Keep ventilation openings, in the appliance enclosure or in
the built-in-structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartment, unless they are recommended by the
manufacturer.
The refrigerant and insulation blowing gas used in the
appliance requires special disposal procedures. When
disposal, please consult with services agent or a similarly
qualified person.
3
Risk of Fire and Flammable Materials
This symbol alerts you to flammable materials that can ignite and
cause a fire if you do not take care.
Ÿ This appliance contains a small amount of isobutane refrigerant
(R600a), but it is also combustible. When transporting and
installing the appliance, care should be taken to ensure that no
parts of the refrigerating circuit are damaged.
Ÿ If a leak is detected, avoid any naked flames or potential sources of ignition and
air the room in which the appliance is standing for several minutes. In order to
avoid the creation of a flammable gas air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which the appliance is used should
correspond to the amount of refrigerant used. The room must be 1 m in size for
every 8 g of R600a refrigerant inside the appliance.
Ÿ When positioning the appliance, ensure the supply cord is not trapped or
damaged.
Ÿ Do not locate multiple portable socket-outlets or portable power supplieds at
the rear of the appliance.
2
4
5
Do not use or store
inflammable materials like
ether, benzene, alcohol,
medicine, LP gas, spray or
cosmetics
near or in the
refrigerator.
It may cause
explosion or fire.
6
7
Do not place glass
containers, bottles or cans
(especially those containing
carbonated drinks) in the
freezer compartment,
shelves or ice bin that will
be exposed to temperatures
below freezing.
8
Do not hang climb or stand on the drawer
compartment or shelf of the refrigerator
Do not insert the shelf from wrong side
• Please do not use a dishwasher to clean the lower drawers; the high temperature may cause
damage to the baskets which make them unusable.
• Please be careful while assembly & disassembly of glass shelf.
• If the appliance is equipped with a lock (some countries only), keep the key out of reach of
children.
9
5. Install Ref from long distance from power
Climate Class
Ambient Temperture
0
Range C
SN (Extended Temperate)
+10 - +32
N (Temperate)
+16 - +32
ST (Subtropical)
+16 - +38
T (Tropical)
+16 - +43/+10 - +43*
-
GL-*4**
GL-*3**
A
600
600
B
1780
1700
C
685
685D00E
640
640F685
685G1040
1040H1000
1000
plug.
Dimensions and Clearances
Too small of a distance from adjacent items
may result in degradation of freezing capability
and increased electricity costs. Allow over
50mm clearance from each adjacent wall when
installing the appliance.
Image for representation purpose only
Ambient Temperature
The appliance is designed to operate within a
li mited r ange o f ambi ent tem pera ture s,
depending on the climate zone. do not use the
appliance at a temperature exceeding the limit.
The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
The climate class can be found on the rating
label.
5. 5.After installing the appliance, connect the
power plug into a socket outlet. Before
moving and discarding the appliance,
disconnect the plug from the socket outlet.
*Australia, India, Kenya
NOTE
The appliances rated from SN to T are intended
to be used at an ambient temperature between
00
10 C and 43 C
Inverter-On feature (Optional)
Minimum requirement: UPS/ Inverter should be in ON condition having minimum
600VA capacity along with minimum 120Ah capacity battery connected with the
refrigerator’s power supply socket.
10
Door Cooling +
1
LED Lamp
Refrigerator Door
Basket
- The automatic defrosting system in the appliance ensures that the compartment remains free of ice build up
under normal operating conditions.
- If gasket is damaged, efficiency may be lowered owing to the escape of cool air.
11
- The automatic defrosting system in the appliance ensures that the compartment remains free of ice build up
under normal operating conditions.
- If gasket is damaged, efficiency may be lowered owing to the escape of cool air.
12
‘3’ or ‘4’.
When the Freezer compartment is not enough cold in winter, adjust the control for the freezer to High
(4/5/ ● / ●●)
For achieving temperature in Freezing , Energy and Storage Test, Freezer control may be required to set at
“●” or “●●”
Freezer Control
451
NormalMinMax
Recommended Location
4
5
For Regular Models
13
41
Superchill
ColdColdest
Ref.
Temp.
Whenever pressing the button, LED emitting the
light. The temperature is set in 7 steps, from COLD
to COLDEST cooling. (COLD = warmest, COLDEST
= coldest temperature)
14
Superchill
ColdColdest
Temperature Control
Ref.
Temp.
