place. Insert and tighten the cover screw .

Install the grounding screw and connect

the wire harness

INSTALLATION

Assembling the Left Refrigerator Door

Install the left refrigerator door after the right door is installed.

Make sure that the plastic sleeve is

inserted in the bottom of the door. Install the refrigerator door onto the middle hinge.

Fit the top hinge over the hinge lever

latch and slot it into place. Rotate the lever clockwise and fasten the hinge.

Push the water supply tube into the hole

on the top case and pull it through the backplate.

Hold the water supply connection and

gently push in the collet to connect the water supply line as shown in . Insert the tube at least 5/8 inch (15 mm) into the connector. Assemble the clip to the joint part for fastening.

and

Hinge Lever Latch

Install the grounding screw and connect all

the wire harnesses.

Collet

Make sure that the door-switch located

inside the cover is tightly connected. Place the cover in its position and tighten the cover screw .

+ 36 hidden pages