LG GR-B227SBQ Owner’s Manual

<![if ! IE]>

<![endif]>FRANÇAIS ENGLISH

OWNER’S MANUAL

SXS

REFRIGERATOR

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

P/No. : MFL31095455

www.lg.com

Introduction

Installation

Operation

Suggestion on food storage

Care and maintenance

Table of contents

		3
Important safety instruction		3
Identification of parts		4
Where to locate		5
Door removal		6
Height adjustment		7
Starting		8
Adjusting the temperatures and functions		8
Ice making(Applicable to some models only)		11
Humidity control in the vegetable compartment		12
Convert into a vegetable or meat compartment (Applicable to some models only)		12
Deodorizer (Applicable to some models only)		12
Shelf (Applicable to some models only)
Wine holder (Applicable to some models only)		13
Egg box (Applicable to some models only)		13
Location of foods		14
Storing foods		15
How to dismantle parts		16
General information		17
Cleaning		17
Trouble shooting		18

2

Introduction

Entry
The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.
Date of purchase	:
Dealer purchased from	:
Dealer address	:
Dealer phone no.	:
Model no.	:
Serial no.	:

	Important safety instruction
	This refrigerator must be properly installed and located in accordance with the
	installation instructions before it is used.
	Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly
	and pull straight out from the outlet.
	When moving your appliance away from the wall, be careful not to roll over or
	damage the power cord.
	After your refrigerator is in operation, do not touch the cold surfaces in the freezer
	compartment, particularly when hands are damp or wet. Skin may adhere to these
	extremely cold surfaces.
	Unplug the power cord from the power plug for cleaning or other cares. Never touch
	it with wet hands because you can get an electric shock or be hurt.
	Never damage, process, severely bend, pull out, or twist power cord because power
	cord damage may cause a fire or electric shock. You have doubts on whether the
	appliance is properly grounded.
	Never place glass products in the freezer because they may be broken when their
	inner matters are frozen.
Don’t use an	If possible, connect the refrigerator to its own individual electrical outlet to prevent it and
extension cord	other appliances or household lights from causing an overload that could cause a power
	outage.
Accessibility of	The refrigerator-freezer should be so positioned that the supply plug is accessible for
Supply Plug	quick disconnection when accident happens.
Supply Cord	If the supply cord is damaged, it must be replaced by the manufacturer or its service
Replacement	agent or a similarly qualified person in order to avoid a hazard.
Warning	Do not modify or extend the Power Cord length.
Don’t store	It will cause electric shock or fire.
	Don’t store or use gasoline or other flammable
	vapor and liquids in the vicinity of this or any other appliance.
	3

		Introduction
	Child entrapment	DANGER: Risk of child entrapment.
	warning	Before you throw away your old refrigerator or freezer:
		Take off the doors but leave the shelves in place so that children may not easily climb
		inside.
	Warning	This appliance is not intended for use by persons (including children) with reduced
		physical, sensory or mental capabilities, or lack of experience and knowledge, unless
		they have been given supervision or instruction concerning use of the appliance by a
		person responsible for their safety.
	Warning	Children should be supervised to ensure that they do not play with the appliance.
	Grounding (Earthing)	In the event of an electric short circuit, grounding (earthing) reduces the risk of electric
	Warning	shock by providing an escape wire for the electric current.
		In order to prevent possible electric shock, this appliance must be grounded
		improper use of the grounding plug can result in an electric shock. Consult a qualified
		electrician or service person if the grounding instructions are not completely
		understood, or if you have doubts on whether the appliance is properly grounded.
		Identification of parts

Ice separation handle (Optional)

Ice making compartment (Optional)

Door rack

Ice box (Optional)

Lamp

Shelf (steel or glass)

Shelf

Door rack

Drawer (1 or 2)

Door rack

Lower cover

Freezer	Refrigerator
compartment	compartment
	Milk product corner
	Lamp
	Shelf
	Wine holder (Plastic or wire)
	Door rack(1 piece or 2 piece)
	Shelf
	Snack drawer (Optional)
	Egg box (Optional)
	Lamp
	Shelf (Folding or Normal)
	Door rack
	Vegetable drawer
	(1 or 2)
	Humidity switch
NOTE
• If you find some parts missing from your unit, they may be parts only used in other
models.
4

Installation

Where to locate

Select a good 1. Place your appliance where it is easy to use. location 2. Avoid placing the unit near heat sources,

direct sunlight or moisture.

3. To ensure proper air circulation around the fridge -freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall.

4. To avoid vibrations, the appliance must be leveled.

5.Don't install the appliance below 5°C. It may cause affect the performance.

Disposal of the This appliance contains fluid (refrigerant, lubricant)and is made of parts and old appliance materials which are reusable and/or recyclable.

All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). For take back, please contact with the local agency.

5

		Installation
	Door removal
Warning	Electric Shock Hazard
	Disconnect electrical supply to refrigerator	Lower cover
	before installing.

Failure to do so could result in death or serious injury.

If your access door is too narrow for the refrigerator to pass through, remove the refrigerator door and pass the refrigerator laterally.

Remove lower	Remove the lower cover by lifting upward.
cover
	NOTE
	• If a tube end is deformed or abraded, cut the part away.
Remove the		Hinge	Connection
	1) Removing the hinge cover by loosening the	cover	wires
freezer	screws. Separate all connection wires except
compartment	for the earth line after.
door	Upper hinge		Earth line

Upper hinge

Keeper

2) Remove the keeper by rotating it counter clockwise ( ) and then lifting the upper hinge up ( ).

NOTE

• When removing the upper hinge, be careful that the door does not fall forwards .

3) Remove the freezer compartment door by lifting it upward.

Lower hinge

Remove the	1) Loosen the hinge cover screws and remove
refrigerator	the cover. Remove connection wire, if any,
door	except for the earth line.
		Connection
		wires
	2) Remove keeper by rotating it clockwise ( )	Upper hinge	Keeper
	and then remove the upper hinge by lifting
	it up ( ).

	3) Remove the refrigerator compartment door
	by lifting it up.
	Lower hinge
Pass the	Pass the refrigerator laterally through access
refrigerator	door as shown in the right figure.
	6

Installation

	Height adjustment
If the freezer	Level the door by inserting flat ( - type) driver into the groove of the left height adjusting
compartment door	screw and rotate it clockwise ( ).
is lower than the
refrigerator
compartment door

If the freezer	Level the door by inserting flat ( - type) driver into the groove of the right height
compartment door	adjusting screw and rotate it clockwise ( ).
is higher than the
refrigerator
compartment door

After leveling the	The refrigerator doors will close smoothly by heightening the front side by adjusting
door height	the height adjusting screw. If the doors do not close correctly, performance may be
	affected.

Next 1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.

2.Install accessories such as the ice cube box, cover evaporating tray, etc., in their proper places. They are packed together to prevent possible damage during shipping.

3.Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet.

7