High
Low
15
DOOR COOLING (OPTIONAL)
16
VACATION TIME
During average length vacations, you will probably find it best to leave the refrigerator in operation.
Place freezable items in freezer for longer life.
If you are leaving the appliance turned off for an extended period of time, remove all food and
unplug the power cord. Clean the interior, and leave the doors slightly ajar to prevent mould from
growing in the appliance.
17
SMART FUNCTIONS (Only for Selected External Micom Models)
For appliances with the or logo
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
1. Close all refrigerator doors, and press and
hold display lock button to make it locked
state.
If the display has been looked for over 5
minutes, you must deactivate the look and then
reactivate it.
2. Press and hold fridge temperature button
for 3 seconds or longer.
(All display screens will be turned off, and in
a while, 3 will be displayed on the fridge
temperature display part.)
3. Open all refrigerator compartment and freezer
compartment doors and place the telephone
near the speaker hole at the top right side.
Check if the speaking side (microphone) of the
telephone is toward the speaker hole.
4. Do not take away the telephone while data is
being transmitted.
During the data transmission for smart diagnosis,
wait with the telephone placed near the speaker
hole at the top right side.
The remaining time for data transmission is
displayed on the display screen.
CAUTION
The transmission sound may be irritating. Do
not take away the telephone until the sound
stops for good diagnosis.
5. After the completion of the data transmission,
listen to the explanation of the consultant
about the result of the smart diagnosis.
When the data transmission is completed, along
with t he d ispla y of the d ata trans missi on
completion, the refrigerator will be automatically
turned off and on a few seconds later.
Listen to the explanation of the consultant about
the result of the analyzed diagnosis and follow the
instructions.
18
SMART FUNCTIONS (Only for Selected Internal Micom Models)
For appliances with the or logo
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
How to use the function
First, call LG service center. Only use the Smart Diagnosis feature when instructed to do so by the LG
call center agent.
1. Open all the doors of the refrigerator.
2. Press the refrigerator control (REF
TEMP) button for 3 sec or more.
Superchill
ColdColdest
Ref.
Temp.
3. If the buzzer sounds 4 times (Frequency
of SDS Buzzer is 2000Hz, 0.2sec Off/
0.2sec On 4 times) place the phone near
the speaker hole in the top right hand
side door hinge.
5. Do not take away the telephone while
data is being transmitted.
CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
6. During the data transmission for smart
diagnosis, hold the telephone 10cm
away from the speaker hole and avoid
any background noises. After inputting
SD S, SDS b uzzer w ill r ing. Afte r
completion of the data transmission,
the consultant will explain the result of
the smart diagnosis and advice
a c c o r d i ng l y. W h e n t h e d a t a
tran s m i s si o n i s c o mplet e d , t he
refrigerator will be automatically turned
off and on a few seconds later.
4. E n s ur e t he mic r op ho ne of t h e
telephone is towards the speaker hole.
Be aware!
Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be successful if the call is made from a mobile phone
with poor network reception.
19
LAMP REPLACEMENT
NOTE : This product applies LED Lamp which cannot be replaced
by the user. Please contact authorized service centre for
the lamp replacement.
INVERTER-ON FEATURE (Optional)
1. While using this feature, the refrigerator will work on basic requirement as required by
the product.
2. The results of the Inverter-On feature may vary depending on the number of appliances
that are running on inverter.
3. For optimum running of refrigerator during Inverter-On mode, it is recommended to
switch off the other appliances which are not in use.
4. It is recommended to confirm the quality of food items before consumption.
5. Ice cream etc. may get soften during the use of this feature, if situation arises so, it is
recommended to change the setting as per one’s choice.
• In the event of a blackout, call the electricity company and ask how long it is going to last.
- You should avoid door openings while the power is off.
- When the power supply gets back to normal, check the condition of the food.
20
• If there are chill compartments in the appliance, do not store vegetables and fruits with higher
moisture content in the chill compartments as they may freeze due to the lower temperature.
21
SUPPLY CORD
REPLACEMENT
If the supply cord is damaged, it
mus t b e rep l a c e d b y t h e
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.
22
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of
parts and materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of
waste material and can be reused after rework (recycling). For take
back, please contact with the local agency.
“(For CENELEC countries) This appliance can be used by children
aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.”
* CENELEC countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, MK, FR,
DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI,
ES, SE, CH, TR, GB
“This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.”
23
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.